emacs-orgmode@gnu.org archives
 help / color / mirror / code / Atom feed

* orgmode and auctex
@ 2012-02-07 17:55 Christopher Witte
  2012-02-07 18:15 ` Nick Dokos
  0 siblings, 1 reply; 12+ messages in thread
From: Christopher Witte @ 2012-02-07 17:55 UTC (permalink / raw)
  To: Org Mode

[-- Attachment #1: Type: text/plain, Size: 952 bytes --]

I've had a small problem with orgmode and auctex.  Follwing the auctex
quickstart I added the following to my .emacs

(setq-default TeX-master nil)

and then from the orgmode FAQ to setup reftex in orgmode I added the
following

(defun org-mode-reftex-setup ()
  (load-library "reftex")
  (and (buffer-file-name)
       (file-exists-p (buffer-file-name))
       (reftex-parse-all))
  (define-key org-mode-map (kbd "C-c )") 'reftex-citation))
(add-hook 'org-mode-hook 'org-mode-reftex-setup)

With both of these, whenever I opened an org file I was asked to name the
master file.  If I comment out the setq-default I don't get the behaviour I
would like with mulitfile tex files.  My solution was to change

(setq-default TeX-master nil)

to

(add-hook 'TeX-mode-hook (lambda ()
               (setq-default TeX-master nil)))

I then appear to get the behaviour I desire.  Is this a good way to do
this?  If so I might add it to the FAQ.

Cheers
Chris.

[-- Attachment #2: Type: text/html, Size: 1090 bytes --]

^ permalink raw reply	[flat|nested] 12+ messages in thread

• * Re: orgmode and auctex
    2012-02-07 17:55 orgmode and auctex Christopher Witte
  @ 2012-02-07 18:15 ` Nick Dokos
    2012-02-09 16:42   ` Christopher Witte
    0 siblings, 1 reply; 12+ messages in thread
  From: Nick Dokos @ 2012-02-07 18:15 UTC (permalink / raw)
    To: Christopher Witte; +Cc: nicholas.dokos, Org Mode
  
  Christopher Witte <chris@witte.net.au> wrote:
  
  > I've had a small problem with orgmode and auctex.  Follwing the auctex quickstart I added the
  > following to my .emacs
  > 
  > (setq-default TeX-master nil)
  > 
  > and then from the orgmode FAQ to setup reftex in orgmode I added the following
  > 
  > (defun org-mode-reftex-setup ()
  >   (load-library "reftex")
  >   (and (buffer-file-name)
  >        (file-exists-p (buffer-file-name))
  >        (reftex-parse-all))
  >   (define-key org-mode-map (kbd "C-c )") 'reftex-citation))
  > (add-hook 'org-mode-hook 'org-mode-reftex-setup)
  > 
  > With both of these, whenever I opened an org file I was asked to name the master file.  If I comment
  > out the setq-default I don't get the behaviour I would like with mulitfile tex files.  My solution
  > was to change
  > 
  > (setq-default TeX-master nil)
  > 
  > to
  > 
  > (add-hook 'TeX-mode-hook (lambda ()
  >                (setq-default TeX-master nil)))
  > 
  > I then appear to get the behaviour I desire.  Is this a good way to do this?  If so I might add it
  > to the FAQ.
  > 
  
  Probably not. setq-default sets the default value of the variable
  whereas the hook is supposed to set the local value in order to override
  the default value: setting the default value from a hook seems backwards
  to me.
  
  Actually, I added the above code (*without* the TeX-mode-hook mod) to my
  minimal .emacs and opening org files does not generate any questions. Are
  you sure you have diagnosed the problem correctly?
  
  Nick
  
  ^ permalink raw reply	[flat|nested] 12+ messages in thread

• • * Re: orgmode and auctex
      2012-02-07 18:15 ` Nick Dokos
    @ 2012-02-09 16:42   ` Christopher Witte
      2012-02-09 19:59     ` Thomas Alexander Gerds
      0 siblings, 1 reply; 12+ messages in thread
    From: Christopher Witte @ 2012-02-09 16:42 UTC (permalink / raw)
      To: nicholas.dokos; +Cc: Org Mode
    
    [-- Attachment #1: Type: text/plain, Size: 2463 bytes --]
    
    OK so using the setq-default inside a hook is probably not a good idea.
    But I can reliably reproduce this problem, I'm surprised you couldn't.  If
    I start emacs using emacs -Q and open an org file everything is fine.  If I
    then evaluate this
    
    (setq-default TeX-master nil)
    
    (defun org-mode-reftex-setup ()
      (load-library "reftex")
      (and (buffer-file-name)
           (file-exists-p (buffer-file-name))
           (reftex-parse-all))
      (define-key org-mode-map (kbd "C-c )") 'reftex-citation))
    (add-hook 'org-mode-hook 'org-mode-reftex-setup)
    
    and try to open an org file I get prompted "Master file: ~/".  I'm running
    Ubuntu 11.10 and the emacs-snapshot package: GNU Emacs 23.3.1
    (i686-pc-linux-gnu, GTK+ Version 2.24.5), latest org pulled from git today.
    Is there any more information I could provide to help diagnose this problem?
    
    Cheers
    Chris.
    
    On 7 February 2012 19:15, Nick Dokos <nicholas.dokos@hp.com> wrote:
    
    > Christopher Witte <chris@witte.net.au> wrote:
    >
    > > I've had a small problem with orgmode and auctex.  Follwing the auctex
    > quickstart I added the
    > > following to my .emacs
    > >
    > > (setq-default TeX-master nil)
    > >
    > > and then from the orgmode FAQ to setup reftex in orgmode I added the
    > following
    > >
    > > (defun org-mode-reftex-setup ()
    > >   (load-library "reftex")
    > >   (and (buffer-file-name)
    > >        (file-exists-p (buffer-file-name))
    > >        (reftex-parse-all))
    > >   (define-key org-mode-map (kbd "C-c )") 'reftex-citation))
    > > (add-hook 'org-mode-hook 'org-mode-reftex-setup)
    > >
    > > With both of these, whenever I opened an org file I was asked to name
    > the master file.  If I comment
    > > out the setq-default I don't get the behaviour I would like with
    > mulitfile tex files.  My solution
    > > was to change
    > >
    > > (setq-default TeX-master nil)
    > >
    > > to
    > >
    > > (add-hook 'TeX-mode-hook (lambda ()
    > >                (setq-default TeX-master nil)))
    > >
    > > I then appear to get the behaviour I desire.  Is this a good way to do
    > this?  If so I might add it
    > > to the FAQ.
    > >
    >
    > Probably not. setq-default sets the default value of the variable
    > whereas the hook is supposed to set the local value in order to override
    > the default value: setting the default value from a hook seems backwards
    > to me.
    >
    > Actually, I added the above code (*without* the TeX-mode-hook mod) to my
    > minimal .emacs and opening org files does not generate any questions. Are
    > you sure you have diagnosed the problem correctly?
    >
    > Nick
    >
    
    [-- Attachment #2: Type: text/html, Size: 3208 bytes --]
    
    ^ permalink raw reply	[flat|nested] 12+ messages in thread

  • • * Re: orgmode and auctex
        2012-02-09 16:42   ` Christopher Witte
      @ 2012-02-09 19:59     ` Thomas Alexander Gerds
        2012-02-09 20:08       ` Nick Dokos
        0 siblings, 1 reply; 12+ messages in thread
      From: Thomas Alexander Gerds @ 2012-02-09 19:59 UTC (permalink / raw)
        To: Christopher Witte; +Cc: nicholas.dokos, Org Mode
      
      
      Hi Chris,
      
      maybe I cannot follow exactly what you are trying to do, but when I
      start emacs -q and evaluate (setq-default TeX-master nil) and then open
      a new file test.tex, then I get the same prompt "Master file:".
      
      so maybe, if you do not want to get prompted, you could try setting
      (setq-default TeX-master t). 
      
