* [gnorb] completion for `gnorb-gnus-incoming-do-todo'
@ 2015-08-12 12:24 Thomas Holst
2015-08-12 13:53 ` Eric Abrahamsen
[not found] ` <8737zosjan.fsf@ericabrahamsen.net>
0 siblings, 2 replies; 9+ messages in thread
From: Thomas Holst @ 2015-08-12 12:24 UTC (permalink / raw)
To: org mode mailing list
Hello,
thanks for the gnorb package! I started using it and I like it a lot!
When I call `gnorb-gnus-incoming-do-todo' from gnus I'm prompted for a
headline. But completion is not working. Neither <TAB> nor M-j does
anything.
How can I get completion working? Completion is working for org-refile.
I have no settings customized. Only key bindings as suggested.
Thank you for looking into this!
--
Regards
Thomas
^ permalink raw reply [flat|nested] 9+ messages in thread* Re: [gnorb] completion for `gnorb-gnus-incoming-do-todo'
2015-08-12 12:24 [gnorb] completion for `gnorb-gnus-incoming-do-todo' Thomas Holst
@ 2015-08-12 13:53 ` Eric Abrahamsen
[not found] ` <8737zosjan.fsf@ericabrahamsen.net>
1 sibling, 0 replies; 9+ messages in thread
From: Eric Abrahamsen @ 2015-08-12 13:53 UTC (permalink / raw)
To: emacs-orgmode
Thomas Holst <Thomas_Holst@gmx.de> writes:
> Hello,
>
> thanks for the gnorb package! I started using it and I like it a lot!
>
> When I call `gnorb-gnus-incoming-do-todo' from gnus I'm prompted for a
> headline. But completion is not working. Neither <TAB> nor M-j does
> anything.
>
> How can I get completion working? Completion is working for org-refile.
>
> I have no settings customized. Only key bindings as suggested.
>
> Thank you for looking into this!
Hi Thomas,
Glad to hear you're liking Gnorb! Can you tell me a few things about
your setup?
1. What versions of the packages are you using? Org and Gnorb?
2. Are you using any special completion packages (ido, iswitchb, helm)?
3. Can you confirm that the prompt where you're seeing failure is
"Trigger heading:"?
I assume that putting point after this sexp and running "C-x C-e" gets
you a fully functional completion prompt, is that true?
(org-refile-get-location "Trigger heading" nil t)
Thanks for your help in tracking this down!
Eric
^ permalink raw reply [flat|nested] 9+ messages in thread[parent not found: <8737zosjan.fsf@ericabrahamsen.net>]
* Re: [gnorb] completion for `gnorb-gnus-incoming-do-todo'
[not found] ` <8737zosjan.fsf@ericabrahamsen.net>
@ 2015-08-12 16:19 ` Thomas Holst
2015-08-15 4:45 ` Eric Abrahamsen
0 siblings, 1 reply; 9+ messages in thread
From: Thomas Holst @ 2015-08-12 16:19 UTC (permalink / raw)
To: org mode mailing list
Hi Eric,
· Eric Abrahamsen <eric@ericabrahamsen.net> wrote:
>> thanks for the gnorb package! I started using it and I like it a lot!
>>
>> When I call `gnorb-gnus-incoming-do-todo' from gnus I'm prompted for a
>> headline. But completion is not working. Neither <TAB> nor M-j does
>> anything.
>>
>> How can I get completion working? Completion is working for org-refile.
>>
>> I have no settings customized. Only key bindings as suggested.
>>
>> Thank you for looking into this!
>
> Hi Thomas,
>
> Glad to hear you're liking Gnorb! Can you tell me a few things about
> your setup?
>
> 1. What versions of the packages are you using? Org and Gnorb?
I use most recent git versions:
Org-mode version 8.3.1 (release_8.3.1-56-g046110 @
/home/thommy/git-emacs/org-mode/lisp/)
gnorb: most recent git version
> 2. Are you using any special completion packages (ido, iswitchb,
> helm)?
I mostly use helm. But for refile I use following settings since I
found helm not really working here:
#+begin_src emacs_lisp
;; -----------------------------------------------------------------------------
;; settings für org-refile
;; -----------------------------------------------------------------------------
(setq org-refile-use-outline-path 'file)
(setq org-refile-targets
'((org-agenda-files :maxlevel . 3)
(org-agenda-text-search-extra-files . (:maxlevel . 3))
(nil :maxlevel . 5)))
; Allow refile to create parent tasks with confirmation
(setq org-refile-allow-creating-parent-nodes (quote confirm))
#+end_src
> 3. Can you confirm that the prompt where you're seeing failure is
> "Trigger heading:"?
I see: "Trigger heading (default Reparaturen):"
>
> I assume that putting point after this sexp and running "C-x C-e" gets
> you a fully functional completion prompt, is that true?
>
> (org-refile-get-location "Trigger heading" nil t)
Yes with helm interface. But again completion is not functional.
Now when I press `g' at the begin of a headline I get:
"Refile subtree "Erträge" to (default Reperaturen):"
With regular (no helm) completion (<TAB> completes) working.
> Thanks for your help in tracking this down!
Again thank you for looking into this! I really apreciate your help and
gnorb package which makes my work a lot easier"
--
Thomas
^ permalink raw reply [flat|nested] 9+ messages in thread* Re: [gnorb] completion for `gnorb-gnus-incoming-do-todo'
2015-08-12 16:19 ` Thomas Holst
@ 2015-08-15 4:45 ` Eric Abrahamsen
2015-08-15 15:31 ` Thomas Holst
0 siblings, 1 reply; 9+ messages in thread
From: Eric Abrahamsen @ 2015-08-15 4:45 UTC (permalink / raw)
To: emacs-orgmode
Thomas Holst <Thomas_Holst@gmx.de> writes:
> Hi Eric,
>
> · Eric Abrahamsen <eric@ericabrahamsen.net> wrote:
>
>>> thanks for the gnorb package! I started using it and I like it a lot!
>>>
>>> When I call `gnorb-gnus-incoming-do-todo' from gnus I'm prompted for a
>>> headline. But completion is not working. Neither <TAB> nor M-j does
>>> anything.
>>>
>>> How can I get completion working? Completion is working for org-refile.
>>>
>>> I have no settings customized. Only key bindings as suggested.
>>>
>>> Thank you for looking into this!
>>
>> Hi Thomas,
>>
>> Glad to hear you're liking Gnorb! Can you tell me a few things about
>> your setup?
>>
>> 1. What versions of the packages are you using? Org and Gnorb?
>
> I use most recent git versions:
>
> Org-mode version 8.3.1 (release_8.3.1-56-g046110 @
> /home/thommy/git-emacs/org-mode/lisp/)
>
> gnorb: most recent git version
>
>> 2. Are you using any special completion packages (ido, iswitchb,
>> helm)?
