* BUG: org-beamer-select-environment select multiple environments not working?
@ 2016-05-24 12:45 Rainer M Krug
2016-05-24 20:22 ` Nicolas Goaziou
0 siblings, 1 reply; 7+ messages in thread
From: Rainer M Krug @ 2016-05-24 12:45 UTC (permalink / raw)
To: emacs-orgmode
[-- Attachment #1: Type: text/plain, Size: 975 bytes --]
Hi
It seems that I can not longer select multiple environments at the same
time by using org-beamer-select-environment.
- I am on a header
- I press C-c C-b
- then C-c to enable multiple selections
- press (b)lock and (c)olumn and both are selected
- press [RET] to accept
- only one gets applied (in my case column)
# GNU Emacs 25.0.94.1 (x86_64-apple-darwin15.4.0, Carbon Version 157 AppKit 1404.46) of 2016-05-24
# Org-mode version 8.3.4 (release_8.3.4-842-g58f5def @ /Users/rainerkrug/.emacs.d/org-mode/lisp/)
Cheers,
Rainer
--
Rainer M. Krug, PhD (Conservation Ecology, SUN), MSc (Conservation Biology, UCT), Dipl. Phys. (Germany)
Centre of Excellence for Invasion Biology
Stellenbosch University
South Africa
Tel : +33 - (0)9 53 10 27 44
Cell: +33 - (0)6 85 62 59 98
Fax : +33 - (0)9 58 10 27 44
Fax (D): +49 - (0)3 21 21 25 22 44
email: Rainer@krugs.de
Skype: RMkrug
PGP: 0x0F52F982
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 454 bytes --]
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: BUG: org-beamer-select-environment select multiple environments not working?
2016-05-24 12:45 BUG: org-beamer-select-environment select multiple environments not working? Rainer M Krug
@ 2016-05-24 20:22 ` Nicolas Goaziou
2016-05-24 21:00 ` Rasmus
0 siblings, 1 reply; 7+ messages in thread
From: Nicolas Goaziou @ 2016-05-24 20:22 UTC (permalink / raw)
To: Rainer M Krug; +Cc: emacs-orgmode
Hello,
Rainer M Krug <Rainer@krugs.de> writes:
> It seems that I can not longer select multiple environments at the same
> time by using org-beamer-select-environment.
>
> - I am on a header
> - I press C-c C-b
> - then C-c to enable multiple selections
> - press (b)lock and (c)olumn and both are selected
> - press [RET] to accept
> - only one gets applied (in my case column)
Aren't environments mutually exclusive?
Regards,
--
Nicolas Goaziou
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: BUG: org-beamer-select-environment select multiple environments not working?
2016-05-24 20:22 ` Nicolas Goaziou
@ 2016-05-24 21:00 ` Rasmus
2016-05-25 7:32 ` Rainer M Krug
2016-05-25 20:31 ` Nicolas Goaziou
0 siblings, 2 replies; 7+ messages in thread
From: Rasmus @ 2016-05-24 21:00 UTC (permalink / raw)
To: emacs-orgmode
Nicolas Goaziou <mail@nicolasgoaziou.fr> writes:
> Hello,
>
> Rainer M Krug <Rainer@krugs.de> writes:
>
>> It seems that I can not longer select multiple environments at the same
>> time by using org-beamer-select-environment.
>>
>> - I am on a header
>> - I press C-c C-b
>> - then C-c to enable multiple selections
>> - press (b)lock and (c)olumn and both are selected
>> - press [RET] to accept
>> - only one gets applied (in my case column)
>
> Aren't environments mutually exclusive?
Not necessarily. On the top of my head, you could have a column group
with columns inside. This example used to be possible. I haven't checked
now.
--
A page of history is worth a volume of logic
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: BUG: org-beamer-select-environment select multiple environments not working?
2016-05-24 21:00 ` Rasmus
@ 2016-05-25 7:32 ` Rainer M Krug
2016-05-25 20:31 ` Nicolas Goaziou
1 sibling, 0 replies; 7+ messages in thread
From: Rainer M Krug @ 2016-05-25 7:32 UTC (permalink / raw)
To: Rasmus; +Cc: emacs-orgmode
[-- Attachment #1: Type: text/plain, Size: 1363 bytes --]
Rasmus <rasmus@gmx.us> writes:
> Nicolas Goaziou <mail@nicolasgoaziou.fr> writes:
>
>> Hello,
>>
>> Rainer M Krug <Rainer@krugs.de> writes:
>>
>>> It seems that I can not longer select multiple environments at the same
>>> time by using org-beamer-select-environment.
>>>
>>> - I am on a header
>>> - I press C-c C-b
>>> - then C-c to enable multiple selections
>>> - press (b)lock and (c)olumn and both are selected
>>> - press [RET] to accept
>>> - only one gets applied (in my case column)
>>
>> Aren't environments mutually exclusive?
An environment per level - you might be right.
But one environment *in* another makes sense.
>
> Not necessarily. On the top of my head, you could have a column group
> with columns inside. This example used to be possible. I haven't checked
> now.
So the proper way to do it, would than to have one block environment
encapsulated in a column environment:
** A column :B_column:
*** A Block in a column :B_block:
Makes actually sense, as a column in a block would be something different.
So there is actually no reason to be able to assign multiple
environments to an org header.
Couldn't this than be removed from the dialog?
Also: what does the ! (Groups) mean in the dialog?
