* Org-publish - too many index.org files
@ 2008-10-30 15:04 Matthew Lundin
2008-10-30 15:15 ` Richard Riley
` (3 more replies)
0 siblings, 4 replies; 12+ messages in thread
From: Matthew Lundin @ 2008-10-30 15:04 UTC (permalink / raw)
To: emacs-orgmode
I am setting up my website with multiple subdirectories, each, of
course, with its own index.org (index.html) file.
A problem arises when I invoke org-publish (or org-agenda). All of the
org files in the project are loaded into buffers resulting in too many
index.org files in my buffer list.
1) Is there any way to have org-publish close buffers after publishing
the files?
2) Alternatively, is there an easy way to rename the buffers to the
title of the page designated with #+TITLE so that they can be told
apart in the buffer list.
----
Finally, on a related question. Does someone know an easy way to have
all the org-files of subdirectories of a website added to the agenda
files recursively?
For my agenda files I currently use:
(setq org-agenda-files (file-expand-wildcards "~/org/*org"))
That, however, only works for a single directory, not recursively.
Thanks!
Matt Lundin
^ permalink raw reply [flat|nested] 12+ messages in thread* Re: Org-publish - too many index.org files 2008-10-30 15:04 Org-publish - too many index.org files Matthew Lundin @ 2008-10-30 15:15 ` Richard Riley 2008-11-01 13:17 ` Carsten Dominik 2008-10-30 15:46 ` R: " Giovanni Ridolfi ` (2 subsequent siblings) 3 siblings, 1 reply; 12+ messages in thread From: Richard Riley @ 2008-10-30 15:15 UTC (permalink / raw) To: emacs-orgmode Matthew Lundin <mdl@imapmail.org> writes: > A problem arises when I invoke org-publish (or org-agenda). All of the > org files in the project are loaded into buffers resulting in too many > index.org files in my buffer list. > > 1) Is there any way to have org-publish close buffers after publishing > the files? I remember asking something similar - but am unsure of the status. Ideally publish would open a file to publish in a way which does not actually create a physical buffer and so does not create the overhead of things like mode processing, font lock etc. But my poor knowledge of emacs is probably showing there :-; ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: Re: Org-publish - too many index.org files 2008-10-30 15:15 ` Richard Riley @ 2008-11-01 13:17 ` Carsten Dominik 0 siblings, 0 replies; 12+ messages in thread From: Carsten Dominik @ 2008-11-01 13:17 UTC (permalink / raw) To: Richard Riley; +Cc: emacs-orgmode On Oct 30, 2008, at 4:15 PM, Richard Riley wrote: > > Matthew Lundin <mdl@imapmail.org> writes: > >> A problem arises when I invoke org-publish (or org-agenda). All of >> the >> org files in the project are loaded into buffers resulting in too >> many >> index.org files in my buffer list. >> >> 1) Is there any way to have org-publish close buffers after >> publishing >> the files? > > I remember asking something similar - but am unsure of the > status. Ideally publish would open a file to publish in a way which > does > not actually create a physical buffer and so does not create the > overhead of things like mode processing, font lock etc. But my poor > knowledge of emacs is probably showing there :-; Hi Richard, these requests which you had were implemented quite some time ago. For example, all the html buffers are killed, and nxhtml-mode is no longer turned on in these buffers. - Carsten ^ permalink raw reply [flat|nested] 12+ messages in thread