>
> I mostly use helm. But for refile I use following settings since I
> found helm not really working here:
>
> #+begin_src emacs_lisp
> ;; -----------------------------------------------------------------------------
> ;; settings fr org-refile
> ;; -----------------------------------------------------------------------------
> (setq org-refile-use-outline-path 'file)
> (setq org-refile-targets
> '((org-agenda-files :maxlevel . 3)
> (org-agenda-text-search-extra-files . (:maxlevel . 3))
> (nil :maxlevel . 5)))
>
> ; Allow refile to create parent tasks with confirmation
> (setq org-refile-allow-creating-parent-nodes (quote confirm))
> #+end_src
>
>> 3. Can you confirm that the prompt where you're seeing failure is
>> "Trigger heading:"?
>
> I see: "Trigger heading (default Reparaturen):"
>>
>> I assume that putting point after this sexp and running "C-x C-e" gets
>> you a fully functional completion prompt, is that true?
>>
>> (org-refile-get-location "Trigger heading" nil t)
>
> Yes with helm interface. But again completion is not functional.
>
> Now when I press `g' at the begin of a headline I get:
>
> "Refile subtree "Erträge" to (default Reperaturen):"
>
> With regular (no helm) completion (<TAB> completes) working.
Sorry this is taking me a while...
I'm still trying to get exactly what's going on here -- you haven't been
able to use helm with org at all, so you set those refile values in
order to disable helm when refiling, but with gnorb it tries to go back
to using helm and fails, is that right?
Gnorb provides the option `gnorb-gnus-trigger-refile-targets', which is
basically exactly the same as `org-refile-targets', it just allows you
to adjust how/which headings are proposed as for the gnorb trigger
process. Maybe you can try setting that to the same value as your
current `org-refile-targets', and see if that helps?
Hmm, I should probably be doing that by default...
If I were you, though, I'd be looking more closely into why helm isn't
working with org! It's pretty useful... If you use helm with
`org-refile-get-location', do you not see any headings at all? Or you
see them but typing does nothing?
Eric
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [gnorb] completion for `gnorb-gnus-incoming-do-todo'
2015-08-15 4:45 ` Eric Abrahamsen
@ 2015-08-15 15:31 ` Thomas Holst
2015-08-16 3:53 ` Eric Abrahamsen
0 siblings, 1 reply; 9+ messages in thread
From: Thomas Holst @ 2015-08-15 15:31 UTC (permalink / raw)
To: org mode mailing list; +Cc: Eric Abrahamsen
· Eric Abrahamsen <eric@ericabrahamsen.net> wrote:
> Thomas Holst <Thomas_Holst@gmx.de> writes:
>
>> Hi Eric,
>>
>> · Eric Abrahamsen <eric@ericabrahamsen.net> wrote:
>>
>>>> thanks for the gnorb package! I started using it and I like it a lot!
>>>>
>>>> When I call `gnorb-gnus-incoming-do-todo' from gnus I'm prompted for a
>>>> headline. But completion is not working. Neither <TAB> nor M-j does
>>>> anything.
>>>>
>>>> How can I get completion working? Completion is working for org-refile.
>>>>
>>>> I have no settings customized. Only key bindings as suggested.
>>>>
>>>> Thank you for looking into this!
[ ... snip ... ]
ok so I did a little more intvestigation: The reason why I disabled helm
for `org-refile' and `org-goto' was that completion is not working or at
least not as I wanted. Thats why I set:
#+begin_src emacs_lisp
(add-to-list 'helm-completing-read-handlers-alist '(org-refile . nil))
(add-to-list 'helm-completing-read-handlers-alist '(org-goto . nil))
#+end_src
Forgot to mention that.
Now I added:
#+begin_src emacs_lisp
(add-to-list 'helm-completing-read-handlers-alist '(gnorb-gnus-outgoing-do-todo . nil))
(add-to-list 'helm-completing-read-handlers-alist '(gnorb-gnus-incoming-do-todo . nil))
#+end_src
And I get completion without helm. So this is solved. Sorry for the
noise.
But maybe someone can give me a hint how to get helm working here.
As mentioned above I have
#+begin_src emacs_lisp
(setq org-refile-use-outline-path 'file)
#+end_src
Because I can travel along the path in steps
file <TAB>
1. Heading <TAB>
...
n. heading <RET>
with completion working for each step. With helm enabled for `org-goto'
and `org-refile' I see canditates for completion, but neither <TAB> nor
M-j have any effect. Minibuffer does not change. When I set
`org-refile-use-outline-path' to nil, I get tons of candidates for
completion but <TAB> has also no effect. And if I hit <RETURN> with an
incomplete input I get an error. This behaviour was the reason why I
disabled helm for `org-refile' and `org-goto' to begin with.
So has anyone helm working for `org-refile' and `org-goto'? I would
appreciate any help here. Thanks.
--
Thomas
Life is so easy - that's why it's so complicated
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [gnorb] completion for `gnorb-gnus-incoming-do-todo'
2015-08-15 15:31 ` Thomas Holst
@ 2015-08-16 3:53 ` Eric Abrahamsen
2015-08-16 14:37 ` Thomas Holst
0 siblings, 1 reply; 9+ messages in thread
From: Eric Abrahamsen @ 2015-08-16 3:53 UTC (permalink / raw)
To: emacs-orgmode
Thomas Holst <Thomas_Holst@gmx.de> writes:
> · Eric Abrahamsen <eric@ericabrahamsen.net> wrote:
>> Thomas Holst <Thomas_Holst@gmx.de> writes:
>>
>>> Hi Eric,
>>>
>>> · Eric Abrahamsen <eric@ericabrahamsen.net> wrote:
>>>
>>>>> thanks for the gnorb package! I started using it and I like it a lot!
>>>>>
>>>>> When I call `gnorb-gnus-incoming-do-todo' from gnus I'm prompted for a
>>>>> headline. But completion is not working. Neither <TAB> nor M-j does
>>>>> anything.
>>>>>
>>>>> How can I get completion working? Completion is working for org-refile.
>>>>>
>>>>> I have no settings customized. Only key bindings as suggested.
>>>>>
>>>>> Thank you for looking into this!
>
> [ ... snip ... ]
>
> ok so I did a little more intvestigation: The reason why I disabled helm
> for `org-refile' and `org-goto' was that completion is not working or at
> least not as I wanted. Thats why I set:
>
> #+begin_src emacs_lisp
> (add-to-list 'helm-completing-read-handlers-alist '(org-refile . nil))
> (add-to-list 'helm-completing-read-handlers-alist '(org-goto . nil))
> #+end_src
>
>
> Forgot to mention that.
>
> Now I added:
>
> #+begin_src emacs_lisp
> (add-to-list 'helm-completing-read-handlers-alist '(gnorb-gnus-outgoing-do-todo . nil))
> (add-to-list 'helm-completing-read-handlers-alist '(gnorb-gnus-incoming-do-todo . nil))
> #+end_src
>
>
> And I get completion without helm. So this is solved. Sorry for the
> noise.
