* make doc failing
@ 2013-12-28 3:36 Rustom Mody
2013-12-28 5:01 ` Rustom Mody
2013-12-29 5:07 ` Nick Dokos
0 siblings, 2 replies; 12+ messages in thread
From: Rustom Mody @ 2013-12-28 3:36 UTC (permalink / raw)
To: emacs-orgmode
After latest pull make doc is failing to make org.pdf
Lots of stuff ending with
---------------------------
Output written on org.pdf (259 pages, 976592 bytes).
Transcript written on org.log.
/usr/bin/texi2dvi: pdftex exited with bad status, quitting.
make[1]: *** [org.pdf] Error 1
make[1]: Leaving directory `/src/pdsw/org-mode/doc'
make: *** [pdf] Error 2
But I cant seem to find org.log
And there is no org.pdf in doc
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: make doc failing
2013-12-28 3:36 make doc failing Rustom Mody
@ 2013-12-28 5:01 ` Rustom Mody
2013-12-29 17:15 ` Rustom Mody
2013-12-29 5:07 ` Nick Dokos
1 sibling, 1 reply; 12+ messages in thread
From: Rustom Mody @ 2013-12-28 5:01 UTC (permalink / raw)
To: emacs-orgmode
On Sat, Dec 28, 2013 at 9:06 AM, Rustom Mody <rustompmody@gmail.com> wrote:
> After latest pull make doc is failing to make org.pdf
>
> Lots of stuff ending with
> ---------------------------
> Output written on org.pdf (259 pages, 976592 bytes).
> Transcript written on org.log.
> /usr/bin/texi2dvi: pdftex exited with bad status, quitting.
> make[1]: *** [org.pdf] Error 1
> make[1]: Leaving directory `/src/pdsw/org-mode/doc'
> make: *** [pdf] Error 2
>
> But I cant seem to find org.log
> And there is no org.pdf in doc
Further:
Went into doc directory and did
$ texi2dvi org.texi
no (visible) error
followed by
$ dvipdf org.dvi
Seems to be working
--
http://www.the-magus.in
http://blog.languager.org
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: make doc failing
2013-12-28 5:01 ` Rustom Mody
@ 2013-12-29 17:15 ` Rustom Mody
2013-12-29 17:58 ` Nick Dokos
2013-12-30 2:21 ` Rustom Mody
0 siblings, 2 replies; 12+ messages in thread
From: Rustom Mody @ 2013-12-29 17:15 UTC (permalink / raw)
To: emacs-orgmode
Nick wrote:
> I tried last night and again tonight after pulling: I get no errors
> with `make doc'.
And I continue to get the errors with no doc (pdf) built.
I can attach the build messages (800 lines)
For now some snippets of what I see
git pull
Already up-to-date.
...
texi2pdf --batch --clean --expand org.texi
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LANG = "C "
are supported and installed on your system.
...
Cannot open load file: ob-sh
-----------------
Note that locale returns as follows:
LANG=en_US.UTF-8
LANGUAGE=en_US.UTF-8
LC_CTYPE="en_US.UTF-8"
LC_NUMERIC="en_US.UTF-8"
LC_TIME="en_US.UTF-8"
LC_COLLATE="en_US.UTF-8"
LC_MONETARY="en_US.UTF-8"
LC_MESSAGES="en_US.UTF-8"
LC_PAPER="en_US.UTF-8"
LC_NAME="en_US.UTF-8"
LC_ADDRESS="en_US.UTF-8"
LC_TELEPHONE="en_US.UTF-8"
LC_MEASUREMENT="en_US.UTF-8"
LC_IDENTIFICATION="en_US.UTF-8"
LC_ALL=en_US.UTF-8
^ permalink raw reply [flat|nested] 12+ messages in thread* Re: make doc failing
2013-12-29 17:15 ` Rustom Mody
@ 2013-12-29 17:58 ` Nick Dokos
2013-12-30 2:21 ` Rustom Mody
1 sibling, 0 replies; 12+ messages in thread
From: Nick Dokos @ 2013-12-29 17:58 UTC (permalink / raw)
To: emacs-orgmode
Rustom Mody <rustompmody@gmail.com> writes:
> Nick wrote:
>> I tried last night and again tonight after pulling: I get no errors
>> with `make doc'.
