* Bug in table formula editor?
@ 2009-11-22 3:15 andrea
2009-11-22 5:56 ` Carsten Dominik
0 siblings, 1 reply; 7+ messages in thread
From: andrea @ 2009-11-22 3:15 UTC (permalink / raw)
To: emacs-orgmode
Hi everyone, I noticed a problem which on my configuration is repeatable
so I guess is a bug.
- go on a table
- press C-c ' to edit the formulas
- start to write @+..
It gets stuck and not even C-g can quit it..
This both on linux and OSx 10.6 with orgmode 6.33trans.
By the way I have a table like this
ID PY RB C HS RESULT SUBMITTED
-------+----+---+----+--------------+-----------
1 [X] [X] 233168 Y
2 [X] [X] 4613732 Y
3 [X] 6857 Y
4 [X] [X] 906609 Y
In short checks if a file is there and otherwise creates a link that
executes the visit of that file.
And the [X] are generated by an elisp function like:
(defun check_file (fname)
(interactive)
(if
(file-exists-p fname)
(concat "[[file:" fname "][X]]")
;; Otherwise create a link for a new file
(concat "[[elisp:(find-file \"" fname "\")][_]]"))
)
Now I would like to take directly the extension needed from the header
cell, and use the same formula for all the cells in the rectangle..
Is that a good idea?
The code I think could stay in the same file and evaluate it somehow
with the :session stuff (so finally I try it).
What do you think?
^ permalink raw reply [flat|nested] 7+ messages in thread* Re: Bug in table formula editor?
2009-11-22 3:15 Bug in table formula editor? andrea
@ 2009-11-22 5:56 ` Carsten Dominik
2009-11-22 11:51 ` andrea Crotti
0 siblings, 1 reply; 7+ messages in thread
From: Carsten Dominik @ 2009-11-22 5:56 UTC (permalink / raw)
To: andrea; +Cc: emacs-orgmode
Hi Andrea,
On Nov 22, 2009, at 4:15 AM, andrea wrote:
>
> Hi everyone, I noticed a problem which on my configuration is
> repeatable
> so I guess is a bug.
>
> - go on a table
> - press C-c ' to edit the formulas
> - start to write @+..
Can you please poost a concrete example and describe your steps more
precisely?
>
> It gets stuck and not even C-g can quit it..
> This both on linux and OSx 10.6 with orgmode 6.33trans.
>
> By the way I have a table like this
>
> ID PY RB C HS RESULT SUBMITTED
> -------+----+---+----+--------------+-----------
>
> 1 [X] [X] 233168 Y
> 2 [X] [X] 4613732 Y
> 3 [X] 6857 Y
> 4 [X] [X] 906609 Y
>
> In short checks if a file is there and otherwise creates a link that
> executes the visit of that file.
??? What is the formula? I guess you exported to ASCII
for posting, and that made a formula disappear?
I cannot see hat you mean?
- Carsten
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Bug in table formula editor?
2009-11-22 5:56 ` Carsten Dominik
@ 2009-11-22 11:51 ` andrea Crotti
2009-11-22 12:55 ` Andreas Burtzlaff
0 siblings, 1 reply; 7+ messages in thread
From: andrea Crotti @ 2009-11-22 11:51 UTC (permalink / raw)
To: emacs-orgmode
Yes I'm sorry the table was too big and screwed up so I didn't copy the formulas.
Anyway it's everything here
http://github.com/AndreaCrotti/my-project-euler/blob/master/euler.org
For the "bug" just go over the table
- press C-c '
- start typing a new formula with @+
after that emacs hangs and not even C-g restores it...
I now would like to use only one formula in the whole rectangular area and
take the extension from the first header of the column.
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Re: Bug in table formula editor?
2009-11-22 11:51 ` andrea Crotti
@ 2009-11-22 12:55 ` Andreas Burtzlaff
2009-11-22 13:46 ` andrea Crotti
0 siblings, 1 reply; 7+ messages in thread
From: Andreas Burtzlaff @ 2009-11-22 12:55 UTC (permalink / raw)
To: andrea Crotti; +Cc: emacs-orgmode
Hello andrea,
On Sun, 22 Nov 2009 11:51:31 +0000 (UTC)
andrea Crotti <andrea.crotti.0@gmail.com> wrote:
> Yes I'm sorry the table was too big and screwed up so I didn't copy the formulas.