* R: Org-publish - too many index.org files 2008-10-30 15:04 Org-publish - too many index.org files Matthew Lundin 2008-10-30 15:15 ` Richard Riley @ 2008-10-30 15:46 ` Giovanni Ridolfi 2008-10-31 4:34 ` Matthew Lundin 2008-11-01 2:29 ` Ethan Blanton 2008-11-01 13:15 ` Carsten Dominik 3 siblings, 1 reply; 12+ messages in thread From: Giovanni Ridolfi @ 2008-10-30 15:46 UTC (permalink / raw) To: emacs-orgmode --- Gio 30/10/08, Matthew Lundin <mdl@imapmail.org> ha scritto: > Da: Matthew Lundin <mdl@imapmail.org> > Oggetto: [Orgmode] Org-publish - too many index.org files > A: emacs-orgmode@gnu.org > Data: Giovedì 30 ottobre 2008, 15:04 > 1) Is there any way to have org-publish close buffers after > publishing > the files? (setq org-publish-after-export-hook t) ? Cheers, Giovanni Unisciti alla community di Io fotografo e video, il nuovo corso di fotografia di Gazzetta dello sport: http://www.flickr.com/groups/iofotografoevideo ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: R: Org-publish - too many index.org files 2008-10-30 15:46 ` R: " Giovanni Ridolfi @ 2008-10-31 4:34 ` Matthew Lundin 0 siblings, 0 replies; 12+ messages in thread From: Matthew Lundin @ 2008-10-31 4:34 UTC (permalink / raw) To: giovanni.ridolfi; +Cc: emacs-orgmode Hi Giovanni, Giovanni Ridolfi <giovanni.ridolfi@yahoo.it> writes: > > (setq org-publish-after-export-hook t) ? Might I ask what functions you use in the hook? Thanks, Matt ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: Org-publish - too many index.org files 2008-10-30 15:04 Org-publish - too many index.org files Matthew Lundin 2008-10-30 15:15 ` Richard Riley 2008-10-30 15:46 ` R: " Giovanni Ridolfi @ 2008-11-01 2:29 ` Ethan Blanton 2008-11-01 3:25 ` Matthew Lundin 2008-11-01 13:15 ` Carsten Dominik 3 siblings, 1 reply; 12+ messages in thread From: Ethan Blanton @ 2008-11-01 2:29 UTC (permalink / raw) To: emacs-orgmode [-- Attachment #1.1: Type: text/plain, Size: 1248 bytes --] Matthew Lundin spake unto us the following wisdom: > A problem arises when I invoke org-publish (or org-agenda). All of the > org files in the project are loaded into buffers resulting in too many > index.org files in my buffer list. [snip] > 2) Alternatively, is there an easy way to rename the buffers to the > title of the page designated with #+TITLE so that they can be told > apart in the buffer list. While this isn't exactly what you asked, I find the following useful in my emacs config: (require 'uniquify) (setq uniquify-buffer-name-style 'post-forward) (setq uniquify-min-dir-content 0) (setq uniquify-after-kill-buffer-p t) With this, if you have: web/index.org web/images/index.org web/articles/index.org ... then when the buffers are all loaded, you will have buffer names like: index.org|web index.org|images index.org|articles I find this much more useful than index.org<1>, <2>, etc., and you might find that it makes those buffers more manageable. Ethan -- The laws that forbid the carrying of arms are laws [that have no remedy for evils]. They disarm only those who are neither inclined nor determined to commit crimes. -- Cesare Beccaria, "On Crimes and Punishments", 1764 [-- Attachment #1.2: Digital signature --] [-- Type: application/pgp-signature, Size: 189 bytes --] [-- Attachment #2: Type: text/plain, Size: 204 bytes --] _______________________________________________ Emacs-orgmode mailing list Remember: use `Reply All' to send replies to the list. Emacs-orgmode@gnu.org http://lists.gnu.org/mailman/listinfo/emacs-orgmode ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: Org-publish - too many index.org files 2008-11-01 2:29 ` Ethan Blanton @ 2008-11-01 3:25 ` Matthew Lundin 0 siblings, 0 replies; 12+ messages in thread From: Matthew Lundin @ 2008-11-01 3:25 UTC (permalink / raw) To: emacs-orgmode Ethan Blanton <elb@psg.com> writes: > Matthew Lundin spake unto us the following wisdom: >> A problem arises