emacs-orgmode@gnu.org archives
 help / color / mirror / code / Atom feed
* Creating Gantt charts by Exporting to TaskJuggler 3.3.0
@ 2012-09-14 13:13 Sebastien Vauban
  2012-09-14 13:26 ` Buddy Butterfly
  0 siblings, 1 reply; 15+ messages in thread
From: Sebastien Vauban @ 2012-09-14 13:13 UTC (permalink / raw)
  To: emacs-orgmode-mXXj517/zsQ

Hello,

I'm trying to use the export to TJ3 on Windows (I installed Ruby from Cygwin),
but don't succeed to get the first view of the project, as shown on
http://orgmode.org/worg/org-tutorials/org-taskjuggler.html.

I'm using the very first example given at line "Your resulting Org mode
project file will look somewhat like the following:", add the required tag
:taskjuggler_project: to the node "Accounting Software".

Then, I export it to TJ (C-c C-e j) and run tj3 against it:

$ tj3 org-tj3.tjp

Results:

--8<---------------cut here---------------start------------->8---
TaskJuggler v3.3.0 - A Project Management Software

Copyright (c) 2006, 2007, 2008, 2009, 2010, 2011, 2012
              by Chris Schlaeger <chris-vYTEC60ixJUAvxtiuMwx3w@public.gmane.org>

This program is free software; you can redistribute it and/or modify it under
the terms of version 2 of the GNU General Public License as published by the
Free Software Foundation.

org-tj3.tjp:11: Error: allocations is not a known attribute for this property
 purge allocations
--8<---------------cut here---------------end--------------->8---

I comment the purge "allocation line", and try to run it further...

--8<---------------cut here---------------start------------->8---
TaskJuggler v3.3.0 - A Project Management Software

Copyright (c) 2006, 2007, 2008, 2009, 2010, 2011, 2012
              by Chris Schlaeger <chris-vYTEC60ixJUAvxtiuMwx3w@public.gmane.org>

This program is free software; you can redistribute it and/or modify it under
the terms of version 2 of the GNU General Public License as published by the
Free Software Foundation.

org-tj3.tjp:70: Warning: The keyword 'hierarchindex' has been deprecated! See the reference manual for details.
  columns hierarchindex
org-tj3.tjp:70: Warning: The keyword 'completed' has been deprecated! See the reference manual for details.
  columns hierarchindex, name, start, end, effort, duration, completed
org-tj3.tjp:77: Error: Unexpected token 'utilization' found. Expecting one of 'activetasks', 'annualleave', 'annualleavebalance', 'alert', 'alertmessages', 'alertsummaries', 'alerttrend', 'balance', 'bsi', 'chart', 'closedtasks', 'complete', 'completed', 'criticalness', 'cost', 'daily', 'directreports', 'duration', 'duties', 'efficiency', 'effort', 'effortdone', 'effortleft', 'email', 'end', 'flags', 'followers', 'freetime', 'freework', 'fte', 'gauge', 'headcount', 'hierarchindex', 'hourly', 'id', 'index', 'inputs', 'journal', 'journal_sub', 'journalmessages', 'journalsummaries', 'line', 'managers', 'maxend', 'maxstart', 'minend', 'minstart', 'monthly', 'no', 'name', 'note', 'opentasks', 'pathcriticalness', 'precursors', 'priority', 'quarterly', 'rate', 'reports', 'resources', 'responsible
 ', 'revenue', 'scenario', 'seqno', 'sickleave', 'specialleave', 'start', 'status', 'targets', 'wbs', 'unpaidleave', 'weekly', 'yearly'
  columns no, name, utilization
--8<---------------cut here---------------end--------------->8---

So, it seems that the output file is not up-to-date (tj v3.3.0), or do I miss
something?

Best regards,
  Seb

PS - Org-mode version 7.9.1 (release_7.9.1-199-g6589b9 @ d:/home/sva/src/org-mode/lisp/)

-- 
Sebastien Vauban

^ permalink raw reply	[flat|nested] 15+ messages in thread

* Re: Creating Gantt charts by Exporting to TaskJuggler 3.3.0
  2012-09-14 13:13 Creating Gantt charts by Exporting to TaskJuggler 3.3.0 Sebastien Vauban
@ 2012-09-14 13:26 ` Buddy Butterfly
  2012-09-14 14:38   ` Sebastien Vauban
  0 siblings, 1 reply; 15+ messages in thread
From: Buddy Butterfly @ 2012-09-14 13:26 UTC (permalink / raw)
  To: emacs-orgmode

[-- Attachment #1: Type: text/plain, Size: 9210 bytes --]


Hi,

tj3 support is still buggy. And tj export gets confused with the task_id
tags.
It does not generate unique IDs nor does  it have manual ID marking. So
it gets
scrampled. So, for a bigger project it does not really work.

Verify to use

*Org Export Taskjuggler Target Version:
*
3.0

I have used the following settings with M-x customize-group ->
org-export-taskjuggler
and worked for me as a first shot with tj3:


*Org Export Taskjuggler Default Global Properties:
*
shift s40 "Part time shift" {
  workinghours wed, thu, fri off
}

account cost "Project Cost" {
  aggregate tasks
}

account rev "Payments" {
}

*Org Export Taskjuggler Default Reports:*

# Now the project has been specified completely. Stopping here would
# result in a valid TaskJuggler file that could be processed and
# scheduled. But no reports would be generated to visualize the
# results.

navigator navbar {
  hidereport @none
}

macro TaskTip [
  tooltip istask() -8<-
    '''Start: ''' <-query attribute='start'->
    '''End: ''' <-query attribute='end'->
    ----
    '''Resources:'''

    <-query attribute='resources'->
    ----
    '''Precursors: '''

    <-query attribute='precursors'->
    ----
    '''Followers: '''

    <-query attribute='followers'->
    ->8-
]

textreport frame "" {
  header -8<-
    == mwit Projects ==
    <[navigator id="navbar"]>
  ->8-
  footer "----"
  textreport index "Overview" {
    formats html
    center '<[report id="overview"]>'
  }

  textreport "Status" {
    formats html
    center -8<-
      <[report id="status.dashboard"]>
      ----
      <[report id="status.completed"]>
      ----
      <[report id="status.ongoing"]>
      ----
      <[report id="status.future"]>
    ->8-
  }

  textreport development "Development" {
    formats html
    center '<[report id="development"]>'
  }

  textreport "ContactList" {
    formats html
    title "Contact List"
    center '<[report id="contactList"]>'
  }
  textreport "ResourceGraph" {
    formats html
    title "Resource Graph"
    center '<[report id="resourceGraph"]>'
  }
}

# A traditional Gantt chart with a project overview.
taskreport overview "" {
  header -8<-
    === Project Overview ===

    The project is structured into 3 phases.

