emacs-orgmode@gnu.org archives
 help / color / mirror / code / Atom feed

* Debugging the publishing process?
@ 2008-10-21 10:54 Ángel de Vicente
  2008-10-21 12:20 ` Bernt Hansen
  0 siblings, 1 reply; 4+ messages in thread
From: Ángel de Vicente @ 2008-10-21 10:54 UTC (permalink / raw)
  To: emacs-orgmode

Hi,

I wonder if anyone can give me a tip... I'm just trying to figure out the  
publishing process in Org-mode, but I'm not getting any results.. is there  
a way to debug what ORG-MODE is trying to do?

I started with a basic setting, and defined a minimal (but I think valid)  
org-publish-project-alist as:

(setq org-publish-project-alist
       '(("OWD"
	 :base-directory "~/org/"
	 :publishing-directory "~/OWD")))

In ~/org I have a number of .org files that get properly exported to HTML  
with C-c C-e h

but if I try to publish them with C-c C-e A, nothing appear in ~/OWD, and  
have no clue where it went wrong.

By the way, I have version 6.04c installed (although the info manual says  
it is 6.09a) (I just installed from the download link at  
http://orgmode.org/index.html#sec-4)

Thanks a lot,
Ángel de Vicente
-- 
----------------------------------
http://www.iac.es/galeria/angelv/

High Performance Computing Support PostDoc
Instituto de Astrofísica de Canarias

^ permalink raw reply	[flat|nested] 4+ messages in thread

• * Re: Debugging the publishing process?
    2008-10-21 10:54 Debugging the publishing process? Ángel de Vicente
  @ 2008-10-21 12:20 ` Bernt Hansen
    2008-10-21 14:23   ` Sebastian Rose
    2008-10-22  7:11   ` Ángel de Vicente
    0 siblings, 2 replies; 4+ messages in thread
  From: Bernt Hansen @ 2008-10-21 12:20 UTC (permalink / raw)
    To: Ángel de Vicente; +Cc: emacs-orgmode
  
  Ángel de Vicente <angelv@iac.es> writes:
  
  > I wonder if anyone can give me a tip... I'm just trying to figure out
  > the  publishing process in Org-mode, but I'm not getting any
  > results.. is there  a way to debug what ORG-MODE is trying to do?
  >
  > I started with a basic setting, and defined a minimal (but I think
  > valid)  org-publish-project-alist as:
  >
  > (setq org-publish-project-alist
  >       '(("OWD"
  > 	 :base-directory "~/org/"
  > 	 :publishing-directory "~/OWD")))
  >
  > In ~/org I have a number of .org files that get properly exported to
  > HTML  with C-c C-e h
  >
  > but if I try to publish them with C-c C-e A, nothing appear in ~/OWD,
  > and  have no clue where it went wrong.
  >
  > By the way, I have version 6.04c installed (although the info manual
  > says  it is 6.09a) (I just installed from the download link at
  > http://orgmode.org/index.html#sec-4)
  
  This works fine for me in 6.09a (as reported by M-x org-version)
  
  ,----[ minimal.emacs ]
  | (global-font-lock-mode t)
  | 
  | (add-hook 'org-mode-hook '(lambda () (flyspell-mode 1)))
  | 
  | (add-to-list 'load-path (expand-file-name "~/git/org-mode/lisp"))
  | (add-to-list 'auto-mode-alist '("\\.org$" . org-mode))
  | (require 'org-install)
  | 
  | (define-key global-map "\C-cl" 'org-store-link)
  | (define-key global-map "\C-ca" 'org-agenda)
  | 
  | (setq org-publish-project-alist
  |       '(("OWD"
  | 	 :base-directory "/tmp/org/"
  | 	 :publishing-directory "/tmp/OWD")))
  `----
  
  I created /tmp/org and /tmp/OWD and then 
  
  emacs -q -l minimal.emacs
  
  created /tmp/org/test.org and C-c C-e A creates /tmp/OWD/test.html
  
  ,----[ test.org ]
  | * First file
  | Data for the first topic goes here
  | #+BEGIN_EXAMPLE
  | an example
  | #+END_EXAMPLE
  | This is after the example.
  | * Export me
  | here is some data
  | 
  | More stuff
  `----
  
  ,----[ test2.org ]
  | * Another file
  | * with stuff
  | Whee it works fine.
  `----
  
  The publishing process normally writes details to the message window (if
  you click in the message window it open the *Messages* buffer so you can
  scroll through the messages.)
  
  ,----[ *Messages* ]
  | Exporting... [2 times]
  | Wrote /tmp/OWD/test2.html
  | Exporting... done
  | Publishing file /tmp/org/test.org
  | Exporting... [3 times]
  | Wrote /tmp/OWD/test.html
  | Exporting... done
  `----
  
  If I do it a second time without touching the files I get 
  
  ,----
  | Skipping unmodified file /tmp/org/test2.org
  | Skipping unmodified file /tmp/org/test.org
  `----
  
  I'm sure there have been lots of changes since 6.04c that affect
  publishing so I would recommend upgrading to the most recent version of
  org-mode first and trying again.
  