>
> And I continue to get the errors with no doc (pdf) built.
> I can attach the build messages (800 lines)
> For now some snippets of what I see
>
> git pull
> Already up-to-date.
> ...
>
> texi2pdf --batch --clean --expand org.texi
> perl: warning: Setting locale failed.
> perl: warning: Please check that your locale settings:
> LANGUAGE = (unset),
> LC_ALL = (unset),
> LANG = "C "
> are supported and installed on your system.
Where does perl come into the picture? Both texi2pdf and the program it
calls, texi2dvi, are shell scripts. The only references to perl I find
are in the run_hevea() function of texi2dvi and in the target making
the orgcard in the doc Makefile. But that should not cause the PDF
manual problems
>
> ...
>
> Cannot open load file: ob-sh
ob-sh does not exist any more. Check your local.mk and delete it if it's
there - I had the same problem because I had added it to
BTEST_OB_LANGUAGES.
Nick
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: make doc failing
2013-12-29 17:15 ` Rustom Mody
2013-12-29 17:58 ` Nick Dokos
@ 2013-12-30 2:21 ` Rustom Mody
2013-12-30 5:47 ` Nick Dokos
2013-12-30 5:57 ` Rustom Mody
1 sibling, 2 replies; 12+ messages in thread
From: Rustom Mody @ 2013-12-30 2:21 UTC (permalink / raw)
To: emacs-orgmode
Nick wrote:
> > texi2pdf --batch --clean --expand org.texi
> > perl: warning: Setting locale failed.
> > perl: warning: Please check that your locale settings:
> > LANGUAGE = (unset),
> > LC_ALL = (unset),
> > LANG = "C "
> > are supported and installed on your system.
> Where does perl come into the picture? Both texi2pdf and the program it
> calls, texi2dvi, are shell scripts. The only references to perl I find
> are in the run_hevea() function of texi2dvi and in the target making
> the orgcard in the doc Makefile. But that should not cause the PDF
> manual problems
texinfo has been ported to perl:
http://savannah.gnu.org/forum/forum.php?forum_id=7507
I find makeinfo and texi2html at least are perl
$ makeinfo --version
makeinfo (GNU texinfo) 5.2
Is yours the same?
> > Cannot open load file: ob-sh
> ob-sh does not exist any more. Check your local.mk and delete it if it's
> there - I had the same problem because I had added it to
> BTEST_OB_LANGUAGES.
Nothing in local.mk but I find a testing/lisp/test-ob-sh.el
Is my git remote misdirected by any chance?
$ git remote -v show
origin git://repo.or.cz/org-mode.git (fetch)
origin git://repo.or.cz/org-mode.git (push)
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: make doc failing
2013-12-30 2:21 ` Rustom Mody
@ 2013-12-30 5:47 ` Nick Dokos
2013-12-30 5:57 ` Rustom Mody
1 sibling, 0 replies; 12+ messages in thread
From: Nick Dokos @ 2013-12-30 5:47 UTC (permalink / raw)
To: emacs-orgmode
Rustom Mody <rustompmody@gmail.com> writes:
> Nick wrote:
>
>> > texi2pdf --batch --clean --expand org.texi
>> > perl: warning: Setting locale failed.
>> > perl: warning: Please check that your locale settings:
>> > LANGUAGE = (unset),
>> > LC_ALL = (unset),
>> > LANG = "C "
>> > are supported and installed on your system.
>
>> Where does perl come into the picture? Both texi2pdf and the program it
>> calls, texi2dvi, are shell scripts. The only references to perl I find
>> are in the run_hevea() function of texi2dvi and in the target making
>> the orgcard in the doc Makefile. But that should not cause the PDF
>> manual problems
>
> texinfo has been ported to perl:
> http://savannah.gnu.org/forum/forum.php?forum_id=7507
> I find makeinfo and texi2html at least are perl
>
> $ makeinfo --version
> makeinfo (GNU texinfo) 5.2
>
> Is yours the same?