    # Specification
    # <-reportlink id='frame.development'->
    # Testing

    === Original Project Plan ===
  ->8-
  columns bsi { title 'WBS' },
          name, start, end, effort, cost,
          revenue, chart { ${TaskTip} }
  # For this report we like to have the abbreviated weekday in front
  # of the date. %a is the tag for this.
  timeformat "%a %Y-%m-%d"
  loadunit days
  hideresource @all
  balance cost rev
  caption 'All effort values are in man days.'

  footer -8<-
    === Staffing ===

    All project phases are properly staffed. See [[ResourceGraph]] for
    detailed resource allocations.

    === Current Status ===

    The project started off with a delay of 4 days. This slightly affected
    the original schedule. See [[Deliveries]] for the impact on the
    delivery dates.
  ->8-
}

# Macro to set the background color of a cell according to the alert
# level of the task.
macro AlertColor [
  cellcolor plan.alert = 0 "#00D000" # green
  cellcolor plan.alert = 1 "#D0D000" # yellow
  cellcolor plan.alert = 2 "#D00000" # red
]

taskreport status "" {
  columns bsi { width 50 title 'WBS' }, name { width 150 },
          start { width 100 }, end { width 100 },
          effort { width 100 },
          alert { tooltip plan.journal
                          != '' "<-query attribute='journal'->" width 150 },
          status { width 150 }

  taskreport dashboard "" {
    headline "Project Dashboard (<-query attribute='now'->)"
    columns name { title "Task" ${AlertColor} width 200},
            resources { width 200 ${AlertColor}
                        listtype bullets
                        listitem "<-query attribute='name'->"
                        start ${projectstart} end ${projectend} },
            alerttrend { title "Trend" ${AlertColor} width 50 },
            journal { width 350 ${AlertColor} }
    journalmode status_up
    journalattributes headline, author, date, summary, details
    hidetask ~hasalert(0)
    sorttasks alert.down
    period %{${now} - 1w} +8w
  }
  taskreport completed "" {
    headline "Already completed tasks"
    hidetask ~(plan.end <= ${now})
  }
  taskreport ongoing "" {
    headline "Ongoing tasks"
    hidetask ~((plan.start <= ${now}) & (plan.end > ${now}))
  }
  taskreport future "" {
    headline "Future tasks"
    hidetask ~(plan.start > ${now})
  }
}

# A list of tasks showing the resources assigned to each task.
taskreport development "" {
  headline "Development - Resource Allocation Report"
  columns bsi { title 'WBS' }, name, start, end, effort { title "Work" },
          duration, chart { ${TaskTip} scale day width 500 }
  timeformat "%Y-%m-%d"
  hideresource ~(isleaf() & isleaf_())
  sortresources name.up
}

# A list of all employees with their contact details.
resourcereport contactList "" {
  headline "Contact list and duty plan"
  columns name,
          email { celltext 1 "[mailto:<-email-> <-email->]" },
          managers { title "Manager" },
          chart { scale day }
  hideresource ~isleaf()
  sortresources name.up
  hidetask @all
}

# A graph showing resource allocation. It identifies whether each
# resource is under- or over-allocated for.
resourcereport resourceGraph "" {
  headline "Resource Allocation Graph"
  columns no, name, effort, rate, weekly { ${TaskTip} }
  loadunit shortauto
  # We only like to show leaf tasks for leaf resources.
  hidetask ~(isleaf() & isleaf_())
  sorttasks plan.start.up
}



Am 14.09.2012 15:13, schrieb Sebastien Vauban:
> Hello,
>
> I'm trying to use the export to TJ3 on Windows (I installed Ruby from Cygwin),
> but don't succeed to get the first view of the project, as shown on
> http://orgmode.org/worg/org-tutorials/org-taskjuggler.html.
>
> I'm using the very first example given at line "Your resulting Org mode
> project file will look somewhat like the following:", add the required tag
> :taskjuggler_project: to the node "Accounting Software".
>
> Then, I export it to TJ (C-c C-e j) and run tj3 against it:
>
> $ tj3 org-tj3.tjp
>
> Results:
>
> --8<---------------cut here---------------start------------->8---
> TaskJuggler v3.3.0 - A Project Management Software
>
> Copyright (c) 2006, 2007, 2008, 2009, 2010, 2011, 2012
>               by Chris Schlaeger <chris@linux.com>
>
> This program is free software; you can redistribute it and/or modify it under
> the terms of version 2 of the GNU General Public License as published by the
> Free Software Foundation.
>
> org-tj3.tjp:11: Error: allocations is not a known attribute for this property
>  purge allocations
> --8<---------------cut here---------------end--------------->8---
>
> I comment the purge "allocation line", and try to run it further...
>
> --8<---------------cut here---------------start------------->8---
> TaskJuggler v3.3.0 - A Project Management Software
>
> Copyright (c) 2006, 2007, 2008, 2009, 2010, 2011, 2012
>               by Chris Schlaeger <chris@linux.com>
>
> This program is free software; you can redistribute it and/or modify it under
> the terms of version 2 of the GNU General Public License as published by the
> Free Software Foundation.
>
> org-tj3.tjp:70: Warning: The keyword 'hierarchindex' has been deprecated! See the reference manual for details.
>   columns hierarchindex
> org-tj3.tjp:70: Warning: The keyword 'completed' has been deprecated! See the reference manual for details.
>   columns hierarchindex, name, start, end, effort, duration, completed
> org-tj3.tjp:77: Error: Unexpected token 'utilization' found. Expecting one of 'activetasks', 'annualleave', 'annualleavebalance', 'alert', 'alertmessages', 'alertsummaries', 'alerttrend', 'balance', 'bsi', 'chart', 'closedtasks', 'complete', 'completed', 'criticalness', 'cost', 'daily', 'directreports', 'duration', 'duties', 'efficiency', 'effort', 'effortdone', 'effortleft', 'email', 'end', 'flags', 'followers', 'freetime', 'freework', 'fte', 'gauge', 'headcount', 'hierarchindex', 'hourly', 'id', 'index', 'inputs', 'journal', 'journal_sub', 'journalmessages', 'journalsummaries', 'line', 'managers', 'maxend', 'maxstart', 'minend', 'minstart', 'monthly', 'no', 'name', 'note', 'opentasks', 'pathcriticalness', 'precursors', 'priority', 'quarterly', 'rate', 'reports', 'resources', 'responsible', 'revenue', 'scenario', 'seqno', 'sickleave', 'specialleave', 'start', 'status', 'targets', 'wbs', 'unpaidleave', 'weekly', 'yearly'
>   columns no, name, utilization
> --8<---------------cut here---------------end--------------->8---
>
> So, it seems that the output file is not up-to-date (tj v3.3.0), or do I miss
> something?
>
> Best regards,
>   Seb
>
> PS - Org-mode version 7.9.1 (release_7.9.1-199-g6589b9 @ d:/home/sva/src/org-mode/lisp/)
>

