* meaning of body-only in org-export-as-html @ 2012-03-16 22:33 Chris Gray 2012-03-22 14:51 ` Myles English 0 siblings, 1 reply; 8+ messages in thread From: Chris Gray @ 2012-03-16 22:33 UTC (permalink / raw) To: emacs-orgmode Hello, I am using org-export-as-html with the body-only parameter set to t in the org plugin for ikiwiki that I'm working on. It works almost perfectly, but I recently had a user point out that it's not possible to get a table of contents, even when one is explicitly asked for in the #+OPTIONS line of the org file. Since the table of contents is part of the body (at least in the sense that it is between the <body> tags), I found this surprising. So would it cause problems to change the line (if (and org-export-with-toc (not body-only)) ...) to (if org-export-with-toc ...) in org-export-as-html? Cheers, Chris ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: meaning of body-only in org-export-as-html 2012-03-16 22:33 meaning of body-only in org-export-as-html Chris Gray @ 2012-03-22 14:51 ` Myles English 2012-03-31 22:47 ` [patch] " Chris Gray 0 siblings, 1 reply; 8+ messages in thread From: Myles English @ 2012-03-22 14:51 UTC (permalink / raw) To: Chris Gray; +Cc: emacs-orgmode Mode Hi Chris, >> On Fri, 16 Mar 2012 16:33:22 -0600, Chris Gray said: > Hello, I am using org-export-as-html with the body-only parameter > set to t in the org plugin for ikiwiki that I'm working on. It > works almost perfectly, but I recently had a user point out that > it's not possible to get a table of contents, even when one is > explicitly asked for in the #+OPTIONS line of the org file. > Since the table of contents is part of the body (at least in the > sense that it is between the <body> tags), I found this surprising. > So would it cause problems to change the line > (if (and org-export-with-toc (not body-only)) ...) > to > (if org-export-with-toc ...) > in org-export-as-html? I see one problem in that it would be then be inconsistent with org-export-as-ascii which considers the TOC to be part of the header. I would like to be able to export just the TOC (as ascii, and I understand a new ascii exporter has been written lately). The same thing for the html exporter would presumably solve your problem too because then you could export TOC+body (as html)? > Cheers, Chris Myles ^ permalink raw reply [flat|nested] 8+ messages in thread
* [patch] Re: meaning of body-only in org-export-as-html 2012-03-22 14:51 ` Myles English @ 2012-03-31 22:47 ` Chris Gray 2012-04-02 8:07 ` Bastien 0 siblings, 1 reply; 8+ messages in thread From: Chris Gray @ 2012-03-31 22:47 UTC (permalink / raw) To: Myles English; +Cc: emacs-orgmode Mode [-- Attachment #1: Type: text/plain, Size: 1718 bytes --] Hi Myles, Sorry I missed your email for so long. On Thu, 22 Mar 2012 14:51:29 +0000, Myles English <mylesenglish@gmail.com> wrote: > > Hi Chris, > > >> On Fri, 16 Mar 2012 16:33:22 -0600, Chris Gray said: > > > Hello, I am using org-export-as-html with the body-only parameter > > set to t in the org plugin for ikiwiki that I'm working on. It > > works almost perfectly, but I recently had a user point out that > > it's not possible to get a table of contents, even when one is > > explicitly asked for in the #+OPTIONS line of the org file. > > > Since the table of contents is part of the body (at least in the > > sense that it is between the <body> tags), I found this surprising. > > So would it cause problems to change the line > > > (if (and org-export-with-toc (not body-only)) ...) > > > to > > > (if org-export-with-toc ...) > > > in org-export-as-html? > > I see one problem in that it would be then be inconsistent with > org-export-as-ascii which considers the TOC to be part of the header. I > would like to be able to export just the TOC (as ascii, and I understand > a new ascii exporter has been written lately). The same thing for the > html exporter would presumably solve your problem too because then you > could export TOC+body (as html)? The thing is, the docstring is not consistent