  Regards,
  Bernt
  
  ^ permalink raw reply	[flat|nested] 4+ messages in thread

• • * Re: Re: Debugging the publishing process?
      2008-10-21 12:20 ` Bernt Hansen
    @ 2008-10-21 14:23   ` Sebastian Rose
      2008-10-22  7:11   ` Ángel de Vicente
      1 sibling, 0 replies; 4+ messages in thread
    From: Sebastian Rose @ 2008-10-21 14:23 UTC (permalink / raw)
      To: emacs-orgmode
    
    There where some more options required in setq org-publish-project-alist
    I believe.
    
    Try to add
    
    :base-extension "org"
    :publishing-function org-publish-org-to-html
    
    and maybe some other as described in the manual
    http://orgmode.org/manual/Sources-and-destinations.html#Sources-and-destinations
    ff.
    
    Regards,
    
       Sebastian
    
    Bernt Hansen wrote:
    > Ángel de Vicente <angelv@iac.es> writes:
    > 
    >> I wonder if anyone can give me a tip... I'm just trying to figure out
    >> the  publishing process in Org-mode, but I'm not getting any
    >> results.. is there  a way to debug what ORG-MODE is trying to do?
    >>
    >> I started with a basic setting, and defined a minimal (but I think
    >> valid)  org-publish-project-alist as:
    >>
    >> (setq org-publish-project-alist
    >>       '(("OWD"
    >> 	 :base-directory "~/org/"
    >> 	 :publishing-directory "~/OWD")))
    >>
    >> In ~/org I have a number of .org files that get properly exported to
    >> HTML  with C-c C-e h
    >>
    >> but if I try to publish them with C-c C-e A, nothing appear in ~/OWD,
    >> and  have no clue where it went wrong.
    >>
    >> By the way, I have version 6.04c installed (although the info manual
    >> says  it is 6.09a) (I just installed from the download link at
    >> http://orgmode.org/index.html#sec-4)
    > 
    > This works fine for me in 6.09a (as reported by M-x org-version)
    > 
    > ,----[ minimal.emacs ]
    > | (global-font-lock-mode t)
    > | 
    > | (add-hook 'org-mode-hook '(lambda () (flyspell-mode 1)))
    > | 
    > | (add-to-list 'load-path (expand-file-name "~/git/org-mode/lisp"))
    > | (add-to-list 'auto-mode-alist '("\\.org$" . org-mode))
    > | (require 'org-install)
    > | 
    > | (define-key global-map "\C-cl" 'org-store-link)
    > | (define-key global-map "\C-ca" 'org-agenda)
    > | 
    > | (setq org-publish-project-alist
    > |       '(("OWD"
    > | 	 :base-directory "/tmp/org/"
    > | 	 :publishing-directory "/tmp/OWD")))
    > `----
    > 
    > I created /tmp/org and /tmp/OWD and then 
    > 
    > emacs -q -l minimal.emacs
    > 
    > created /tmp/org/test.org and C-c C-e A creates /tmp/OWD/test.html
    > 
    > ,----[ test.org ]
    > | * First file
    > | Data for the first topic goes here
    > | #+BEGIN_EXAMPLE
    > | an example
    > | #+END_EXAMPLE
    > | This is after the example.
    > | * Export me
    > | here is some data
    > | 
    > | More stuff
    > `----
    > 
    > ,----[ test2.org ]
    > | * Another file
    > | * with stuff
    > | Whee it works fine.
    > `----
    > 
    > The publishing process normally writes details to the message window (if
    > you click in the message window it open the *Messages* buffer so you can
    > scroll through the messages.)
    > 
    > ,----[ *Messages* ]
    > | Exporting... [2 times]
    > | Wrote /tmp/OWD/test2.html
    > | Exporting... done
    > | Publishing file /tmp/org/test.org
    > | Exporting... [3 times]
    > | Wrote /tmp/OWD/test.html
    > | Exporting... done
    > `----
    > 
    > If I do it a second time without touching the files I get 
    > 
    > ,----
    > | Skipping unmodified file /tmp/org/test2.org
    > | Skipping unmodified file /tmp/org/test.org
    > `----
    > 
    > I'm sure there have been lots of changes since 6.04c that affect
    > publishing so I would recommend upgrading to the most recent version of
    > org-mode first and trying again.
    > 
    > Regards,
    > Bernt
    > 
    > 
    > _______________________________________________
    > Emacs-orgmode mailing list
    > Remember: use `Reply All' to send replies to the list.
    > Emacs-orgmode@gnu.org
    > http://lists.gnu.org/mailman/listinfo/emacs-orgmode
    > 
    