[-- Attachment #2: Type: text/html, Size: 12169 bytes --]

^ permalink raw reply	[flat|nested] 15+ messages in thread

* Re: Creating Gantt charts by Exporting to TaskJuggler 3.3.0
  2012-09-14 13:26 ` Buddy Butterfly
@ 2012-09-14 14:38   ` Sebastien Vauban
  2012-09-14 15:00     ` Buddy Butterfly
  2012-09-14 15:09     ` Giovanni Ridolfi
  0 siblings, 2 replies; 15+ messages in thread
From: Sebastien Vauban @ 2012-09-14 14:38 UTC (permalink / raw)
  To: emacs-orgmode-mXXj517/zsQ

Hi Buddy,

Buddy Butterfly wrote:
> Am 14.09.2012 15:13, schrieb Sebastien Vauban:
>> I'm trying to use the export to TJ3 on Windows (I installed Ruby from Cygwin),
>> but don't succeed to get the first view of the project, as shown on
>> http://orgmode.org/worg/org-tutorials/org-taskjuggler.html.
>>
>> --8<---------------cut here---------------start------------->8---
>> TaskJuggler v3.3.0 - A Project Management Software
>>
>> Copyright (c) 2006, 2007, 2008, 2009, 2010, 2011, 2012
>>               by Chris Schlaeger <chris-vYTEC60ixJUAvxtiuMwx3w@public.gmane.org>
>>
>> This program is free software; you can redistribute it and/or modify it under
>> the terms of version 2 of the GNU General Public License as published by the
>> Free Software Foundation.
>>
>> org-tj3.tjp:11: Error: allocations is not a known attribute for this property
>>  purge allocations
>> org-tj3.tjp:70: Warning: The keyword 'hierarchindex' has been deprecated! See the reference manual for details.
>>   columns hierarchindex
>> org-tj3.tjp:70: Warning: The keyword 'completed' has been deprecated! See the reference manual for details.
>>   columns hierarchindex, name, start, end, effort, duration, completed
>> org-tj3.tjp:77: Error: Unexpected token 'utilization' found. Expecting one of 'activetasks', 'annualleave', 'annualleavebalance', 'alert', 'alertmessages', 'alertsummaries', 'alerttrend', 'balance', 'bsi', 'chart', 'closedtasks', 'complete', 'completed', 'criticalness', 'cost', 'daily', 'directreports', 'duration', 'duties', 'efficiency', 'effort', 'effortdone', 'effortleft', 'email', 'end', 'flags', 'followers', 'freetime', 'freework', 'fte', 'gauge', 'headcount', 'hierarchindex', 'hourly', 'id', 'index', 'inputs', 'journal', 'journal_sub', 'journalmessages', 'journalsummaries', 'line', 'managers', 'maxend', 'maxstart', 'minend', 'minstart', 'monthly', 'no', 'name', 'note', 'opentasks', 'pathcriticalness', 'precursors', 'priority', 'quarterly', 'rate', 'reports', 'resources', 'responsi
 ble', 'revenue', 'scenario', 'seqno', 'sickleave', 'specialleave', 'start', 'status', 'targets', 'wbs', 'unpaidleave', 'weekly', 'yearly' columns no, name, utilization
>> --8<---------------cut here---------------end--------------->8---
>>
>> So, it seems that the output file is not up-to-date (tj v3.3.0), or do I miss
>> something?
>
> tj3 support is still buggy. And tj export gets confused with the task_id
> tags. It does not generate unique IDs nor does it have manual ID marking. So
> it gets scrampled. So, for a bigger project it does not really work.
>
> Verify to use
>
> *Org Export Taskjuggler Target Version: ...
> *Org Export Taskjuggler Default Global Properties: ...
> *Org Export Taskjuggler Default Reports: ...

I'm going further:

--8<---------------cut here---------------start------------->8---
TaskJuggler v3.3.0 - A Project Management Software

Copyright (c) 2006, 2007, 2008, 2009, 2010, 2011, 2012
              by Chris Schlaeger <chris-vYTEC60ixJUAvxtiuMwx3w@public.gmane.org>

This program is free software; you can redistribute it and/or modify it under
the terms of version 2 of the GNU General Public License as published by the
Free Software Foundation.

