* [BUG] ob-R.el: extra empty data.frame columns generated from plain lists after recent change [9.6 (release_9.6-3-ga4d38e @ /usr/share/emacs/30.0.50/lisp/org/)] @ 2022-12-04 14:34 Johan Tolö 2022-12-05 2:43 ` Greg Minshall 2022-12-05 2:49 ` Greg Minshall 0 siblings, 2 replies; 33+ messages in thread From: Johan Tolö @ 2022-12-04 14:34 UTC (permalink / raw) To: emacs-orgmode After the changes to ob-core.el introduced in commit: b4e437f968771df9555f9306467846965857f632 plain lists passed to R source code blocks are generated with extra (empty) items. Example: #+name: alist - first item - second item - third item #+begin_src R :var list=alist list #+end_src #+RESULTS: | first item | second item | third item | | | | | | | | Expected result would be: #+RESULTS: | first item | second item | third item | as generated by: #+begin_src elisp :var list=alist list #+end_src #+RESULTS: | first item | second item | third item | Emacs : GNU Emacs 30.0.50 (build 1, x86_64-pc-linux-gnu, GTK+ Version 3.24.35, cairo version 1.17.6) of 2022-12-01 Package: Org mode version 9.6 (release_9.6-3-ga4d38e @ /usr/share/emacs/30.0.50/lisp/org/) -- Johan Tolö ^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: [BUG] ob-R.el: extra empty data.frame columns generated from plain lists after recent change [9.6 (release_9.6-3-ga4d38e @ /usr/share/emacs/30.0.50/lisp/org/)] 2022-12-04 14:34 [BUG] ob-R.el: extra empty data.frame columns generated from plain lists after recent change [9.6 (release_9.6-3-ga4d38e @ /usr/share/emacs/30.0.50/lisp/org/)] Johan Tolö @ 2022-12-05 2:43 ` Greg Minshall 2022-12-05 10:29 ` Johan Tolö 2022-12-05 18:57 ` Berry, Charles 2022-12-05 2:49 ` Greg Minshall 1 sibling, 2 replies; 33+ messages in thread From: Greg Minshall @ 2022-12-05 2:43 UTC (permalink / raw) To: Johan Tolö; +Cc: emacs-orgmode i see this same behavior. to me, (org-babel-R-assign-elisp) seems to be the problem, but it hasn't changed any time recently. (nor, if my =git blame= is done correctly, has anything else in ob-R.el.) i don't understand how (org-babel-R-assign-elisp) thinks. it seems to assign =max= and =min= assuming that =value= is a list of (at least one) list(s). this *might* be a fix. but, i don't have a lot of confidence it will not have bad side effects for other cases. (though i tested it with a simple list, and a simple table with more than one row, and a list of two lists, the first of length 3, the second of length 2.): ---- modified lisp/ob-R.el @@ -241,7 +241,7 @@ This function is called by `org-babel-execute-src-block'." (defun org-babel-R-assign-elisp (name value colnames-p rownames-p) "Construct R code assigning the elisp VALUE to a variable named NAME." (if (listp value) - (let* ((lengths (mapcar 'length (cl-remove-if-not 'sequencep value))) + (let* ((lengths (mapcar 'length (cl-remove-if-not 'listp value))) (max (if lengths (apply 'max lengths) 0)) (min (if lengths (apply 'min lengths) 0))) ;; Ensure VALUE has an orgtbl structure (depth of at least 2). ---- ^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: [BUG] ob-R.el: extra empty data.frame columns generated from plain lists after recent change [9.6 (release_9.6-3-ga4d38e @ /usr/share/emacs/30.0.50/lisp/org/)] 2022-12-05 2:43 ` Greg Minshall @ 2022-12-05 10:29 ` Johan Tolö 2022-12-05 11:21 ` Jérémie Juste 2022-12-05 18:57 ` Berry, Charles 1 sibling, 1 reply; 33+ messages in thread From: Johan Tolö @ 2022-12-05 10:29 UTC (permalink / raw) To: Greg Minshall; +Cc: emacs-orgmode Greg Minshall <minshall@umich.edu> writes: > i see this same behavior. to me, (org-babel-R-assign-elisp) > seems to be > the problem, but it hasn't changed any time recently. (nor, if > my =git > blame= is done correctly, has anything else in ob-R.el.) [snipped] Yeah, the problem is not a change to ob-R.el but the recent change to ob-core.el (see the message of the commit I referenced). But the change to ob-core.el is final if I understand it correctly which means that ob-R.el has to be updated. Sorry if I was unclear in my description. Named plain lists were previously turned into data.frames with each first level item in one row. Second level items were in the second column I believe. After the change to ob-core.el they are still data.frames but first level items form columns instead of rows. Second (or deeper) level items are dropped as they should be after the change to ob-core.el (according to the commit message). -- Johan Tolö ^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: [BUG] ob-R.el: extra empty data.frame columns generated from plain lists after recent change [9.6 (release_9.6-3-ga4d38e @ /usr/share/emacs/30.0.50/lisp/org/)] 2022-12-05 10:29 ` Johan Tolö @ 2022-12-05 11:21 ` Jérémie Juste 0 siblings, 0 replies; 33+ messages in thread From: Jérémie Juste @ 2022-12-05 11:21 UTC (permalink / raw) To: Johan Tolö; +Cc: Greg Minshall, emacs-orgmode [-- Attachment #1: Type: text/plain, Size: 1278 bytes --] Hello Johan, Many thanks for reporting the issue. I'll investigate further and submit a patch next weekend at the latest. Best regards, Jeremie On Mon, Dec 5, 2022 at 11:42 AM Johan Tolö <johan@toloe.se> wrote: > Greg Minshall <minshall@umich.edu> writes: > > > i see this same behavior. to me, (org-babel-R-assign-elisp) > > seems to be > > the problem, but it hasn't changed any time recently. (nor, if > > my =git > > blame= is done correctly, has anything else in ob-R.el.) > [snipped] > > Yeah, the problem is not a change to ob-R.el but the recent change > to ob-core.el (see the message of the commit I referenced). But > the change to ob-core.el is final if I understand it correctly > which means that ob-R.el has to be updated. Sorry if I was unclear > in my description. > > Named plain lists were previously turned into data.frames with > each first level item in one row. Second level items were in the > second column I believe. After the change to ob-core.el they are > still data.frames but first level items form columns instead of > rows. Second (or deeper) level items are dropped as they should be > after the change to ob-core.el (according to the commit message). > > -- > Johan Tolö > > -- Jérémie Juste [-- Attachment #2: Type: text/html, Size: 1835 bytes --] ^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: [BUG] ob-R.el: extra empty data.frame columns generated from plain lists after recent change [9.6 (release_9.6-3-ga4d38e @ /usr/share/emacs/30.0.50/lisp/org/)] 2022-12-05 2:43 ` Greg Minshall 2022-12-05 10:29 ` Johan Tolö @ 2022-12-05 18:57 ` Berry, Charles 2022-12-06 0:41 ` Greg Minshall 1 sibling, 1 reply; 33+ messages in thread From: Berry, Charles @ 2022-12-05 18:57 UTC (permalink / raw) To: Greg Minshall; +Cc: Johan Tolö, emacs-orgmode, Jeremie Juste > On Dec 4, 2022, at 6:43 PM, Greg Minshall <minshall@umich.edu> wrote: > > i see this same behavior. to me, (org-babel-R-assign-elisp) seems to be > the problem, but it hasn't changed any time recently. (nor, if my =git > blame= is done correctly, has anything else in ob-R.el.) > > i don't understand how (org-babel-R-assign-elisp) thinks. it seems to > assign =max= and =min= assuming that =value= is a list of (at least one) > list(s). > > this *might* be a fix. but, i don't have a lot of confidence it will > not have bad side effects for other cases. (though i tested it with a > simple list, and a simple table with more than one row, and a list of > two lists, the first of length 3, the second of length 2.): > ---- > modified lisp/ob-R.el > @@ -241,7 +241,7 @@ This function is called by `org-babel-execute-src-block'." > (defun org-babel-R-assign-elisp (name value colnames-p rownames-p) > "Construct R code assigning the elisp VALUE to a variable named NAME." > (if (listp value) > - (let* ((lengths (mapcar 'length (cl-remove-if-not 'sequencep value))) > + (let* ((lengths (mapcar 'length (cl-remove-if-not 'listp value))) > (max (if lengths (apply 'max lengths) 0)) > (min (if lengths (apply 'min lengths) 0))) > ;; Ensure VALUE has an orgtbl structure (depth of at least 2). - (unless (listp (car value)) (setq value (list value))) + (unless (listp (car value)) (setq value (mapcar 'list value))) > ---- This makes a list like '("a" "b" "c") into a data.frame with one column. HTH, Chuck ^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: [BUG] ob-R.el: extra empty data.frame columns generated from plain lists after recent change [9.6 (release_9.6-3-ga4d38e @ /usr/share/emacs/30.0.50/lisp/org/)] 2022-12-05 18:57 ` Berry, Charles @ 2022-12-06 0:41 ` Greg Minshall 2022-12-06 4:31 ` Berry, Charles 0 siblings, 1 reply; 33+ messages in thread From: Greg Minshall @ 2022-12-06 0:41 UTC (permalink / raw) To: Berry, Charles; +Cc: Johan Tolö, emacs-orgmode, Jeremie Juste hi, Charles, > This makes a list like '("a" "b" "c") into a data.frame with one column. 1. which version of Org are you running? : Org mode version 9.6 (9.6-g60de19 @ /home/minshall/.emacs.d/straight/build/org/): 2. is my below example yours? i think i used to see the behavior you describe in 9.5. cheers, Greg ---- #+begin_src R :var list='("a" "b" "c") list #+end_src #+RESULTS: | a | b | c | ^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: [BUG] ob-R.el: extra empty data.frame columns generated from plain lists after recent change [9.6 (release_9.6-3-ga4d38e @ /usr/share/emacs/30.0.50/lisp/org/)] 2022-12-06 0:41 ` Greg Minshall @ 2022-12-06 4:31 ` Berry, Charles 2022-12-06 6:52 ` Greg Minshall 0 siblings, 1 reply; 33+ messages in thread From: Berry, Charles @ 2022-12-06 4:31 UTC (permalink / raw) To: Greg Minshall; +Cc: Johan Tolö, emacs-orgmode, Jeremie Juste Hi Greg, > On Dec 5, 2022, at 4:41 PM, Greg Minshall <minshall@umich.edu> wrote: > > hi, Charles, > >> This makes a list like '("a" "b" "c") into a data.frame with one column. > > 1. which version of Org are you running? > : Org mode version 9.6 (9.6-g60de19 @ /home/minshall/.emacs.d/straight/build/org/): > Org mode version 9.6 (release_9.6-14-g53814a (dated 2022-12-02) > 2. is my below example yours? Not with the change I indicated (which includes your changes of sequencep to listp) I have #+begin_src R :var list='("a" "b" "c") list #+end_src #+RESULTS: | a | | b | | c | > > i think i used to see the behavior you describe in 9.5. > So, isn't that what is wanted? HTH, Chuck > cheers, Greg > > ---- > > #+begin_src R :var list='("a" "b" "c") > list > #+end_src > > #+RESULTS: > | a | b | c | ^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: [BUG] ob-R.el: extra empty data.frame columns generated from plain lists after recent change [9.6 (release_9.6-3-ga4d38e @ /usr/share/emacs/30.0.50/lisp/org/)] 2022-12-06 4:31 ` Berry, Charles @ 2022-12-06 6:52 ` Greg Minshall 0 siblings, 0 replies; 33+ messages in thread From: Greg Minshall @ 2022-12-06 6:52 UTC (permalink / raw) To: Berry, Charles; +Cc: Johan Tolö, emacs-orgmode, Jeremie Juste Chuck, sorry, i didn't see the change you had added. > So, isn't that what is wanted? that's a policy question that i can't answer. :) cheers, Greg ^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: [BUG] ob-R.el: extra empty data.frame columns generated from plain lists after recent change [9.6 (release_9.6-3-ga4d38e @ /usr/share/emacs/30.0.50/lisp/org/)] 2022-12-04 14:34 [BUG] ob-R.el: extra empty data.frame columns generated from plain lists after recent change [9.6 (release_9.6-3-ga4d38e @ /usr/share/emacs/30.0.50/lisp/org/)] Johan Tolö 2022-12-05 2:43 ` Greg Minshall @ 2022-12-05 2:49 ` Greg Minshall 2022-12-06 22:11 ` Jeremie Juste 1 sibling, 1 reply; 33+ messages in thread From: Greg Minshall @ 2022-12-05 2:49 UTC (permalink / raw) To: Johan Tolö; +Cc: emacs-orgmode for the record, these are the tests i ran with my off-the-cuff "fix" (s/sequencep/listp/): ---- #+name: alist - first item - second item - third item #+begin_src R :var list=alist :session ss list #+end_src #+RESULTS: | first item | second item | third item | #+begin_src R :var variable='(a test) variable #+end_src #+RESULTS: | a | test | #+name: atable | this | is | a | header | line | |------+----+---+--------+------| | 1 | 2 | 3 | 4 | 5 | | a | b | c | d | e | #+begin_src R :var list=atable :session ss list #+end_src #+RESULTS: | 1 | 2 | 3 | 4 | 5 | | a | b | c | d | e | #+begin_src R :var list='((1 2 3) (1 2)) list #+end_src #+RESULTS: | 1 | 2 | 3 | | 1 | 2 | | #+begin_src elisp :var list=alist list #+end_src #+RESULTS: | first item | second item | third item | ^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: [BUG] ob-R.el: extra empty data.frame columns generated from plain lists after recent change [9.6 (release_9.6-3-ga4d38e @ /usr/share/emacs/30.0.50/lisp/org/)] 2022-12-05 2:49 ` Greg Minshall @ 2022-12-06 22:11 ` Jeremie Juste 2022-12-07 1:31 ` Greg Minshall 2022-12-07 12:16 ` Ihor Radchenko 0 siblings, 2 replies; 33+ messages in thread From: Jeremie Juste @ 2022-12-06 22:11 UTC (permalink / raw) To: Greg Minshall; +Cc: Johan Tolö, emacs-orgmode, Berry, Charles Hello, Many thanks for the insights. I confess that I have never transferred list from org to R before. I've always use tables and as far as I understand they works fine in 9.6. So assuming this list #+name: alist - first item - second item - third item - 3.1 item - fourth item before c72d5ee84 we could do something like #+begin_src R :var list=alist list #+end_src #+RESULTS: | first item | | | second item | | | third item | (unordered (3.1 item)) | | fourth item | | and after we end up with #+begin_src R :var list=alist list #+end_src #+RESULTS: | first item | second item | third item | fourth item | | | | | | | Here I'm on uncharted territory. We could go with 1. | first item | second item | third item | fourth item | or be closer to the version 9.5 with 2. | first item | | second item | | third item | | fourth item | However I'm still tempted to choose the second option to break as little workflow as possible. If we go in this direction the solution of Chuck works fine. Many thanks for the suggestions. > @@ -241,7 +241,7 @@ This function is called by `org-babel-execute-src-block'." > (defun org-babel-R-assign-elisp (name value colnames-p rownames-p) > "Construct R code assigning the elisp VALUE to a variable named NAME." > (if (listp value) > - (let* ((lengths (mapcar 'length (cl-remove-if-not 'sequencep value))) > + (let* ((lengths (mapcar 'length (cl-remove-if-not 'listp value))) > (max (if lengths (apply 'max lengths) 0)) > (min (if lengths (apply 'min lengths) 0))) > ;; Ensure VALUE has an orgtbl structure (depth of at least 2). - (unless (listp (car value)) (setq value (list value))) + (unless (listp (car value)) (setq value (mapcar 'list value))) Do you have any case of using org-list to R? Do you think we could use the list for a different purpose. Suggestions are welcome. Best regards, Jeremie On Sunday, 4 Dec 2022 at 18:49, Greg Minshall wrote: > for the record, these are the tests i ran with my off-the-cuff "fix" > (s/sequencep/listp/): > ---- > > #+name: alist > - first item > > - second item > - third item > > #+begin_src R :var list=alist :session ss > list > #+end_src > > > #+RESULTS: > | first item | second item | third item | > > #+begin_src R :var variable='(a test) > variable > #+end_src > > > #+RESULTS: > | a | test | > > #+name: atable > | this | is | a | header | line | > > |------+----+---+--------+------| > | 1 | 2 | 3 | 4 | 5 | > | a | b | c | d | e | > > #+begin_src R :var list=atable :session ss > list > #+end_src > > > #+RESULTS: > | 1 | 2 | 3 | 4 | 5 | > | a | b | c | d | e | > > #+begin_src R :var list='((1 2 3) (1 2)) > list > #+end_src > > > #+RESULTS: > | 1 | 2 | 3 | > | 1 | 2 | | > > #+begin_src elisp :var list=alist > list > #+end_src > > #+RESULTS: > | first item | second item | third item | ^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: [BUG] ob-R.el: extra empty data.frame columns generated from plain lists after recent change [9.6 (release_9.6-3-ga4d38e @ /usr/share/emacs/30.0.50/lisp/org/)] 2022-12-06 22:11 ` Jeremie Juste @ 2022-12-07 1:31 ` Greg Minshall 2022-12-07 1:53 ` William Denton 2022-12-07 12:16 ` Ihor Radchenko 1 sibling, 1 reply; 33+ messages in thread From: Greg Minshall @ 2022-12-07 1:31 UTC (permalink / raw) To: Jeremie Juste; +Cc: Johan Tolö, emacs-orgmode, Berry, Charles Jeremie, i am neutral w.r.t. what the output should be. like you, i've always sent in tables. for me, i don't know that it makes much difference how lists are presented to R code, as long as it is well-defined and stable over time. given that, iiuc, 9.5 presented a list as (the equivalent of) multiple rows of a table, i'd vote for staying with (going back to) that. (i think that's what the two modifications in Chuck's e-mail give you.) cheers, Greg ^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: [BUG] ob-R.el: extra empty data.frame columns generated from plain lists after recent change [9.6 (release_9.6-3-ga4d38e @ /usr/share/emacs/30.0.50/lisp/org/)] 2022-12-07 1:31 ` Greg Minshall @ 2022-12-07 1:53 ` William Denton 0 siblings, 0 replies; 33+ messages in thread From: William Denton @ 2022-12-07 1:53 UTC (permalink / raw) To: emacs-orgmode On 6 December 2022, Greg Minshall wrote: > given that, iiuc, 9.5 presented a list as (the equivalent of) multiple > rows of a table, i'd vote for staying with (going back to) that. > > (i think that's what the two modifications in Chuck's e-mail give you.) I agree: I've never used this, but if it used to become rows of a table, let's keep it that way. In R we might think of the list as a vector, I guess, but there's no way to represent that nicely in Org, though it is easy to step through the rows of a column or table. Bill -- William Denton https://www.miskatonic.org/ Librarian, artist and licensed private investigator. Toronto, Canada ^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: [BUG] ob-R.el: extra empty data.frame columns generated from plain lists after recent change [9.6 (release_9.6-3-ga4d38e @ /usr/share/emacs/30.0.50/lisp/org/)] 2022-12-06 22:11 ` Jeremie Juste 2022-12-07 1:31 ` Greg Minshall @ 2022-12-07 12:16 ` Ihor Radchenko 2022-12-07 21:08 ` Jeremie Juste 1 sibling, 1 reply; 33+ messages in thread From: Ihor Radchenko @ 2022-12-07 12:16 UTC (permalink / raw) To: Jeremie Juste Cc: Greg Minshall, Johan Tolö, emacs-orgmode, Berry, Charles Jeremie Juste <jeremiejuste@gmail.com> writes: > Many thanks for the insights. I confess that I have never transferred > list from org to R before. I've always use tables and as far as I > understand they works fine in 9.6. > > So assuming this list > > #+name: alist > - first item > - second item > - third item > - 3.1 item > - fourth item > > > before