* Limit on length of babel block #+name: value?
@ 2013-05-16 4:41 John Hendy
2013-05-16 7:02 ` Christian Moe
2013-05-16 12:08 ` Eric Schulte
0 siblings, 2 replies; 4+ messages in thread
From: John Hendy @ 2013-05-16 4:41 UTC (permalink / raw)
To: emacs-orgmode
I was just completely baffled for about 5-10 straight minutes as to
why my block was not producing a results section with my generated
graphics file from an R block.
I kept double checking my header options one by one despite having
simply copied/pasted/modified it from a previous working block. Turns
out it appears that #+name has a character limit!
This (on Org-mode version 8.0.2 (release_8.0.2-65-g1e32d7)), doesn't work:
#+name: improvement-treatment
It appears the name can be 20 characters long (the above is 21).
Is this by design or something I accidentally uncovered? Forgive me if
it's come up before or is documented. I did a couple searches but
didn't see it.
Thanks,
John
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: Limit on length of babel block #+name: value?
2013-05-16 4:41 Limit on length of babel block #+name: value? John Hendy
@ 2013-05-16 7:02 ` Christian Moe
2013-05-16 12:08 ` Eric Schulte
1 sibling, 0 replies; 4+ messages in thread
From: Christian Moe @ 2013-05-16 7:02 UTC (permalink / raw)
To: John Hendy; +Cc: emacs-orgmode
Hi,
I cannot reproduce this on 8.0.2, at least not with the info
provided. E.g., the following works fine:
#+name: improvement-treatment
#+begin_src R :results graphics :file test.png
x <- 1:10
y <- x^2
plot(x, y)
#+end_src
#+RESULTS: improvement-treatment
[[file:test.png]]
So does any variation with an arbitrarily long string as NAME.
Yours,
Christian
John Hendy writes:
> I was just completely baffled for about 5-10 straight minutes as to
> why my block was not producing a results section with my generated
> graphics file from an R block.
>
> I kept double checking my header options one by one despite having
> simply copied/pasted/modified it from a previous working block. Turns
> out it appears that #+name has a character limit!
>
> This (on Org-mode version 8.0.2 (release_8.0.2-65-g1e32d7)), doesn't work:
>
> #+name: improvement-treatment
>
> It appears the name can be 20 characters long (the above is 21).
>
> Is this by design or something I accidentally uncovered? Forgive me if
> it's come up before or is documented. I did a couple searches but
> didn't see it.
>
>
> Thanks,
> John
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: Limit on length of babel block #+name: value?
2013-05-16 4:41 Limit on length of babel block #+name: value? John Hendy
2013-05-16 7:02 ` Christian Moe
@ 2013-05-16 12:08 ` Eric Schulte
2013-05-17 21:00 ` John Hendy
1 sibling, 1 reply; 4+ messages in thread
From: Eric Schulte @ 2013-05-16 12:08 UTC (permalink / raw)
To: John Hendy; +Cc: emacs-orgmode
[-- Attachment #1: Type: text/plain, Size: 855 bytes --]
John Hendy <jw.hendy@gmail.com> writes:
> I was just completely baffled for about 5-10 straight minutes as to
> why my block was not producing a results section with my generated
> graphics file from an R block.
>
> I kept double checking my header options one by one despite having
> simply copied/pasted/modified it from a previous working block. Turns
> out it appears that #+name has a character limit!
>
> This (on Org-mode version 8.0.2 (release_8.0.2-65-g1e32d7)), doesn't work:
>
> #+name: improvement-treatment
>
> It appears the name can be 20 characters long (the above is 21).
>
I don't think there is any name length limit. The attached example
works for me, and exports w/o problem to HTML. Maybe I'm not using the
block in the same way as you, but I'm pretty confident there is no name
limit and your problem probably lies elsewhere.
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: long-name.org --]
[-- Type: text/x-org, Size: 871 bytes --]
There is no name length limit
#+name: improvement-treatment
#+begin_src sh
date
#+end_src
#+RESULTS: improvement-treatment
: Thu May 16 06:04:20 MDT 2013
Calling this block.
#+call: improvement-treatment()
#+RESULTS: improvement-treatment()
: Thu May 16 06:04:36 MDT 2013
and even longer
#+name: improvement-treatmenttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttt
#+begin_src sh
date
#+end_src
#+RESULTS: improvement-treatmenttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttt
: Thu May 16 06:05:04 MDT 2013
Calling this longer block.
#+call: improvement-treatmenttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttt()
#+RESULTS: improvement-treatmenttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttt()
: Thu May 16 06:05:24 MDT 2013
[-- Attachment #3: Type: text/plain, Size: 237 bytes --]
Best,
>
> Is this by design or something I accidentally uncovered? Forgive me if
> it's come up before or is documented. I did a couple searches but
> didn't see it.
>
>
> Thanks,
> John
>
--
Eric Schulte
http://cs.unm.edu/~eschulte
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: Limit on length of babel block #+name: value?
2013-05-16 12:08 ` Eric Schulte
@ 2013-05-17 21:00 ` John Hendy
0 siblings, 0 replies; 4+ messages in thread
From: John Hendy @ 2013-05-17 21:00 UTC (permalink / raw)
To: Eric Schulte; +Cc: emacs-orgmode
I can't replicate anymore, though I did just update Org. Perhaps I
should have fiddled with it more before doing that...
If it happens again, I'll dig into it. Thanks for double
checking/attempting to replicate -- must be on my end.
John
On Thu, May 16, 2013 at 7:08 AM, Eric Schulte <schulte.eric@gmail.com> wrote:
> John Hendy <jw.hendy@gmail.com> writes:
>
>> I was just completely baffled for about 5-10 straight minutes as to
>> why my block was not producing a results section with my generated
>> graphics file from an R block.
>>
>> I kept double checking my header options one by one despite having
>> simply copied/pasted/modified it from a previous working block. Turns
>> out it appears that #+name has a character limit!
>>
>> This (on Org-mode version 8.0.2 (release_8.0.2-65-g1e32d7)), doesn't work:
>>
>> #+name: improvement-treatment
>>
>> It appears the name can be 20 characters long (the above is 21).
>>
>
> I don't think there is any name length limit. The attached example
> works for me, and exports w/o problem to HTML. Maybe I'm not using the
> block in the same way as you, but I'm pretty confident there is no name
> limit and your problem probably lies elsewhere.
>
>
>
> Best,
>
>>
>> Is this by design or something I accidentally uncovered? Forgive me if
>> it's come up before or is documented. I did a couple searches but
>> didn't see it.
>>
>>
>> Thanks,
>> John
>>
>
> --
> Eric Schulte
> http://cs.unm.edu/~eschulte
>
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2013-05-17 21:00 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-05-16 4:41 Limit on length of babel block #+name: value? John Hendy
2013-05-16 7:02 ` Christian Moe
2013-05-16 12:08 ` Eric Schulte
2013-05-17 21:00 ` John Hendy
Code repositories for project(s) associated with this public inbox
https://git.savannah.gnu.org/cgit/emacs/org-mode.git
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).