* Specifying ATTR_LATEX document wide?
@ 2015-06-02 10:17 Rainer M Krug
2015-06-02 11:12 ` Suvayu Ali
2015-06-02 13:49 ` Nicolas Goaziou
0 siblings, 2 replies; 8+ messages in thread
From: Rainer M Krug @ 2015-06-02 10:17 UTC (permalink / raw)
To: emacs-orgmode
[-- Attachment #1: Type: text/plain, Size: 1326 bytes --]
Hi
In one document, I would like to make two changes how images are
inserted in LaTeX / pdf documents, namely:
1) have no re-sizing, i.e.
,----
| \includegraphics[]{./output/fig_crossValidationDefaultByUA.pdf}
`----
instead of
,----
| \includegraphics[width=.9\linewidth]{./output/fig_crossValidationDefaultByUA.pdf}
`----
and
2) have no floats, even if a caption is given or use the :placement [H]
with the float package.
According to
[[info:org#LaTeX%20specific%20attributes][info:org#LaTeX specific attributes]]
I can use
#+ATTR_LATEX: :float nil
or
#+ATTR_LATEX: :placement [H]
for (2), but I have no idea how I can do (1).
Additionally:
Is there a way of setting this globally fir the actual document
(document header?), so that I don't have to add this line to all my
hundred images (OK - only about 70 - but still to many)?
Thanks,
Rainer
--
Rainer M. Krug, PhD (Conservation Ecology, SUN), MSc (Conservation Biology, UCT), Dipl. Phys. (Germany)
Centre of Excellence for Invasion Biology
Stellenbosch University
South Africa
Tel : +33 - (0)9 53 10 27 44
Cell: +33 - (0)6 85 62 59 98
Fax : +33 - (0)9 58 10 27 44
Fax (D): +49 - (0)3 21 21 25 22 44
email: Rainer@krugs.de
Skype: RMkrug
PGP: 0x0F52F982
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 494 bytes --]
^ permalink raw reply [flat|nested] 8+ messages in thread* Re: Specifying ATTR_LATEX document wide?
2015-06-02 10:17 Specifying ATTR_LATEX document wide? Rainer M Krug
@ 2015-06-02 11:12 ` Suvayu Ali
2015-06-02 13:49 ` Nicolas Goaziou
1 sibling, 0 replies; 8+ messages in thread
From: Suvayu Ali @ 2015-06-02 11:12 UTC (permalink / raw)
To: emacs-orgmode
On Tue, Jun 02, 2015 at 12:17:04PM +0200, Rainer M Krug wrote:
>
> Hi
>
> In one document, I would like to make two changes how images are
> inserted in LaTeX / pdf documents, namely:
>
> 1) have no re-sizing, i.e.
>
> ,----
> | \includegraphics[]{./output/fig_crossValidationDefaultByUA.pdf}
> `----
Does the following work equivalently for you?
#+attr_LaTeX: :width \linewidth
> Is there a way of setting this globally fir the actual document
> (document header?), so that I don't have to add this line to all my
> hundred images (OK - only about 70 - but still to many)?
Maybe use babel blocks for this? Input files from a list or table, echo
them back with a common #+attr_latex line?
Hope this helps,
--
Suvayu
Open source is the future. It sets us free.
^ permalink raw reply [flat|nested] 8+ messages in thread* Re: Specifying ATTR_LATEX document wide?
2015-06-02 10:17 Specifying ATTR_LATEX document wide? Rainer M Krug
2015-06-02 11:12 ` Suvayu Ali
@ 2015-06-02 13:49 ` Nicolas Goaziou
2015-06-03 8:10 ` Rainer M Krug
1 sibling, 1 reply; 8+ messages in thread
From: Nicolas Goaziou @ 2015-06-02 13:49 UTC (permalink / raw)
To: Rainer M Krug; +Cc: emacs-orgmode
Hello,
Rainer M Krug <Rainer@krugs.de> writes:
> In one document, I would like to make two changes how images are
> inserted in LaTeX / pdf documents, namely:
>
> 1) have no re-sizing, i.e.
>
> ,----
> | \includegraphics[]{./output/fig_crossValidationDefaultByUA.pdf}
> `----
>
> instead of
>
> ,----
> | \includegraphics[width=.9\linewidth]{./output/fig_crossValidationDefaultByUA.pdf}
> `----
#+BIND: org-latex-image-default-width ""
> and
>
> 2) have no floats, even if a caption is given or use the :placement [H]
> with the float package.