Reading file org-tj3.tjp                                     [      Done      ]
Preparing scenario Plan Scenario                             [      Done      ]
Scheduling scenario Plan Scenario                            [      Done      ]
Checking scenario Plan Scenario                              [      Done      ]
org-tj3.tjp:103: Warning: The report frame has no 'balance' defined. No cost or revenue computation will be possible.
org-tj3.tjp:109: Warning: The report frame.index has no 'balance' defined. No cost or revenue computation will be possible.
org-tj3.tjp:114: Warning: The report frame.report3 has no 'balance' defined. No cost or revenue computation will be possible.
org-tj3.tjp:127: Warning: The report frame.development has no 'balance' defined. No cost or revenue computation will be possible.
org-tj3.tjp:132: Warning: The report frame.report5 has no 'balance' defined. No cost or revenue computation will be possible.
org-tj3.tjp:137: Warning: The report frame.report6 has no 'balance' defined. No cost or revenue computation will be possible.
org-tj3.tjp:190: Warning: The report status has no 'balance' defined. No cost or revenue computation will be possible.
org-tj3.tjp:198: Warning: The report status.dashboard has no 'balance' defined. No cost or revenue computation will be possible.
org-tj3.tjp:213: Warning: The report status.completed has no 'balance' defined. No cost or revenue computation will be possible.
org-tj3.tjp:217: Warning: The report status.ongoing has no 'balance' defined. No cost or revenue computation will be possible.
org-tj3.tjp:221: Warning: The report status.future has no 'balance' defined. No cost or revenue computation will be possible.
org-tj3.tjp:228: Warning: The report development has no 'balance' defined. No cost or revenue computation will be possible.
org-tj3.tjp:238: Warning: The report contactList has no 'balance' defined. No cost or revenue computation will be possible.
org-tj3.tjp:251: Warning: The report resourceGraph has no 'balance' defined. No cost or revenue computation will be possible.
Report Overview                                              [      Done      ]
Report Status                                                [      Done      ]
Report Development                                           [      Done      ]
Report ContactList                                           [      Done      ]
Report ResourceGraph                                         [      Done      ]
--8<---------------cut here---------------end--------------->8---

But no GUI or whatever gets launched!?

Best regards,
  Seb

-- 
Sebastien Vauban

^ permalink raw reply	[flat|nested] 15+ messages in thread

* Re: Creating Gantt charts by Exporting to TaskJuggler 3.3.0
  2012-09-14 14:38   ` Sebastien Vauban
@ 2012-09-14 15:00     ` Buddy Butterfly
  2012-09-14 15:09     ` Giovanni Ridolfi
  1 sibling, 0 replies; 15+ messages in thread
From: Buddy Butterfly @ 2012-09-14 15:00 UTC (permalink / raw)
  To: emacs-orgmode


Hi Seb,

ah, true, that is pretty anoying. Also is for me.
There is no GUI anymore for tj3. It is meant to be only exported.
So you should find some html structures being generated.

Best regards,
Matt


Am 14.09.2012 16:38, schrieb Sebastien Vauban:
> Hi Buddy,
>
> Buddy Butterfly wrote:
>> Am 14.09.2012 15:13, schrieb Sebastien Vauban:
>>> I'm trying to use the export to TJ3 on Windows (I installed Ruby from Cygwin),
>>> but don't succeed to get the first view of the project, as shown on
>>> http://orgmode.org/worg/org-tutorials/org-taskjuggler.html.
>>>
>>> --8<---------------cut here---------------start------------->8---
>>> TaskJuggler v3.3.0 - A Project Management Software
>>>
>>> Copyright (c) 2006, 2007, 2008, 2009, 2010, 2011, 2012
>>>               by Chris Schlaeger <chris@linux.com>
>>>
>>> This program is free software; you can redistribute it and/or modify it under
>>> the terms of version 2 of the GNU General Public License as published by the
>>> Free Software Foundation.
>>>
>>> org-tj3.tjp:11: Error: allocations is not a known attribute for this property
>>>  purge allocations
>>> org-tj3.tjp:70: Warning: The keyword 'hierarchindex' has been deprecated! See the reference manual for details.
>>>   columns hierarchindex
>>> org-tj3.tjp:70: Warning: The keyword 'completed' has been deprecated! See the reference manual for details.
>>>   columns hierarchindex, name, start, end, effort, duration, completed
>>> org-tj3.tjp:77: Error: Unexpected token 'utilization' found. Expecting one of 'activetasks', 'annualleave', 'annualleavebalance', 'alert', 'alertmessages', 'alertsummaries', 'alerttrend', 'balance', 'bsi', 'chart', 'closedtasks', 'complete', 'completed', 'criticalness', 'cost', 'daily', 'directreports', 'duration', 'duties', 'efficiency', 'effort', 'effortdone', 'effortleft', 'email', 'end', 'flags', 'followers', 'freetime', 'freework', 'fte', 'gauge', 'headcount', 'hierarchindex', 'hourly', 'id', 'index', 'inputs', 'journal', 'journal_sub', 'journalmessages', 'journalsummaries', 'line', 'managers', 'maxend', 'maxstart', 'minend', 'minstart', 'monthly', 'no', 'name', 'note', 'opentasks', 'pathcriticalness', 'precursors', 'priority', 'quarterly', 'rate', 'reports', 'resources', 'responsible', 'revenue', 'scenario', 'seqno', 'sickleave', 'specialleave', 'start', 'status', 'targets', 'wbs', 'unpaidleave', 'weekly', 'yearly' columns no, name, utilization
>>> --8<---------------cut here---------------end--------------->8---
>>>
>>> So, it seems that the output file is not up-to-date (tj v3.3.0), or do I miss
>>> something?
>> tj3 support is still buggy. And tj export gets confused with the task_id
>> tags. It does not generate unique IDs nor does it have manual ID marking. So
>> it gets scrampled. So, for a bigger project it does not really work.
>>
>> Verify to use
>>
>> *Org Export Taskjuggler Target Version: ...
>> *Org Export Taskjuggler Default Global Properties: ...
>> *Org Export Taskjuggler Default Reports: ...
> I'm going further:
>
> --8<---------------cut here---------------start------------->8---
> TaskJuggler v3.3.0 - A Project Management Software
>
> Copyright (c) 2006, 2007, 2008, 2009, 2010, 2011, 2012
>               by Chris Schlaeger <chris@linux.com>
>
> This program is free software; you can redistribute it and/or modify it under
> the terms of version 2 of the GNU General Public License as published by the
> Free Software Foundation.
>
> Reading file org-tj3.tjp                                     [      Done      ]
> Preparing scenario Plan Scenario                             [      Done      ]
> Scheduling scenario Plan Scenario                            [      Done      ]
> Checking scenario Plan Scenario                              [      Done      ]
> org-tj3.tjp:103: Warning: The report frame has no 'balance' defined. No cost or revenue computation will be possible.
> org-tj3.tjp:109: Warning: The report frame.index has no 'balance' defined. No cost or revenue computation will be possible.
> org-tj3.tjp:114: Warning: The report frame.report3 has no 'balance' defined. No cost or revenue computation will be possible.
> org-tj3.tjp:127: Warning: The report frame.development has no 'balance' defined. No cost or revenue computation will be possible.
> org-tj3.tjp:132: Warning: The report frame.report5 has no 'balance' defined. No cost or revenue computation will be possible.
> org-tj3.tjp:137: Warning: The report frame.report6 has no 'balance' defined. No cost or revenue computation will be possible.
> org-tj3.tjp:190: Warning: The report status has no 'balance' defined. No cost or revenue computation will be possible.
> org-tj3.tjp:198: Warning: The report status.dashboard has no 'balance' defined. No cost or revenue computation will be possible.
> org-tj3.tjp:213: Warning: The report status.completed has no 'balance' defined. No cost or revenue computation will be possible.
> org-tj3.tjp:217: Warning: The report status.ongoing has no 'balance' defined. No cost or revenue computation will be possible.
> org-tj3.tjp:221: Warning: The report status.future has no 'balance' defined. No cost or revenue computation will be possible.
> org-tj3.tjp:228: Warning: The report development has no 'balance' defined. No cost or revenue computation will be possible.
> org-tj3.tjp:238: Warning: The report contactList has no 'balance' defined. No cost or revenue computation will be possible.
> org-tj3.tjp:251: Warning: The report resourceGraph has no 'balance' defined. No cost or revenue computation will be possible.
> Report Overview                                              [      Done      ]
> Report Status                                                [      Done      ]
> Report Development                                           [      Done      ]
> Report ContactList                                           [      Done      ]
> Report ResourceGraph                                         [      Done      ]
> --8<---------------cut here---------------end--------------->8---
>
> But no GUI or whatever gets launched!?
>
> Best regards,
>   Seb
>