    ^ permalink raw reply	[flat|nested] 4+ messages in thread

  • * Re: Debugging the publishing process?
      2008-10-21 12:20 ` Bernt Hansen
      2008-10-21 14:23   ` Sebastian Rose
    @ 2008-10-22  7:11   ` Ángel de Vicente
      1 sibling, 0 replies; 4+ messages in thread
    From: Ángel de Vicente @ 2008-10-22  7:11 UTC (permalink / raw)
      To: Bernt Hansen; +Cc: emacs-orgmode
    
    Hi,
    
    thanks Bernt (and Sebastian) for the help with this. In the end it turned  
    out that I had two places with the ORG files and apparently it was getting  
    quite confused with both. Getting rid of one of them and just leaving the  
    6.09a one did the trick. (I hadn't touched this computer for a bit more  
    than two months, so one forgets what is installed... :)
    
    Thanks a lot,
    Ángel de Vicente
    
    En Tue, 21 Oct 2008 13:20:06 +0100, Bernt Hansen <bernt@norang.ca>  
    escribió:
    
    > Ángel de Vicente <angelv@iac.es> writes:
    >
    >> I wonder if anyone can give me a tip... I'm just trying to figure out
    >> the  publishing process in Org-mode, but I'm not getting any
    >> results.. is there  a way to debug what ORG-MODE is trying to do?
    >>
    >> I started with a basic setting, and defined a minimal (but I think
    >> valid)  org-publish-project-alist as:
    >>
    >> (setq org-publish-project-alist
    >>       '(("OWD"
    >> 	 :base-directory "~/org/"
    >> 	 :publishing-directory "~/OWD")))
    >>
    >> In ~/org I have a number of .org files that get properly exported to
    >> HTML  with C-c C-e h
    >>
    >> but if I try to publish them with C-c C-e A, nothing appear in ~/OWD,
    >> and  have no clue where it went wrong.
    >>
    >> By the way, I have version 6.04c installed (although the info manual
    >> says  it is 6.09a) (I just installed from the download link at
    >> http://orgmode.org/index.html#sec-4)
    >
    > This works fine for me in 6.09a (as reported by M-x org-version)
    >
    > ,----[ minimal.emacs ]
    > | (global-font-lock-mode t)
    > |
    > | (add-hook 'org-mode-hook '(lambda () (flyspell-mode 1)))
    > |
    > | (add-to-list 'load-path (expand-file-name "~/git/org-mode/lisp"))
    > | (add-to-list 'auto-mode-alist '("\\.org$" . org-mode))
    > | (require 'org-install)
    > |
    > | (define-key global-map "\C-cl" 'org-store-link)
    > | (define-key global-map "\C-ca" 'org-agenda)
    > |
    > | (setq org-publish-project-alist
    > |       '(("OWD"
    > | 	 :base-directory "/tmp/org/"
    > | 	 :publishing-directory "/tmp/OWD")))
    > `----
    >
    > I created /tmp/org and /tmp/OWD and then
    >
    > emacs -q -l minimal.emacs
    >
    > created /tmp/org/test.org and C-c C-e A creates /tmp/OWD/test.html
    >
    > ,----[ test.org ]
    > | * First file
    > | Data for the first topic goes here
    > | #+BEGIN_EXAMPLE
    > | an example
    > | #+END_EXAMPLE
    > | This is after the example.
    > | * Export me
    > | here is some data
    > |
    > | More stuff
    > `----
    >
    > ,----[ test2.org ]
    > | * Another file
    > | * with stuff
    > | Whee it works fine.
    > `----
    >
    > The publishing process normally writes details to the message window (if
    > you click in the message window it open the *Messages* buffer so you can
    > scroll through the messages.)
    >
    > ,----[ *Messages* ]
    > | Exporting... [2 times]
    > | Wrote /tmp/OWD/test2.html
    > | Exporting... done
    > | Publishing file /tmp/org/test.org
    > | Exporting... [3 times]
    > | Wrote /tmp/OWD/test.html
    > | Exporting... done
    > `----
    >
    > If I do it a second time without touching the files I get
    >
    > ,----
    > | Skipping unmodified file /tmp/org/test2.org
    > | Skipping unmodified file /tmp/org/test.org
    > `----
    >
    > I'm sure there have been lots of changes since 6.04c that affect
    > publishing so I would recommend upgrading to the most recent version of
    > org-mode first and trying again.
    >
    > Regards,
    > Bernt
    
    
    
    -- 
    ----------------------------------
    http://www.iac.es/galeria/angelv/
    
    High Performance Computing Support PostDoc
    Instituto de Astrofísica de Canarias
    
    ^ permalink raw reply	[flat|nested] 4+ messages in thread

end of thread, other threads:[~2008-10-22  7:13 UTC | newest]

Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2008-10-21 10:54 Debugging the publishing process? Ángel de Vicente
2008-10-21 12:20 ` Bernt Hansen
2008-10-21 14:23   ` Sebastian Rose
2008-10-22  7:11   ` Ángel de Vicente

Code repositories for project(s) associated with this public inbox

	https://git.savannah.gnu.org/cgit/emacs/org-mode.git

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).