      Cheers
      Tomy
      
      
      
      Christopher Witte <chris@witte.net.au> writes:
      
      > OK so using the setq-default inside a hook is probably not a good
      > idea.
      > But I can reliably reproduce this problem, I'm surprised you couldn't.
      > If
      > I start emacs using emacs -Q and open an org file everything is fine.
      > If I
      > then evaluate this
      >
      > (setq-default TeX-master nil)
      >
      > (defun org-mode-reftex-setup ()
      >   (load-library "reftex")
      >   (and (buffer-file-name)
      >        (file-exists-p (buffer-file-name))
      >        (reftex-parse-all))
      >   (define-key org-mode-map (kbd "C-c )") 'reftex-citation))
      > (add-hook 'org-mode-hook 'org-mode-reftex-setup)
      >
      > and try to open an org file I get prompted "Master file: ~/".  I'm
      > running
      > Ubuntu 11.10 and the emacs-snapshot package: GNU Emacs 23.3.1
      > (i686-pc-linux-gnu, GTK+ Version 2.24.5), latest org pulled from git
      > today.
      > Is there any more information I could provide to help diagnose this
      > problem?
      >
      > Cheers
      > Chris.
      >
      > On 7 February 2012 19:15, Nick Dokos <nicholas.dokos@hp.com> wrote:
      >
      >> Christopher Witte <chris@witte.net.au> wrote:
      >>
      >> > I've had a small problem with orgmode and auctex.  Follwing the
      > auctex
      >> quickstart I added the
      >> > following to my .emacs
      >> >
      >> > (setq-default TeX-master nil)
      >> >
      >> > and then from the orgmode FAQ to setup reftex in orgmode I added
      > the
      >> following
      >> >
      >> > (defun org-mode-reftex-setup ()
      >> >   (load-library "reftex")
      >> >   (and (buffer-file-name)
      >> >        (file-exists-p (buffer-file-name))
      >> >        (reftex-parse-all))
      >> >   (define-key org-mode-map (kbd "C-c )") 'reftex-citation))
      >> > (add-hook 'org-mode-hook 'org-mode-reftex-setup)
      >> >
      >> > With both of these, whenever I opened an org file I was asked to
      > name
      >> the master file.  If I comment
      >> > out the setq-default I don't get the behaviour I would like with
      >> mulitfile tex files.  My solution
      >> > was to change
      >> >
      >> > (setq-default TeX-master nil)
      >> >
      >> > to
      >> >
      >> > (add-hook 'TeX-mode-hook (lambda ()
      >> >                (setq-default TeX-master nil)))
      >> >
      >> > I then appear to get the behaviour I desire.  Is this a good way
      > to do
      >> this?  If so I might add it
      >> > to the FAQ.
      >> >
      >>
      >> Probably not. setq-default sets the default value of the variable
      >> whereas the hook is supposed to set the local value in order to
      > override
      >> the default value: setting the default value from a hook seems
      > backwards
      >> to me.
      >>
      >> Actually, I added the above code (*without* the TeX-mode-hook mod)
      > to my
      >> minimal .emacs and opening org files does not generate any
      > questions. Are
      >> you sure you have diagnosed the problem correctly?
      >>
      >> Nick
      >>
      --
      Thomas A. Gerds -- Assoc. Prof. Department of Biostatistics
      University of Copenhagen, Øster Farimagsgade 5, 1014 Copenhagen, Denmark
      Office: CSS-15.2.07 (Gamle Kommunehospital)
      tel: 35327914 (sec: 35327901) 
      
      ^ permalink raw reply	[flat|nested] 12+ messages in thread

    • • * Re: orgmode and auctex
          2012-02-09 19:59     ` Thomas Alexander Gerds
        @ 2012-02-09 20:08       ` Nick Dokos
          2012-02-11 17:21         ` Christopher Witte
          2012-02-11 17:40         ` Carsten Dominik
          0 siblings, 2 replies; 12+ messages in thread
        From: Nick Dokos @ 2012-02-09 20:08 UTC (permalink / raw)
          To: Thomas Alexander Gerds; +Cc: nicholas.dokos, Org Mode, Christopher Witte
        
        Thomas Alexander Gerds <tagteam@sund.ku.dk> wrote:
        
        > 
        > Hi Chris,
        > 
        > maybe I cannot follow exactly what you are trying to do, but when I
        > start emacs -q and evaluate (setq-default TeX-master nil) and then open
        > a new file test.tex, then I get the same prompt "Master file:".
        > 
        
        I think Chris means that he gets the prompt when he opens a .org file.
        I couldn't reproduce that behavior when I tried it but I have not tried
        it again yet.
        