c72d5ee84 we could do something like > > #+begin_src R :var list=alist > list > #+end_src > > #+RESULTS: > | first item | | > | second item | | > | third item | (unordered (3.1 item)) | > | fourth item | | And it was a bug that the ob-core patch fixed. Unfortunately, a number of babel backends also developed workarounds meanwhile. For the context, the ground truth is Org manual: 16.4 Environment of a Code Block list A simple named list. #+NAME: example-list - simple - not - nested - list #+BEGIN_SRC emacs-lisp :var x=example-list (print x) #+END_SRC #+RESULTS: | simple | list | Note that only the top level list items are passed along. Nested list items are ignored. > and after we end up with > > > #+begin_src R :var list=alist > list > #+end_src > > #+RESULTS: > | first item | second item | third item | fourth item | | | | | | | > > Here I'm on uncharted territory. We could go with > 1. > | first item | second item | third item | fourth item | > > or be closer to the version 9.5 with > 2. > | first item | > | second item | > | third item | > | fourth item | > > However I'm still tempted to choose the second option to break as little > workflow as possible. > > If we go in this direction the solution of Chuck works fine. Many thanks > for the suggestions. I also like the second option as **printing** more, but it is _not_ what we have in the manual. Note that the origin of the issue is in how list=alist is assigned. Before the problematic commit, we had awkward situation when alist=(("first item") ("second item") ...) I changed things to alist=("first item" "second item" ...) which makes a lot more sense when passed as variable value. Now, printing: ob-core prints lists as a special case of tables. Since ("first item" "second item" ...) is a row vector, we get | first item | second item | ... | changing row vectors to be printed as column vectors is easy, but I am afraid about non-trivial breakage. Hope the above clarifies about what happened and why I changes things like I did. -- Ihor Radchenko // yantar92, Org mode contributor, Learn more about Org mode at <https://orgmode.org/>. Support Org development at <https://liberapay.com/org-mode>, or support my work at <https://liberapay.com/yantar92> ^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: [BUG] ob-R.el: extra empty data.frame columns generated from plain lists after recent change [9.6 (release_9.6-3-ga4d38e @ /usr/share/emacs/30.0.50/lisp/org/)] 2022-12-07 12:16 ` Ihor Radchenko @ 2022-12-07 21:08 ` Jeremie Juste 2022-12-08 9:07 ` Ihor Radchenko 0 siblings, 1 reply; 33+ messages in thread From: Jeremie Juste @ 2022-12-07 21:08 UTC (permalink / raw) To: Ihor Radchenko Cc: Greg Minshall, Johan Tolö, emacs-orgmode, Berry, Charles Hello, Many thanks to you all for your feedback. From 1ad16ffb9, I have restored the expected output in R. that is. #+NAME: example-list - simple - not - nested - list #+BEGIN_SRC R :var x=example-list x #+END_SRC #+RESULTS: | simple | | list | On Wednesday, 7 Dec 2022 at 12:16, Ihor Radchenko wrote: > I also like the second option as **printing** more, but it is _not_ what > we have in the manual. Thanks for the precision. We propably need to update the doc. I guess it also has to be language specific. Best regards, Jeremie ^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: [BUG] ob-R.el: extra empty data.frame columns generated from plain lists after recent change [9.6 (release_9.6-3-ga4d38e @ /usr/share/emacs/30.0.50/lisp/org/)] 2022-12-07 21:08 ` Jeremie Juste @ 2022-12-08 9:07 ` Ihor Radchenko 2022-12-08 12:42 ` Greg Minshall 2022-12-11 15:31 ` [BUG] ob-R.el: extra empty data.frame columns generated from plain lists after recent change [9.6 (release_9.6-3-ga4d38e @ /usr/share/emacs/30.0.50/lisp/org/)] Jeremie Juste 0 siblings, 2 replies; 33+ messages in thread From: Ihor Radchenko @ 2022-12-08 9:07 UTC (permalink / raw) To: Jeremie Juste Cc: Greg Minshall, Johan Tolö, emacs-orgmode, Berry, Charles Jeremie Juste <jeremiejuste@gmail.com> writes: > Many thanks to you all for your feedback. > From 1ad16ffb9, I have restored the expected output in R. that is. > > > #+NAME: example-list > - simple > - not > - nested > - list > > #+BEGIN_SRC R :var x=example-list > x > #+END_SRC > > #+RESULTS: > | simple | > | list | I am not sure if I like the approach you used in the commit. - (unless (listp (car value)) (setq value (list value))) + (unless (listp (car value)) (setq value (mapcar 'list value))) In the above, you are transforming (val1 val2 val3 ...) list into ((val1) (val2) (val3) ...). Does it make sense from the point of view of R code? AFAIU, the current ob-R implementation converts lists into R tables, which is not accurate? Would it make sense to convert Elisp lists into R lists directly? -- Ihor Radchenko // yantar92, Org mode contributor, Learn more about Org mode at <https://orgmode.org/>. Support Org development at <https://liberapay.com/org-mode>, or support my work at <https://liberapay.com/yantar92> ^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: [BUG] ob-R.el: extra empty data.frame columns generated from plain lists after recent change [9.6 (release_9.6-3-ga4d38e @ /usr/share/emacs/30.0.50/lisp/org/)] 2022-12-08 9:07 ` Ihor Radchenko @ 2022-12-08 12:42 ` Greg Minshall 2022-12-08 12:51 ` Ihor Radchenko 2022-12-11 15:31 ` [BUG] ob-R.el: extra empty data.frame columns generated from plain lists after recent change [9.6 (release_9.6-3-ga4d38e @ /usr/share/emacs/30.0.50/lisp/org/)] Jeremie Juste 1 sibling, 1 reply; 33+ messages in thread From: Greg Minshall @ 2022-12-08 12:42 UTC (permalink / raw) To: Ihor Radchenko Cc: Jeremie Juste, Johan Tolö, emacs-orgmode, Berry, Charles Ihor, > Does it make sense from the point of view of R code? > AFAIU, the current ob-R implementation converts lists into R tables, > which is not accurate? Would it make sense to convert Elisp lists into R > lists directly? my "barely half a cent" would be that backwards compatibility here trumps, hmm, "logic". i suspect a note in the wiki page for ob-R stating that lists are converted to single-column tables would be sufficient. (partly because i think people writing code need to refer to such pages to understand these