^ permalink raw reply	[flat|nested] 15+ messages in thread

* Re: Creating Gantt charts by Exporting to TaskJuggler 3.3.0
  2012-09-14 14:38   ` Sebastien Vauban
  2012-09-14 15:00     ` Buddy Butterfly
@ 2012-09-14 15:09     ` Giovanni Ridolfi
  2012-09-14 15:13       ` Buddy Butterfly
  1 sibling, 1 reply; 15+ messages in thread
From: Giovanni Ridolfi @ 2012-09-14 15:09 UTC (permalink / raw)
  To: Sebastien Vauban, emacs-orgmode@gnu.org
  Cc: Yann Hodique, buddy.butterfly@web.de

Hi, Seb,


> Buddy Butterfly wrote:
> Am 14.09.2012 15:13, schrieb Sebastien Vauban:
>> I'm trying to use the export to TJ3 on Windows (I installed Ruby from Cygwin),
>> but don't succeed to get the first view of the project, as shown on
>> http://orgmode.org/worg/org-tutorials/org-taskjuggler.html.


almost one month ago Yann Hodique proposed 10 patches for the taskjuggler exporter,
please see:


http://article.gmane.org/gmane.emacs.orgmode/58851

Bastien has a branch with these patches, but he'll apply them
when he will have received the FSF papers signed.
I hope soon :-)

But I'm pretty sure you can apply them to your file.

cheers,

Giovanni


^ permalink raw reply	[flat|nested] 15+ messages in thread

* Re: Creating Gantt charts by Exporting to TaskJuggler 3.3.0
  2012-09-14 15:09     ` Giovanni Ridolfi
@ 2012-09-14 15:13       ` Buddy Butterfly
  2012-09-14 15:55         ` Yann Hodique
  2012-09-25 12:33         ` Christian Egli
  0 siblings, 2 replies; 15+ messages in thread
From: Buddy Butterfly @ 2012-09-14 15:13 UTC (permalink / raw)
  To: emacs-orgmode


Hi Giovanni,

thanks for info. I will give this a try when I'll find the time.
At the moment, because of the scrambled handling of task_ids it
is not really usable. Let's see what he fixed in it.

Best regards,
Matt

Am 14.09.2012 17:09, schrieb Giovanni Ridolfi:
> Hi, Seb,
>
>
>> Buddy Butterfly wrote:
>> Am 14.09.2012 15:13, schrieb Sebastien Vauban:
>>> I'm trying to use the export to TJ3 on Windows (I installed Ruby from Cygwin),
>>> but don't succeed to get the first view of the project, as shown on
>>> http://orgmode.org/worg/org-tutorials/org-taskjuggler.html.
>
> almost one month ago Yann Hodique proposed 10 patches for the taskjuggler exporter,
> please see:
>
>
> http://article.gmane.org/gmane.emacs.orgmode/58851
>
> Bastien has a branch with these patches, but he'll apply them
> when he will have received the FSF papers signed.
> I hope soon :-)
>
> But I'm pretty sure you can apply them to your file.
>
> cheers,
>
> Giovanni
>

