From: Shankar Rao <shankar.rao@gmail.com>
To: emacs-orgmode@gnu.org
Subject: [PATCH] New function org-speed-command-add for adding/modifying speed commands
Date: Tue, 30 Nov 2021 15:19:08 +0100 [thread overview]
Message-ID: <CAGEgU=gr-d3rHaG_KopXkELxiBjmuvk4tCbVhonTc21UZsWbzw@mail.gmail.com> (raw)
In-Reply-To: <CAGEgU=gm=hRVw6g5wzjEwRx_1=K8haeWZn1KRQtRYWVGi2z-GQ@mail.gmail.com>
[-- Attachment #1: Type: text/plain, Size: 6265 bytes --]
Over the weekend I thought about this issue of configuring
`org-speed-commands' more easily, and I believe I have come up with a
simpler solution that I have provided in the attached patch.
This patch creates a new function `org-speed-command-add' that can be
used to add new speed command shortcuts to `org-speed-commands', as
well as modify existing shortcuts. This function takes as argument an
alist in the same format as `org-speed-commands'. For each command for
which the shortcut key is already present in `org-speed-commands', the
old command is replaced with the new command at the same position.
Commands with brand new shortcut keys are added to the user section of
`org-speed-commands'.
I believe this patch strikes a balance between power users, who can
still directly customize `org-speed-commands', and non-experts, who
may want to add/modify some speed commands without having to
understand the structure and organization of `org-speed-commands'.
Shankar
On Wed, Nov 24, 2021 at 10:36 AM Shankar Rao <shankar.rao@gmail.com> wrote:
>
> Hello all,
>
> I discovered that upgrading to 9.5 broke my configuration because the
> variable `org-speed-commands-user' was removed. I read the thread
> (https://list.orgmode.org/87v9hzzhrn.fsf@gmail.com/) where this change
> was proposed and I completely agree that exposing the whole set of
> `org-speeds-commands' to the user for customization is an improvement
> over the previous state of affairs. However, I believe there were some
> unintended consequences of this change that can make it difficult to
> customize `org-speed-commands' for users that are not elisp gurus.
>
> The main problem is that `org-speed-commands' serves two purposes
> simultaneously:
>
> 1.) It contains all the mappings between speed keys and commands
> 2.) It contains headlines for command categories.
>
> Because of this second purpose, both the contents and order of entries
> in `org-speed-commands' are important. For example, suppose I want to
> replace the usual "n" command with my own. According to the usual
> conventions for alists
> (https://www.gnu.org/software/emacs/manual/html_node/elisp/Association-Lists.html),
> new associations such as this are added to the front of the list. But
> if I do so, by doing something like:
>
> (setq org-speed-commands (cons '("n" . #'my-org-next-heading)
> org-speed-commands))
>
> Then the speed key "n" will show up twice when
> `org-speed-command-help' is invoked. I could first delete the old
> association by replacing `org-speed-commands' in the above with
> `(assoc-delete-all "n" org-speed-commands)', but then my modified
> command will no longer appear in the "Outline Navigation" section of
> the speed command help. Alternatively, I could replace the association
> for "n" using `alist-get':
>
> (setf (alist-get "n" org-speed-commands nil nil #'equal)
> #'my-org-next-heading)
>
> However, this solution won't work for new speed commands (e.g., if I
> want to bind `my-org-next-heading' to "N" instead), because in that
> case `alist-get' will return `nil'.
>
> Below is the relevant portion of my config file where I customize
> `org-speed-commands':
> -----
> (defun alist-set (key value alist-symbol &optional testfn)
> "Set KEY to VALUE in alist referenced by ALIST-SYMBOL.
>
> If KEY is not present in the alist, then add (KEY. VALUE) to the
> front of the alist. Compare keys with TESTFN. Defaults to equal."
> (if-let ((keyval (assoc key (eval alist-symbol) testfn)))
> (setf (cdr keyval) value)
> (set alist-symbol (cons (cons key value) (eval alist-symbol)))))
>
>
> (defvar sbr-org-speed-commands-user '(("User Custom Speed Commands")
> ("N" . ded-org-show-next-heading-tidily)
> ("P" .
> ded-org-show-previous-heading-tidily)
> ("h" . sbr-org-speed-insert-subheading)
> ("u" . org-up-heading-or-item)
> ("b" . org-backward-heading-or-item)
> ("f" . org-forward-heading-or-item)
> ("p" . org-prev-heading-or-item)
> ("n" . org-next-heading-or-item))
> "My custom Org speed commands")
>
> (dolist (keyval (reverse sbr-org-speed-commands-user))
> (alist-set (car keyval) (cdr keyval) 'org-speed-commands))
> -----
>
> As you can see, I defined my own function `alist-set', which modifies
> an association in an alist if the key is already present, or adds the
> new association to the front of the list otherwise. In my opinion,
> functionality like `alist-set' should be built into Emacs itself. My
> code then constructs my own list of custom speed commands with its own
> section header and uses `alist-set' to add/modify speed commands.
> While this code works, it's a bit unsatisfying because
>
> 1.) It relies on my custom `alist-set' function
> 2.) It relies on knowledge of the structure of `org-speed-commands'
>
> More specifically, it requires that my new speed commands need to be
> inserted in reverse order into `org-speed-commands' in order to be
> displayed properly in `org-speed-commands-help'.
>
> I don't know what is the best solution to enable Org users to add
> and/or modify speed commands while also keeping the display of
> `org-speed-commands-help' organized. Here is what I propose:
>
> 1.) Keep the whole set of `org-speed-commands' exposed to user
> customization for power users
> 2.) Bring back `org-speed-commands-user', but instead of just
> appending it to `org-speed-commands' as was done prior to Org 9.5, use
> something like my `alist-set' above to add/modify speed command
> associations as needed while preserving the display order in
> `org-speed-commands-help'.
>
> With my proposal, Org users wouldn't have to concern themselves with
> the section headers in `org-speed-commands', but they would still be
> able to add/modify/remove commands as they wish.
>
> Let me know if anyone has a simpler alternative to achieve these
> goals. If there is sufficient interest in my proposal, I would be
> happy to provide a patch.
>
> Thanks,
> Shankar
[-- Attachment #2: 0001-org-keys-Add-function-org-speed-command-add-to-add-modify-spe.patch --]
[-- Type: application/x-patch, Size: 3999 bytes --]
next prev parent reply other threads:[~2021-11-30 14:27 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-11-24 9:36 Unintended consequences of removing org-speed-commands-user Shankar Rao
2021-11-28 12:15 ` dal-blazej
2021-11-30 12:13 ` Shankar Rao
2021-11-30 14:19 ` Shankar Rao [this message]
2022-05-03 10:24 ` [PATCH] New function org-speed-command-add for adding/modifying speed commands Ihor Radchenko
2022-05-17 13:01 ` Shankar Rao
2022-05-18 13:12 ` Ihor Radchenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
List information: https://www.orgmode.org/
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CAGEgU=gr-d3rHaG_KopXkELxiBjmuvk4tCbVhonTc21UZsWbzw@mail.gmail.com' \
--to=shankar.rao@gmail.com \
--cc=emacs-orgmode@gnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
Code repositories for project(s) associated with this public inbox
https://git.savannah.gnu.org/cgit/emacs/org-mode.git
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).