        Nick
        
        
        > so maybe, if you do not want to get prompted, you could try setting
        > (setq-default TeX-master t). 
        > 
        > Cheers
        > Tomy
        > 
        > 
        > 
        > Christopher Witte <chris@witte.net.au> writes:
        > 
        > > OK so using the setq-default inside a hook is probably not a good
        > > idea.
        > > But I can reliably reproduce this problem, I'm surprised you couldn't.
        > > If
        > > I start emacs using emacs -Q and open an org file everything is fine.
        > > If I
        > > then evaluate this
        > >
        > > (setq-default TeX-master nil)
        > >
        > > (defun org-mode-reftex-setup ()
        > >   (load-library "reftex")
        > >   (and (buffer-file-name)
        > >        (file-exists-p (buffer-file-name))
        > >        (reftex-parse-all))
        > >   (define-key org-mode-map (kbd "C-c )") 'reftex-citation))
        > > (add-hook 'org-mode-hook 'org-mode-reftex-setup)
        > >
        > > and try to open an org file I get prompted "Master file: ~/".  I'm
        > > running
        > > Ubuntu 11.10 and the emacs-snapshot package: GNU Emacs 23.3.1
        > > (i686-pc-linux-gnu, GTK+ Version 2.24.5), latest org pulled from git
        > > today.
        > > Is there any more information I could provide to help diagnose this
        > > problem?
        > >
        > > Cheers
        > > Chris.
        > >
        > > On 7 February 2012 19:15, Nick Dokos <nicholas.dokos@hp.com> wrote:
        > >
        > >> Christopher Witte <chris@witte.net.au> wrote:
        > >>
        > >> > I've had a small problem with orgmode and auctex.  Follwing the
        > > auctex
        > >> quickstart I added the
        > >> > following to my .emacs
        > >> >
        > >> > (setq-default TeX-master nil)
        > >> >
        > >> > and then from the orgmode FAQ to setup reftex in orgmode I added
        > > the
        > >> following
        > >> >
        > >> > (defun org-mode-reftex-setup ()
        > >> >   (load-library "reftex")
        > >> >   (and (buffer-file-name)
        > >> >        (file-exists-p (buffer-file-name))
        > >> >        (reftex-parse-all))
        > >> >   (define-key org-mode-map (kbd "C-c )") 'reftex-citation))
        > >> > (add-hook 'org-mode-hook 'org-mode-reftex-setup)
        > >> >
        > >> > With both of these, whenever I opened an org file I was asked to
        > > name
        > >> the master file.  If I comment
        > >> > out the setq-default I don't get the behaviour I would like with
        > >> mulitfile tex files.  My solution
        > >> > was to change
        > >> >
        > >> > (setq-default TeX-master nil)
        > >> >
        > >> > to
        > >> >
        > >> > (add-hook 'TeX-mode-hook (lambda ()
        > >> >                (setq-default TeX-master nil)))
        > >> >
        > >> > I then appear to get the behaviour I desire.  Is this a good way
        > > to do
        > >> this?  If so I might add it
        > >> > to the FAQ.
        > >> >
        > >>
        > >> Probably not. setq-default sets the default value of the variable
        > >> whereas the hook is supposed to set the local value in order to
        > > override
        > >> the default value: setting the default value from a hook seems
        > > backwards
        > >> to me.
        > >>
        > >> Actually, I added the above code (*without* the TeX-mode-hook mod)
        > > to my
        > >> minimal .emacs and opening org files does not generate any
        > > questions. Are
        > >> you sure you have diagnosed the problem correctly?
        > >>
        > >> Nick
        > >>
        > --
        > Thomas A. Gerds -- Assoc. Prof. Department of Biostatistics
        > University of Copenhagen, Øster Farimagsgade 5, 1014 Copenhagen, Denmark
        > Office: CSS-15.2.07 (Gamle Kommunehospital)
        > tel: 35327914 (sec: 35327901) 
        > 
        
        ^ permalink raw reply	[flat|nested] 12+ messages in thread

      • • * Re: orgmode and auctex
            2012-02-09 20:08       ` Nick Dokos
          @ 2012-02-11 17:21         ` Christopher Witte
            2012-02-11 17:33           ` Nick Dokos
            2012-02-11 17:40         ` Carsten Dominik
            1 sibling, 1 reply; 12+ messages in thread
          From: Christopher Witte @ 2012-02-11 17:21 UTC (permalink / raw)
            To: nicholas.dokos; +Cc: Thomas Alexander Gerds, Org Mode
          
          [-- Attachment #1: Type: text/plain, Size: 4140 bytes --]
          
          Yes, I get this response when I open a .org file. I only want it when I
          open a .tex file.
          
          Cheers,
          Chris
          
          On 9 February 2012 21:08, Nick Dokos <nicholas.dokos@hp.com> wrote:
          
          > Thomas Alexander Gerds <tagteam@sund.ku.dk> wrote:
          >
          > >
          > > Hi Chris,
          > >
          > > maybe I cannot follow exactly what you are trying to do, but when I
          > > start emacs -q and evaluate (setq-default TeX-master nil) and then open
          > > a new file test.tex, then I get the same prompt "Master file:".
          > >
          >
          > I think Chris means that he gets the prompt when he opens a .org file.
          > I couldn't reproduce that behavior when I tried it but I have not tried
          > it again yet.
          >
          > Nick
          >
          >
          > > so maybe, if you do not want to get prompted, you could try setting
          > > (setq-default TeX-master t).
          > >
          > > Cheers
          > > Tomy
          > >
          > >
          > >
          > > Christopher Witte <chris@witte.net.au> writes:
          > >
          > > > OK so using the setq-default inside a hook is probably not a good
          > > > idea.
          > > > But I can reliably reproduce this problem, I'm surprised you couldn't.
          > > > If
          > > > I start emacs using emacs -Q and open an org file everything is fine.
          > > > If I
          > > > then evaluate this
          > > >
          > > > (setq-default TeX-master nil)
          > > >
          > > > (defun org-mode-reftex-setup ()
          > > >   (load-library "reftex")
          > > >   (and (buffer-file-name)
          > > >        (file-exists-p (buffer-file-name))
          > > >        (reftex-parse-all))
          > > >   (define-key org-mode-map (kbd "C-c )") 'reftex-citation))
          > > > (add-hook 'org-mode-hook 'org-mode-reftex-setup)
          > > >
          > > > and try to open an org file I get prompted "Master file: ~/".  I'm
          > > > running
          > > > Ubuntu 11.10 and the emacs-snapshot package: GNU Emacs 23.3.1
          > > > (i686-pc-linux-gnu, GTK+ Version 2.24.5), latest org pulled from git
          > > > today.
          > > > Is there any more information I could provide to help diagnose this
          > > > problem?
          > > >
          > > > Cheers
          > > > Chris.
          > > >
          > > > On 7 February 2012 19:15, Nick Dokos <nicholas.dokos@hp.com> wrote:
          > > >
          > > >> Christopher Witte <chris@witte.net.au> wrote:
          > > >>
          > > >> > I've had a small problem with orgmode and auctex.  Follwing the
          > > > auctex
          > > >> quickstart I added the
          > > >> > following to my .emacs
          > > >> >
          > > >> > (setq-default TeX-master nil)
          > > >> >
          > > >> > and then from the orgmode FAQ to setup reftex in orgmode I added
          > > > the
          > > >> following
          > > >> >
          > > >> > (defun org-mode-reftex-setup ()
          > > >> >   (load-library "reftex")
          > > >> >   (and (buffer-file-name)
          > > >> >        (file-exists-p (buffer-file-name))
          > > >> >        (reftex-parse-all))
          > > >> >   (define-key org-mode-map (kbd "C-c )") 'reftex-citation))
          > > >> > (add-hook 'org-mode-hook 'org-mode-reftex-setup)
          > > >> >
          > > >> > With both of these, whenever I opened an org file I was asked to
          > > > name
          > > >> the master file.  If I comment
          > > >> > out the setq-default I don't get the behaviour I would like with
          > > >> mulitfile tex files.  My solution
          > > >> > was to change
          > > >> >
          > > >> > (setq-default TeX-master nil)
          > > >> >
          > > >> > to
          > > >> >
          > > >> > (add-hook 'TeX-mode-hook (lambda ()
          > > >> >                (setq-default TeX-master nil)))
          > > >> >
          > > >> > I then appear to get the behaviour I desire.  Is this a good way
          > > > to do
          > > >> this?  If so I might add it
          > > >> > to the FAQ.
          > > >> >
          > > >>
          > > >> Probably not. setq-default sets the default value of the variable
          > > >> whereas the hook is supposed to set the local value in order to
          > > > override
          > > >> the default value: setting the default value from a hook seems
          > > > backwards
          > > >> to me.
          > > >>
          > > >> Actually, I added the above code (*without* the TeX-mode-hook mod)
          > > > to my
          > > >> minimal .emacs and opening org files does not generate any
          > > > questions. Are
          > > >> you sure you have diagnosed the problem correctly?
          > > >>
          > > >> Nick
          > > >>
          > > --
          > > Thomas A. Gerds -- Assoc. Prof. Department of Biostatistics
          > > University of Copenhagen, Øster Farimagsgade 5, 1014 Copenhagen, Denmark
          > > Office: CSS-15.2.07 (Gamle Kommunehospital)
          > > tel: 35327914 (sec: 35327901)
          > >
          >
          