>
> According to
> [[info:org#LaTeX%20specific%20attributes][info:org#LaTeX specific attributes]]
> I can use
>
> #+ATTR_LATEX: :float nil
>
> or
>
> #+ATTR_LATEX: :placement [H]
#+BIND: org-latex-default-figure-position "H"
Of course, this assumes, `org-export-allow-bind-keywords' is non-nil.
Regards,
--
Nicolas Goaziou
^ permalink raw reply [flat|nested] 8+ messages in thread* Re: Specifying ATTR_LATEX document wide?
2015-06-02 13:49 ` Nicolas Goaziou
@ 2015-06-03 8:10 ` Rainer M Krug
2015-06-09 7:24 ` Nicolas Goaziou
0 siblings, 1 reply; 8+ messages in thread
From: Rainer M Krug @ 2015-06-03 8:10 UTC (permalink / raw)
To: emacs-orgmode
[-- Attachment #1: Type: text/plain, Size: 1584 bytes --]
Nicolas Goaziou <mail@nicolasgoaziou.fr> writes:
> Hello,
>
> Rainer M Krug <Rainer@krugs.de> writes:
>
>> In one document, I would like to make two changes how images are
>> inserted in LaTeX / pdf documents, namely:
>>
>> 1) have no re-sizing, i.e.
>>
>> ,----
>> | \includegraphics[]{./output/fig_crossValidationDefaultByUA.pdf}
>> `----
>>
>> instead of
>>
>> ,----
>> | \includegraphics[width=.9\linewidth]{./output/fig_crossValidationDefaultByUA.pdf}
>> `----
>
> #+BIND: org-latex-image-default-width ""
>
>> and
>>
>> 2) have no floats, even if a caption is given or use the :placement [H]
>> with the float package.
>>
>> According to
>> [[info:org#LaTeX%20specific%20attributes][info:org#LaTeX specific attributes]]
>> I can use
>>
>> #+ATTR_LATEX: :float nil
>>
>> or
>>
>> #+ATTR_LATEX: :placement [H]
>
> #+BIND: org-latex-default-figure-position "H"
>
> Of course, this assumes, `org-export-allow-bind-keywords' is non-nil.
>
Thanks - perfectly.
But I assume, I could also set them via file local variables, which I
did with `org-export-allow-bind-keywords'.
Thanks,
Rainer
>
> Regards,
--
Rainer M. Krug, PhD (Conservation Ecology, SUN), MSc (Conservation Biology, UCT), Dipl. Phys. (Germany)
Centre of Excellence for Invasion Biology
Stellenbosch University
South Africa
Tel : +33 - (0)9 53 10 27 44
Cell: +33 - (0)6 85 62 59 98
Fax : +33 - (0)9 58 10 27 44
Fax (D): +49 - (0)3 21 21 25 22 44
email: Rainer@krugs.de
Skype: RMkrug
PGP: 0x0F52F982
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 494 bytes --]
^ permalink raw reply [flat|nested] 8+ messages in thread* Re: Specifying ATTR_LATEX document wide?
2015-06-03 8:10 ` Rainer M Krug
@ 2015-06-09 7:24 ` Nicolas Goaziou
2015-06-09 7:53 ` Rainer M Krug
0 siblings, 1 reply; 8+ messages in thread
From: Nicolas Goaziou @ 2015-06-09 7:24 UTC (permalink / raw)
To: Rainer M Krug; +Cc: emacs-orgmode
Rainer M Krug <Rainer@krugs.de> writes:
> But I assume, I could also set them via file local variables, which I
> did with `org-export-allow-bind-keywords'.
I don't think there's any guarantee that all local file keywords
definitions are observed during export (e.g., most of the export process
happens in temporary buffers), hence #+BIND keywords.
Regards,
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Specifying ATTR_LATEX document wide?
2015-06-09 7:24 ` Nicolas Goaziou
@ 2015-06-09 7:53 ` Rainer M Krug
2015-06-15 19:57 ` Nicolas Goaziou
0 siblings, 1 reply; 8+ messages in thread
From: Rainer M Krug @ 2015-06-09 7:53 UTC (permalink / raw)
To: emacs-orgmode
[-- Attachment #1: Type: text/plain, Size: 1055 bytes --]
Nicolas Goaziou <mail@nicolasgoaziou.fr> writes:
> Rainer M Krug <Rainer@krugs.de> writes:
>
>> But I assume, I could also set them via file local variables, which I
>> did with `org-export-allow-bind-keywords'.