^ permalink raw reply	[flat|nested] 15+ messages in thread

* Re: Creating Gantt charts by Exporting to TaskJuggler 3.3.0
  2012-09-14 15:13       ` Buddy Butterfly
@ 2012-09-14 15:55         ` Yann Hodique
  2012-09-14 16:06           ` Buddy Butterfly
                             ` (2 more replies)
  2012-09-25 12:33         ` Christian Egli
  1 sibling, 3 replies; 15+ messages in thread
From: Yann Hodique @ 2012-09-14 15:55 UTC (permalink / raw)
  To: buddy.butterfly; +Cc: emacs-orgmode

>>>>> "Buddy" == Buddy Butterfly <buddy.butterfly@web.de> writes:

>> Am 14.09.2012 17:09, schrieb:
>>> Hi, Seb,
>>> almost one month ago Yann Hodique proposed 10 patches for the taskjuggler exporter,
>>> please see:
>>> 
>>> 
>>> http://article.gmane.org/gmane.emacs.orgmode/58851
>>> 
>>> Bastien has a branch with these patches, but he'll apply them
>>> when he will have received the FSF papers signed.
>>> I hope soon :-)
>>> 
>>> But I'm pretty sure you can apply them to your file.
>>> 
>>> cheers,
>> 
>> Giovanni
>> 

> Hi Giovanni,

> thanks for info. I will give this a try when I'll find the time.
> At the moment, because of the scrambled handling of task_ids it
> is not really usable. Let's see what he fixed in it.

Hi,

actually, those patches have been merged in master already (now that the
paperwork is in order :))

That said, I don't think it'll fix anything regarding task_id handling.
I started using TJ with versions 3.x, so I'm not sure what problem
you're talking about exactly.

At the moment I'm kinda contemplating doing a major rewrite of the TJ
exporter to use the org-export framework, which would make it easier to
introduce things like task references through org links, and so on. If
I can fix a thing or two in the process, I'd be happy to. So, if you
have specific limitations in mind, feel free to elaborate.

Cheers,

Yann.

-- 
All technology is suspect, and must be considered potentially dangerous.

  -- BUTLERIAN JIHAD, Handbook for Our Grandchildren

^ permalink raw reply	[flat|nested] 15+ messages in thread

* Re: Creating Gantt charts by Exporting to TaskJuggler 3.3.0
  2012-09-14 15:55         ` Yann Hodique
@ 2012-09-14 16:06           ` Buddy Butterfly
  2013-03-31 16:06             ` Buddy Butterfly
  2012-09-18  6:50           ` Bastien
  2012-09-25 12:36           ` Christian Egli
  2 siblings, 1 reply; 15+ messages in thread
From: Buddy Butterfly @ 2012-09-14 16:06 UTC (permalink / raw)
  To: Yann Hodique; +Cc: emacs-orgmode


Hi Yann,

thanks a lot for your effort.
This really sound very interesting. And I am willed to report
further issues to you. I will try to nail them down more precisely.

The biggest change I would do is to make the properties more generic.
Something like prefixing all properties with a special prefix (configurable)
like "tj_" and just pass them all over to tj. This would allow the user
to use all properties that are, were and will be available for tj
versions and
not having the exporter document.... we support this and that property
in this and
that version of tj....

Best regards,
Matt

Am 14.09.2012 17:55, schrieb Yann Hodique:
>>>>>> "Buddy" == Buddy Butterfly <buddy.butterfly@web.de> writes:
>>> Am 14.09.2012 17:09, schrieb:
>>>> Hi, Seb,
>>>> almost one month ago Yann Hodique proposed 10 patches for the taskjuggler exporter,
>>>> please see:
>>>>
>>>>
>>>> http://article.gmane.org/gmane.emacs.orgmode/58851
>>>>
>>>> Bastien has a branch with these patches, but he'll apply them
>>>> when he will have received the FSF papers signed.
>>>> I hope soon :-)
>>>>
>>>> But I'm pretty sure you can apply them to your file.
>>>>
>>>> cheers,
>>> Giovanni
>>>
>> Hi Giovanni,
>> thanks for info. I will give this a try when I'll find the time.
>> At the moment, because of the scrambled handling of task_ids it
>> is not really usable. Let's see what he fixed in it.
> Hi,
>
> actually, those patches have been merged in master already (now that the
> paperwork is in order :))
>
> That said, I don't think it'll fix anything regarding task_id handling.
> I started using TJ with versions 3.x, so I'm not sure what problem
> you're talking about exactly.
>
> At the moment I'm kinda contemplating doing a major rewrite of the TJ
> exporter to use the org-export framework, which would make it easier to
> introduce things like task references through org links, and so on. If
> I can fix a thing or two in the process, I'd be happy to. So, if you
> have specific limitations in mind, feel free to elaborate.
>
> Cheers,
>
> Yann.
>

^ permalink raw reply	[flat|nested] 15+ messages in thread

* Re: Creating Gantt charts by Exporting to TaskJuggler 3.3.0
  2012-09-14 15:55         ` Yann Hodique
  2012-09-14 16:06           ` Buddy Butterfly
@ 2012-09-18  6:50           ` Bastien
  2012-09-18 14:33             ` John Hendy
  2012-09-25 12:36           ` Christian Egli
  2 siblings, 1 reply; 15+ messages in thread
From: Bastien @ 2012-09-18  6:50 UTC (permalink / raw)
  To: Yann Hodique; +Cc: emacs-orgmode, buddy.butterfly

Hi Yann,

Yann Hodique <yann.hodique@gmail.com> writes:

> At the moment I'm kinda contemplating doing a major rewrite of the TJ
> exporter to use the org-export framework, which would make it easier to
> introduce things like task references through org links, and so on. 

That'd be great!

> If I can fix a thing or two in the process, I'd be happy to. So, if
> you have specific limitations in mind, feel free to elaborate.