          [-- Attachment #2: Type: text/html, Size: 5865 bytes --]
          
          ^ permalink raw reply	[flat|nested] 12+ messages in thread

        • • * Re: orgmode and auctex
              2012-02-11 17:21         ` Christopher Witte
            @ 2012-02-11 17:33           ` Nick Dokos
              0 siblings, 0 replies; 12+ messages in thread
            From: Nick Dokos @ 2012-02-11 17:33 UTC (permalink / raw)
              To: Christopher Witte; +Cc: Thomas Alexander Gerds, nicholas.dokos, Org Mode
            
            Christopher Witte <chris@witte.net.au> wrote:
            
            > Yes, I get this response when I open a .org file. I only want it when I open a .tex file.
            > 
            > Cheers,
            > Chris
            > 
            
            I just reproduced it (no idea why I wasn't able to reproduce it earlier). Stay tuned.
            
            Nick
            
            > On 9 February 2012 21:08, Nick Dokos <nicholas.dokos@hp.com> wrote:
            > 
            >     Thomas Alexander Gerds <tagteam@sund.ku.dk> wrote:
            >    
            >     >
            >     > Hi Chris,
            >     >
            >     > maybe I cannot follow exactly what you are trying to do, but when I
            >     > start emacs -q and evaluate (setq-default TeX-master nil) and then open
            >     > a new file test.tex, then I get the same prompt "Master file:".
            >     >
            >    
            >     I think Chris means that he gets the prompt when he opens a .org file.
            >     I couldn't reproduce that behavior when I tried it but I have not tried
            >     it again yet.
            >    
            >     Nick
            > 
            >     > so maybe, if you do not want to get prompted, you could try setting
            >     > (setq-default TeX-master t).
            >     >
            >     > Cheers
            >     > Tomy
            >     >
            >     >
            >     >
            >     > Christopher Witte <chris@witte.net.au> writes:
            >     >
            >     > > OK so using the setq-default inside a hook is probably not a good
            >     > > idea.
            >     > > But I can reliably reproduce this problem, I'm surprised you couldn't.
            >     > > If
            >     > > I start emacs using emacs -Q and open an org file everything is fine.
            >     > > If I
            >     > > then evaluate this
            >     > >
            >     > > (setq-default TeX-master nil)
            >     > >
            >     > > (defun org-mode-reftex-setup ()
            >     > >   (load-library "reftex")
            >     > >   (and (buffer-file-name)
            >     > >        (file-exists-p (buffer-file-name))
            >     > >        (reftex-parse-all))
            >     > >   (define-key org-mode-map (kbd "C-c )") 'reftex-citation))
            >     > > (add-hook 'org-mode-hook 'org-mode-reftex-setup)
            >     > >
            >     > > and try to open an org file I get prompted "Master file: ~/".  I'm
            >     > > running
            >     > > Ubuntu 11.10 and the emacs-snapshot package: GNU Emacs 23.3.1
            >     > > (i686-pc-linux-gnu, GTK+ Version 2.24.5), latest org pulled from git
            >     > > today.
            >     > > Is there any more information I could provide to help diagnose this
            >     > > problem?
            >     > >
            >     > > Cheers
            >     > > Chris.
            >     > >
            >     > > On 7 February 2012 19:15, Nick Dokos <nicholas.dokos@hp.com> wrote:
            >     > >
            >     > >> Christopher Witte <chris@witte.net.au> wrote:
            >     > >>
            >     > >> > I've had a small problem with orgmode and auctex.  Follwing the
            >     > > auctex
            >     > >> quickstart I added the
            >     > >> > following to my .emacs
            >     > >> >
            >     > >> > (setq-default TeX-master nil)
            >     > >> >
            >     > >> > and then from the orgmode FAQ to setup reftex in orgmode I added
            >     > > the
            >     > >> following
            >     > >> >
            >     > >> > (defun org-mode-reftex-setup ()
            >     > >> >   (load-library "reftex")
            >     > >> >   (and (buffer-file-name)
            >     > >> >        (file-exists-p (buffer-file-name))
            >     > >> >        (reftex-parse-all))
            >     > >> >   (define-key org-mode-map (kbd "C-c )") 'reftex-citation))
            >     > >> > (add-hook 'org-mode-hook 'org-mode-reftex-setup)
            >     > >> >
            >     > >> > With both of these, whenever I opened an org file I was asked to
            >     > > name
            >     > >> the master file.  If I comment
            >     > >> > out the setq-default I don't get the behaviour I would like with
            >     > >> mulitfile tex files.  My solution
            >     > >> > was to change
            >     > >> >
            >     > >> > (setq-default TeX-master nil)
            >     > >> >
            >     > >> > to
            >     > >> >
            >     > >> > (add-hook 'TeX-mode-hook (lambda ()
            >     > >> >                (setq-default TeX-master nil)))
            >     > >> >
            >     > >> > I then appear to get the behaviour I desire.  Is this a good way
            >     > > to do
            >     > >> this?  If so I might add it
            >     > >> > to the FAQ.
            >     > >> >
            >     > >>
            >     > >> Probably not. setq-default sets the default value of the variable
            >     > >> whereas the hook is supposed to set the local value in order to
            >     > > override
            >     > >> the default value: setting the default value from a hook seems
            >     > > backwards
            >     > >> to me.
            >     > >>
            >     > >> Actually, I added the above code (*without* the TeX-mode-hook mod)
            >     > > to my
            >     > >> minimal .emacs and opening org files does not generate any
            >     > > questions. Are
            >     > >> you sure you have diagnosed the problem correctly?
            >     > >>
            >     > >> Nick
            >     > >>
            >     > --
            >     > Thomas A. Gerds -- Assoc. Prof. Department of Biostatistics
            >     > University of Copenhagen, Øster Farimagsgade 5, 1014 Copenhagen, Denmark
            >     > Office: CSS-15.2.07 (Gamle Kommunehospital)
            >     > tel: 35327914 (sec: 35327901)
            >     >
            > 
            > 
            > ----------------------------------------------------
            > Alternatives:
            > 
            > ----------------------------------------------------
            
            ^ permalink raw reply	[flat|nested] 12+ messages in thread

        • * Re: orgmode and auctex
            2012-02-09 20:08       ` Nick Dokos
            2012-02-11 17:21         ` Christopher Witte
          @ 2012-02-11 17:40         ` Carsten Dominik
            2012-02-11 18:11           ` Nick Dokos
            1 sibling, 1 reply; 12+ messages in thread
          From: Carsten Dominik @ 2012-02-11 17:40 UTC (permalink / raw)
            To: nicholas.dokos; +Cc: Thomas Alexander Gerds, Org Mode, Christopher Witte
          
          
          On 9.2.2012, at 21:08, Nick Dokos wrote:
          
          > Thomas Alexander Gerds <tagteam@sund.ku.dk> wrote:
          > 
          >> 
          >> Hi Chris,
          >> 
          >> maybe I cannot follow exactly what you are trying to do, but when I
          >> start emacs -q and evaluate (setq-default TeX-master nil) and then open
          >> a new file test.tex, then I get the same prompt "Master file:".
          >> 
          > 
          > I think Chris means that he gets the prompt when he opens a .org file.
          > I couldn't reproduce that behavior when I tried it but I have not tried
          > it again yet.
          