No worries, glad it's sorted!
> But maybe someone can give me a hint how to get helm working here.
>
> As mentioned above I have
>
> #+begin_src emacs_lisp
> (setq org-refile-use-outline-path 'file)
> #+end_src
>
> Because I can travel along the path in steps
>
> file <TAB>
> 1. Heading <TAB>
> ...
> n. heading <RET>
>
> with completion working for each step. With helm enabled for `org-goto'
> and `org-refile' I see canditates for completion, but neither <TAB> nor
> M-j have any effect. Minibuffer does not change. When I set
> `org-refile-use-outline-path' to nil, I get tons of candidates for
> completion but <TAB> has also no effect. And if I hit <RETURN> with an
> incomplete input I get an error. This behaviour was the reason why I
> disabled helm for `org-refile' and `org-goto' to begin with.
>
> So has anyone helm working for `org-refile' and `org-goto'? I would
> appreciate any help here. Thanks.
It works fine here! Have you started from "emacs -Q"? That's usually the
best first step.
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [gnorb] completion for `gnorb-gnus-incoming-do-todo'
2015-08-16 3:53 ` Eric Abrahamsen
@ 2015-08-16 14:37 ` Thomas Holst
2015-08-17 7:01 ` Eric Abrahamsen
0 siblings, 1 reply; 9+ messages in thread
From: Thomas Holst @ 2015-08-16 14:37 UTC (permalink / raw)
To: Eric Abrahamsen; +Cc: org mode mailing list
[-- Attachment #1: Type: text/plain, Size: 2120 bytes --]
· Eric Abrahamsen <eric@ericabrahamsen.net> wrote:
>>
>> [ ... snip ... ]
>>
>> [ ... snip completion issue with gnorb ... ]
>
> No worries, glad it's sorted!
>
>> But maybe someone can give me a hint how to get helm working here.
>>
>> As mentioned above I have
>>
>> #+begin_src emacs_lisp
>> (setq org-refile-use-outline-path 'file)
>> #+end_src
>>
>> Because I can travel along the path in steps
>>
>> file <TAB>
>> 1. Heading <TAB>
>> ...
>> n. heading <RET>
>>
>> with completion working for each step. With helm enabled for `org-goto'
>> and `org-refile' I see canditates for completion, but neither <TAB> nor
>> M-j have any effect. Minibuffer does not change. When I set
>> `org-refile-use-outline-path' to nil, I get tons of candidates for
>> completion but <TAB> has also no effect. And if I hit <RETURN> with an
>> incomplete input I get an error. This behaviour was the reason why I
>> disabled helm for `org-refile' and `org-goto' to begin with.
>>
>> So has anyone helm working for `org-refile' and `org-goto'? I would
>> appreciate any help here. Thanks.
>
> It works fine here! Have you started from "emacs -Q"? That's usually the
> best first step.
ok here is what I did to reproduce behavior with ECM
emacs -Q -l "minimal.el"
with minimal.el:
#+begin_src emacs_lisp
;; minimal.el to test org-refile helm
;; most recent org-mode from git
(add-to-list 'load-path "/home/thommy/git-emacs/org-mode/lisp")
(require 'org)
(setq org-use-speed-commands t) ;; `g' on begining of heading calls `(org-refile t)'
(setq org-refile-use-outline-path 'file)
(find-file "/home/thommy/git-emacs/gnorb/gnorb.org") ;; just any org-file works
;; most recent helm from git
(add-to-list 'load-path "~/git-emacs/helm")
(require 'helm-config)
(helm-mode 1)
#+end_src
Now when I hit `g' at begining of a headline I get "gnorb.org" as a
candidate for first step. But no key (<TAB>, C - i, C - z) does
completion. If I hit <RET> with partial or complete input for first step
(e.g. "gn" or "gnorb.org") I get an error:
progn: Wrong type argument: integer-or-marker-p, nil
Backtrace:
[-- Attachment #2: backtrace --]
[-- Type: text/plain, Size: 13682 bytes --]
Debugger entered--Lisp error: (wrong-type-argument integer-or-marker-p nil)
goto-char(nil)
(progn (org-pop-to-buffer-same-window nbuf) (goto-char pos) (org-show-context (quote org-goto)))
(if (and arg (not (equal arg 3))) (progn (org-pop-to-buffer-same-window nbuf) (goto-char pos) (org-show-context (quote org-goto))) (if regionp (progn (org-kill-new (buffer-substring region-start region-end)) (org-save-markers-in-region region-start region-end)) (org-copy-subtree 1 nil t)) (save-current-buffer (set-buffer (setq nbuf (or (find-buffer-visiting file) (find-file-noselect file)))) (setq reversed (org-notes-order-reversed-p)) (save-excursion (save-restriction (widen) (if pos (progn (goto-char pos) (looking-at org-outline-regexp) (setq level (org-get-valid-level ... 1)) (goto-char (if reversed ... ...))) (setq level 1) (if (not reversed) (goto-char (point-max)) (goto-char (point-min)) (or (outline-next-heading) (goto-char ...)))) (if (not (bolp)) (newline)) (org-paste-subtree level nil nil t) (if org-log-refile (progn (org-add-log-setup (quote refile) nil nil (quote findpos) org-log-refile) (if (eq org-log-refile ...) nil (save-excursion ...)))) (and org-auto-align-tags (let ((org-loop-over-headlines-in-active-region nil)) (org-set-tags nil t))) (let ((bookmark-name (plist-get org-bookmark-names-plist :last-refile))) (if bookmark-name (progn (condition-case err ... ...)))) (if (and (boundp (quote org-refile-for-capture)) org-refile-for-capture) (progn (let (...) (if bookmark-name ...)) (move-marker org-capture-last-stored-marker (point)))) (if (fboundp (quote deactivate-mark)) (deactivate-mark)) (run-hooks (quote org-after-refile-insert-hook))))) (if org-refile-keep nil (if regionp (delete-region (point) (+ (point) (- region-end region-start))) (delete-region (and (org-back-to-heading t) (point)) (min (1+ (buffer-size)) (org-end-of-subtree t t) (point))))) (if (featurep (quote org-inlinetask)) (progn (org-inlinetask-remove-END-maybe))) (setq org-markers-to-move nil) (message (concat actionmsg " to \"%s\" in file %s: done") (car it) file))