You'll surely fix more than one or two things in the process :)

-- 
 Bastien

^ permalink raw reply	[flat|nested] 15+ messages in thread

* Re: Creating Gantt charts by Exporting to TaskJuggler 3.3.0
  2012-09-18  6:50           ` Bastien
@ 2012-09-18 14:33             ` John Hendy
  0 siblings, 0 replies; 15+ messages in thread
From: John Hendy @ 2012-09-18 14:33 UTC (permalink / raw)
  To: Bastien; +Cc: emacs-orgmode, Yann Hodique, buddy.butterfly

On Tue, Sep 18, 2012 at 1:50 AM, Bastien <bzg@altern.org> wrote:
> Hi Yann,
>
> Yann Hodique <yann.hodique@gmail.com> writes:
>
>> At the moment I'm kinda contemplating doing a major rewrite of the TJ
>> exporter to use the org-export framework, which would make it easier to
>> introduce things like task references through org links, and so on.

You might want to take a look at this thread on the TJ mailing list:
- https://groups.google.com/forum/?fromgroups=#!topic/taskjuggler-users/je_XP1VfYXA

And the matching git repo with a TJ -> pgfgantt -> pdf converter:
- https://github.com/ravl1084/TJ2PDF

It's quite nice. I just used it myself. I think it has some bugs, but
they are pretty easily fixable. Anyway, perhaps take a look and try it
out to see if you think it could add any value to what you're trying
to accomplish. I think I'll continue using it, as the result is quite
pleasing.


Thanks for your work on this!
John

>
> That'd be great!
>
>> If I can fix a thing or two in the process, I'd be happy to. So, if
>> you have specific limitations in mind, feel free to elaborate.
>
> You'll surely fix more than one or two things in the process :)
>
> --
>  Bastien
>

^ permalink raw reply	[flat|nested] 15+ messages in thread

* Re: Creating Gantt charts by Exporting to TaskJuggler 3.3.0
  2012-09-14 15:13       ` Buddy Butterfly
  2012-09-14 15:55         ` Yann Hodique
@ 2012-09-25 12:33         ` Christian Egli
  1 sibling, 0 replies; 15+ messages in thread
From: Christian Egli @ 2012-09-25 12:33 UTC (permalink / raw)
  To: emacs-orgmode

Buddy Butterfly <buddy.butterfly@web.de> writes:

> thanks for info. I will give this a try when I'll find the time.
> At the moment, because of the scrambled handling of task_ids it
> is not really usable.

What exactly is the problem with the handling of task_ids?

Thanks
Christian

-- 
Christian Egli
Swiss Library for the Blind, Visually Impaired and Print Disabled
Grubenstrasse 12, CH-8045 Zürich, Switzerland

^ permalink raw reply	[flat|nested] 15+ messages in thread

* Re: Creating Gantt charts by Exporting to TaskJuggler 3.3.0
  2012-09-14 15:55         ` Yann Hodique
  2012-09-14 16:06           ` Buddy Butterfly
  2012-09-18  6:50           ` Bastien
@ 2012-09-25 12:36           ` Christian Egli
  2 siblings, 0 replies; 15+ messages in thread
From: Christian Egli @ 2012-09-25 12:36 UTC (permalink / raw)
  To: emacs-orgmode

Yann Hodique <yann.hodique@gmail.com> writes:

> At the moment I'm kinda contemplating doing a major rewrite of the TJ
> exporter to use the org-export framework

That might be a good idea. The currect tj exporter doesn't use any of
the exporting framework. OTOH it is not really a classic exporter in the
sense that it exports the content. Instead it uses the headlines as
nodes and exports those using some conventions. If this can be handled
with the new exporter then sure go for it.

Thanks
Christian
-- 
Christian Egli
Swiss Library for the Blind, Visually Impaired and Print Disabled
Grubenstrasse 12, CH-8045 Zürich, Switzerland

^ permalink raw reply	[flat|nested] 15+ messages in thread

* Re: Creating Gantt charts by Exporting to TaskJuggler 3.3.0
  2012-09-14 16:06           ` Buddy Butterfly
@ 2013-03-31 16:06             ` Buddy Butterfly
  2013-04-02 15:46               ` Christian Egli
  0 siblings, 1 reply; 15+ messages in thread
From: Buddy Butterfly @ 2013-03-31 16:06 UTC (permalink / raw)
  To: emacs-orgmode

Hi Guys,

long time ago, but I tried again to go into taskjuggling with
org-mode.

I still feel the lack of the support for all tj properties a
major drawback.

@Christian: Did you work on something like the prefix proposal below?
This would be real cool as we could then just use any property we would
like.

Thanks and best regards,
Matt


Am 14.09.2012 18:06, schrieb Buddy Butterfly:
> Hi Yann,
>
> thanks a lot for your effort.
> This really sound very interesting. And I am willed to report
> further issues to you. I will try to nail them down more precisely.
>
> The biggest change I would do is to make the properties more generic.
> Something like prefixing all properties with a special prefix (configurable)
> like "tj_" and just pass them all over to tj. This would allow the user
> to use all properties that are, were and will be available for tj
> versions and
> not having the exporter document.... we support this and that property
> in this and
> that version of tj....
>
> Best regards,
> Matt
>
> Am 14.09.2012 17:55, schrieb Yann Hodique:
>>>>>>> "Buddy" == Buddy Butterfly <buddy.butterfly@web.de> writes:
>>>> Am 14.09.2012 17:09, schrieb:
>>>>> Hi, Seb,
>>>>> almost one month ago Yann Hodique proposed 10 patches for the taskjuggler exporter,
>>>>> please see:
>>>>>
>>>>>
>>>>> http://article.gmane.org/gmane.emacs.orgmode/58851
>>>>>
>>>>> Bastien has a branch with these patches, but he'll apply them
>>>>> when he will have received the FSF papers signed.
>>>>> I hope soon :-)
>>>>>
>>>>> But I'm pretty sure you can apply them to your file.
>>>>>
>>>>> cheers,
>>>> Giovanni
>>>>
>>> Hi Giovanni,
>>> thanks for info. I will give this a try when I'll find the time.
>>> At the moment, because of the scrambled handling of task_ids it
>>> is not really usable. Let's see what he fixed in it.
>> Hi,
>>
>> actually, those patches have been merged in master already (now that the
>> paperwork is in order :))
>>
>> That said, I don't think it'll fix anything regarding task_id handling.
>> I started using TJ with versions 3.x, so I'm not sure what problem
>> you're talking about exactly.
>>
>> At the moment I'm kinda contemplating doing a major rewrite of the TJ
>> exporter to use the org-export framework, which would make it easier to
>> introduce things like task references through org links, and so on. If
>> I can fix a thing or two in the process, I'd be happy to. So, if you
>> have specific limitations in mind, feel free to elaborate.
>>
>> Cheers,
>>
>> Yann.
>>