          I think this prompt comes from the function `reftex-TeX-master-file'.  The
          user is prompted when TeX-master is an existing variable (i.e. AUCTeX
          is loaded), and when its value is nil or `shared'.
          
          Greetings
          
          - Carsten
          
          > 
          > Nick
          > 
          > 
          >> so maybe, if you do not want to get prompted, you could try setting
          >> (setq-default TeX-master t). 
          >> 
          >> Cheers
          >> Tomy
          >> 
          >> 
          >> 
          >> Christopher Witte <chris@witte.net.au> writes:
          >> 
          >>> OK so using the setq-default inside a hook is probably not a good
          >>> idea.
          >>> But I can reliably reproduce this problem, I'm surprised you couldn't.
          >>> If
          >>> I start emacs using emacs -Q and open an org file everything is fine.
          >>> If I
          >>> then evaluate this
          >>> 
          >>> (setq-default TeX-master nil)
          >>> 
          >>> (defun org-mode-reftex-setup ()
          >>>  (load-library "reftex")
          >>>  (and (buffer-file-name)
          >>>       (file-exists-p (buffer-file-name))
          >>>       (reftex-parse-all))
          >>>  (define-key org-mode-map (kbd "C-c )") 'reftex-citation))
          >>> (add-hook 'org-mode-hook 'org-mode-reftex-setup)
          >>> 
          >>> and try to open an org file I get prompted "Master file: ~/".  I'm
          >>> running
          >>> Ubuntu 11.10 and the emacs-snapshot package: GNU Emacs 23.3.1
          >>> (i686-pc-linux-gnu, GTK+ Version 2.24.5), latest org pulled from git
          >>> today.
          >>> Is there any more information I could provide to help diagnose this
          >>> problem?
          >>> 
          >>> Cheers
          >>> Chris.
          >>> 
          >>> On 7 February 2012 19:15, Nick Dokos <nicholas.dokos@hp.com> wrote:
          >>> 
          >>>> Christopher Witte <chris@witte.net.au> wrote:
          >>>> 
          >>>>> I've had a small problem with orgmode and auctex.  Follwing the
          >>> auctex
          >>>> quickstart I added the
          >>>>> following to my .emacs
          >>>>> 
          >>>>> (setq-default TeX-master nil)
          >>>>> 
          >>>>> and then from the orgmode FAQ to setup reftex in orgmode I added
          >>> the
          >>>> following
          >>>>> 
          >>>>> (defun org-mode-reftex-setup ()
          >>>>>  (load-library "reftex")
          >>>>>  (and (buffer-file-name)
          >>>>>       (file-exists-p (buffer-file-name))
          >>>>>       (reftex-parse-all))
          >>>>>  (define-key org-mode-map (kbd "C-c )") 'reftex-citation))
          >>>>> (add-hook 'org-mode-hook 'org-mode-reftex-setup)
          >>>>> 
          >>>>> With both of these, whenever I opened an org file I was asked to
          >>> name
          >>>> the master file.  If I comment
          >>>>> out the setq-default I don't get the behaviour I would like with
          >>>> mulitfile tex files.  My solution
          >>>>> was to change
          >>>>> 
          >>>>> (setq-default TeX-master nil)
          >>>>> 
          >>>>> to
          >>>>> 
          >>>>> (add-hook 'TeX-mode-hook (lambda ()
          >>>>>               (setq-default TeX-master nil)))
          >>>>> 
          >>>>> I then appear to get the behaviour I desire.  Is this a good way
          >>> to do
          >>>> this?  If so I might add it
          >>>>> to the FAQ.
          >>>>> 
          >>>> 
          >>>> Probably not. setq-default sets the default value of the variable
          >>>> whereas the hook is supposed to set the local value in order to
          >>> override
          >>>> the default value: setting the default value from a hook seems
          >>> backwards
          >>>> to me.
          >>>> 
          >>>> Actually, I added the above code (*without* the TeX-mode-hook mod)
          >>> to my
          >>>> minimal .emacs and opening org files does not generate any
          >>> questions. Are
          >>>> you sure you have diagnosed the problem correctly?
          >>>> 
          >>>> Nick
          >>>> 
          >> --
          >> Thomas A. Gerds -- Assoc. Prof. Department of Biostatistics
          >> University of Copenhagen, Øster Farimagsgade 5, 1014 Copenhagen, Denmark
          >> Office: CSS-15.2.07 (Gamle Kommunehospital)
          >> tel: 35327914 (sec: 35327901) 
          >> 
          > 
          
          ^ permalink raw reply	[flat|nested] 12+ messages in thread

        • • * Re: orgmode and auctex
              2012-02-11 17:40         ` Carsten Dominik
            @ 2012-02-11 18:11           ` Nick Dokos
              2012-02-20 12:57             ` Christopher Witte
              0 siblings, 1 reply; 12+ messages in thread
            From: Nick Dokos @ 2012-02-11 18:11 UTC (permalink / raw)
              To: Carsten Dominik
              Cc: Thomas Alexander Gerds, nicholas.dokos, Org Mode,
            	Christopher Witte
            
            Carsten Dominik <carsten.dominik@gmail.com> wrote:
            
            > 
            > On 9.2.2012, at 21:08, Nick Dokos wrote:
            > 
            > > Thomas Alexander Gerds <tagteam@sund.ku.dk> wrote:
            > > 
            > >> 
            > >> Hi Chris,
            > >> 
            > >> maybe I cannot follow exactly what you are trying to do, but when I
            > >> start emacs -q and evaluate (setq-default TeX-master nil) and then open
            > >> a new file test.tex, then I get the same prompt "Master file:".
            > >> 
            > > 
            > > I think Chris means that he gets the prompt when he opens a .org file.
            > > I couldn't reproduce that behavior when I tried it but I have not tried
            > > it again yet.
            > 
            > I think this prompt comes from the function `reftex-TeX-master-file'. 
            > 
            
            Indeed - the backtrace is as follows:
            