sorts of mappings.) (one could make the case that "no one" passes lists to R code; that could push *me* towards your suggestion.) cheers, Greg ^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: [BUG] ob-R.el: extra empty data.frame columns generated from plain lists after recent change [9.6 (release_9.6-3-ga4d38e @ /usr/share/emacs/30.0.50/lisp/org/)] 2022-12-08 12:42 ` Greg Minshall @ 2022-12-08 12:51 ` Ihor Radchenko 2022-12-08 13:33 ` Greg Minshall 2022-12-10 12:31 ` Johan Tolö 0 siblings, 2 replies; 33+ messages in thread From: Ihor Radchenko @ 2022-12-08 12:51 UTC (permalink / raw) To: Greg Minshall Cc: Jeremie Juste, Johan Tolö, emacs-orgmode, Berry, Charles Greg Minshall <minshall@umich.edu> writes: >> Does it make sense from the point of view of R code? >> AFAIU, the current ob-R implementation converts lists into R tables, >> which is not accurate? Would it make sense to convert Elisp lists into R >> lists directly? > > my "barely half a cent" would be that backwards compatibility here > trumps, hmm, "logic". i suspect a note in the wiki page for ob-R > stating that lists are converted to single-column tables would be > sufficient. (partly because i think people writing code need to refer > to such pages to understand these sorts of mappings.) > > (one could make the case that "no one" passes lists to R code; that > could push *me* towards your suggestion.) Once upon a time, ob-core converted lists to actual lists. It is what is reflected in the manual. Later, the code was changed and lists were interpreted as lists of lists. Now, I reverted to the original behaviour. The time span is years and I do not recall any related bug reports. So, nobody seems to care. -- Ihor Radchenko // yantar92, Org mode contributor, Learn more about Org mode at <https://orgmode.org/>. Support Org development at <https://liberapay.com/org-mode>, or support my work at <https://liberapay.com/yantar92> ^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: [BUG] ob-R.el: extra empty data.frame columns generated from plain lists after recent change [9.6 (release_9.6-3-ga4d38e @ /usr/share/emacs/30.0.50/lisp/org/)] 2022-12-08 12:51 ` Ihor Radchenko @ 2022-12-08 13:33 ` Greg Minshall 2022-12-10 12:31 ` Johan Tolö 1 sibling, 0 replies; 33+ messages in thread From: Greg Minshall @ 2022-12-08 13:33 UTC (permalink / raw) To: Ihor Radchenko Cc: Jeremie Juste, Johan Tolö, emacs-orgmode, Berry, Charles Ihor, > The time span is years and I do not recall any related bug reports. > So, nobody seems to care. :) ^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: [BUG] ob-R.el: extra empty data.frame columns generated from plain lists after recent change [9.6 (release_9.6-3-ga4d38e @ /usr/share/emacs/30.0.50/lisp/org/)] 2022-12-08 12:51 ` Ihor Radchenko 2022-12-08 13:33 ` Greg Minshall @ 2022-12-10 12:31 ` Johan Tolö 2022-12-11 8:51 ` [FR] Allow passing nested list structures to variables in src blocks (was: [BUG] ob-R.el: extra empty data.frame columns generated from plain lists after recent change [9.6 (release_9.6-3-ga4d38e @ /usr/share/emacs/30.0.50/lisp/org/)]) Ihor Radchenko 1 sibling, 1 reply; 33+ messages in thread From: Johan Tolö @ 2022-12-10 12:31 UTC (permalink / raw) To: Ihor Radchenko Cc: Greg Minshall, Jeremie Juste, emacs-orgmode, Berry, Charles Ihor Radchenko <yantar92@posteo.net> writes: > Greg Minshall <minshall@umich.edu> writes: [snipped] > The time span is years and I do not recall any related bug > reports. > So, nobody seems to care. I do pass org plain lists to R source code blocks which is why I found the current issue. It is easy enough for me to adapt my R code whenever there is a change in the way it is handled. It is unfortunate that it will no longer be possible to access any nested elements of plain lists but it does not affect me because I was not using that feature. I think that the output from R source code blocks should be as close to the example in the org manual as possible. I also think that the handling within ob-R.el should be as simple as possible. I do not mind if that means that I have to convert a data.frame from columns to rows. For anyone wondering, you can simply unlist() a data.frame to get a vector of the columns. Johan -- Johan Tolö ^ permalink raw reply [flat|nested] 33+ messages in thread
* [FR] Allow passing nested list structures to variables in src blocks (was: [BUG] ob-R.el: extra empty data.frame columns generated from plain lists after recent change [9.6 (release_9.6-3-ga4d38e @ /usr/share/emacs/30.0.50/lisp/org/)]) 2022-12-10 12:31 ` Johan Tolö @ 2022-12-11 8:51 ` Ihor Radchenko 0 siblings, 0 replies; 33+ messages in thread From: Ihor Radchenko @ 2022-12-11 8:51 UTC (permalink / raw) To: Johan Tolö Cc: Greg Minshall, Jeremie Juste, emacs-orgmode, Berry, Charles Johan Tolö <johan@toloe.se> writes: > I do pass org plain lists to R source code blocks which is why I > found the current issue. It is easy enough for me to adapt my R > code whenever there is a change in the way it is handled. It is > unfortunate that it will no longer be possible to access any > nested elements of plain lists but it does not affect me because I > was not using that feature. If necessary, we may adapt the recent idea with list-name[] and allow passing ranges to the lists, similar to tables. What I have in mind: 1. variable=list-name will assign top-level items as a list (item1 item2 ...) 2. variable=list-name[] will allow nesting: ((item1) (item2 (sub-list)) ...) 