>
> I don't think there's any guarantee that all local file keywords
> definitions are observed during export (e.g., most of the export process
> happens in temporary buffers), hence #+BIND keywords.
Thanks for the clarification. Is there a technical or security reason
for this? because especially for export, file local variables would make
sense to avoid the #+BIND keywords?
Rainer
>
> Regards,
--
Rainer M. Krug, PhD (Conservation Ecology, SUN), MSc (Conservation Biology, UCT), Dipl. Phys. (Germany)
Centre of Excellence for Invasion Biology
Stellenbosch University
South Africa
Tel : +33 - (0)9 53 10 27 44
Cell: +33 - (0)6 85 62 59 98
Fax : +33 - (0)9 58 10 27 44
Fax (D): +49 - (0)3 21 21 25 22 44
email: Rainer@krugs.de
Skype: RMkrug
PGP: 0x0F52F982
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 494 bytes --]
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Specifying ATTR_LATEX document wide?
2015-06-09 7:53 ` Rainer M Krug
@ 2015-06-15 19:57 ` Nicolas Goaziou
2015-06-16 10:28 ` Rainer M Krug
0 siblings, 1 reply; 8+ messages in thread
From: Nicolas Goaziou @ 2015-06-15 19:57 UTC (permalink / raw)
To: Rainer M Krug; +Cc: emacs-orgmode
Rainer M Krug <Rainer@krugs.de> writes:
> Thanks for the clarification. Is there a technical or security reason
> for this? because especially for export, file local variables would make
> sense to avoid the #+BIND keywords?
ISTR there is a technical reason for this. Under some circumstances,
local variables are not activated during export. I cannot remember which
ones, unfortunately.
Also, unlike to local variables, BIND keywords can be set through
SETUPFILE keywords.
Regards,
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Specifying ATTR_LATEX document wide?
2015-06-15 19:57 ` Nicolas Goaziou
@ 2015-06-16 10:28 ` Rainer M Krug
0 siblings, 0 replies; 8+ messages in thread
From: Rainer M Krug @ 2015-06-16 10:28 UTC (permalink / raw)
To: emacs-orgmode
[-- Attachment #1: Type: text/plain, Size: 1104 bytes --]
Nicolas Goaziou <mail@nicolasgoaziou.fr> writes:
> Rainer M Krug <Rainer@krugs.de> writes:
>
>> Thanks for the clarification. Is there a technical or security reason
>> for this? because especially for export, file local variables would make
>> sense to avoid the #+BIND keywords?
>
> ISTR there is a technical reason for this. Under some circumstances,
> local variables are not activated during export. I cannot remember which
> ones, unfortunately.
>
Thanks for the info.
> Also, unlike to local variables, BIND keywords can be set through
> SETUPFILE keywords.
Oh the SETUPFILE - have never thought about that one.
Thanks,
Rainer
>
>
> Regards,
--
Rainer M. Krug, PhD (Conservation Ecology, SUN), MSc (Conservation Biology, UCT), Dipl. Phys. (Germany)
Centre of Excellence for Invasion Biology
Stellenbosch University
South Africa
Tel : +33 - (0)9 53 10 27 44
Cell: +33 - (0)6 85 62 59 98
Fax : +33 - (0)9 58 10 27 44
Fax (D): +49 - (0)3 21 21 25 22 44
email: Rainer@krugs.de
Skype: RMkrug
PGP: 0x0F52F982
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 480 bytes --]
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2015-06-16 10:28 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-06-02 10:17 Specifying ATTR_LATEX document wide? Rainer M Krug
2015-06-02 11:12 ` Suvayu Ali
2015-06-02 13:49 ` Nicolas Goaziou
2015-06-03 8:10 ` Rainer M Krug
2015-06-09 7:24 ` Nicolas Goaziou
2015-06-09 7:53 ` Rainer M Krug
2015-06-15 19:57 ` Nicolas Goaziou
2015-06-16 10:28 ` Rainer M Krug
Code repositories for project(s) associated with this public inbox
https://git.savannah.gnu.org/cgit/emacs/org-mode.git
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).