automatic tangle

automatic tangle

[András Major]

Hi fellows,

I've just discovered that I'm missing a feature in org-mode.  These
days I write much of my code in an Org buffer and tangle it into a set
of source files.  Currently, I follow a rather cumbersome procedure
when making changes to the code:

1. I change the Org file using the C-cC-c keystroke within the code
   block I want to edit.

2. After editing, I press C-cc-c again to return to the main buffer.

3. I save the buffer.

4. I tangle the buffer using C-cC-vt.

5. For further editing, I press C-cC-c again.

I know that 3. is optional, but this still leaves me with four steps
instead of (ideally) just one.

What I would like to have is a way of reducing all this to just one
key command.  Would it make sense to introduce such a command that
simply tangles the entire buffer, including the changes made in the
language-specific buffer, but leaving that buffer open for editing?
If it's a reasonably small change, could anyone introduce it?  (I
don't have time to delve into the depths of org-mode.)

Cheers,

  András

Re: automatic tangle

[Sebastien Vauban]

Hi András,

András Major wrote:
> I've just discovered that I'm missing a feature in org-mode.  These
> days I write much of my code in an Org buffer and tangle it into a set
> of source files.  Currently, I follow a rather cumbersome procedure
> when making changes to the code:
>
> 1. I change the Org file using the C-cC-c keystroke within the code
>    block I want to edit.
>
> 2. After editing, I press C-cc-c again to return to the main buffer.
>
> 3. I save the buffer.
>
> 4. I tangle the buffer using C-cC-vt.
>
> 5. For further editing, I press C-cC-c again.
>
> I know that 3. is optional, but this still leaves me with four steps
> instead of (ideally) just one.
>
> What I would like to have is a way of reducing all this to just one
> key command.  Would it make sense to introduce such a command that
> simply tangles the entire buffer, including the changes made in the
> language-specific buffer, but leaving that buffer open for editing?
> If it's a reasonably small change, could anyone introduce it?  (I
> don't have time to delve into the depths of org-mode.)

I have the impression it's already there: if you edit your code directly in
the Org buffer, without opening an indirect buffer, the only thing you have to
do is:

1. save (optional, as you say)
2. tangle via C-c C-v (C-)t.

You can even advice the tangle function to do the save for you...

Another option is the opposite: edit in your tangled file, and untangle when
you feel it's the right time.

Best regards,
  Seb

-- 
Sebastien Vauban

Re: automatic tangle

[András Major]

Hi Sebastien,

> I have the impression it's already there: if you edit your code directly in
> the Org buffer, without opening an indirect buffer, the only thing you have to
> do is:

That's precisely what I want to avoid.  I'd like to use the
language-specific indentation and highlighting using the indirect
buffer.  Basically, what I'm after is a quick keyboard command that
tangles the entire file while I'm in the indirect buffer.

> Another option is the opposite: edit in your tangled file, and untangle when
> you feel it's the right time.

I don't think that's practical, since each file can be built up from
several code blocks.  In any case, it would be too easy to lose code
that way by accidentally tangling while there are changes in the
source code file.

  András

Re: automatic tangle

[Sebastien Vauban]

Hi András,

András Major wrote:
>> I have the impression it's already there: if you edit your code directly in
>> the Org buffer, without opening an indirect buffer, the only thing you have to
>> do is:
>
> That's precisely what I want to avoid.  I'd like to use the
> language-specific indentation and highlighting using the indirect
> buffer.  Basically, what I'm after is a quick keyboard command that
> tangles the entire file while I'm in the indirect buffer.

I do have:
- language-specific indentation and
- highlighting
in the Org buffer itself...

Just put this in your .emacs file:

#+begin_src emacs-lisp
        ;; fontify code in code blocks
        (setq org-src-fontify-natively t)

        ;; preserve spaces and `tab' characters in source code blocks
        (setq org-src-preserve-indentation t)

        ;; same effect for `tab' as in the language major mode buffer
        (setq org-src-tab-acts-natively t)
#+end_src

>> Another option is the opposite: edit in your tangled file, and untangle when
>> you feel it's the right time.
>
> I don't think that's practical, since each file can be built up from
> several code blocks.

That's not a problem: if you turn on the "comments", you'll see every chunked
delimited in the tangled buffer.

> In any case, it would be too easy to lose code that way by accidentally
> tangling while there are changes in the source code file.

