* how can i get 3 section levels instead of just 2?
@ 2012-09-09 10:27 Robert P. J. Day
2012-09-09 11:40 ` Fabrice Popineau
0 siblings, 1 reply; 4+ messages in thread
From: Robert P. J. Day @ 2012-09-09 10:27 UTC (permalink / raw)
To: emacs org-mode mailing list
i've puzzled over the manual and can't seem to find the switch to
give me 3 section levels rather than the 2 i'm getting now. section
11.1 in the manual reads:
=== start
Headings and sections
The outline structure of the document as described in Document
Structure, forms the basis for defining sections of the exported
document. However, since the outline structure is also used for (for
example) lists of tasks, only the first three outline levels will be
used as headings. Deeper levels will become itemized lists. You can
change the location of this switch globally by setting the variable
org-export-headline-levels, or on a per-file basis with a line
#+OPTIONS: H:4
=== end
well, here's the entirety of my .org source file:
=== start
#+LaTeX_CLASS: beamer
#+MACRO: BEAMERMODE presentation
#+MACRO: BEAMERTHEME Antibes
#+MACRO: BEAMERCOLORTHEME lily
#+MACRO: BEAMERSUBJECT RMRF
#+MACRO: BEAMERINSTITUTE Opersys, Inc.
#+TITLE: Linux Device Drivers
#+AUTHOR: Karim Yaghmour, Robert P. J. Day
#+OPTIONS: H:3
* Course structure and presentation
** About the instructors
** Course goals
** Presentation format
** Pre-requisites
** Day-by-day outline
*** Day 1
stuff
*** Day 2
more stuff
*** Day 3
even more stuff
=== end
yet when i generate the PDF, the "Day 1" and "Day 2" entries show up
as list items, not (level 3) subsubsections. more confusingly, the
user manual above seems to suggest that three levels is the default in
the first place. is there something else i need to add to, say, my
.emacs customization?
i'm sure there's something trivially stupid i've done, but that
section in the manual seems pretty clear that that's the only change i
need to make, so if there's something else that has to be done, it
should be mentioned there as well.
rday
--
========================================================================
Robert P. J. Day Ottawa, Ontario, CANADA
http://crashcourse.ca
Twitter: http://twitter.com/rpjday
LinkedIn: http://ca.linkedin.com/in/rpjday
========================================================================
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: how can i get 3 section levels instead of just 2?
2012-09-09 10:27 how can i get 3 section levels instead of just 2? Robert P. J. Day
@ 2012-09-09 11:40 ` Fabrice Popineau
2012-09-09 11:47 ` Nicolas Goaziou
0 siblings, 1 reply; 4+ messages in thread
From: Fabrice Popineau @ 2012-09-09 11:40 UTC (permalink / raw)
To: Robert P. J. Day; +Cc: emacs org-mode mailing list
[-- Attachment #1: Type: text/plain, Size: 637 bytes --]
Use :
(require 'org-export)
(require 'org-e-latex)
(require 'org-e-beamer)
M-x org-e-beamer-mode
(to edit your slides)
and
M-x org-e-beamer-export-to-pdf
to generate the pdf.
Should work with H:3, I'm using it.
Generally speaking, the new exporter seems more reliable than the regular
one
albeit there may be some discrepancies (sometimes, I need to kill my org
buffer and
visit the file again).
Fabrice
2012/9/9 Robert P. J. Day <rpjday@crashcourse.ca>
> i've puzzled over the manual and can't seem to find the switch to
> give me 3 section levels rather than the 2 i'm getting now. section
> 11.1 in the manual reads:
>
>
[-- Attachment #2: Type: text/html, Size: 1172 bytes --]
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: how can i get 3 section levels instead of just 2?
2012-09-09 11:40 ` Fabrice Popineau
@ 2012-09-09 11:47 ` Nicolas Goaziou
2012-09-09 12:12 ` Fabrice Popineau
0 siblings, 1 reply; 4+ messages in thread
From: Nicolas Goaziou @ 2012-09-09 11:47 UTC (permalink / raw)
To: Fabrice Popineau; +Cc: Robert P. J. Day, emacs org-mode mailing list
Hello,
Fabrice Popineau <fabrice.popineau@supelec.fr> writes:
> Use :
>
> (require 'org-export)
> (require 'org-e-latex)
> (require 'org-e-beamer)
Actually, only (require 'org-e-beamer) is required as this will trigger
automatically the two steps above.
> M-x org-e-beamer-mode
> (to edit your slides)
>
> and
>
> M-x org-e-beamer-export-to-pdf
>
> to generate the pdf.
Once `org-e-beamer' is loaded, it should also be accessible with:
M-x org-export-dispatch
with a very recent Org (and a fresh Emacs session).
> Generally speaking, the new exporter seems more reliable than the regular
> one
> albeit there may be some discrepancies (sometimes, I need to kill my org
> buffer and
> visit the file again).
Could you describe what happens exactly? Also, do you have an ECM for
that?
Regards,
--
Nicolas Goaziou
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: how can i get 3 section levels instead of just 2?
2012-09-09 11:47 ` Nicolas Goaziou
@ 2012-09-09 12:12 ` Fabrice Popineau
0 siblings, 0 replies; 4+ messages in thread
From: Fabrice Popineau @ 2012-09-09 12:12 UTC (permalink / raw)
To: Nicolas Goaziou; +Cc: Robert P. J. Day, emacs org-mode mailing list
[-- Attachment #1: Type: text/plain, Size: 970 bytes --]
>
> > Generally speaking, the new exporter seems more reliable than the regular
> > one
> > albeit there may be some discrepancies (sometimes, I need to kill my org
> > buffer and
> > visit the file again).
>
> Could you describe what happens exactly? Also, do you have an ECM for
> that?
>
>
What was happening is that exporting to TeX sometimes failed with various
type errors related to what
the parser finds in the buffer (nil instead of string, or something else
instead of face attribute).
Unfortunately, I don't have an ECM.
What's worse is that killing the buffer and restarting with the
same file usually works.
What's better is that it seems to happen much less frequently these days
(because the batch of recent fixes ?)
I don't know if it is related but sometimes, tags like :B_ignoreheading:
weren't recognized properly.
I had to remove them and to reinstall them (C-c C-b i twice).
I'll let you know if this behaviour happens again.
Greetings,
Fabrice
[-- Attachment #2: Type: text/html, Size: 1399 bytes --]
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2012-09-09 12:13 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2012-09-09 10:27 how can i get 3 section levels instead of just 2? Robert P. J. Day
2012-09-09 11:40 ` Fabrice Popineau
2012-09-09 11:47 ` Nicolas Goaziou
2012-09-09 12:12 ` Fabrice Popineau
Code repositories for project(s) associated with this public inbox
https://git.savannah.gnu.org/cgit/emacs/org-mode.git
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).