Bug: linum-mode + org-indent-mode cursor movement problems [8.2.10 (release_8.2.10 @ /usr/share/emacs/25.2/lisp/org/)]

Bug: linum-mode + org-indent-mode cursor movement problems [8.2.10 (release_8.2.10 @ /usr/share/emacs/25.2/lisp/org/)]

[Tom Schutter]

If both linum-mode (or nlinum-mode) and org-indent-mode are enabled, 
then moving the cursor to the previous line using <up> causes it to jump 
horizontally to the right.  The jump matches the current indentation.  I 
would expect the cursor to remain in the same column.

Load linum.org (contents below) with minimal config.  linum.org will 
enable linum-mode and org-indent-mode:

   emacs -Q linum.org

Place your cursor on the "2" in the fourth line and press <up>.  The 
cursor will jump two columns to the right to the "4" in the third line. 
Press <up> again and the cursor will move to the "4" in the second line. 
  Press <up> again and the cursor will jump back to the "e" in the first 
line.

What is interesting is that you get different behavior when using 
<down>.  The cursor remains in the same column as you move down each 
line.  So starting on the "e" in the first line, pressing <down> moves 
the cursor to the "2" on the second line.

If you insert a second level heading in between the first and the second 
line, then the jumps will be four columns instead of two.

I discovered this problem first in nlimum-mode, but it is easier to 
reproduce using linum-mode when starting Emacs with -Q.

Contents of linum.org:

   * heading
   1234 line 2
   1234 line 3
   1234 line 4
   # Local Variables:
   # eval: (org-indent-mode 1)
   # eval: (linum-mode 1)
   # End:


Emacs  : GNU Emacs 25.2.2 (x86_64-pc-linux-gnu, GTK+ Version 3.22.21)
  of 2017-09-22, modified by Debian
Package: Org-mode version 8.2.10 (release_8.2.10 @ 
/usr/share/emacs/25.2/lisp/org/)

current state:
==============
(setq
  org-tab-first-hook '(org-hide-block-toggle-maybe
               org-src-native-tab-command-maybe
               org-babel-hide-result-toggle-maybe
               org-babel-header-arg-expand)
  org-speed-command-hook '(org-speed-command-default-hook
               org-babel-speed-command-hook)
  org-occur-hook '(org-first-headline-recenter)
  org-metaup-hook '(org-babel-load-in-session-maybe)
  org-confirm-shell-link-function 'yes-or-no-p
  org-after-todo-state-change-hook '(org-clock-out-if-current)
  org-src-mode-hook '(org-src-babel-configure-edit-buffer
              org-src-mode-configure-edit-buffer)
  org-agenda-before-write-hook '(org-agenda-add-entry-text)
  org-babel-pre-tangle-hook '(save-buffer)
  org-mode-hook '(#[nil "\300\301\302\303\304$\207"
            [org-add-hook change-major-mode-hook org-show-block-all
             append local]
            5]
          #[nil "\300\301\302\303\304$\207"
            [org-add-hook change-major-mode-hook
             org-babel-show-result-all append local]
            5]
          org-babel-result-hide-spec org-babel-hide-all-hashes)
  org-ctrl-c-ctrl-c-hook '(org-babel-hash-at-point
               org-babel-execute-safely-maybe)
  org-cycle-hook '(org-cycle-hide-archived-subtrees org-cycle-hide-drawers
           org-cycle-hide-inline-tasks org-cycle-show-empty-lines
           org-optimize-window-after-visibility-change)
  org-confirm-elisp-link-function 'yes-or-no-p
  org-metadown-hook '(org-babel-pop-to-session-maybe)
  org-clock-out-hook '(org-clock-remove-empty-clock-drawer)
  )

Re: Bug: linum-mode + org-indent-mode cursor movement problems [8.2.10 (release_8.2.10 @ /usr/share/emacs/25.2/lisp/org/)]

[Nicolas Goaziou]

Hello,

Tom Schutter <t.schutter@comcast.net> writes:

> If both linum-mode (or nlinum-mode) and org-indent-mode are enabled,
> then moving the cursor to the previous line using <up> causes it to
> jump horizontally to the right.  The jump matches the current
> indentation.  I would expect the cursor to remain in the same column.
>
> Load linum.org (contents below) with minimal config.  linum.org will
> enable linum-mode and org-indent-mode:
>
>   emacs -Q linum.org
>
> Place your cursor on the "2" in the fourth line and press <up>.  The
> cursor will jump two columns to the right to the "4" in the third
> line. Press <up> again and the cursor will move to the "4" in the
> second line. Press <up> again and the cursor will jump back to the "e"
> in the first line.
>
> What is interesting is that you get different behavior when using
> <down>.  The cursor remains in the same column as you move down each
> line.  So starting on the "e" in the first line, pressing <down> moves
> the cursor to the "2" on the second line.
>
> If you insert a second level heading in between the first and the
> second line, then the jumps will be four columns instead of two.
>
> I discovered this problem first in nlimum-mode, but it is easier to
> reproduce using linum-mode when starting Emacs with -Q.
>
> Contents of linum.org:
>
>   * heading
>   1234 line 2
>   1234 line 3
>   1234 line 4
>   # Local Variables:
>   # eval: (org-indent-mode 1)
>   # eval: (linum-mode 1)
>   # End:

I don't think it's worth fixing: linum.el and nlinum.el are on their way
out since Emacs 26 will ship with the same feature, implemented at the
C level.

It would be nice to know, however, if there is the same problem with
that new implementation.

Regards,

-- 
Nicolas Goaziou

Re: Bug: linum-mode + org-indent-mode cursor movement problems [8.2.10 (release_8.2.10 @ /usr/share/emacs/25.2/lisp/org/)]

[Tom Schutter]

But how long will we wait for Emacs 26?

On 11/17/2017 03:30 PM, Nicolas Goaziou wrote:
> Hello,
> 
> Tom Schutter <t.schutter@comcast.net> writes:
> 
>> If both linum-mode (or nlinum-mode) and org-indent-mode are enabled,
>> then moving the cursor to the previous line using <up> causes it to
>> jump horizontally to the right.  The jump matches the current
>> indentation.  I would expect the cursor to remain in the same column.
>>
>> Load linum.org (contents below) with minimal config.  linum.org will
>> enable linum-mode and org-indent-mode:
>>
>>    emacs -Q linum.org
>>
>> Place your cursor on the "2" in the fourth line and press <up>.  The
>> cursor will jump two columns to the right to the "4" in the third
>> line. Press <up> again and the cursor will move to the "4" in the
>> second line. Press <up> again and the cursor will jump back to the "e"
>> in the first line.
>>
>> What is interesting is that you get different behavior when using
>> <down>.  The cursor remains in the same column as you move down each
>> line.  So starting on the "e" in the first line, pressing <down> moves
>> the cursor to the "2" on the second line.
>>
>> If you insert a second level heading in between the first and the
>> second line, then the jumps will be four columns instead of two.
>>
>> I discovered this problem first in nlimum-mode, but it is easier to
>> reproduce using linum-mode when starting Emacs with -Q.
>>
>> Contents of linum.org:
>>
>>    * heading
>>    1234 line 2
>>    1234 line 3
>>    1234 line 4
>>    # Local Variables:
>>    # eval: (org-indent-mode 1)
>>    # eval: (linum-mode 1)
>>    # End:
> 
> I don't think it's worth fixing: linum.el and nlinum.el are on their way
> out since Emacs 26 will ship with the same feature, implemented at the
> C level.
> 
> It would be nice to know, however, if there is the same problem with
> that new implementation.
> 
> Regards,
> 

Re: Bug: linum-mode + org-indent-mode cursor movement problems [8.2.10 (release_8.2.10 @ /usr/share/emacs/25.2/lisp/org/)]

[Nicolas Goaziou]

Hello,

Tom Schutter <t.schutter@comcast.net> writes:

> But how long will we wait for Emacs 26?

I don't know. It could be less long than waiting for someone to fix it,
though.

Anyway, I think the issue is on the Emacs C-side of code. Try playing
with

  (vertical-motion '(2.0 . -1))

and 

  (vertical-motion '(2.0 . 1))

in the buffer, for example from the "1" in "1234". They give different
results.

You may want to ask you question on Emacs Devel mailing list.

Regards,

-- 
Nicolas Goaziou                                                0x80A93738

Re: Bug: linum-mode + org-indent-mode cursor movement problems [8.2.10 (release_8.2.10 @ /usr/share/emacs/25.2/lisp/org/)]

[Kaushal Modi]

[-- Attachment #1: Type: text/plain, Size: 615 bytes --]

On Fri, Nov 17, 2017, 6:20 PM Tom Schutter <t.schutter@comcast.net> wrote:

> But how long will we wait for Emacs 26?
>

The release is "imminent" as the first pretest is already out. Adding of
new features to Emacs 26 has been stopped for a while now. So now only bug
fixes and doc improvements happen.

I have been building Emacs from emacs-26 branch pretty regularly and it's
very stable for my daily use.