(progn (setq file (nth 1 it) re (nth 2 it) pos (nth 3 it)) (if (and (not arg) pos (equal (buffer-file-name) file) (if regionp (and (>= pos region-start) (<= pos region-end)) (and (>= pos (point)) (< pos (save-excursion (org-end-of-subtree t t)))))) (error "Cannot refile to position inside the tree or region")) (setq nbuf (or (find-buffer-visiting file) (find-file-noselect file))) (if (and arg (not (equal arg 3))) (progn (org-pop-to-buffer-same-window nbuf) (goto-char pos) (org-show-context (quote org-goto))) (if regionp (progn (org-kill-new (buffer-substring region-start region-end)) (org-save-markers-in-region region-start region-end)) (org-copy-subtree 1 nil t)) (save-current-buffer (set-buffer (setq nbuf (or (find-buffer-visiting file) (find-file-noselect file)))) (setq reversed (org-notes-order-reversed-p)) (save-excursion (save-restriction (widen) (if pos (progn (goto-char pos) (looking-at org-outline-regexp) (setq level ...) (goto-char ...)) (setq level 1) (if (not reversed) (goto-char ...) (goto-char ...) (or ... ...))) (if (not (bolp)) (newline)) (org-paste-subtree level nil nil t) (if org-log-refile (progn (org-add-log-setup ... nil nil ... org-log-refile) (if ... nil ...))) (and org-auto-align-tags (let (...) (org-set-tags nil t))) (let ((bookmark-name ...)) (if bookmark-name (progn ...))) (if (and (boundp ...) org-refile-for-capture) (progn (let ... ...) (move-marker org-capture-last-stored-marker ...))) (if (fboundp (quote deactivate-mark)) (deactivate-mark)) (run-hooks (quote org-after-refile-insert-hook))))) (if org-refile-keep nil (if regionp (delete-region (point) (+ (point) (- region-end region-start))) (delete-region (and (org-back-to-heading t) (point)) (min (1+ (buffer-size)) (org-end-of-subtree t t) (point))))) (if (featurep (quote org-inlinetask)) (progn (org-inlinetask-remove-END-maybe))) (setq org-markers-to-move nil) (message (concat actionmsg " to \"%s\" in file %s: done") (car it) file)))
(if (or (and (equal arg 2) org-clock-hd-marker (marker-buffer org-clock-hd-marker) (prog1 (setq it (list (or org-clock-heading "running clock") (buffer-file-name (marker-buffer org-clock-hd-marker)) "" (marker-position org-clock-hd-marker))) (setq arg nil))) (setq it (or rfloc (let (heading-text) (save-excursion (if (and arg ...) nil (org-back-to-heading t) (setq heading-text ...)) (org-refile-get-location (cond ... ... ...) default-buffer (and ... org-refile-allow-creating-parent-nodes) arg)))))) (progn (setq file (nth 1 it) re (nth 2 it) pos (nth 3 it)) (if (and (not arg) pos (equal (buffer-file-name) file) (if regionp (and (>= pos region-start) (<= pos region-end)) (and (>= pos (point)) (< pos (save-excursion ...))))) (error "Cannot refile to position inside the tree or region")) (setq nbuf (or (find-buffer-visiting file) (find-file-noselect file))) (if (and arg (not (equal arg 3))) (progn (org-pop-to-buffer-same-window nbuf) (goto-char pos) (org-show-context (quote org-goto))) (if regionp (progn (org-kill-new (buffer-substring region-start region-end)) (org-save-markers-in-region region-start region-end)) (org-copy-subtree 1 nil t)) (save-current-buffer (set-buffer (setq nbuf (or (find-buffer-visiting file) (find-file-noselect file)))) (setq reversed (org-notes-order-reversed-p)) (save-excursion (save-restriction (widen) (if pos (progn ... ... ... ...) (setq level 1) (if ... ... ... ...)) (if (not ...) (newline)) (org-paste-subtree level nil nil t) (if org-log-refile (progn ... ...)) (and org-auto-align-tags (let ... ...)) (let (...) (if bookmark-name ...)) (if (and ... org-refile-for-capture) (progn ... ...)) (if (fboundp ...) (deactivate-mark)) (run-hooks (quote org-after-refile-insert-hook))))) (if org-refile-keep nil (if regionp (delete-region (point) (+ (point) (- region-end region-start))) (delete-region (and (org-back-to-heading t) (point)) (min (1+ ...) (org-end-of-subtree t t) (point))))) (if (featurep (quote org-inlinetask)) (progn (org-inlinetask-remove-END-maybe))) (setq org-markers-to-move nil) (message (concat actionmsg " to \"%s\" in file %s: done") (car it) file))))
(if (equal arg (quote (16))) (org-refile-goto-last-stored) (if (or (and (equal arg 2) org-clock-hd-marker (marker-buffer org-clock-hd-marker) (prog1 (setq it (list (or org-clock-heading "running clock") (buffer-file-name ...) "" (marker-position org-clock-hd-marker))) (setq arg nil))) (setq it (or rfloc (let (heading-text) (save-excursion (if ... nil ... ...) (org-refile-get-location ... default-buffer ... arg)))))) (progn (setq file (nth 1 it) re (nth 2 it) pos (nth 3 it)) (if (and (not arg) pos (equal (buffer-file-name) file) (if regionp (and (>= pos region-start) (<= pos region-end)) (and (>= pos ...) (< pos ...)))) (error "Cannot refile to position inside the tree or region")) (setq nbuf (or (find-buffer-visiting file) (find-file-noselect file))) (if (and arg (not (equal arg 3))) (progn (org-pop-to-buffer-same-window nbuf) (goto-char pos) (org-show-context (quote org-goto))) (if regionp (progn (org-kill-new (buffer-substring region-start region-end)) (org-save-markers-in-region region-start region-end)) (org-copy-subtree 1 nil t)) (save-current-buffer (set-buffer (setq nbuf (or ... ...))) (setq reversed (org-notes-order-reversed-p)) (save-excursion (save-restriction (widen) (if pos ... ... ...) (if ... ...) (org-paste-subtree level nil nil t) (if org-log-refile ...) (and org-auto-align-tags ...) (let ... ...) (if ... ...) (if ... ...) (run-hooks ...)))) (if org-refile-keep nil (if regionp (delete-region (point) (+ ... ...)) (delete-region (and ... ...) (min ... ... ...)))) (if (featurep (quote org-inlinetask)) (progn (org-inlinetask-remove-END-maybe))) (setq org-markers-to-move nil) (message (concat actionmsg " to \"%s\" in file %s: done") (car it) file)))))