> Anyway it's everything here
> http://github.com/AndreaCrotti/my-project-euler/blob/master/euler.org
>
> For the "bug" just go over the table
> - press C-c '
> - start typing a new formula with @+
> after that emacs hangs and not even C-g restores it...
I cannot reproduce this with Emacs 23.1.1 and org-6.33trans
release_6.33f.30.g011f.
If Emacs hangs completely it might be a bug in the Emacs core rather
then org-mode.
> I now would like to use only one formula in the whole rectangular area and
> take the extension from the first header of the column.
@1
so your full formula would look like:
'(check_file (concat "prob_" A& "." (downcase @1)))
HTH
Andreas
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Bug in table formula editor?
2009-11-22 12:55 ` Andreas Burtzlaff
@ 2009-11-22 13:46 ` andrea Crotti
2009-11-22 22:37 ` Carsten Dominik
0 siblings, 1 reply; 7+ messages in thread
From: andrea Crotti @ 2009-11-22 13:46 UTC (permalink / raw)
To: emacs-orgmode
Andreas Burtzlaff <andy13 <at> gmx.net> writes:
>
> I cannot reproduce this with Emacs 23.1.1 and org-6.33trans
> release_6.33f.30.g011f.
> If Emacs hangs completely it might be a bug in the Emacs core rather
> then org-mode.
I don't know what's the problem but it does it on both
osx and linux with emacs 23.1.50...
>
> @1
>
> so your full formula would look like:
>
> '(check_file (concat "prob_" A& "." (downcase @1)))
>
Ok thanks a lot, but I'm not able to define it over many columns..
I tried with
C&..F& =
but it doesn't keep the formula, is that wrong?
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Re: Bug in table formula editor?
2009-11-22 13:46 ` andrea Crotti
@ 2009-11-22 22:37 ` Carsten Dominik
2009-11-23 9:08 ` andrea
0 siblings, 1 reply; 7+ messages in thread
From: Carsten Dominik @ 2009-11-22 22:37 UTC (permalink / raw)
To: andrea Crotti; +Cc: emacs-orgmode
On Nov 22, 2009, at 2:46 PM, andrea Crotti wrote:
> Andreas Burtzlaff <andy13 <at> gmx.net> writes:
>
>>
>> I cannot reproduce this with Emacs 23.1.1 and org-6.33trans
>> release_6.33f.30.g011f.
>> If Emacs hangs completely it might be a bug in the Emacs core rather
>> then org-mode.
>
> I don't know what's the problem but it does it on both
> osx and linux with emacs 23.1.50...
>>
>> @1
>>
>> so your full formula would look like:
>>
>> '(check_file (concat "prob_" A& "." (downcase @1)))
>>
>
> Ok thanks a lot, but I'm not able to define it over many columns..
> I tried with
> C&..F& =
> but it doesn't keep the formula, is that wrong?
Unfortunately we do not have a way to define row
formulas..... You need to copy and page the formula, like
in a normal speadsheet....
- Carsten
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Bug in table formula editor?
2009-11-22 22:37 ` Carsten Dominik
@ 2009-11-23 9:08 ` andrea
0 siblings, 0 replies; 7+ messages in thread
From: andrea @ 2009-11-23 9:08 UTC (permalink / raw)
To: emacs-orgmode
Carsten Dominik <carsten.dominik@gmail.com> writes:
> On Nov 22, 2009, at 2:46 PM, andrea Crotti wrote:
> Unfortunately we do not have a way to define row
> formulas..... You need to copy and page the formula, like
> in a normal speadsheet....
>
> - Carsten
>
>
Ok no problem, but what is then
$P..$Q?
If I name the columns and apply a formula to this don't I stil obtain
what I wanted?
And another thing if I insert invalid formulas in the formula editor
why do they just get droppepd without even a warning of the mistake?
I wrote them a few times before understanding they were wrong..
Anyway it's *MUCH MORE* than a normal spreadsheet!
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2009-11-23 9:09 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2009-11-22 3:15 Bug in table formula editor? andrea
2009-11-22 5:56 ` Carsten Dominik
2009-11-22 11:51 ` andrea Crotti
2009-11-22 12:55 ` Andreas Burtzlaff
2009-11-22 13:46 ` andrea Crotti
2009-11-22 22:37 ` Carsten Dominik
2009-11-23 9:08 ` andrea
Code repositories for project(s) associated with this public inbox
https://git.savannah.gnu.org/cgit/emacs/org-mode.git
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).