^ permalink raw reply	[flat|nested] 15+ messages in thread

* Re: Creating Gantt charts by Exporting to TaskJuggler 3.3.0
  2013-03-31 16:06             ` Buddy Butterfly
@ 2013-04-02 15:46               ` Christian Egli
  2013-04-02 16:51                 ` John Hendy
  0 siblings, 1 reply; 15+ messages in thread
From: Christian Egli @ 2013-04-02 15:46 UTC (permalink / raw)
  To: emacs-orgmode

Buddy Butterfly <buddy.butterfly@web.de> writes:

> I still feel the lack of the support for all tj properties a
> major drawback.
>
> @Christian: Did you work on something like the prefix proposal below?
> This would be real cool as we could then just use any property we would
> like.

As far as I know Yann's patches improved this situation, but as far as I
know most of the tj properties are supported anyway. Can you specify
which properties are missing? It should be easy to add them in many
cases.

Thanks
Christian

-- 
Christian Egli
Swiss Library for the Blind, Visually Impaired and Print Disabled
Grubenstrasse 12, CH-8045 Zürich, Switzerland

^ permalink raw reply	[flat|nested] 15+ messages in thread

* Re: Creating Gantt charts by Exporting to TaskJuggler 3.3.0
  2013-04-02 15:46               ` Christian Egli
@ 2013-04-02 16:51                 ` John Hendy
  0 siblings, 0 replies; 15+ messages in thread
From: John Hendy @ 2013-04-02 16:51 UTC (permalink / raw)
  To: Christian Egli; +Cc: emacs-orgmode

On Tue, Apr 2, 2013 at 10:46 AM, Christian Egli <christian.egli@sbs.ch> wrote:
> Buddy Butterfly <buddy.butterfly@web.de> writes:
>
>> I still feel the lack of the support for all tj properties a
>> major drawback.
>>
>> @Christian: Did you work on something like the prefix proposal below?
>> This would be real cool as we could then just use any property we would
>> like.
>
> As far as I know Yann's patches improved this situation, but as far as I
> know most of the tj properties are supported anyway. Can you specify
> which properties are missing? It should be easy to add them in many
> cases.

I meant to follow up on this general idea per your comment in another
thread. I would have responded over there, but this is fresher and
seems like a better fit for a response. Nevertheless, I'll link to it
for a bread crumb trail.
- http://www.mail-archive.com/emacs-orgmode@gnu.org/msg68957.html

This was the bit I specifically wanted to comment on:

#+begin_quote Buddy Butterfly
 Also, you will likely only implement subsets of tj
 properties.

 For example, there are properties missing like

   :workinghours:
#+end_quote

Have you looked at ox-taskjuggler.el? Here are the properties
available (check in org-taskjuggler-valid-resource-attributes):

#+begin_src ox-taskjuggler.el

(defcustom org-taskjuggler-valid-task-attributes
  '(account start note duration endbuffer endcredit end
   flags journalentry length limits maxend maxstart minend
   minstart period reference responsible scheduling
   startbuffer startcredit statusnote chargeset charge)
  "Valid attributes for Taskjuggler tasks.
If one of these appears as a property for a headline, it will be
exported with the corresponding task."
  :group 'org-export-taskjuggler)

(defcustom org-taskjuggler-valid-resource-attributes
  '(limits vacation shift booking efficiency journalentry rate
  workinghours flags)
  "Valid attributes for Taskjuggler resources.
If one of these appears as a property for a headline, it will be
exported with the corresponding resource."
  :group 'org-export-taskjuggler)

(defcustom org-taskjuggler-valid-report-attributes
  '(headline columns definitions timeformat hideresource hidetask
    loadunit sorttasks formats period)
  "Valid attributes for Taskjuggler reports.
If one of these appears as a property for a headline, it will be
exported with the corresponding report."
  :group 'org-export-taskjuggler)

#+end_src

Also note that this is customizable. Anything matching those criteria
just gets passed through (:drawer: value -> task_id "name" { drawer
value }).


Best regards,
John



>
> Thanks
> Christian
>
> --
> Christian Egli
> Swiss Library for the Blind, Visually Impaired and Print Disabled
> Grubenstrasse 12, CH-8045 Zürich, Switzerland
>
>

^ permalink raw reply	[flat|nested] 15+ messages in thread

end of thread, other threads:[~2013-04-02 16:51 UTC | newest]

Thread overview: 15+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-09-14 13:13 Creating Gantt charts by Exporting to TaskJuggler 3.3.0 Sebastien Vauban
2012-09-14 13:26 ` Buddy Butterfly
2012-09-14 14:38   ` Sebastien Vauban
2012-09-14 15:00     ` Buddy Butterfly
2012-09-14 15:09     ` Giovanni Ridolfi
2012-09-14 15:13       ` Buddy Butterfly
2012-09-14 15:55         ` Yann Hodique
2012-09-14 16:06           ` Buddy Butterfly
2013-03-31 16:06             ` Buddy Butterfly
2013-04-02 15:46               ` Christian Egli
2013-04-02 16:51                 ` John Hendy
2012-09-18  6:50           ` Bastien
2012-09-18 14:33             ` John Hendy
2012-09-25 12:36           ` Christian Egli
2012-09-25 12:33         ` Christian Egli

Code repositories for project(s) associated with this public inbox

	https://git.savannah.gnu.org/cgit/emacs/org-mode.git

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).