(let* ((actionmsg (cond (msg msg) ((equal arg 3) "Refile (and keep)") (t "Refile"))) (cbuf (current-buffer)) (regionp (org-region-active-p)) (region-start (and regionp (region-beginning))) (region-end (and regionp (region-end))) (filename (buffer-file-name (buffer-base-buffer cbuf))) (org-refile-keep (if (equal arg 3) t org-refile-keep)) pos it nbuf file re level reversed) (setq last-command nil) (if regionp (progn (goto-char region-start) (or (bolp) (goto-char (point-at-bol))) (setq region-start (point)) (if (or (org-kill-is-subtree-p (buffer-substring region-start region-end)) (prog1 org-refile-active-region-within-subtree (let (...) (org-toggle-heading) (setq region-end ...)))) nil (user-error "The region is not a (sequence of) subtree(s)")))) (if (equal arg (quote (16))) (org-refile-goto-last-stored) (if (or (and (equal arg 2) org-clock-hd-marker (marker-buffer org-clock-hd-marker) (prog1 (setq it (list ... ... "" ...)) (setq arg nil))) (setq it (or rfloc (let (heading-text) (save-excursion ... ...))))) (progn (setq file (nth 1 it) re (nth 2 it) pos (nth 3 it)) (if (and (not arg) pos (equal (buffer-file-name) file) (if regionp (and ... ...) (and ... ...))) (error "Cannot refile to position inside the tree or region")) (setq nbuf (or (find-buffer-visiting file) (find-file-noselect file))) (if (and arg (not (equal arg 3))) (progn (org-pop-to-buffer-same-window nbuf) (goto-char pos) (org-show-context (quote org-goto))) (if regionp (progn (org-kill-new ...) (org-save-markers-in-region region-start region-end)) (org-copy-subtree 1 nil t)) (save-current-buffer (set-buffer (setq nbuf ...)) (setq reversed (org-notes-order-reversed-p)) (save-excursion (save-restriction ... ... ... ... ... ... ... ... ... ...))) (if org-refile-keep nil (if regionp (delete-region ... ...) (delete-region ... ...))) (if (featurep (quote org-inlinetask)) (progn (org-inlinetask-remove-END-maybe))) (setq org-markers-to-move nil) (message (concat actionmsg " to \"%s\" in file %s: done") (car it) file))))))
(if (member arg (quote (0 (64)))) (org-refile-cache-clear) (let* ((actionmsg (cond (msg msg) ((equal arg 3) "Refile (and keep)") (t "Refile"))) (cbuf (current-buffer)) (regionp (org-region-active-p)) (region-start (and regionp (region-beginning))) (region-end (and regionp (region-end))) (filename (buffer-file-name (buffer-base-buffer cbuf))) (org-refile-keep (if (equal arg 3) t org-refile-keep)) pos it nbuf file re level reversed) (setq last-command nil) (if regionp (progn (goto-char region-start) (or (bolp) (goto-char (point-at-bol))) (setq region-start (point)) (if (or (org-kill-is-subtree-p (buffer-substring region-start region-end)) (prog1 org-refile-active-region-within-subtree (let ... ... ...))) nil (user-error "The region is not a (sequence of) subtree(s)")))) (if (equal arg (quote (16))) (org-refile-goto-last-stored) (if (or (and (equal arg 2) org-clock-hd-marker (marker-buffer org-clock-hd-marker) (prog1 (setq it ...) (setq arg nil))) (setq it (or rfloc (let ... ...)))) (progn (setq file (nth 1 it) re (nth 2 it) pos (nth 3 it)) (if (and (not arg) pos (equal ... file) (if regionp ... ...)) (error "Cannot refile to position inside the tree or region")) (setq nbuf (or (find-buffer-visiting file) (find-file-noselect file))) (if (and arg (not ...)) (progn (org-pop-to-buffer-same-window nbuf) (goto-char pos) (org-show-context ...)) (if regionp (progn ... ...) (org-copy-subtree 1 nil t)) (save-current-buffer (set-buffer ...) (setq reversed ...) (save-excursion ...)) (if org-refile-keep nil (if regionp ... ...)) (if (featurep ...) (progn ...)) (setq org-markers-to-move nil) (message (concat actionmsg " to \"%s\" in file %s: done") (car it) file)))))))
org-refile(t)
eval((org-refile t))
(cond ((commandp org-speed-command) (setq this-command org-speed-command) (call-interactively org-speed-command)) ((functionp org-speed-command) (funcall org-speed-command)) ((and org-speed-command (listp org-speed-command)) (eval org-speed-command)) (t (let (org-use-speed-commands) (call-interactively (quote org-self-insert-command)))))
(cond ((and org-use-speed-commands (let ((kv (this-command-keys-vector))) (setq org-speed-command (run-hook-with-args-until-success (quote org-speed-command-hook) (make-string 1 (aref kv ...)))))) (cond ((commandp org-speed-command) (setq this-command org-speed-command) (call-interactively org-speed-command)) ((functionp org-speed-command) (funcall org-speed-command)) ((and org-speed-command (listp org-speed-command)) (eval org-speed-command)) (t (let (org-use-speed-commands) (call-interactively (quote org-self-insert-command)))))) ((and (org-table-p) (progn (and (featurep (quote org-table)) org-table-auto-blank-field (memq last-command (quote (org-cycle org-return org-shifttab org-ctrl-c-ctrl-c))) (if (or (equal ... 32) (looking-at "[^|\n]* |")) (let (org-table-may-need-update) (org-table-blank-field)) (org-table-blank-field))) t) (eq N 1) (looking-at "[^|\n]* |")) (let (org-table-may-need-update) (goto-char (1- (match-end 0))) (backward-delete-char 1) (goto-char (match-beginning 0)) (self-insert-command N))) (t (setq org-table-may-need-update t) (self-insert-command N) (org-fix-tags-on-the-fly) (if org-self-insert-cluster-for-undo (if (not (eq last-command (quote org-self-insert-command))) (setq org-self-insert-command-undo-counter 1) (if (>= org-self-insert-command-undo-counter 20) (setq org-self-insert-command-undo-counter 1) (and (> org-self-insert-command-undo-counter 0) buffer-undo-list (listp buffer-undo-list) (not (cadr buffer-undo-list)) (setcdr buffer-undo-list (cddr buffer-undo-list))) (setq org-self-insert-command-undo-counter (1+ org-self-insert-command-undo-counter)))))))
org-self-insert-command(1)
call-interactively(org-self-insert-command nil nil)
command-execute(org-self-insert-command)
[-- Attachment #3: Type: text/plain, Size: 168 bytes --]
Same happens if I open two org-files and set `org-refile-targets'
accordingly.
Thanks for looking into this - although it has nothing to do with gnorb.
--
Thomas
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [gnorb] completion for `gnorb-gnus-incoming-do-todo'
2015-08-16 14:37 ` Thomas Holst
@ 2015-08-17 7:01 ` Eric Abrahamsen
2015-08-17 8:38 ` Thomas Holst
0 siblings, 1 reply; 9+ messages in thread
From: Eric Abrahamsen @ 2015-08-17 7:01 UTC (permalink / raw)
To: emacs-orgmode
Thomas Holst <Thomas_Holst@gmx.de> writes:
> · Eric Abrahamsen <eric@ericabrahamsen.net> wrote:
>
>>>
>>> [ ... snip ... ]
>>>
>>> [ ... snip completion issue with gnorb ... ]
>>
[...]