Pretest download links:

For GNU/Linux systems:
ftp://alpha.gnu.org/gnu/emacs/pretest/emacs-26.0.90.tar.xz

For Windows: http://alpha.gnu.org/gnu/emacs/pretest/windows/

Try it out! :)

> --

Kaushal Modi

[-- Attachment #2: Type: text/html, Size: 1461 bytes --]

Re: Bug: linum-mode + org-indent-mode cursor movement problems [8.2.10 (release_8.2.10 @ /usr/share/emacs/25.2/lisp/org/)]

[Eric S Fraga]

[-- Attachment #1: Type: text/plain, Size: 569 bytes --]

On Friday, 17 Nov 2017 at 23:30, Nicolas Goaziou wrote:

[...]

> It would be nice to know, however, if there is the same problem with
> that new implementation.

I have been using display-line-numbers in emacs 26+ for a while now,
with org-indent-mode, and have not seen any strange behaviour along the
lines described by the OP.  There are some issues with the width of the
space for line numbers that arise when hundreds or thousands of lines
are hidden but this is not due to org.

-- 
: Eric S Fraga via Emacs 27.0.50, Org release_9.1.3-162-gde289d

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 194 bytes --]

Bug: linum-mode + org-indent-mode cursor movement problems [8.2.10 (release_8.2.10 @ /usr/share/emacs/25.2/lisp/org/)]

[Tom Schutter]

If both linum-mode (or nlinum-mode) and org-indent-mode are enabled, 
then moving the cursor to the previous line using <up> causes it to jump 
horizontally to the right.  The jump matches the current indentation.  I 
would expect the cursor to remain in the same column.

Load linum.org (contents below) with minimal config.  linum.org will 
enable linum-mode and org-indent-mode:

   emacs -Q linum.org

Place your cursor on the "2" in the fourth line and press <up>.  The 
cursor will jump two columns to the right to the "4" in the third line. 
Press <up> again and the cursor will move to the "4" in the second line. 
  Press <up> again and the cursor will jump back to the "e" in the first 
line.

What is interesting is that you get different behavior when using 
<down>.  The cursor remains in the same column as you move down each 
line.  So starting on the "e" in the first line, pressing <down> moves 
the cursor to the "2" on the second line.

If you insert a second level heading in between the first and the second 
line, then the jumps will be four columns instead of two.

I discovered this problem first in nlimum-mode, but it is easier to 
reproduce using linum-mode when starting Emacs with -Q.

Contents of linum.org:

   * heading
   1234 line 2
   1234 line 3
   1234 line 4
   # Local Variables:
   # eval: (org-indent-mode 1)
   # eval: (linum-mode 1)
   # End:


Emacs  : GNU Emacs 25.2.2 (x86_64-pc-linux-gnu, GTK+ Version 3.22.21)
  of 2017-09-22, modified by Debian
Package: Org-mode version 8.2.10 (release_8.2.10 @ 
/usr/share/emacs/25.2/lisp/org/)

current state:
==============
(setq
  org-tab-first-hook '(org-hide-block-toggle-maybe
		      org-src-native-tab-command-maybe
		      org-babel-hide-result-toggle-maybe
		      org-babel-header-arg-expand)
  org-speed-command-hook '(org-speed-command-default-hook
			  org-babel-speed-command-hook)
  org-occur-hook '(org-first-headline-recenter)
  org-metaup-hook '(org-babel-load-in-session-maybe)
  org-confirm-shell-link-function 'yes-or-no-p
  org-after-todo-state-change-hook '(org-clock-out-if-current)
  org-src-mode-hook '(org-src-babel-configure-edit-buffer
		     org-src-mode-configure-edit-buffer)
  org-agenda-before-write-hook '(org-agenda-add-entry-text)
  org-babel-pre-tangle-hook '(save-buffer)
  org-mode-hook '(#[nil "\300\301\302\303\304$\207"
		   [org-add-hook change-major-mode-hook org-show-block-all
		    append local]
		   5]
		 #[nil "\300\301\302\303\304$\207"
		   [org-add-hook change-major-mode-hook
		    org-babel-show-result-all append local]
		   5]
		 org-babel-result-hide-spec org-babel-hide-all-hashes)
  org-ctrl-c-ctrl-c-hook '(org-babel-hash-at-point
			  org-babel-execute-safely-maybe)
  org-cycle-hook '(org-cycle-hide-archived-subtrees org-cycle-hide-drawers
		  org-cycle-hide-inline-tasks org-cycle-show-empty-lines
		  org-optimize-window-after-visibility-change)
  org-confirm-elisp-link-function 'yes-or-no-p
  org-metadown-hook '(org-babel-pop-to-session-maybe)
  org-clock-out-hook '(org-clock-remove-empty-clock-drawer)
  )