with the code. It would make my life easier if the code was changed to match the docstring, but I would also be okay if the opposite happened. I am also looking forward to the new exporter being ready, but I guess this small issue should be fixed in the current exporter until it is. I have attached the patch that I suggested for the HTML exporter. Cheers, Chris [-- Warning: decoded text below may be mangled, UTF-8 assumed --] [-- Attachment #2: 0001-Bring-the-meaning-of-body-only-in-org-export-as-html.patch --] [-- Type: text/x-diff, Size: 1200 bytes --] From 9f91361e8c8cd7047acf0260bff2ae81e72fcc93 Mon Sep 17 00:00:00 2001 From: Chris Gray <chrismgray@gmail.com> Date: Sat, 31 Mar 2012 16:35:04 -0600 Subject: [PATCH] Bring the meaning of body-only in org-export-as-html closer to docs The docstring for org-export-as-html says "When BODY-ONLY is set, don't produce the file header and footer, simply return the content of <body>...</body>, without even the body tags themselves." However, it currently also inhibits the generation of the table of contents, regardless if one is asked for by the user in the #+OPTIONS line of the file. This patch fixes that (i.e. allows for toc generation if it is requested). --- lisp/org-html.el | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/lisp/org-html.el b/lisp/org-html.el index 2de2ea9..cb785f3 100644 --- a/lisp/org-html.el +++ b/lisp/org-html.el @@ -1402,7 +1402,7 @@ PUB-DIR is set, use this as the publishing directory." "\n<h1 class=\"title\">" title "</h1>\n")) ;; insert body - (if (and org-export-with-toc (not body-only)) + (if org-export-with-toc (progn (push (format "<h%d>%s</h%d>\n" org-export-html-toplevel-hlevel -- 1.7.9 ^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: [patch] Re: meaning of body-only in org-export-as-html 2012-03-31 22:47 ` [patch] " Chris Gray @ 2012-04-02 8:07 ` Bastien 2012-04-03 16:40 ` Chris Gray 0 siblings, 1 reply; 8+ messages in thread From: Bastien @ 2012-04-02 8:07 UTC (permalink / raw) To: Chris Gray; +Cc: Myles English, emacs-orgmode Hi Chris, Chris Gray <chrismgray@gmail.com> writes: >> I see one problem in that it would be then be inconsistent with >> org-export-as-ascii which considers the TOC to be part of the header. I >> would like to be able to export just the TOC (as ascii, and I understand >> a new ascii exporter has been written lately). The same thing for the >> html exporter would presumably solve your problem too because then you >> could export TOC+body (as html)? > > The thing is, the docstring is not consistent with the code. It would > make my life easier if the code was changed to match the docstring, but > I would also be okay if the opposite happened. > > I am also looking forward to the new exporter being ready, but I guess > this small issue should be fixed in the current exporter until it is. > > I have attached the patch that I suggested for the HTML exporter. I'm ready to apply this patch, but can you add a proper Emacs ChangeLog? Thanks, -- Bastien ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [patch] Re: meaning of body-only in org-export-as-html 2012-04-02 8:07 ` Bastien @ 2012-04-03 16:40 ` Chris Gray 2012-04-03 18:12 ` Bastien 2012-04-04 7:06 ` Bastien 0 siblings, 2 replies; 8+ messages in thread From: Chris Gray @ 2012-04-03 16:40 UTC (permalink / raw) To: Bastien; +Cc: emacs-orgmode [-- Attachment #1: Type: text/plain, Size: 360 bytes --] Bastien <bzg@gnu.org> writes: > I'm ready to apply this patch, but can you add a proper Emacs > ChangeLog? Updated patch attached. By the way, I am in the "Processing" section in the list of people who have signed papers on Worg. However, I received confirmation that my papers went through a long time ago. Should I correct Worg on this? Cheers, Chris [-- Warning: decoded text below may be mangled, UTF-8 assumed --] [-- Attachment #2: 0001-Export-Allow-for-TOC-generation-if-body-only-is-set.patch --] [-- Type: text/x-diff, Size: 1130 bytes --] From 3ae7de6bd5b91ce18ed38dfce46466d6dd3a64b7 Mon Sep 17 00:00:00 2001 From: Chris Gray <chrismgray@gmail.com> Date: Tue, 3 Apr 2012 10:32:56 -0600 Subject: [PATCH] Export: Allow for TOC generation if body-only is set * lisp/org-html.el (org-export-as-html): Remove the check for body-only in the code for generating tables of contents. The docstring for org-export-as-html states that the body-only flag removes everything outside the <body></body> tags (inclusive). Since the table of contents is inside these tags, it should be exported when requested even if the body-only flag is set. --- lisp/org-html.el | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/lisp/org-html.el b/lisp/org-html.el index be2124b..385d8ec 100644 --- a/lisp/org-html.el +++ b/lisp/org-html.el @@ -1414,7 +1414,7 @@ PUB-DIR is set, use this as the publishing directory." "\n<h1 class=\"title\">" title "</h1>\n")) ;; insert body - (if (and org-export-with-toc (not body-only)) + (if org-export-with-toc (progn (push (format "<h%d>%s</h%d>\n" org-export-html-toplevel-hlevel -- 1.7.9 ^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: [patch] Re: meaning of body-only in org-export-as-html 2012-04-03 16:40 ` Chris Gray @ 2012-04-03 18:12 ` Bastien 2012-04-04 7:06 ` Bastien 1 sibling, 0 replies; 8+ messages in thread From: Bastien @ 2012-04-03 18:12 UTC (permalink / raw) To: Chris Gray; +Cc: emacs-orgmode Chris Gray <chrismgray@gmail.com> writes: > Bastien <bzg@gnu.org> writes: >> I'm ready to apply this patch, but can you add a proper Emacs >> ChangeLog? > > Updated patch attached. Thanks, I will review it. > By the way, I am in the "Processing" section in the list of people who > have signed papers on Worg. However, I received confirmation that my > papers went through a long time ago. Should I correct Worg on this? Yes, please go ahead! Thanks, -- Bastien ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [patch] Re: meaning of body-only in org-export-as-html 2012-04-03 16:40 ` Chris Gray 2012-04-03 18:12 ` Bastien @ 2012-04-04 7:06 ` Bastien 2012-04-04 18:24 ` Chris Gray 1 sibling, 1 reply; 8+ messages in thread From: Bastien @ 2012-04-04 7:06 UTC (permalink / raw) To: Chris Gray; +Cc: emacs-orgmode Hi Chris, Chris Gray <chrismgray@gmail.com> writes: > Bastien <bzg@gnu.org> writes: >> I'm ready to apply this patch, but can you add a proper Emacs >> ChangeLog? > > Updated patch attached. Applied, thanks for the effort in formatting/documenting it. > By the way, I am in the "Processing" section in the list of people who > have signed papers on Worg. However, I received confirmation that my > papers went through a long time ago. Should I correct Worg on this? Let me know when this is done. Best, -- Bastien ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [patch] Re: meaning of body-only in org-export-as-html 2012-04-04 7:06 ` Bastien @ 2012-04-04 18:24 ` Chris Gray 0 siblings, 0 replies; 8+ messages in thread From: Chris Gray @ 2012-04-04 18:24 UTC (permalink / raw) To: Bastien; +Cc: emacs-orgmode Bastien <bzg@gnu.org> writes: >> By the way, I am in the "Processing" section in the list of people who >> have signed papers on Worg. However, I received confirmation that my >> papers went through a long time ago. Should I correct Worg on this? > > Let me know when this is done. I did this yesterday. It turned out that I was listed in two places: once with my full name and once with the short name that I go by. I just removed my short name from the list. Cheers, Chris ^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2012-04-04 18:24 UTC | newest] Thread overview: 8+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2012-03-16 22:33 meaning of body-only in org-export-as-html Chris Gray 2012-03-22 14:51 ` Myles English 2012-03-31 22:47 ` [patch] " Chris Gray 2012-04-02 8:07 ` Bastien 2012-04-03 16:40 ` Chris Gray 2012-04-03 18:12 ` Bastien 2012-04-04 7:06 ` Bastien 2012-04-04 18:24 ` Chris Gray
Code repositories for project(s) associated with this public inbox https://git.savannah.gnu.org/cgit/emacs/org-mode.git This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).