              ...
              completing-read-default("Master file: " read-file-name-internal file-exists-p t "~/src/org/" file-name-history "~/src/org/foo.org" nil)
              completing-read("Master file: " read-file-name-internal file-exists-p t "~/src/org/" file-name-history "~/src/org/foo.org")
              read-file-name-default("Master file: " nil nil t nil nil)
              read-file-name("Master file: " nil nil t nil)
              reftex-TeX-master-file()
              reftex-tie-multifile-symbols()
              reftex-access-scan-info((16))
              reftex-parse-all()
              (and (buffer-file-name) (file-exists-p (buffer-file-name)) (reftex-parse-all))
              org-mode-reftex-setup()
              run-hooks(change-major-mode-after-body-hook text-mode-hook outline-mode-hook org-mode-hook)
              apply(run-hooks (change-major-mode-after-body-hook text-mode-hook outline-mode-hook org-mode-hook))
              run-mode-hooks(org-mode-hook)
              org-mode()
              set-auto-mode-0(org-mode nil)
              set-auto-mode()
              normal-mode(t)
              after-find-file(nil t)
              find-file-noselect-1(#<buffer foo.org> "~/src/org/foo.org" nil nil "~/src/org/foo.org" (3018153 2055))
              find-file-noselect("~/src/org/foo.org" nil nil t)
              find-file("~/src/org/foo.org" t)
              call-interactively(find-file nil nil)
            
            
            > The user is prompted when TeX-master is an existing variable
            > (i.e. AUCTeX is loaded), and when its value is nil or `shared'.
            
            It's actually a bit more complicated than that: it checks if
            TeX-master-file is defined as a function (i.e. AUCTEX is loaded) and if
            so calls it. It then checks if tex-main-file is defined as a function
            (i.e. Emacs LaTeX mode is loaded) and if so calls it. Then it check if
            TeX-master is t (in which case (buffer-file-name) is called to set the
            master, or 'shared (in which case it reads the file name) or non-nil (in
            which case it is used verbatim) or nil (in which case it reads the file
            name - the operative case here).
            
            I'll leave it here for now: I've been sick for a couple of days and I
            can't think straight right now (or ever...)
            
            Nick
            
            
            > Greetings
            > 
            > - Carsten
            > 
            > > 
            > > Nick
            > > 
            > > 
            > >> so maybe, if you do not want to get prompted, you could try setting
            > >> (setq-default TeX-master t). 
            > >> 
            > >> Cheers
            > >> Tomy
            > >> 
            > >> 
            > >> 
            > >> Christopher Witte <chris@witte.net.au> writes:
            > >> 
            > >>> OK so using the setq-default inside a hook is probably not a good
            > >>> idea.
            > >>> But I can reliably reproduce this problem, I'm surprised you couldn't.
            > >>> If
            > >>> I start emacs using emacs -Q and open an org file everything is fine.
            > >>> If I
            > >>> then evaluate this
            > >>> 
            > >>> (setq-default TeX-master nil)
            > >>> 
            > >>> (defun org-mode-reftex-setup ()
            > >>>  (load-library "reftex")
            > >>>  (and (buffer-file-name)
            > >>>       (file-exists-p (buffer-file-name))
            > >>>       (reftex-parse-all))
            > >>>  (define-key org-mode-map (kbd "C-c )") 'reftex-citation))
            > >>> (add-hook 'org-mode-hook 'org-mode-reftex-setup)
            > >>> 
            > >>> and try to open an org file I get prompted "Master file: ~/".  I'm
            > >>> running
            > >>> Ubuntu 11.10 and the emacs-snapshot package: GNU Emacs 23.3.1
            > >>> (i686-pc-linux-gnu, GTK+ Version 2.24.5), latest org pulled from git
            > >>> today.
            > >>> Is there any more information I could provide to help diagnose this
            > >>> problem?
            > >>> 
            > >>> Cheers
            > >>> Chris.
            > >>> 
            > >>> On 7 February 2012 19:15, Nick Dokos <nicholas.dokos@hp.com> wrote:
            > >>> 
            > >>>> Christopher Witte <chris@witte.net.au> wrote:
            > >>>> 
            > >>>>> I've had a small problem with orgmode and auctex.  Follwing the
            > >>> auctex
            > >>>> quickstart I added the
            > >>>>> following to my .emacs
            > >>>>> 
            > >>>>> (setq-default TeX-master nil)
            > >>>>> 
            > >>>>> and then from the orgmode FAQ to setup reftex in orgmode I added
            > >>> the
            > >>>> following
            > >>>>> 
            > >>>>> (defun org-mode-reftex-setup ()
            > >>>>>  (load-library "reftex")
            > >>>>>  (and (buffer-file-name)
            > >>>>>       (file-exists-p (buffer-file-name))
            > >>>>>       (reftex-parse-all))
            > >>>>>  (define-key org-mode-map (kbd "C-c )") 'reftex-citation))
            > >>>>> (add-hook 'org-mode-hook 'org-mode-reftex-setup)
            > >>>>> 
            > >>>>> With both of these, whenever I opened an org file I was asked to
            > >>> name
            > >>>> the master file.  If I comment
            > >>>>> out the setq-default I don't get the behaviour I would like with
            > >>>> mulitfile tex files.  My solution
            > >>>>> was to change
            > >>>>> 
            > >>>>> (setq-default TeX-master nil)
            > >>>>> 
            > >>>>> to
            > >>>>> 
            > >>>>> (add-hook 'TeX-mode-hook (lambda ()
            > >>>>>               (setq-default TeX-master nil)))
            > >>>>> 
            > >>>>> I then appear to get the behaviour I desire.  Is this a good way
            > >>> to do
            > >>>> this?  If so I might add it
            > >>>>> to the FAQ.
            > >>>>> 
            > >>>> 
            > >>>> Probably not. setq-default sets the default value of the variable
            > >>>> whereas the hook is supposed to set the local value in order to
            > >>> override
            > >>>> the default value: setting the default value from a hook seems
            > >>> backwards
            > >>>> to me.
            > >>>> 
            > >>>> Actually, I added the above code (*without* the TeX-mode-hook mod)
            > >>> to my
            > >>>> minimal .emacs and opening org files does not generate any
            > >>> questions. Are
            > >>>> you sure you have diagnosed the problem correctly?
            > >>>> 
            > >>>> Nick
            > >>>> 
            > >> --
            > >> Thomas A. Gerds -- Assoc. Prof. Department of Biostatistics
            > >> University of Copenhagen, Øster Farimagsgade 5, 1014 Copenhagen, Denmark
            > >> Office: CSS-15.2.07 (Gamle Kommunehospital)
            > >> tel: 35327914 (sec: 35327901) 
            > >> 
            > > 
            > 
            > 
            
            ^ permalink raw reply	[flat|nested] 12+ messages in thread

          • • * Re: orgmode and auctex
                2012-02-11 18:11           ` Nick Dokos
              @ 2012-02-20 12:57             ` Christopher Witte
                2012-02-24  5:34               ` Nick Dokos
                0 siblings, 1 reply; 12+ messages in thread
              From: Christopher Witte @ 2012-02-20 12:57 UTC (permalink / raw)
                To: nicholas.dokos; +Cc: Thomas Alexander Gerds, Org Mode, Carsten Dominik
              
              [-- Attachment #1: Type: text/plain, Size: 7512 bytes --]
              
              Hi all,
              
              (setq TeX-auto-save t)
              (setq TeX-parse-self t)
              (setq-default TeX-master nil)
              (make-variable-buffer-local 'TeX-master) ;; I think this is need because
              the variable is not buffer local until Auctex is active
              
              (defun org-mode-reftex-setup ()
                (setq TeX-master t)
                (load-library "reftex")
                (and (buffer-file-name)
                     (file-exists-p (buffer-file-name))
                     (progn
                   (reftex-parse-all)
                   (reftex-set-cite-format "[[cite:%l][%l]]")))
                (define-key org-mode-map (kbd "C-c )") 'reftex-citation)
                (define-key org-mode-map (kbd "C-c (") 'org-mode-reftex-search))
              (add-hook 'org-mode-hook 'org-mode-reftex-setup)
              
              This appears to work for me.  This should make the buffer local version of
              TeX-master "t" for all org buffer and keep it the default otherwise.  Is
              this a good way to work around this problem?
              