when I invoke org-publish (or org-agenda). All of the >> org files in the project are loaded into buffers resulting in too many >> index.org files in my buffer list. [snip] > While this isn't exactly what you asked, I find the following useful > in my emacs config: > > (require 'uniquify) > (setq uniquify-buffer-name-style 'post-forward) > (setq uniquify-min-dir-content 0) > (setq uniquify-after-kill-buffer-p t) > > With this, if you have: > > web/index.org > web/images/index.org > web/articles/index.org > > ... then when the buffers are all loaded, you will have buffer names > like: > > index.org|web > index.org|images > index.org|articles That's perfect! Thanks. -Matt ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: Org-publish - too many index.org files 2008-10-30 15:04 Org-publish - too many index.org files Matthew Lundin ` (2 preceding siblings ...) 2008-11-01 2:29 ` Ethan Blanton @ 2008-11-01 13:15 ` Carsten Dominik 2008-11-02 12:50 ` Matthew Lundin 3 siblings, 1 reply; 12+ messages in thread From: Carsten Dominik @ 2008-11-01 13:15 UTC (permalink / raw) To: Matthew Lundin; +Cc: emacs-orgmode Hi Matthew, what org version are you using? Because I believe that in the current version, those buffers will be killed, if they have been visited to get published. Only buffers which are already present then starting the publishing will not be killed. At least this is how it should work. - Carsten On Oct 30, 2008, at 4:04 PM, Matthew Lundin wrote: > > I am setting up my website with multiple subdirectories, each, of > course, with its own index.org (index.html) file. > > A problem arises when I invoke org-publish (or org-agenda). All of the > org files in the project are loaded into buffers resulting in too many > index.org files in my buffer list. > > 1) Is there any way to have org-publish close buffers after publishing > the files? > > 2) Alternatively, is there an easy way to rename the buffers to the > title of the page designated with #+TITLE so that they can be told > apart in the buffer list. > > ---- > > Finally, on a related question. Does someone know an easy way to have > all the org-files of subdirectories of a website added to the agenda > files recursively? > > For my agenda files I currently use: > > (setq org-agenda-files (file-expand-wildcards "~/org/*org")) > > That, however, only works for a single directory, not recursively. > > Thanks! > > Matt Lundin > > > _______________________________________________ > Emacs-orgmode mailing list > Remember: use `Reply All' to send replies to the list. > Emacs-orgmode@gnu.org > http://lists.gnu.org/mailman/listinfo/emacs-orgmode ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: Org-publish - too many index.org files 2008-11-01 13:15 ` Carsten Dominik @ 2008-11-02 12:50 ` Matthew Lundin 2008-11-02 14:25 ` Carsten Dominik 0 siblings, 1 reply; 12+ messages in thread From: Matthew Lundin @ 2008-11-02 12:50 UTC (permalink / raw) To: Carsten Dominik; +Cc: emacs-orgmode Hi Carsten, Carsten Dominik <dominik@science.uva.nl> writes: > Hi Matthew, > > what org version are you using? > > Because I believe that in the current version, those buffers will be > killed, if they have been visited to get published. Only buffers > which are already present then starting the publishing will not be > killed. > > At least this is how it should work. I am using Org-mode 6.10c. I just did a test. I started up emacs with no file buffers loaded. I then ran M-x org-publish RET project-name. After the project was published, my buffer menu contained all the org files in the project. Here is my org-publish-project-alist configuration: (setq org-publish-project-alist '( ("org-notes" :base-directory "~/mystuff/website/" :base-extension "org" :publishing-directory "[ssh to my site here]" :section-numbers nil :email "[my email address here]" :publishing-function org-publish-org-to-html :recursive t :auto-index t :style "<link rel=\"stylesheet\" type=\"text/css\" href=\"css/myorg.css\" />" :preamble "<div id=\"menu\"> <ul> <li> <a href=\"index.html\">Home</a> </li> <li> <a href=\"sitemap.html\">Site Map</a> </li> <li> <a id=\"ie\" href=\"#\">Top of Page</a> </li> </ul> </div>" :index-filename "pagelist.org" :index-title "Page List" :link-validation-function org-publish-validate-link ) ("org-static" :base-directory "~/mystuff/website/" :publishing-directory "[ssh to my site here]" :recursive t :base-extension "css\\|js\\|png\\|jpg\\|gif\\|pdf\\|mp3\\|ogg\\|swf" :publishing-function org-publish-attachment ) ("org" :components ("org-notes" "org-static")) )) My apologies in advance if I goofed something up in the configuration. Thanks, Matt > On Oct 30, 2008, at 4:04 PM, Matthew Lundin wrote: > >> >> I am setting up my website with multiple subdirectories, each, of >> course, with its own index.org (index.html) file. >> >> A problem arises when I invoke org-publish (or org-agenda). All of the >> org files in the project are loaded into buffers resulting in too many >> index.org files in my buffer list. >> >> 1) Is there any way to have org-publish close buffers after publishing >> the files? >> >> 2) Alternatively, is there an easy way to rename the buffers to the >> title of the page designated with #+TITLE so that they can be told >> apart in the buffer list. >> >> ---- >> >> Finally, on a related question. Does someone know an easy way to have >> all the org-files of subdirectories of a website added to the agenda >> files recursively? >> >> For my agenda files I currently use: >> >> (setq org-agenda-files (file-expand-wildcards "~/org/*org")) >> >> That, however, only works for a single directory, not recursively. >> >> Thanks! >> >> Matt Lundin >> >> >> _______________________________________________ >> Emacs-orgmode mailing list >> Remember: use `Reply All' to send replies to the list. >> Emacs-orgmode@gnu.org >> http://lists.gnu.org/mailman/listinfo/emacs-orgmode ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: Org-publish - too many index.org files 2008-11-02 12:50 ` Matthew Lundin @ 2008-11-02 14:25 ` Carsten Dominik 2008-11-02 15:54 ` Matthew Lundin 0 siblings, 1 reply; 12+ messages in thread From: Carsten Dominik @ 2008-11-02 14:25 UTC (permalink / raw) To: Matthew Lundin; +Cc: emacs-orgmode Hi Matthew, if you turn off the auto-index, do the buffers then disappear? Thanks for checking this out. - Carsten On Nov 2, 2008, at 1:50 PM, Matthew Lundin wrote: > > Hi Carsten, > > Carsten Dominik <dominik@science.uva.nl> writes: > >> Hi Matthew, >> >> what org version are you using? >> >> Because I believe that in the current version, those buffers will be >> killed, if they have been visited to get published. Only buffers >> which are already present then starting the publishing will not be >> killed. >> >> At least this is how it should work. > > I am using Org-mode 6.10c. I just did a test. I started up emacs with > no file buffers loaded. I then ran M-x org-publish RET project-name. > After the project was published, my buffer menu contained all the org > files in the project. > > Here is my org-publish-project-alist configuration: > > (setq org-publish-project-alist > '( > ("org-notes" > :base-directory "~/mystuff/website/" > :base-extension "org" > :publishing-directory "[ssh to my site here]" > :section-numbers nil > :email "[my email address here]" > :publishing-function org-publish-org-to-html > :recursive t > :auto-index t > :style "<link rel=\"stylesheet\" type=\"text/css\" href=\"css/ > myorg.css\" />" > :preamble "<div id=\"menu\"> > <ul> > <li> <a href=\"index.html\">Home</a> </li> > <li> <a href=\"sitemap.html\">Site Map</a> </li> > <li> <a id=\"ie\" href=\"#\">Top of Page</a> </li> > </ul> > </div>" > :index-filename "pagelist.org" > :index-title "Page List" > :link-validation-function org-publish-validate-link > ) > ("org-static" > :base-directory "~/mystuff/website/" > :publishing-directory "[ssh to my site here]" > :recursive t > :base-extension "css\\|js\\|png\\|jpg\\|gif\\|pdf\\|mp3\\|ogg\\|swf" > :publishing-function org-publish-attachment > ) > ("org" > :components > ("org-notes" "org-static")) > )) > > My apologies in advance if I goofed something up in the configuration. > > Thanks, > Matt > > >> On Oct 30, 2008, at 4:04 PM, Matthew Lundin wrote: >> >>> >>> I am setting up my website with multiple subdirectories, each, of >>> course, with its own index.org (index.html) file. >>> >>> A problem arises when I invoke org-publish (or org-agenda). All of >>> the >>> org files in the project are loaded into buffers resulting in too >>> many >>> index.org files in my buffer list. >>> >>> 1) Is there any way to have org-publish close buffers after >>> publishing >>> the files? >>> >>> 2) Alternatively, is there an easy way to rename the buffers to the >>> title of the page designated with #+TITLE so that they can be told >>> apart in the buffer list. >>> >>> ---- >>> >>> Finally, on a related question. Does someone know an easy way to >>> have >>> all the org-files of subdirectories of a website added to the agenda >>> files recursively? >>> >>> For my agenda files I currently use: >>> >>> (setq org-agenda-files (file-expand-wildcards "~/org/*org")) >>> >>> That, however, only works for a single directory, not recursively. >>> >>> Thanks! >>> >>> Matt Lundin >>> >>> >>> _______________________________________________ >>> Emacs-orgmode mailing list >>> Remember: use `Reply All' to send replies to the list. >>> Emacs-orgmode@gnu.org >>> http://lists.gnu.org/mailman/listinfo/emacs-orgmode ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: Org-publish - too many index.org files 2008-11-02 14:25 ` Carsten Dominik @ 2008-11-02 15:54 ` Matthew Lundin 2008-11-02 16:15 ` Carsten Dominik 0 siblings, 1 reply; 12+ messages in thread From: Matthew Lundin @ 2008-11-02 15:54 UTC (permalink / raw) To: Carsten Dominik; +Cc: emacs-orgmode Hi Carsten, Yes, I can confirm that turning off auto index resulted in the buffers being closed after publishing. Thanks, Matt Carsten Dominik <dominik@science.uva.nl> writes: > Hi Matthew, > > if you turn off the auto-index, do the buffers then disappear? > > Thanks for checking this out. > > - Carsten > > On Nov 2, 2008, at 1:50 PM, Matthew Lundin wrote: > >> >> Hi Carsten, >> >> Carsten Dominik <dominik@science.uva.nl> writes: >> >>> Hi Matthew, >>> >>> what org version are you using? >>> >>> Because I believe that in the current version, those buffers will be >>> killed, if they have been visited to get published. Only buffers >>> which are already present then starting the publishing will not be >>> killed. >>> >>> At least this is how it should work. >> >> I am using Org-mode 6.10c. I just did a test. I started up emacs with >> no file buffers loaded. I then ran M-x org-publish RET project-name. >> After the project was published, my buffer menu contained all the org >> files in the project. >> >> Here is my org-publish-project-alist configuration: >> >> (setq org-publish-project-alist >> '( >> ("org-notes" >> :base-directory "~/mystuff/website/" >> :base-extension "org" >> :publishing-directory "[ssh to my site here]" >> :section-numbers nil >> :email "[my email address here]" >> :publishing-function org-publish-org-to-html >> :recursive t >> :auto-index t >> :style "<link rel=\"stylesheet\" type=\"text/css\" >> href=\"css/ myorg.css\" />" >> :preamble "<div id=\"menu\"> >> <ul> >> <li> <a href=\"index.html\">Home</a> </li> >> <li> <a href=\"sitemap.html\">Site Map</a> </li> >> <li> <a id=\"ie\" href=\"#\">Top of Page</a> </li> >> </ul> >> </div>" >> :index-filename "pagelist.org" >> :index-title "Page List" >> :link-validation-function org-publish-validate-link >> ) >> ("org-static" >> :base-directory "~/mystuff/website/" >> :publishing-directory "[ssh to my site here]" >> :recursive t >> :base-extension "css\\|js\\|png\\|jpg\\|gif\\|pdf\\|mp3\\|ogg\\|swf" >> :publishing-function org-publish-attachment >> ) >> ("org" >> :components >> ("org-notes" "org-static")) >> )) >> >> My apologies in advance if I goofed something up in the configuration. >> >> Thanks, >> Matt >> >> >>> On Oct 30, 2008, at 4:04 PM, Matthew Lundin wrote: >>> >>>> >>>> I am setting up my website with multiple subdirectories, each, of >>>> course, with its own index.org (index.html) file. >>>> >>>> A problem arises when I invoke org-publish (or org-agenda). All of >>>> the >>>> org files in the project are loaded into buffers resulting in too >>>> many >>>> index.org files in my buffer list. >>>> >>>> 1) Is there any way to have org-publish close buffers after >>>> publishing >>>> the files? >>>> >>>> 2) Alternatively, is there an easy way to rename the buffers to the >>>> title of the page designated with #+TITLE so that they can be told >>>> apart in the buffer list. >>>> >>>> ---- >>>> >>>> Finally, on a related question. Does someone know an easy way to >>>> have >>>> all the org-files of subdirectories of a website added to the agenda >>>> files recursively? >>>> >>>> For my agenda files I currently use: >>>> >>>> (setq org-agenda-files (file-expand-wildcards "~/org/*org")) >>>> >>>> That, however, only works for a single directory, not recursively. >>>> >>>> Thanks! >>>> >>>> Matt Lundin >>>> >>>> >>>> _______________________________________________ >>>> Emacs-orgmode mailing list >>>> Remember: use `Reply All' to send replies to the list. >>>> Emacs-orgmode@gnu.org >>>> http://lists.gnu.org/mailman/listinfo/emacs-orgmode ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: Org-publish - too many index.org files 2008-11-02 15:54 ` Matthew Lundin @ 2008-11-02 16:15 ` Carsten Dominik 0 siblings, 0 replies; 12+ messages in thread From: Carsten Dominik @ 2008-11-02 16:15 UTC (permalink / raw) To: Matthew Lundin; +Cc: emacs-orgmode Hi Matthew, I hope this is fixed now. Let me know what you find. Best wishes. - Carsten On Nov 2, 2008, at 4:54 PM, Matthew Lundin wrote: > > Hi Carsten, > > Yes, I can confirm that turning off auto index resulted in the buffers > being closed after publishing. > > Thanks, > Matt > > > Carsten Dominik <dominik@science.uva.nl> writes: > >> Hi Matthew, >> >> if you turn off the auto-index, do the buffers then disappear? >> >> Thanks for checking this out. >> >> - Carsten >> >> On Nov 2, 2008, at 1:50 PM, Matthew Lundin wrote: >> >>> >>> Hi Carsten, >>> >>> Carsten Dominik <dominik@science.uva.nl> writes: >>> >>>> Hi Matthew, >>>> >>>> what org version are you using? >>>> >>>> Because I believe that in the current version, those buffers will >>>> be >>>> killed, if they have been visited to get published. Only buffers >>>> which are already present then starting the publishing will not be >>>> killed. >>>> >>>> At least this is how it should work. >>> >>> I am using Org-mode 6.10c. I just did a test. I