> ok here is what I did to reproduce behavior with ECM
All right, now that's a bug report!
I followed your steps, and can confirm the same behavior. Unfortunately,
I don't really understand what's going on, and don't have time to dive
into helm's guts at the moment.
Using these exact same settings, but loading helm from the package
manager instead of the git repo, everything works just fine. Would you
consider shifting to use the packaged version of helm (which I can't
believe lags the git repo by more than a couple of days) instead?
Yours,
Eric
> emacs -Q -l "minimal.el"
>
> with minimal.el:
>
> #+begin_src emacs_lisp
> ;; minimal.el to test org-refile helm
> ;; most recent org-mode from git
> (add-to-list 'load-path "/home/thommy/git-emacs/org-mode/lisp")
>
> (require 'org)
>
> (setq org-use-speed-commands t) ;; `g' on begining of heading calls `(org-refile t)'
> (setq org-refile-use-outline-path 'file)
>
> (find-file "/home/thommy/git-emacs/gnorb/gnorb.org") ;; just any org-file works
>
>
> ;; most recent helm from git
> (add-to-list 'load-path "~/git-emacs/helm")
> (require 'helm-config)
> (helm-mode 1)
> #+end_src
>
> Now when I hit `g' at begining of a headline I get "gnorb.org" as a
> candidate for first step. But no key (<TAB>, C - i, C - z) does
> completion. If I hit <RET> with partial or complete input for first step
> (e.g. "gn" or "gnorb.org") I get an error:
>
> progn: Wrong type argument: integer-or-marker-p, nil
>
> Backtrace:
>
> Debugger entered--Lisp error: (wrong-type-argument integer-or-marker-p nil)
> goto-char(nil)
> (progn (org-pop-to-buffer-same-window nbuf) (goto-char pos) (org-show-context (quote org-goto)))
> (if (and arg (not (equal arg 3))) (progn
> (org-pop-to-buffer-same-window nbuf) (goto-char pos) (org-show-context
> (quote org-goto))) (if regionp (progn (org-kill-new (buffer-substring
> region-start region-end)) (org-save-markers-in-region region-start
> region-end)) (org-copy-subtree 1 nil t)) (save-current-buffer
> (set-buffer (setq nbuf (or (find-buffer-visiting file)
> (find-file-noselect file)))) (setq reversed
> (org-notes-order-reversed-p)) (save-excursion (save-restriction
> (widen) (if pos (progn (goto-char pos) (looking-at org-outline-regexp)
> (setq level (org-get-valid-level ... 1)) (goto-char (if reversed ...
> ...))) (setq level 1) (if (not reversed) (goto-char (point-max))
> (goto-char (point-min)) (or (outline-next-heading) (goto-char ...))))
> (if (not (bolp)) (newline)) (org-paste-subtree level nil nil t) (if
> org-log-refile (progn (org-add-log-setup (quote refile) nil nil (quote
> findpos) org-log-refile) (if (eq org-log-refile ...) nil
> (save-excursion ...)))) (and org-auto-align-tags (let
> ((org-loop-over-headlines-in-active-region nil)) (org-set-tags nil
> t))) (let ((bookmark-name (plist-get org-bookmark-names-plist
> :last-refile))) (if bookmark-name (progn (condition-case err ...
> ...)))) (if (and (boundp (quote org-refile-for-capture))
> org-refile-for-capture) (progn (let (...) (if bookmark-name ...))
> (move-marker org-capture-last-stored-marker (point)))) (if (fboundp
> (quote deactivate-mark)) (deactivate-mark)) (run-hooks (quote
> org-after-refile-insert-hook))))) (if org-refile-keep nil (if regionp
> (delete-region (point) (+ (point) (- region-end region-start)))
> (delete-region (and (org-back-to-heading t) (point)) (min (1+
> (buffer-size)) (org-end-of-subtree t t) (point))))) (if (featurep
> (quote org-inlinetask)) (progn (org-inlinetask-remove-END-maybe)))
> (setq org-markers-to-move nil) (message (concat actionmsg " to \"%s\"
> in file %s: done") (car it) file))
> (progn (setq file (nth 1 it) re (nth 2 it) pos (nth 3 it)) (if (and
> (not arg) pos (equal (buffer-file-name) file) (if regionp (and (>= pos
> region-start) (<= pos region-end)) (and (>= pos (point)) (< pos
> (save-excursion (org-end-of-subtree t t)))))) (error "Cannot refile to
> position inside the tree or region")) (setq nbuf (or
> (find-buffer-visiting file) (find-file-noselect file))) (if (and arg
> (not (equal arg 3))) (progn (org-pop-to-buffer-same-window nbuf)
> (goto-char pos) (org-show-context (quote org-goto))) (if regionp
> (progn (org-kill-new (buffer-substring region-start region-end))
> (org-save-markers-in-region region-start region-end))
> (org-copy-subtree 1 nil t)) (save-current-buffer (set-buffer (setq
> nbuf (or (find-buffer-visiting file) (find-file-noselect file))))
> (setq reversed (org-notes-order-reversed-p)) (save-excursion
> (save-restriction (widen) (if pos (progn (goto-char pos) (looking-at
> org-outline-regexp) (setq level ...) (goto-char ...)) (setq level 1)
> (if (not reversed) (goto-char ...) (goto-char ...) (or ... ...))) (if
> (not (bolp)) (newline)) (org-paste-subtree level nil nil t) (if
> org-log-refile (progn (org-add-log-setup ... nil nil ...
> org-log-refile) (if ... nil ...))) (and org-auto-align-tags (let (...)
> (org-set-tags nil t))) (let ((bookmark-name ...)) (if bookmark-name
> (progn ...))) (if (and (boundp ...) org-refile-for-capture) (progn
> (let ... ...) (move-marker org-capture-last-stored-marker ...))) (if
> (fboundp (quote deactivate-mark)) (deactivate-mark)) (run-hooks (quote
> org-after-refile-insert-hook))))) (if org-refile-keep nil (if regionp
> (delete-region (point) (+ (point) (- region-end region-start)))
> (delete-region (and (org-back-to-heading t) (point)) (min (1+
> (buffer-size)) (org-end-of-subtree t t) (point))))) (if (featurep
> (quote org-inlinetask)) (progn (org-inlinetask-remove-END-maybe)))
> (setq org-markers-to-move nil) (message (concat actionmsg " to \"%s\"
> in file %s: done") (car it) file)))
> (if (or (and (equal arg 2) org-clock-hd-marker (marker-buffer
> org-clock-hd-marker) (prog1 (setq it (list (or org-clock-heading
> "running clock") (buffer-file-name (marker-buffer
> org-clock-hd-marker)) "" (marker-position org-clock-hd-marker))) (setq
> arg nil))) (setq it (or rfloc (let (heading-text) (save-excursion (if
> (and arg ...) nil (org-back-to-heading t) (setq heading-text ...))