3. variable=list-name[from:to,...] It will be a new feature, of course. > I think that the output from R source code blocks should be as > close to the example in the org manual as possible. I also think > that the handling within ob-R.el should be as simple as possible. > I do not mind if that means that I have to convert a data.frame > from columns to rows. > > For anyone wondering, you can simply unlist() a data.frame to get > a vector of the columns. I am also in favour of staying as close as possible to the manual. I find converting lists to tables non-intuitive. -- Ihor Radchenko // yantar92, Org mode contributor, Learn more about Org mode at <https://orgmode.org/>. Support Org development at <https://liberapay.com/org-mode>, or support my work at <https://liberapay.com/yantar92> ^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: [BUG] ob-R.el: extra empty data.frame columns generated from plain lists after recent change [9.6 (release_9.6-3-ga4d38e @ /usr/share/emacs/30.0.50/lisp/org/)] 2022-12-08 9:07 ` Ihor Radchenko 2022-12-08 12:42 ` Greg Minshall @ 2022-12-11 15:31 ` Jeremie Juste 2022-12-12 9:47 ` Ihor Radchenko 1 sibling, 1 reply; 33+ messages in thread From: Jeremie Juste @ 2022-12-11 15:31 UTC (permalink / raw) To: Ihor Radchenko Cc: Greg Minshall, Johan Tolö, emacs-orgmode, Berry, Charles Hello Ihor On Thursday, 8 Dec 2022 at 09:07, Ihor Radchenko wrote: > I am not sure if I like the approach you used in the commit. > > - (unless (listp (car value)) (setq value (list value))) > + (unless (listp (car value)) (setq value (mapcar 'list value))) > > In the above, you are transforming (val1 val2 val3 ...) list into > ((val1) (val2) (val3) ...). > > Does it make sense from the point of view of R code? > AFAIU, the current ob-R implementation converts lists into R tables, > which is not accurate? Would it make sense to convert Elisp lists into R > lists directly? Many thanks for the feedback. At this point I don't know. On one hand you are right on the other, this option is backward compatible, and the user can always create an interface in R to suit his need. If there are more complaints about that in the future, I'll reconsider. Best regards, Jeremie ^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: [BUG] ob-R.el: extra empty data.frame columns generated from plain lists after recent change [9.6 (release_9.6-3-ga4d38e @ /usr/share/emacs/30.0.50/lisp/org/)] 2022-12-11 15:31 ` [BUG] ob-R.el: extra empty data.frame columns generated from plain lists after recent change [9.6 (release_9.6-3-ga4d38e @ /usr/share/emacs/30.0.50/lisp/org/)] Jeremie Juste @ 2022-12-12 9:47 ` Ihor Radchenko 2022-12-12 12:17 ` Greg Minshall ` (2 more replies) 0 siblings, 3 replies; 33+ messages in thread From: Ihor Radchenko @ 2022-12-12 9:47 UTC (permalink / raw) To: Jeremie Juste, Bastien Cc: Greg Minshall, Johan Tolö, emacs-orgmode, Berry, Charles Jeremie Juste <jeremiejuste@gmail.com> writes: > On Thursday, 8 Dec 2022 at 09:07, Ihor Radchenko wrote: > >> I am not sure if I like the approach you used in the commit. >> >> - (unless (listp (car value)) (setq value (list value))) >> + (unless (listp (car value)) (setq value (mapcar 'list value))) >> >> In the above, you are transforming (val1 val2 val3 ...) list into >> ((val1) (val2) (val3) ...). >> >> Does it make sense from the point of view of R code? >> AFAIU, the current ob-R implementation converts lists into R tables, >> which is not accurate? Would it make sense to convert Elisp lists into R >> lists directly? > > Many thanks for the feedback. At this point I don't know. On one hand you are > right on the other, this option is backward compatible, and the user can > always create an interface in R to suit his need. > > If there are more complaints about that in the future, I'll reconsider. Note that my NEWS entry may not be accurate for ob-R then: ** List references in source block variable assignments are now proper lists So, we may create confusion one way or another. Or I may need to put a special clause regarding ob-R into the NEWS item. Bastien, maybe you have something to say about this situation? -- Ihor Radchenko // yantar92, Org mode contributor, Learn more about Org mode at <https://orgmode.org/>. Support Org development at <https://liberapay.com/org-mode>, or support my work at <https://liberapay.com/yantar92> ^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: [BUG] ob-R.el: extra empty data.frame columns generated from plain lists after recent change [9.6 (release_9.6-3-ga4d38e @ /usr/share/emacs/30.0.50/lisp/org/)] 2022-12-12 9:47 ` Ihor Radchenko @ 2022-12-12 12:17 ` Greg Minshall 2022-12-12 12:27 ` Ihor Radchenko 2022-12-13 13:29 ` Johan Tolö 2022-12-29 16:00 ` Bastien Guerry 2022-12-30 9:24 ` Bastien Guerry 2 siblings, 2 replies; 33+ messages in thread From: Greg Minshall @ 2022-12-12 12:17 UTC (permalink / raw) To: Ihor Radchenko Cc: Jeremie Juste, Bastien, Johan Tolö, emacs-orgmode, Berry, Charles hi, Ihor, > ** List references in source block variable assignments are now proper lists just for background, one oddity is that the meaning of a "list" in R is a bit loose. ---- > list(1,2,3) [[1]] [1] 1 [[2]] [1] 2 [[3]] [1] 3 > c(1,2,3) [1] 1 2 3 ---- (where =c= is the "concatenation operator".) so, to me, at least, "proper list" is not a well-defined term in R. cheers, Greg ^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: [BUG] ob-R.el: extra empty data.frame columns generated from plain lists after recent change [9.6 (release_9.6-3-ga4d38e @ /usr/share/emacs/30.0.50/lisp/org/)] 2022-12-12 12:17 ` Greg Minshall @ 2022-12-12 12:27 ` Ihor Radchenko 2022-12-13 13:29 ` Johan Tolö 1 sibling, 0 replies; 33+ messages in thread From: Ihor Radchenko @ 2022-12-12 12:27 UTC (permalink / raw) To: Greg Minshall Cc: Jeremie Juste, Bastien, Johan Tolö, emacs-orgmode, Berry, Charles Greg Minshall <minshall@umich.edu> writes: >> ** List references in source block variable assignments are now proper lists > > just for background, one oddity is that the meaning of a "list" in R is > a bit loose. > ... > so, to me, at least, "proper list" is not a well-defined term in R. Sounds reasonable. I also tried > list_data <- list("a", list("b"), "c") > print(list_data[1]) [[1]] [1] "a" > print(list_data[2]) [[1]] [[1]][[1]] [1] "b" > print(list_data[3]) [[1]] [1] "c" Although, I am not sure if there are no subtle issues with the actual representation. -- Ihor Radchenko // yantar92, Org mode contributor, Learn more about Org mode at <https://orgmode.org/>. Support Org development at <https://liberapay.com/org-mode>, or support my work at <https://liberapay.com/yantar92> ^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: [BUG] ob-R.el: extra empty data.frame columns generated from plain lists after recent change [9.6 (release_9.6-3-ga4d38e @ /usr/share/emacs/30.0.50/lisp/org/)] 2022-12-12 12:17 ` Greg Minshall 2022-12-12 12:27 ` Ihor Radchenko @ 2022-12-13 