              Cheers,
              Chris.
              
              
              
              On 11 February 2012 19:11, Nick Dokos <nicholas.dokos@hp.com> wrote:
              
              > Carsten Dominik <carsten.dominik@gmail.com> wrote:
              >
              > >
              > > On 9.2.2012, at 21:08, Nick Dokos wrote:
              > >
              > > > Thomas Alexander Gerds <tagteam@sund.ku.dk> wrote:
              > > >
              > > >>
              > > >> Hi Chris,
              > > >>
              > > >> maybe I cannot follow exactly what you are trying to do, but when I
              > > >> start emacs -q and evaluate (setq-default TeX-master nil) and then
              > open
              > > >> a new file test.tex, then I get the same prompt "Master file:".
              > > >>
              > > >
              > > > I think Chris means that he gets the prompt when he opens a .org file.
              > > > I couldn't reproduce that behavior when I tried it but I have not tried
              > > > it again yet.
              > >
              > > I think this prompt comes from the function `reftex-TeX-master-file'.
              > >
              >
              > Indeed - the backtrace is as follows:
              >
              >  ...
              >  completing-read-default("Master file: " read-file-name-internal
              > file-exists-p t "~/src/org/" file-name-history "~/src/org/foo.org" nil)
              >  completing-read("Master file: " read-file-name-internal file-exists-p t
              > "~/src/org/" file-name-history "~/src/org/foo.org")
              >  read-file-name-default("Master file: " nil nil t nil nil)
              >  read-file-name("Master file: " nil nil t nil)
              >  reftex-TeX-master-file()
              >  reftex-tie-multifile-symbols()
              >  reftex-access-scan-info((16))
              >  reftex-parse-all()
              >   (and (buffer-file-name) (file-exists-p (buffer-file-name))
              > (reftex-parse-all))
              >   org-mode-reftex-setup()
              >  run-hooks(change-major-mode-after-body-hook text-mode-hook
              > outline-mode-hook org-mode-hook)
              >  apply(run-hooks (change-major-mode-after-body-hook text-mode-hook
              > outline-mode-hook org-mode-hook))
              >  run-mode-hooks(org-mode-hook)
              >  org-mode()
              >  set-auto-mode-0(org-mode nil)
              >  set-auto-mode()
              >  normal-mode(t)
              >  after-find-file(nil t)
              >  find-file-noselect-1(#<buffer foo.org> "~/src/org/foo.org" nil nil
              > "~/src/org/foo.org" (3018153 2055))
              >  find-file-noselect("~/src/org/foo.org" nil nil t)
              >  find-file("~/src/org/foo.org" t)
              >  call-interactively(find-file nil nil)
              >
              >
              > > The user is prompted when TeX-master is an existing variable
              > > (i.e. AUCTeX is loaded), and when its value is nil or `shared'.
              >
              > It's actually a bit more complicated than that: it checks if
              > TeX-master-file is defined as a function (i.e. AUCTEX is loaded) and if
              > so calls it. It then checks if tex-main-file is defined as a function
              > (i.e. Emacs LaTeX mode is loaded) and if so calls it. Then it check if
              > TeX-master is t (in which case (buffer-file-name) is called to set the
              > master, or 'shared (in which case it reads the file name) or non-nil (in
              > which case it is used verbatim) or nil (in which case it reads the file
              > name - the operative case here).
              >
              > I'll leave it here for now: I've been sick for a couple of days and I
              > can't think straight right now (or ever...)
              >
              > Nick
              >
              >
              > > Greetings
              > >
              > > - Carsten
              > >
              > > >
              > > > Nick
              > > >
              > > >
              > > >> so maybe, if you do not want to get prompted, you could try setting
              > > >> (setq-default TeX-master t).
              > > >>
              > > >> Cheers
              > > >> Tomy
              > > >>
              > > >>
              > > >>
              > > >> Christopher Witte <chris@witte.net.au> writes:
              > > >>
              > > >>> OK so using the setq-default inside a hook is probably not a good
              > > >>> idea.
              > > >>> But I can reliably reproduce this problem, I'm surprised you
              > couldn't.
              > > >>> If
              > > >>> I start emacs using emacs -Q and open an org file everything is fine.
              > > >>> If I
              > > >>> then evaluate this
              > > >>>
              > > >>> (setq-default TeX-master nil)
              > > >>>
              > > >>> (defun org-mode-reftex-setup ()
              > > >>>  (load-library "reftex")
              > > >>>  (and (buffer-file-name)
              > > >>>       (file-exists-p (buffer-file-name))
              > > >>>       (reftex-parse-all))
              > > >>>  (define-key org-mode-map (kbd "C-c )") 'reftex-citation))
              > > >>> (add-hook 'org-mode-hook 'org-mode-reftex-setup)
              > > >>>
              > > >>> and try to open an org file I get prompted "Master file: ~/".  I'm
              > > >>> running
              > > >>> Ubuntu 11.10 and the emacs-snapshot package: GNU Emacs 23.3.1
              > > >>> (i686-pc-linux-gnu, GTK+ Version 2.24.5), latest org pulled from git
              > > >>> today.
              > > >>> Is there any more information I could provide to help diagnose this
              > > >>> problem?
              > > >>>
              > > >>> Cheers
              > > >>> Chris.
              > > >>>
              > > >>> On 7 February 2012 19:15, Nick Dokos <nicholas.dokos@hp.com> wrote:
              > > >>>
              > > >>>> Christopher Witte <chris@witte.net.au> wrote:
              > > >>>>
              > > >>>>> I've had a small problem with orgmode and auctex.  Follwing the
              > > >>> auctex
              > > >>>> quickstart I added the
              > > >>>>> following to my .emacs
              > > >>>>>
              > > >>>>> (setq-default TeX-master nil)
              > > >>>>>
              > > >>>>> and then from the orgmode FAQ to setup reftex in orgmode I added
              > > >>> the
              > > >>>> following
              > > >>>>>
              > > >>>>> (defun org-mode-reftex-setup ()
              > > >>>>>  (load-library "reftex")
              > > >>>>>  (and (buffer-file-name)
              > > >>>>>       (file-exists-p (buffer-file-name))
              > > >>>>>       (reftex-parse-all))
              > > >>>>>  (define-key org-mode-map (kbd "C-c )") 'reftex-citation))
              > > >>>>> (add-hook 'org-mode-hook 'org-mode-reftex-setup)
              > > >>>>>
              > > >>>>> With both of these, whenever I opened an org file I was asked to
              > > >>> name
              > > >>>> the master file.  If I comment
              > > >>>>> out the setq-default I don't get the behaviour I would like with
              > > >>>> mulitfile tex files.  My solution
              > > >>>>> was to change
              > > >>>>>
              > > >>>>> (setq-default TeX-master nil)
              > > >>>>>
              > > >>>>> to
              > > >>>>>
              > > >>>>> (add-hook 'TeX-mode-hook (lambda ()
              > > >>>>>               (setq-default TeX-master nil)))
              > > >>>>>
              > > >>>>> I then appear to get the behaviour I desire.  Is this a good way
              > > >>> to do
              > > >>>> this?  If so I might add it
              > > >>>>> to the FAQ.
              > > >>>>>
              > > >>>>
              > > >>>> Probably not. setq-default sets the default value of the variable
              > > >>>> whereas the hook is supposed to set the local value in order to
              > > >>> override
              > > >>>> the default value: setting the default value from a hook seems
              > > >>> backwards
              > > >>>> to me.
              > > >>>>
              > > >>>> Actually, I added the above code (*without* the TeX-mode-hook mod)
              > > >>> to my
              > > >>>> minimal .emacs and opening org files does not generate any
              > > >>> questions. Are
              > > >>>> you sure you have diagnosed the problem correctly?
              > > >>>>
              > > >>>> Nick
              > > >>>>
              > > >> --
              > > >> Thomas A. Gerds -- Assoc. Prof. Department of Biostatistics
              > > >> University of Copenhagen, Øster Farimagsgade 5, 1014 Copenhagen,
              > Denmark
              > > >> Office: CSS-15.2.07 (Gamle Kommunehospital)
              > > >> tel: 35327914 (sec: 35327901)
              > > >>
              > > >
              > >
              > >
              >
              