>
No, mine is 4.13 - apparently before the perl switcheroo.
>> > Cannot open load file: ob-sh
>
>> ob-sh does not exist any more. Check your local.mk and delete it if it's
>> there - I had the same problem because I had added it to
>> BTEST_OB_LANGUAGES.
>
> Nothing in local.mk but I find a testing/lisp/test-ob-sh.el
That's OK I think. You might want to search for a (require 'ob-sh) in
your tree however.
> Is my git remote misdirected by any chance?
>
> $ git remote -v show
> origin git://repo.or.cz/org-mode.git (fetch)
> origin git://repo.or.cz/org-mode.git (push)
That's probably OK - afaik, the repo.or.cz mirror may be a bit behind
at times but it should not matter very much. The canonical place however
is git://orgmode.org/org-mode.
Nick
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: make doc failing
2013-12-30 2:21 ` Rustom Mody
2013-12-30 5:47 ` Nick Dokos
@ 2013-12-30 5:57 ` Rustom Mody
2013-12-30 10:06 ` Vladimir Lomov
2013-12-30 10:33 ` Achim Gratz
1 sibling, 2 replies; 12+ messages in thread
From: Rustom Mody @ 2013-12-30 5:57 UTC (permalink / raw)
To: emacs-orgmode
Nick wrote:
> Rusi wrote:
> > $ makeinfo --version
> > makeinfo (GNU texinfo) 5.2
> >
> > Is yours the same?
> >
> No, mine is 4.13 - apparently before the perl switcheroo.
And doc/Makefile has:
%.pdf: LC_ALL=C # work around a bug in texi2dvi
%.pdf: LANG=C # work around a bug in texi2dvi
%.pdf: %.texi org-version.inc
$(TEXI2PDF) $<
Commenting out the LC/LANG lines makes the perl warning go away
Generation is still a problem
Works from command line texi2dvi
Fails with make doc
In short texi2dvi works texi2pdf fails
^ permalink raw reply [flat|nested] 12+ messages in thread* Re: make doc failing
2013-12-30 5:57 ` Rustom Mody
@ 2013-12-30 10:06 ` Vladimir Lomov
2013-12-30 15:23 ` Rustom Mody
2013-12-30 10:33 ` Achim Gratz
1 sibling, 1 reply; 12+ messages in thread
From: Vladimir Lomov @ 2013-12-30 10:06 UTC (permalink / raw)
To: Rustom Mody; +Cc: emacs-orgmode
Hello,
** Rustom Mody [2013-12-30 11:27:46 +0530]:
> Nick wrote:
>> Rusi wrote:
>>> $ makeinfo --version
>>> makeinfo (GNU texinfo) 5.2
>>> Is yours the same?
>> No, mine is 4.13 - apparently before the perl switcheroo.
> And doc/Makefile has:
> %.pdf: LC_ALL=C # work around a bug in texi2dvi
> %.pdf: LANG=C # work around a bug in texi2dvi
> %.pdf: %.texi org-version.inc
> $(TEXI2PDF) $<
> Commenting out the LC/LANG lines makes the perl warning go away
> Generation is still a problem
> Works from command line texi2dvi
> Fails with make doc
> In short texi2dvi works texi2pdf fails
Try to add -q option to TEXI2PDF, I resolved that issue when texinfo 5.0
(actually I don't remember when, though could dig git log of my repo)
apperead in my distro (Archlinux).
P.S.
If you are interesed how I do this, see this file (package build script),
https://github.com/vp1981/pkgbuild/blob/master/emacs-org-mode/PKGBUILD
especially line with TEXI2PDF.
---
WBR, Vladimir Lomov
--
Oppernockity tunes but once.