> (org-refile-get-location (cond ... ... ...) default-buffer (and ...
> org-refile-allow-creating-parent-nodes) arg)))))) (progn (setq file
> (nth 1 it) re (nth 2 it) pos (nth 3 it)) (if (and (not arg) pos (equal
> (buffer-file-name) file) (if regionp (and (>= pos region-start) (<=
> pos region-end)) (and (>= pos (point)) (< pos (save-excursion ...)))))
> (error "Cannot refile to position inside the tree or region")) (setq
> nbuf (or (find-buffer-visiting file) (find-file-noselect file))) (if
> (and arg (not (equal arg 3))) (progn (org-pop-to-buffer-same-window
> nbuf) (goto-char pos) (org-show-context (quote org-goto))) (if regionp
> (progn (org-kill-new (buffer-substring region-start region-end))
> (org-save-markers-in-region region-start region-end))
> (org-copy-subtree 1 nil t)) (save-current-buffer (set-buffer (setq
> nbuf (or (find-buffer-visiting file) (find-file-noselect file))))
> (setq reversed (org-notes-order-reversed-p)) (save-excursion
> (save-restriction (widen) (if pos (progn ... ... ... ...) (setq level
> 1) (if ... ... ... ...)) (if (not ...) (newline)) (org-paste-subtree
> level nil nil t) (if org-log-refile (progn ... ...)) (and
> org-auto-align-tags (let ... ...)) (let (...) (if bookmark-name ...))
> (if (and ... org-refile-for-capture) (progn ... ...)) (if (fboundp
> ...) (deactivate-mark)) (run-hooks (quote
> org-after-refile-insert-hook))))) (if org-refile-keep nil (if regionp
> (delete-region (point) (+ (point) (- region-end region-start)))
> (delete-region (and (org-back-to-heading t) (point)) (min (1+ ...)
> (org-end-of-subtree t t) (point))))) (if (featurep (quote
> org-inlinetask)) (progn (org-inlinetask-remove-END-maybe))) (setq
> org-markers-to-move nil) (message (concat actionmsg " to \"%s\" in
> file %s: done") (car it) file))))
> (if (equal arg (quote (16))) (org-refile-goto-last-stored) (if (or
> (and (equal arg 2) org-clock-hd-marker (marker-buffer
> org-clock-hd-marker) (prog1 (setq it (list (or org-clock-heading
> "running clock") (buffer-file-name ...) "" (marker-position
> org-clock-hd-marker))) (setq arg nil))) (setq it (or rfloc (let
> (heading-text) (save-excursion (if ... nil ... ...)
> (org-refile-get-location ... default-buffer ... arg)))))) (progn (setq
> file (nth 1 it) re (nth 2 it) pos (nth 3 it)) (if (and (not arg) pos
> (equal (buffer-file-name) file) (if regionp (and (>= pos region-start)
> (<= pos region-end)) (and (>= pos ...) (< pos ...)))) (error "Cannot
> refile to position inside the tree or region")) (setq nbuf (or
> (find-buffer-visiting file) (find-file-noselect file))) (if (and arg
> (not (equal arg 3))) (progn (org-pop-to-buffer-same-window nbuf)
> (goto-char pos) (org-show-context (quote org-goto))) (if regionp
> (progn (org-kill-new (buffer-substring region-start region-end))
> (org-save-markers-in-region region-start region-end))
> (org-copy-subtree 1 nil t)) (save-current-buffer (set-buffer (setq
> nbuf (or ... ...))) (setq reversed (org-notes-order-reversed-p))
> (save-excursion (save-restriction (widen) (if pos ... ... ...) (if ...
> ...) (org-paste-subtree level nil nil t) (if org-log-refile ...) (and
> org-auto-align-tags ...) (let ... ...) (if ... ...) (if ... ...)
> (run-hooks ...)))) (if org-refile-keep nil (if regionp (delete-region
> (point) (+ ... ...)) (delete-region (and ... ...) (min ... ... ...))))
> (if (featurep (quote org-inlinetask)) (progn
> (org-inlinetask-remove-END-maybe))) (setq org-markers-to-move nil)
> (message (concat actionmsg " to \"%s\" in file %s: done") (car it)
> file)))))
> (let* ((actionmsg (cond (msg msg) ((equal arg 3) "Refile (and
> keep)") (t "Refile"))) (cbuf (current-buffer)) (regionp
> (org-region-active-p)) (region-start (and regionp (region-beginning)))
> (region-end (and regionp (region-end))) (filename (buffer-file-name
> (buffer-base-buffer cbuf))) (org-refile-keep (if (equal arg 3) t
> org-refile-keep)) pos it nbuf file re level reversed) (setq
> last-command nil) (if regionp (progn (goto-char region-start) (or
> (bolp) (goto-char (point-at-bol))) (setq region-start (point)) (if (or
> (org-kill-is-subtree-p (buffer-substring region-start region-end))
> (prog1 org-refile-active-region-within-subtree (let (...)
> (org-toggle-heading) (setq region-end ...)))) nil (user-error "The
> region is not a (sequence of) subtree(s)")))) (if (equal arg (quote
> (16))) (org-refile-goto-last-stored) (if (or (and (equal arg 2)
> org-clock-hd-marker (marker-buffer org-clock-hd-marker) (prog1 (setq
> it (list ... ... "" ...)) (setq arg nil))) (setq it (or rfloc (let
> (heading-text) (save-excursion ... ...))))) (progn (setq file (nth 1
> it) re (nth 2 it) pos (nth 3 it)) (if (and (not arg) pos (equal
> (buffer-file-name) file) (if regionp (and ... ...) (and ... ...)))
> (error "Cannot refile to position inside the tree or region")) (setq
> nbuf (or (find-buffer-visiting file) (find-file-noselect file))) (if
> (and arg (not (equal arg 3))) (progn (org-pop-to-buffer-same-window
> nbuf) (goto-char pos) (org-show-context (quote org-goto))) (if regionp
> (progn (org-kill-new ...) (org-save-markers-in-region region-start
> region-end)) (org-copy-subtree 1 nil t)) (save-current-buffer
> (set-buffer (setq nbuf ...)) (setq reversed
> (org-notes-order-reversed-p)) (save-excursion (save-restriction ...