Thanks,
Rainer
--
Rainer M. Krug
email: Rainer<at>krugs<dot>de
PGP: 0x0F52F982
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 454 bytes --]
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: BUG: org-beamer-select-environment select multiple environments not working?
2016-05-24 21:00 ` Rasmus
2016-05-25 7:32 ` Rainer M Krug
@ 2016-05-25 20:31 ` Nicolas Goaziou
2016-05-25 20:38 ` John Hendy
1 sibling, 1 reply; 7+ messages in thread
From: Nicolas Goaziou @ 2016-05-25 20:31 UTC (permalink / raw)
To: Rasmus; +Cc: emacs-orgmode
Hello,
Rasmus <rasmus@gmx.us> writes:
> Not necessarily. On the top of my head, you could have a column group
> with columns inside. This example used to be possible. I haven't checked
> now.
This one is not possible anymore. A column environment implies columns.
You can also provide a columns environment explicitly, at a higher
level, e.g., to provide specific options.
Regards,
--
Nicolas Goaziou
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: BUG: org-beamer-select-environment select multiple environments not working?
2016-05-25 20:31 ` Nicolas Goaziou
@ 2016-05-25 20:38 ` John Hendy
2016-05-26 7:18 ` Rainer M Krug
0 siblings, 1 reply; 7+ messages in thread
From: John Hendy @ 2016-05-25 20:38 UTC (permalink / raw)
To: Rasmus, emacs-orgmode
Just to comment on the original attempt, block and column (which is |,
not c which is columnS) are not mutually exclusive. I just did a
presentation and used both together. I'm not sure on the use-case for
columnS, but my structure was two side by side columns in a slide:
#+begin_src org
* slide
** col1 :B_block:BMCOL:
:PROPERTIES:
:BEAMER_env: block
:BEAMER_col: 0.5
:END:
- list
- of
- items
** col2 :B_block:BMCOL:
:PROPERTIES:
:BEAMER_env: block
:BEAMER_col: 0.5
:END:
[[pic]]
#+end_src
Probably not that helpful, just wanted to clarify that some
environments are still compatible (in case someone finds this and
thinks that *all* multiple combos are not possible anymore).
John
On Wed, May 25, 2016 at 3:31 PM, Nicolas Goaziou <mail@nicolasgoaziou.fr> wrote:
> Hello,
>
> Rasmus <rasmus@gmx.us> writes:
>
>> Not necessarily. On the top of my head, you could have a column group
>> with columns inside. This example used to be possible. I haven't checked
>> now.
>
> This one is not possible anymore. A column environment implies columns.
> You can also provide a columns environment explicitly, at a higher
> level, e.g., to provide specific options.
>
> Regards,
>
> --
> Nicolas Goaziou
>
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: BUG: org-beamer-select-environment select multiple environments not working?
2016-05-25 20:38 ` John Hendy
@ 2016-05-26 7:18 ` Rainer M Krug
0 siblings, 0 replies; 7+ messages in thread
From: Rainer M Krug @ 2016-05-26 7:18 UTC (permalink / raw)
To: John Hendy; +Cc: emacs-orgmode, Rasmus
[-- Attachment #1: Type: text/plain, Size: 1573 bytes --]
John Hendy <jw.hendy@gmail.com> writes:
> Just to comment on the original attempt, block and column (which is |,
> not c which is columnS) are not mutually exclusive. I just did a
> presentation and used both together. I'm not sure on the use-case for
> columnS, but my structure was two side by side columns in a slide:
>
> #+begin_src org
> * slide
> ** col1 :B_block:BMCOL:
> :PROPERTIES:
> :BEAMER_env: block
> :BEAMER_col: 0.5
> :END:
>
> - list
> - of
> - items
>
> ** col2 :B_block:BMCOL:
> :PROPERTIES:
> :BEAMER_env: block
> :BEAMER_col: 0.5
> :END:
>
> [[pic]]
> #+end_src
>
> Probably not that helpful, just wanted to clarify that some
> environments are still compatible (in case someone finds this and
> thinks that *all* multiple combos are not possible anymore).
Is it possible that *only B_* environments are mutually exclusive?
Rainer
>
>
> John
>
>
> On Wed, May 25, 2016 at 3:31 PM, Nicolas Goaziou <mail@nicolasgoaziou.fr> wrote:
>> Hello,
>>
>> Rasmus <rasmus@gmx.us> writes:
>>
>>> Not necessarily. On the top of my head, you could have a column group
>>> with columns inside. This example used to be possible. I haven't checked
>>> now.
>>
>> This one is not possible anymore. A column environment implies columns.
>> You can also provide a columns environment explicitly, at a higher
>> level, e.g., to provide specific options.
>>
>> Regards,
>>
>> --
>> Nicolas Goaziou
>>
>
--
Rainer M. Krug
email: Rainer<at>krugs<dot>de
PGP: 0x0F52F982
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 454 bytes --]
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2016-05-26 7:18 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-05-24 12:45 BUG: org-beamer-select-environment select multiple environments not working? Rainer M Krug
2016-05-24 20:22 ` Nicolas Goaziou
2016-05-24 21:00 ` Rasmus
2016-05-25 7:32 ` Rainer M Krug
2016-05-25 20:31 ` Nicolas Goaziou
2016-05-25 20:38 ` John Hendy
2016-05-26 7:18 ` Rainer M Krug
Code repositories for project(s) associated with this public inbox
https://git.savannah.gnu.org/cgit/emacs/org-mode.git
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).