13:29 ` Johan Tolö 2022-12-14 2:53 ` Greg Minshall 1 sibling, 1 reply; 33+ messages in thread From: Johan Tolö @ 2022-12-13 13:29 UTC (permalink / raw) To: Greg Minshall Cc: Ihor Radchenko, Jeremie Juste, Bastien, emacs-orgmode, Berry, Charles Greg Minshall <minshall@umich.edu> writes: >> list(1,2,3) > [[1]] > [1] 1 > > [[2]] > [1] 2 > > [[3]] > [1] 3 > >> c(1,2,3) > [1] 1 2 3 > ---- > (where =c= is the "concatenation operator".) > > so, to me, at least, "proper list" is not a well-defined term in > R. > > cheers, Greg =c= is "a generic function which combines its arguments" according to the R documentation. It could do different things depending on the input. =list()= will create an actual R list which are "Generic Vectors" according to the R documentation. Each element of a list can be any other R data structure including other lists, expressions and symbols. "Proper list" in the context of this discussion and pertaining to R would be a =list()=, not a vector which is what is usually returned by =c()=. A =data.frame()= is a special case of a =list()= where every column has to have the same length. Johan -- Johan Tolö ^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: [BUG] ob-R.el: extra empty data.frame columns generated from plain lists after recent change [9.6 (release_9.6-3-ga4d38e @ /usr/share/emacs/30.0.50/lisp/org/)] 2022-12-13 13:29 ` Johan Tolö @ 2022-12-14 2:53 ` Greg Minshall 2022-12-15 8:51 ` Johan Tolö 0 siblings, 1 reply; 33+ messages in thread From: Greg Minshall @ 2022-12-14 2:53 UTC (permalink / raw) To: Johan Tolö Cc: Ihor Radchenko, Jeremie Juste, Bastien, emacs-orgmode, Berry, Charles hi, Johan, > "Proper list" in the context of this discussion and pertaining to R > would be a =list()=, not a vector which is what is usually returned by > =c()=. A =data.frame()= is a special case of a =list()= where every > column has to have the same length. well, it's a language mapping problem. what one considers a "list" in org-mode is - well - something like - this - maybe with - this whereas in e-lisp, '("well" "something like" '("this" '("maybe with" "this"))). then, the question arises of how to translate something like that to whatever data structures a given programming language offers. it *might* be to something that programming language calls a "list". if we are ignoring "sub lists", then for R, one could argue either vectors or lists. (someone -- possibly you? -- pointed out that going from an R list to a vector is as simple as an unlist() call.) if we ever want to provide support for sub lists, then passing lists as R lists seems like the way to go. cheers, Greg ---- > list("well", "something like", list("this", list("maybe with"))) [[1]] [1] "well" [[2]] [1] "something like" [[3]] [[3]][[1]] [1] "this" [[3]][[2]] [[3]][[2]][[1]] [1] "maybe with" > unlist(list("well", "something like", list("this", list("maybe with")))) [1] "well" "something like" "this" "maybe with" ^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: [BUG] ob-R.el: extra empty data.frame columns generated from plain lists after recent change [9.6 (release_9.6-3-ga4d38e @ /usr/share/emacs/30.0.50/lisp/org/)] 2022-12-14 2:53 ` Greg Minshall @ 2022-12-15 8:51 ` Johan Tolö 2022-12-15 17:50 ` Greg Minshall 0 siblings, 1 reply; 33+ messages in thread From: Johan Tolö @ 2022-12-15 8:51 UTC (permalink / raw) To: Greg Minshall Cc: Ihor Radchenko, Jeremie Juste, Bastien, Berry, Charles, emacs-orgmode Greg Minshall <minshall@umich.edu> writes: [snipped] >> "Proper list" in the context of this discussion and pertaining >> to R >> would be a =list()=, not a vector which is what is usually >> returned by >> =c()=. A =data.frame()= is a special case of a =list()= where >> every >> column has to have the same length. > > well, it's a language mapping problem. what one considers a > "list" in > org-mode is > - well > - something like > - this > - maybe with > - this > > whereas in e-lisp, '("well" "something like" '("this" '("maybe > with" > "this"))). Absolutely, I just wanted to clarify that there is no confusion as to what an R list is in the context of R itself (as far as I can tell). Your post made it sound like there is. [snipped] -- Johan Tolö ^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: [BUG] ob-R.el: extra empty data.frame columns generated from plain lists after recent change [9.6 (release_9.6-3-ga4d38e @ /usr/share/emacs/30.0.50/lisp/org/)] 2022-12-15 8:51 ` Johan Tolö @ 2022-12-15 17:50 ` Greg Minshall 0 siblings, 0 replies; 33+ messages in thread From: Greg Minshall @ 2022-12-15 17:50 UTC (permalink / raw) To: Johan Tolö Cc: Ihor Radchenko, Jeremie Juste, Bastien, Berry, Charles, emacs-orgmode Johan, > Absolutely, I just wanted to clarify that there is no confusion as to > what an R list is in the context of R itself (as far as I can > tell). Your post made it sound like there is. ah, indeed -- thanks! cheers, Greg ^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: [BUG] ob-R.el: extra empty data.frame columns generated from plain lists after recent change [9.6 (release_9.6-3-ga4d38e @ /usr/share/emacs/30.0.50/lisp/org/)] 2022-12-12 9:47 ` Ihor Radchenko 2022-12-12 12:17 ` Greg Minshall @ 2022-12-29 16:00 ` Bastien Guerry 2022-12-29 23:52 ` Berry, Charles 2022-12-30 9:24 ` Bastien Guerry 2 siblings, 1 reply; 33+ messages in thread From: Bastien Guerry @ 2022-12-29 16:00 UTC (permalink / raw) To: Ihor Radchenko Cc: Jeremie Juste, Greg Minshall, Johan Tolö, emacs-orgmode, Berry, Charles I think it would make sense to convert Elisp lists into R lists directly. Jeremie, would you be okay with this? Ihor Radchenko <yantar92@posteo.net> writes: > Or I may need to put a special clause regarding ob-R into the NEWS > item. ... that way we don't need such a special clause regarding ob-R. 2 cts, -- Bastien ^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: [BUG] ob-R.el: extra empty data.frame columns generated from plain lists after recent change [9.6 (release_9.6-3-ga4d38e @ /usr/share/emacs/30.0.50/lisp/org/)] 2022-12-29 16:00 ` Bastien Guerry @ 2022-12-29 23:52 ` Berry, Charles 2022-12-30 9:25 ` Bastien 2022-12-31 12:42 ` Ihor Radchenko 0 siblings, 2 replies; 33+ messages in thread From: Berry, Charles @ 2022-12-29 23:52 UTC (permalink / raw) To: Bastien Guerry Cc: Ihor Radchenko, Jeremie Juste, Greg Minshall, Johan Tolö, emacs-orgmode@gnu.org Bastien et al, > On Dec 29, 2022, at 8:00 AM, Bastien Guerry <bzg@gnu.org> wrote: > > I think it would make sense to convert Elisp lists into R lists > directly. Jeremie, would you be okay with this? > Perhaps there are some hiccups. The R `data.frame' type is a list with some added attributes. In that list each top level element is a *column* in the data.frame. In the elisp list produced by rendering a table as in `:var mydf=atab', each top level element is a sequence containing one *row* of the table `atab'. So if elisp lists are to be converted to R lists, ob-R will need to know whether the list came from a table to decide whether to render top level elements as list elements or as data.frame rows. --- There might be some useful applications for converting org lists to R lists and vice versa. But it looks like a significant amount of effort to get it right. Best, Chuck ^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: [BUG] ob-R.el: extra empty data.frame columns generated from plain lists after recent change [9.6 (release_9.6-3-ga4d38e @ /usr/share/emacs/30.0.50/lisp/org/)] 2022-12-29 23:52 ` Berry, Charles @ 2022-12-30 9:25 ` Bastien 2022-12-31 12:42 ` Ihor Radchenko 1 sibling, 0 replies; 33+ messages in thread From: Bastien @ 2022-12-30 9:25 UTC (permalink / raw) To: Berry, Charles Cc: Ihor Radchenko, Jeremie Juste, Greg Minshall, Johan Tolö, emacs-orgmode@gnu.org "Berry, Charles" <ccberry@health.ucsd.edu> writes: > The R `data.frame' type is a list with some added attributes. In > that list each top level element is a *column* in the data.frame. Thanks for the explanation. > There might be some useful applications for converting org lists to R > lists and vice versa. But it looks like a significant amount of effort > to get it right. Yes... up to Jeremie, depending on users' needs. Best, -- Bastien ^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: [BUG] ob-R.el: extra empty data.frame columns generated from plain lists after recent change [9.6 (release_9.6-3-ga4d38e @ /usr/share/emacs/30.0.50/lisp/org/)] 2022-12-29 23:52 ` Berry, Charles 2022-12-30 9:25 ` Bastien @ 2022-12-31 12:42 ` Ihor Radchenko 1 sibling, 0 replies; 33+ messages in thread From: Ihor Radchenko @ 2022-12-31 12:42 UTC (permalink / raw) To: Berry, Charles Cc: Bastien Guerry, Jeremie Juste, Greg Minshall, Johan Tolö, emacs-orgmode@gnu.org "Berry, Charles" <ccberry@health.ucsd.edu> writes: > So if elisp lists are to be converted to R lists, ob-R will need to know whether the list came from a table to decide whether to render top level elements as list elements or as data.frame rows. This information should be available: lists are passed as Elisp lists to ob-R; tables are passed as lists of lists. -- Ihor Radchenko // yantar92, Org mode contributor, Learn more about Org mode at <https://orgmode.org/>. Support Org development at <https://liberapay.com/org-mode>, or support my work at <https://liberapay.com/yantar92> ^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: [BUG] ob-R.el: extra empty data.frame columns generated from plain lists after recent change [9.6 (release_9.6-3-ga4d38e @ /usr/share/emacs/30.0.50/lisp/org/)] 2022-12-12 9:47 ` Ihor Radchenko 2022-12-12 12:17 ` Greg Minshall 2022-12-29 16:00 ` Bastien Guerry @ 2022-12-30 9:24 ` Bastien Guerry 2 siblings, 0 replies; 33+ messages in thread From: Bastien Guerry @ 2022-12-30 9:24 UTC (permalink / raw) To: Ihor Radchenko Cc: Jeremie Juste, Greg Minshall, Johan Tolö, emacs-orgmode, Berry, Charles So, based on Charles recent feedback: >> If there are more complaints about that in the future, I'll >> reconsider. ... let's do as Jeremie originally said: wait until someone complains. > Note that my NEWS entry may not be accurate for ob-R then: > > ** List references in source block variable assignments are now proper lists > > So, we may create confusion one way or another. > > Or I may need to put a special clause regarding ob-R into the NEWS > item. And add this special clause regarding ob-R into the NEWS item. Ihor, could you do that? -- Bastien ^ permalink raw reply [flat|nested] 33+ messages in thread
end of thread, other threads:[~2022-12-31 12:42 UTC | newest] Thread overview: 33+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2022-12-04 14:34 [BUG] ob-R.el: extra empty data.frame columns generated from plain lists after recent change [9.6 (release_9.6-3-ga4d38e @ /usr/share/emacs/30.0.50/lisp/org/)] Johan Tolö 2022-12-05 2:43 ` Greg Minshall 2022-12-05 10:29 ` Johan Tolö 2022-12-05 11:21 ` Jérémie Juste 2022-12-05 18:57 ` Berry, Charles 2022-12-06 0:41 ` Greg Minshall 2022-12-06 4:31 ` Berry, Charles 2022-12-06 6:52 ` Greg Minshall 2022-12-05 2:49 ` Greg Minshall 2022-12-06 22:11 ` Jeremie Juste 2022-12-07 1:31 ` Greg Minshall 2022-12-07 1:53 ` William Denton 2022-12-07 12:16 ` Ihor Radchenko 2022-12-07 21:08 ` Jeremie Juste 2022-12-08 9:07 ` Ihor Radchenko 2022-12-08 12:42 ` Greg Minshall 2022-12-08 12:51 ` Ihor Radchenko 2022-12-08 13:33 ` Greg Minshall 2022-12-10 12:31 ` Johan Tolö 2022-12-11 8:51 ` [FR] Allow passing nested list structures to variables in src blocks (was: [BUG] ob-R.el: extra empty data.frame columns generated from plain lists after recent change [9.6 (release_9.6-3-ga4d38e @ /usr/share/emacs/30.0.50/lisp/org/)]) Ihor Radchenko 2022-12-11 15:31 ` [BUG] ob-R.el: extra empty data.frame columns generated from plain lists after recent change [9.6 (release_9.6-3-ga4d38e @ /usr/share/emacs/30.0.50/lisp/org/)] Jeremie Juste 2022-12-12 9:47 ` Ihor Radchenko 2022-12-12 12:17 ` Greg Minshall 2022-12-12 12:27 ` Ihor Radchenko 2022-12-13 13:29 ` Johan Tolö 2022-12-14 2:53 ` Greg Minshall 2022-12-15 8:51 ` Johan Tolö 2022-12-15 17:50 ` Greg Minshall 2022-12-29 16:00 ` Bastien Guerry 2022-12-29 23:52 ` Berry, Charles 2022-12-30 9:25 ` Bastien 2022-12-31 12:42 ` Ihor Radchenko 2022-12-30 9:24 ` Bastien Guerry
Code repositories for project(s) associated with this public inbox https://git.savannah.gnu.org/cgit/emacs/org-mode.git This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).