If you play within both files, yes, that's a real potential danger.

Best regards,
  Seb

-- 
Sebastien Vauban

Re: automatic tangle

[Eric S Fraga]

[-- Attachment #1: Type: text/plain, Size: 1708 bytes --]

András Major <andras.g.major@gmail.com> writes:

> Hi fellows,
>
> I've just discovered that I'm missing a feature in org-mode.  These
> days I write much of my code in an Org buffer and tangle it into a set
> of source files.  Currently, I follow a rather cumbersome procedure
> when making changes to the code:
>
> 1. I change the Org file using the C-cC-c keystroke within the code
>    block I want to edit.
>
> 2. After editing, I press C-cc-c again to return to the main buffer.
>
> 3. I save the buffer.
>
> 4. I tangle the buffer using C-cC-vt.
>
> 5. For further editing, I press C-cC-c again.
>
> I know that 3. is optional, but this still leaves me with four steps
> instead of (ideally) just one.
>
> What I would like to have is a way of reducing all this to just one
> key command.  Would it make sense to introduce such a command that
> simply tangles the entire buffer, including the changes made in the
> language-specific buffer, but leaving that buffer open for editing?
> If it's a reasonably small change, could anyone introduce it?  (I
> don't have time to delve into the depths of org-mode.)
>
> Cheers,
>
>   András

Probably not what you want but, assuming that the keys you hit are
always the same, you could always define a keyboard macro, name it and
save it as emacs lisp code.

for example, the attached (because the insert-kbd-macro command creates
emacs lisp code with control characters) defines a new command which, if
starting from a code block special edit mode, exits that block, saves
the file, tangles the whole buffer and re-enters the code block:
You can then bind this new command to a key of your choice.  Untested...


[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: function definition --]
[-- Type: text/orgmode, Size: 375 bytes --]

* new function
  Allows one to exit a special code block editing mode, save the file,
  tangle all code blocks and then re-enter the code block editing
  mode.

#+begin_src emacs-lisp
(fset 'esf/org-save-tangle-reedit-macro
   (lambda (&optional arg) 
     "Keyboard macro." 
     (interactive "p") 
     (kmacro-exec-ring-item (quote ("\x03'\x18\x13\x03\x16t\x03'" 0 "%d")) arg)))
#+end_src


[-- Attachment #3: Type: text/plain, Size: 137 bytes --]



HTH,
eric
-- 
: Eric S Fraga (GnuPG: 0xC89193D8FFFCF67D) in Emacs 24.0.92.1
: using Org-mode version 7.8.03 (release_7.8.03.99.gce5c5)

Re: automatic tangle

[Eric Schulte]

András Major <andras.g.major@gmail.com> writes:

> Hi Sebastien,
>
>> I have the impression it's already there: if you edit your code directly in
>> the Org buffer, without opening an indirect buffer, the only thing you have to
>> do is:
>
> That's precisely what I want to avoid.  I'd like to use the
> language-specific indentation and highlighting using the indirect
> buffer.  Basically, what I'm after is a quick keyboard command that
> tangles the entire file while I'm in the indirect buffer.
>

The following functions provide for (1) easily executing code in the
org-mode buffer related to the current edit buffer and (2) tangling the
org-mode buffer related to the current edit buffer.  Binding (2) to a
key in `org-src-mode' should provide the functionality you describe.

#+BEGIN_SRC emacs-lisp
  (defmacro org-src-in-org-buffer (&rest body)
    `(save-window-excursion
       (org-edit-src-exit 'save)
       ,@body
       (setq msg (current-message))
       (if (eq org-src-window-setup 'other-frame)
           (let ((org-src-window-setup 'current-window))
             (org-edit-src-code 'save))
         (org-edit-src-code 'save))
       (message (or msg ""))))

  (defun org-src-tangle (arg)
    (interactive "P")
    (org-src-in-org-buffer (org-babel-tangle arg)))
#+END_SRC

I think that the above should be folded into org-src.el, but I'm not
entirely sure how.  (1) could be used to perform a number of functions
in the org buffer from an edit buffer, although off the top of my head
I'm not sure if there exists a need for this aside from tangling.

Best,

-- 
Eric Schulte
http://cs.unm.edu/~eschulte/

Re: automatic tangle

[András Major]

Thanks Eric,

Thanks a lot for the quick reply.  Any chances of this being
incorporated into Org-Mode in the near future?