started up emacs >>> with >>> no file buffers loaded. I then ran M-x org-publish RET project-name. >>> After the project was published, my buffer menu contained all the >>> org >>> files in the project. >>> >>> Here is my org-publish-project-alist configuration: >>> >>> (setq org-publish-project-alist >>> '( >>> ("org-notes" >>> :base-directory "~/mystuff/website/" >>> :base-extension "org" >>> :publishing-directory "[ssh to my site here]" >>> :section-numbers nil >>> :email "[my email address here]" >>> :publishing-function org-publish-org-to-html >>> :recursive t >>> :auto-index t >>> :style "<link rel=\"stylesheet\" type=\"text/css\" >>> href=\"css/ myorg.css\" />" >>> :preamble "<div id=\"menu\"> >>> <ul> >>> <li> <a href=\"index.html\">Home</a> </li> >>> <li> <a href=\"sitemap.html\">Site Map</a> </li> >>> <li> <a id=\"ie\" href=\"#\">Top of Page</a> </li> >>> </ul> >>> </div>" >>> :index-filename "pagelist.org" >>> :index-title "Page List" >>> :link-validation-function org-publish-validate-link >>> ) >>> ("org-static" >>> :base-directory "~/mystuff/website/" >>> :publishing-directory "[ssh to my site here]" >>> :recursive t >>> :base-extension "css\\|js\\|png\\|jpg\\|gif\\|pdf\\|mp3\\|ogg\\| >>> swf" >>> :publishing-function org-publish-attachment >>> ) >>> ("org" >>> :components >>> ("org-notes" "org-static")) >>> )) >>> >>> My apologies in advance if I goofed something up in the >>> configuration. >>> >>> Thanks, >>> Matt >>> >>> >>>> On Oct 30, 2008, at 4:04 PM, Matthew Lundin wrote: >>>> >>>>> >>>>> I am setting up my website with multiple subdirectories, each, of >>>>> course, with its own index.org (index.html) file. >>>>> >>>>> A problem arises when I invoke org-publish (or org-agenda). All of >>>>> the >>>>> org files in the project are loaded into buffers resulting in too >>>>> many >>>>> index.org files in my buffer list. >>>>> >>>>> 1) Is there any way to have org-publish close buffers after >>>>> publishing >>>>> the files? >>>>> >>>>> 2) Alternatively, is there an easy way to rename the buffers to >>>>> the >>>>> title of the page designated with #+TITLE so that they can be told >>>>> apart in the buffer list. >>>>> >>>>> ---- >>>>> >>>>> Finally, on a related question. Does someone know an easy way to >>>>> have >>>>> all the org-files of subdirectories of a website added to the >>>>> agenda >>>>> files recursively? >>>>> >>>>> For my agenda files I currently use: >>>>> >>>>> (setq org-agenda-files (file-expand-wildcards "~/org/*org")) >>>>> >>>>> That, however, only works for a single directory, not recursively. >>>>> >>>>> Thanks! >>>>> >>>>> Matt Lundin >>>>> >>>>> >>>>> _______________________________________________ >>>>> Emacs-orgmode mailing list >>>>> Remember: use `Reply All' to send replies to the list. >>>>> Emacs-orgmode@gnu.org >>>>> http://lists.gnu.org/mailman/listinfo/emacs-orgmode ^ permalink raw reply [flat|nested] 12+ messages in thread
end of thread, other threads:[~2008-11-02 16:16 UTC | newest] Thread overview: 12+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2008-10-30 15:04 Org-publish - too many index.org files Matthew Lundin 2008-10-30 15:15 ` Richard Riley 2008-11-01 13:17 ` Carsten Dominik 2008-10-30 15:46 ` R: " Giovanni Ridolfi 2008-10-31 4:34 ` Matthew Lundin 2008-11-01 2:29 ` Ethan Blanton 2008-11-01 3:25 ` Matthew Lundin 2008-11-01 13:15 ` Carsten Dominik 2008-11-02 12:50 ` Matthew Lundin 2008-11-02 14:25 ` Carsten Dominik 2008-11-02 15:54 ` Matthew Lundin 2008-11-02 16:15 ` Carsten Dominik
Code repositories for project(s) associated with this public inbox https://git.savannah.gnu.org/cgit/emacs/org-mode.git This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).