> ... ... ... ... ... ... ... ... ...))) (if org-refile-keep nil (if
> regionp (delete-region ... ...) (delete-region ... ...))) (if
> (featurep (quote org-inlinetask)) (progn
> (org-inlinetask-remove-END-maybe))) (setq org-markers-to-move nil)
> (message (concat actionmsg " to \"%s\" in file %s: done") (car it)
> file))))))
> (if (member arg (quote (0 (64)))) (org-refile-cache-clear) (let*
> ((actionmsg (cond (msg msg) ((equal arg 3) "Refile (and keep)") (t
> "Refile"))) (cbuf (current-buffer)) (regionp (org-region-active-p))
> (region-start (and regionp (region-beginning))) (region-end (and
> regionp (region-end))) (filename (buffer-file-name (buffer-base-buffer
> cbuf))) (org-refile-keep (if (equal arg 3) t org-refile-keep)) pos it
> nbuf file re level reversed) (setq last-command nil) (if regionp
> (progn (goto-char region-start) (or (bolp) (goto-char (point-at-bol)))
> (setq region-start (point)) (if (or (org-kill-is-subtree-p
> (buffer-substring region-start region-end)) (prog1
> org-refile-active-region-within-subtree (let ... ... ...))) nil
> (user-error "The region is not a (sequence of) subtree(s)")))) (if
> (equal arg (quote (16))) (org-refile-goto-last-stored) (if (or (and
> (equal arg 2) org-clock-hd-marker (marker-buffer org-clock-hd-marker)
> (prog1 (setq it ...) (setq arg nil))) (setq it (or rfloc (let ...
> ...)))) (progn (setq file (nth 1 it) re (nth 2 it) pos (nth 3 it)) (if
> (and (not arg) pos (equal ... file) (if regionp ... ...)) (error
> "Cannot refile to position inside the tree or region")) (setq nbuf (or
> (find-buffer-visiting file) (find-file-noselect file))) (if (and arg
> (not ...)) (progn (org-pop-to-buffer-same-window nbuf) (goto-char pos)
> (org-show-context ...)) (if regionp (progn ... ...) (org-copy-subtree
> 1 nil t)) (save-current-buffer (set-buffer ...) (setq reversed ...)
> (save-excursion ...)) (if org-refile-keep nil (if regionp ... ...))
> (if (featurep ...) (progn ...)) (setq org-markers-to-move nil)
> (message (concat actionmsg " to \"%s\" in file %s: done") (car it)
> file)))))))
> org-refile(t)
> eval((org-refile t))
> (cond ((commandp org-speed-command) (setq this-command
> org-speed-command) (call-interactively org-speed-command)) ((functionp
> org-speed-command) (funcall org-speed-command)) ((and
> org-speed-command (listp org-speed-command)) (eval org-speed-command))
> (t (let (org-use-speed-commands) (call-interactively (quote
> org-self-insert-command)))))
> (cond ((and org-use-speed-commands (let ((kv
> (this-command-keys-vector))) (setq org-speed-command
> (run-hook-with-args-until-success (quote org-speed-command-hook)
> (make-string 1 (aref kv ...)))))) (cond ((commandp org-speed-command)
> (setq this-command org-speed-command) (call-interactively
> org-speed-command)) ((functionp org-speed-command) (funcall
> org-speed-command)) ((and org-speed-command (listp org-speed-command))
> (eval org-speed-command)) (t (let (org-use-speed-commands)
> (call-interactively (quote org-self-insert-command)))))) ((and
> (org-table-p) (progn (and (featurep (quote org-table))
> org-table-auto-blank-field (memq last-command (quote (org-cycle
> org-return org-shifttab org-ctrl-c-ctrl-c))) (if (or (equal ... 32)
> (looking-at "[^|\n]* |")) (let (org-table-may-need-update)
> (org-table-blank-field)) (org-table-blank-field))) t) (eq N 1)
> (looking-at "[^|\n]* |")) (let (org-table-may-need-update) (goto-char
> (1- (match-end 0))) (backward-delete-char 1) (goto-char
> (match-beginning 0)) (self-insert-command N))) (t (setq
> org-table-may-need-update t) (self-insert-command N)
> (org-fix-tags-on-the-fly) (if org-self-insert-cluster-for-undo (if
> (not (eq last-command (quote org-self-insert-command))) (setq
> org-self-insert-command-undo-counter 1) (if (>=
> org-self-insert-command-undo-counter 20) (setq
> org-self-insert-command-undo-counter 1) (and (>
> org-self-insert-command-undo-counter 0) buffer-undo-list (listp
> buffer-undo-list) (not (cadr buffer-undo-list)) (setcdr
> buffer-undo-list (cddr buffer-undo-list))) (setq
> org-self-insert-command-undo-counter (1+
> org-self-insert-command-undo-counter)))))))
> org-self-insert-command(1)
> call-interactively(org-self-insert-command nil nil)
> command-execute(org-self-insert-command)
>
>
> Same happens if I open two org-files and set `org-refile-targets'
> accordingly.
>
> Thanks for looking into this - although it has nothing to do with gnorb.
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [gnorb] completion for `gnorb-gnus-incoming-do-todo'
2015-08-17 7:01 ` Eric Abrahamsen
@ 2015-08-17 8:38 ` Thomas Holst
0 siblings, 0 replies; 9+ messages in thread
From: Thomas Holst @ 2015-08-17 8:38 UTC (permalink / raw)
To: Eric Abrahamsen; +Cc: emacs-orgmode
Hi Eric,
· Eric Abrahamsen <eric@ericabrahamsen.net> wrote:
> Thomas Holst <Thomas_Holst@gmx.de> writes:
>
>> · Eric Abrahamsen <eric@ericabrahamsen.net> wrote:
>>
>>>>
>>>> [ ... snip ... ]
>>>>
>>>> [ ... snip completion issue with gnorb ... ]
>>>
>
> [...]
>
>> ok here is what I did to reproduce behavior with ECM
>
> All right, now that's a bug report!
>
> I followed your steps, and can confirm the same behavior. Unfortunately,
> I don't really understand what's going on, and don't have time to dive
> into helm's guts at the moment.
>
> Using these exact same settings, but loading helm from the package
> manager instead of the git repo, everything works just fine. Would you
> consider shifting to use the packaged version of helm (which I can't
> believe lags the git repo by more than a couple of days) instead?
thanks for confirming the buggy behaviour. I will test the packaged helm
version. It will take a few days until I have time to test it. I will
report when I have done my tests.
--
Regards
Thomas
^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2015-08-17 8:44 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-08-12 12:24 [gnorb] completion for `gnorb-gnus-incoming-do-todo' Thomas Holst
2015-08-12 13:53 ` Eric Abrahamsen
[not found] ` <8737zosjan.fsf@ericabrahamsen.net>
2015-08-12 16:19 ` Thomas Holst
2015-08-15 4:45 ` Eric Abrahamsen
2015-08-15 15:31 ` Thomas Holst
2015-08-16 3:53 ` Eric Abrahamsen
2015-08-16 14:37 ` Thomas Holst
2015-08-17 7:01 ` Eric Abrahamsen
2015-08-17 8:38 ` Thomas Holst
Code repositories for project(s) associated with this public inbox
https://git.savannah.gnu.org/cgit/emacs/org-mode.git
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).