  András


On 1/14/12, Eric Schulte <eric.schulte@gmx.com> wrote:
> András Major <andras.g.major@gmail.com> writes:
>
>> Hi Sebastien,
>>
>>> I have the impression it's already there: if you edit your code directly
>>> in
>>> the Org buffer, without opening an indirect buffer, the only thing you
>>> have to
>>> do is:
>>
>> That's precisely what I want to avoid.  I'd like to use the
>> language-specific indentation and highlighting using the indirect
>> buffer.  Basically, what I'm after is a quick keyboard command that
>> tangles the entire file while I'm in the indirect buffer.
>>
>
> The following functions provide for (1) easily executing code in the
> org-mode buffer related to the current edit buffer and (2) tangling the
> org-mode buffer related to the current edit buffer.  Binding (2) to a
> key in `org-src-mode' should provide the functionality you describe.
>
> #+BEGIN_SRC emacs-lisp
>   (defmacro org-src-in-org-buffer (&rest body)
>     `(save-window-excursion
>        (org-edit-src-exit 'save)
>        ,@body
>        (setq msg (current-message))
>        (if (eq org-src-window-setup 'other-frame)
>            (let ((org-src-window-setup 'current-window))
>              (org-edit-src-code 'save))
>          (org-edit-src-code 'save))
>        (message (or msg ""))))
>
>   (defun org-src-tangle (arg)
>     (interactive "P")
>     (org-src-in-org-buffer (org-babel-tangle arg)))
> #+END_SRC
>
> I think that the above should be folded into org-src.el, but I'm not
> entirely sure how.  (1) could be used to perform a number of functions
> in the org buffer from an edit buffer, although off the top of my head
> I'm not sure if there exists a need for this aside from tangling.
>
> Best,
>
> --
> Eric Schulte
> http://cs.unm.edu/~eschulte/
>

Re: automatic tangle

[Eric Schulte]

I've just added the two functions below to org-src.el.

Cheers,

András Major <andras.g.major@gmail.com> writes:

> Thanks Eric,
>
> Thanks a lot for the quick reply.  Any chances of this being
> incorporated into Org-Mode in the near future?
>
>   András
>
>
> On 1/14/12, Eric Schulte <eric.schulte@gmx.com> wrote:
>> András Major <andras.g.major@gmail.com> writes:
>>
>>> Hi Sebastien,
>>>
>>>> I have the impression it's already there: if you edit your code directly
>>>> in
>>>> the Org buffer, without opening an indirect buffer, the only thing you
>>>> have to
>>>> do is:
>>>
>>> That's precisely what I want to avoid.  I'd like to use the
>>> language-specific indentation and highlighting using the indirect
>>> buffer.  Basically, what I'm after is a quick keyboard command that
>>> tangles the entire file while I'm in the indirect buffer.
>>>
>>
>> The following functions provide for (1) easily executing code in the
>> org-mode buffer related to the current edit buffer and (2) tangling the
>> org-mode buffer related to the current edit buffer.  Binding (2) to a
>> key in `org-src-mode' should provide the functionality you describe.
>>
>> #+BEGIN_SRC emacs-lisp
>>   (defmacro org-src-in-org-buffer (&rest body)
>>     `(save-window-excursion
>>        (org-edit-src-exit 'save)
>>        ,@body
>>        (setq msg (current-message))
>>        (if (eq org-src-window-setup 'other-frame)
>>            (let ((org-src-window-setup 'current-window))
>>              (org-edit-src-code 'save))
>>          (org-edit-src-code 'save))
>>        (message (or msg ""))))
>>
>>   (defun org-src-tangle (arg)
>>     (interactive "P")
>>     (org-src-in-org-buffer (org-babel-tangle arg)))
>> #+END_SRC
>>
>> I think that the above should be folded into org-src.el, but I'm not
>> entirely sure how.  (1) could be used to perform a number of functions
>> in the org buffer from an edit buffer, although off the top of my head
>> I'm not sure if there exists a need for this aside from tangling.
>>
>> Best,
>>
>> --
>> Eric Schulte
>> http://cs.unm.edu/~eschulte/
>>
>

-- 
Eric Schulte
http://cs.unm.edu/~eschulte/