              [-- Attachment #2: Type: text/html, Size: 10841 bytes --]
              
              ^ permalink raw reply	[flat|nested] 12+ messages in thread

            • • * Re: orgmode and auctex
                  2012-02-20 12:57             ` Christopher Witte
                @ 2012-02-24  5:34               ` Nick Dokos
                  2012-02-24  8:57                 ` Christopher Witte
                  0 siblings, 1 reply; 12+ messages in thread
                From: Nick Dokos @ 2012-02-24  5:34 UTC (permalink / raw)
                  To: Christopher Witte
                  Cc: Thomas Alexander Gerds, nicholas.dokos, Org Mode, Carsten Dominik
                
                Christopher Witte <chris@witte.net.au> wrote:
                
                > Hi all,
                > 
                > (setq TeX-auto-save t)
                > (setq TeX-parse-self t)
                > (setq-default TeX-master nil)
                > (make-variable-buffer-local 'TeX-master) ;; I think this is need because the variable is not buffer
                > local until Auctex is active
                > 
                > (defun org-mode-reftex-setup ()
                >   (setq TeX-master t)
                >   (load-library "reftex")
                >   (and (buffer-file-name)
                >        (file-exists-p (buffer-file-name))
                >        (progn
                >      (reftex-parse-all)
                >      (reftex-set-cite-format "[[cite:%l][%l]]")))
                >   (define-key org-mode-map (kbd "C-c )") 'reftex-citation)
                >   (define-key org-mode-map (kbd "C-c (") 'org-mode-reftex-search))
                > (add-hook 'org-mode-hook 'org-mode-reftex-setup)
                > 
                > This appears to work for me.  This should make the buffer local version of TeX-master "t" for all
                > org buffer and keep it the default otherwise.  Is this a good way to work around this problem?
                > 
                
                I think so - at least, I can't think of a better way.
                
                Nick
                
                ^ permalink raw reply	[flat|nested] 12+ messages in thread

              • • * Re: orgmode and auctex
                    2012-02-24  5:34               ` Nick Dokos
                  @ 2012-02-24  8:57                 ` Christopher Witte
                    0 siblings, 0 replies; 12+ messages in thread
                  From: Christopher Witte @ 2012-02-24  8:57 UTC (permalink / raw)
                    To: nicholas.dokos; +Cc: Org Mode, Carsten Dominik
                  
                  [-- Attachment #1: Type: text/plain, Size: 1203 bytes --]
                  
                  It's been working for me so far so I think I'll stick with it.
                  Thanks for all your help.
                  
                  Chris.
                  
                  On 24 February 2012 06:34, Nick Dokos <nicholas.dokos@hp.com> wrote:
                  
                  > Christopher Witte <chris@witte.net.au> wrote:
                  >
                  > > Hi all,
                  > >
                  > > (setq TeX-auto-save t)
                  > > (setq TeX-parse-self t)
                  > > (setq-default TeX-master nil)
                  > > (make-variable-buffer-local 'TeX-master) ;; I think this is need because
                  > the variable is not buffer
                  > > local until Auctex is active
                  > >
                  > > (defun org-mode-reftex-setup ()
                  > >   (setq TeX-master t)
                  > >   (load-library "reftex")
                  > >   (and (buffer-file-name)
                  > >        (file-exists-p (buffer-file-name))
                  > >        (progn
                  > >      (reftex-parse-all)
                  > >      (reftex-set-cite-format "[[cite:%l][%l]]")))
                  > >   (define-key org-mode-map (kbd "C-c )") 'reftex-citation)
                  > >   (define-key org-mode-map (kbd "C-c (") 'org-mode-reftex-search))
                  > > (add-hook 'org-mode-hook 'org-mode-reftex-setup)
                  > >
                  > > This appears to work for me.  This should make the buffer local version
                  > of TeX-master "t" for all
                  > > org buffer and keep it the default otherwise.  Is this a good way to
                  > work around this problem?
                  > >
                  >
                  > I think so - at least, I can't think of a better way.
                  >
                  > Nick
                  >
                  
                  [-- Attachment #2: Type: text/html, Size: 1804 bytes --]
                  
                  ^ permalink raw reply	[flat|nested] 12+ messages in thread

end of thread, other threads:[~2012-02-24  8:57 UTC | newest]

Thread overview: 12+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2012-02-07 17:55 orgmode and auctex Christopher Witte
2012-02-07 18:15 ` Nick Dokos
2012-02-09 16:42   ` Christopher Witte
2012-02-09 19:59     ` Thomas Alexander Gerds
2012-02-09 20:08       ` Nick Dokos
2012-02-11 17:21         ` Christopher Witte
2012-02-11 17:33           ` Nick Dokos
2012-02-11 17:40         ` Carsten Dominik
2012-02-11 18:11           ` Nick Dokos
2012-02-20 12:57             ` Christopher Witte
2012-02-24  5:34               ` Nick Dokos
2012-02-24  8:57                 ` Christopher Witte

Code repositories for project(s) associated with this public inbox

	https://git.savannah.gnu.org/cgit/emacs/org-mode.git

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).