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: make doc failing
2013-12-30 10:06 ` Vladimir Lomov
@ 2013-12-30 15:23 ` Rustom Mody
2013-12-31 5:12 ` Rustom Mody
0 siblings, 1 reply; 12+ messages in thread
From: Rustom Mody @ 2013-12-30 15:23 UTC (permalink / raw)
To: emacs-orgmode
On Mon, Dec 30, 2013 at 3:36 PM, Vladimir Lomov wrote:
>> In short texi2dvi works texi2pdf fails
>
> Try to add -q option to TEXI2PDF, I resolved that issue when texinfo 5.0
> (actually I don't remember when, though could dig git log of my repo)
> apperead in my distro (Archlinux).
>
> P.S.
> If you are interesed how I do this, see this file (package build script),
> https://github.com/vp1981/pkgbuild/blob/master/emacs-org-mode/PKGBUILD
> especially line with TEXI2PDF.
No -q does not help
Likewise Achim:
> The error should go away if you remove the comments. Let me know if
> that works for you, I'll check in a fix in a few days.
The perl warning goes if those those LC_ALL/LANG lines are commented out
However the pdf generation still fails
However texi2dvi works (maybe with some strange artifacts in the pdf
-- not checked details) and then dvipdf.
Also removing the --expand seems to make it work without errors
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: make doc failing
2013-12-30 5:57 ` Rustom Mody
2013-12-30 10:06 ` Vladimir Lomov
@ 2013-12-30 10:33 ` Achim Gratz
1 sibling, 0 replies; 12+ messages in thread
From: Achim Gratz @ 2013-12-30 10:33 UTC (permalink / raw)
To: emacs-orgmode
Am 30.12.2013 06:57, schrieb Rustom Mody:
> And doc/Makefile has:
>
> %.pdf: LC_ALL=C # work around a bug in texi2dvi
> %.pdf: LANG=C # work around a bug in texi2dvi
> %.pdf: %.texi org-version.inc
> $(TEXI2PDF) $<
>
> Commenting out the LC/LANG lines makes the perl warning go away
The error should go away if you remove the comments. Let me know if
that works for you, I'll check in a fix in a few days.
--
Achim.
(on the road :-)
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: make doc failing
2013-12-28 3:36 make doc failing Rustom Mody
2013-12-28 5:01 ` Rustom Mody
@ 2013-12-29 5:07 ` Nick Dokos
1 sibling, 0 replies; 12+ messages in thread
From: Nick Dokos @ 2013-12-29 5:07 UTC (permalink / raw)
To: emacs-orgmode
Rustom Mody <rustompmody@gmail.com> writes:
> After latest pull make doc is failing to make org.pdf
>
> Lots of stuff ending with
> ---------------------------
> Output written on org.pdf (259 pages, 976592 bytes).
> Transcript written on org.log.
> /usr/bin/texi2dvi: pdftex exited with bad status, quitting.
> make[1]: *** [org.pdf] Error 1
> make[1]: Leaving directory `/src/pdsw/org-mode/doc'
> make: *** [pdf] Error 2
>
> But I cant seem to find org.log
> And there is no org.pdf in doc
>
>
I tried last night and again tonight after pulling: I get no errors
with `make doc'.
--
Nick
^ permalink raw reply [flat|nested] 12+ messages in thread
end of thread, other threads:[~2013-12-31 5:12 UTC | newest]
Thread overview: 12+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-12-28 3:36 make doc failing Rustom Mody
2013-12-28 5:01 ` Rustom Mody
2013-12-29 17:15 ` Rustom Mody
2013-12-29 17:58 ` Nick Dokos
2013-12-30 2:21 ` Rustom Mody
2013-12-30 5:47 ` Nick Dokos
2013-12-30 5:57 ` Rustom Mody
2013-12-30 10:06 ` Vladimir Lomov
2013-12-30 15:23 ` Rustom Mody
2013-12-31 5:12 ` Rustom Mody
2013-12-30 10:33 ` Achim Gratz
2013-12-29 5:07 ` Nick Dokos
Code repositories for project(s) associated with this public inbox
https://git.savannah.gnu.org/cgit/emacs/org-mode.git
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).