emacs-orgmode@gnu.org archives
 help / color / mirror / code / Atom feed

* ditaa
@ 2011-08-13  0:06 Henri-Paul Indiogine
  2011-08-13  6:39 ` ditaa Sebastien Vauban
  0 siblings, 1 reply; 6+ messages in thread
From: Henri-Paul Indiogine @ 2011-08-13  0:06 UTC (permalink / raw)
  To: emacs-org

Greetings!

Is anyone experiencing problems with LaTeX export + ditaa?   After a
git pull upgrade this morning the export to LaTeX of ditaa has changed
to hyperref.   I can post the relevant LaTeX lines if necessary.

Thanks,
Henri-Paul

-- 
Henri-Paul Indiogine

Curriculum & Instruction
Texas A&M University
TutorFind Learning Centre

Email: hindiogine@gmail.com
Skype: hindiogine
Website: http://people.cehd.tamu.edu/~sindiogine

^ permalink raw reply	[flat|nested] 6+ messages in thread

• * Re: ditaa
    2011-08-13  0:06 ditaa Henri-Paul Indiogine
  @ 2011-08-13  6:39 ` Sebastien Vauban
    2011-08-13  6:55   ` ditaa Nick Dokos
    0 siblings, 1 reply; 6+ messages in thread
  From: Sebastien Vauban @ 2011-08-13  6:39 UTC (permalink / raw)
    To: emacs-orgmode-mXXj517/zsQ
  
  Hi Henri-Paul,
  
  Henri-Paul Indiogine wrote:
  > Is anyone experiencing problems with LaTeX export + ditaa?   After a
  > git pull upgrade this morning the export to LaTeX of ditaa has changed
  > to hyperref.   I can post the relevant LaTeX lines if necessary.
  
  Yes, I think it'd help if you could post a complete -- but minimal... --
  example which allows us to (try to) reproduce the problem.
  
  Best regards,
    Seb
  
  -- 
  Sebastien Vauban
  
  ^ permalink raw reply	[flat|nested] 6+ messages in thread

• • * Re: ditaa
      2011-08-13  6:39 ` ditaa Sebastien Vauban
    @ 2011-08-13  6:55   ` Nick Dokos
      2011-08-13  8:00     ` ditaa Henri-Paul Indiogine
      0 siblings, 1 reply; 6+ messages in thread
    From: Nick Dokos @ 2011-08-13  6:55 UTC (permalink / raw)
      To: Sebastien Vauban; +Cc: nicholas.dokos, emacs-orgmode
    
    Sebastien Vauban <wxhgmqzgwmuf@spammotel.com> wrote:
    
    > Hi Henri-Paul,
    > 
    > Henri-Paul Indiogine wrote:
    > > Is anyone experiencing problems with LaTeX export + ditaa?   After a
    > > git pull upgrade this morning the export to LaTeX of ditaa has changed
    > > to hyperref.   I can post the relevant LaTeX lines if necessary.
    > 
    > Yes, I think it'd help if you could post a complete -- but minimal... --
    > example which allows us to (try to) reproduce the problem.
    > 
    
    I just pulled
    
       Org-mode version 7.7 (release_7.7.64.g1bbf)
    
    and tried on this:
    
    --8<---------------cut here---------------start------------->8---
    * Export a picture
    
    Need to load ob-ditaa to execute these:
    
    #+begin_src ditaa :file image.png :cmdline -r :exports both
    +---------+
    | cBLU    |
    |         |
    |    +----+
    |    |cPNK|
    |    |    |
    +----+----+
    #+end_src
    
    #+results:
    [[file:image.png]]
    --8<---------------cut here---------------end--------------->8---
    
    
    It worked fine - the link became
    
    
    \includegraphics[width=.9\linewidth]{image.png}
    
    
    in the tex file.
    
    Nick
    
    ^ permalink raw reply	[flat|nested] 6+ messages in thread

  • • * Re: ditaa
        2011-08-13  6:55   ` ditaa Nick Dokos
      @ 2011-08-13  8:00     ` Henri-Paul Indiogine
        2011-08-19 13:30       ` ditaa Eric Schulte
        0 siblings, 1 reply; 6+ messages in thread
      From: Henri-Paul Indiogine @ 2011-08-13  8:00 UTC (permalink / raw)
        To: emacs-org
      
      Greetings!
      
      This is from my .emacs
      
      (org-babel-do-load-languages
       'org-babel-load-languages
       '((R . t)
         (ditaa . t)
         .........
         .........
      (defun my-org-confirm-babel-evaluate (lang body)
        (not (string= lang "ditaa")))  ; don't ask for ditaa
      (setq org-confirm-babel-evaluate 'my-org-confirm-babel-evaluate)
      
      
      This is what I obtain in the exported tex file:
      
      \hyperref[home-henk-Dropbox-dissertation-work-flow.png]{file:/home/henk/Dropbox/dissertation/work-flow.png}
      
      
      The ditaa code is between these lines:
      
      #+CAPTION: Research work flow
      #+LABEL: fig:workflow
      #+begin_src ditaa :file /home/henk/Dropbox/dissertation/work-flow.png
      :cmdline -r -s 1.0
      ......
      #+end_src
      
      If I execute the code (C-c C-c) I obtain the following:
      
      ditaa version 0.9, Copyright (C) 2004--2009  Efstathios (Stathis) Sideris
      
      Running with options:
      round-corners
      scale = 1.0
      Reading file: /tmp/babel-4681Hni/ditaa-46811gs
      Locale: en_CA
      Dialog.bold
      Rendering to file: /home/henk/Dropbox/dissertation/work-flow.png
      Done in 5sec
      
      The png file is created.  The only issue is the faulty tex code that
      is generated.
      
      
      I have also noticed that the editing of the org file sometimes slows
      down considerably.  Maybe it has nothing to do with it, but it
      happened after I started using ditaa.  I am wondering about using TikZ
      instead.
      
      Thanks,
      Henri-Paul
      
      
      
      -- 
      Henri-Paul Indiogine
      
      Curriculum & Instruction
      Texas A&M University
      TutorFind Learning Centre
      
      Email: hindiogine@gmail.com
      Skype: hindiogine
      Website: http://people.cehd.tamu.edu/~sindiogine
      
      ^ permalink raw reply	[flat|nested] 6+ messages in thread

    • • * Re: ditaa
          2011-08-13  8:00     ` ditaa Henri-Paul Indiogine
        @ 2011-08-19 13:30       ` Eric Schulte
          2011-08-19 15:52         ` ditaa Henri-Paul Indiogine
          0 siblings, 1 reply; 6+ messages in thread
        From: Eric Schulte @ 2011-08-19 13:30 UTC (permalink / raw)
          To: Henri-Paul Indiogine; +Cc: emacs-org
        
        Henri-Paul Indiogine <hindiogine@gmail.com> writes:
        
        > Greetings!
        >
        > This is from my .emacs
        >
        > (org-babel-do-load-languages
        >  'org-babel-load-languages
        >  '((R . t)
        >    (ditaa . t)
        >    .........
        >    .........
        > (defun my-org-confirm-babel-evaluate (lang body)
        >   (not (string= lang "ditaa")))  ; don't ask for ditaa
        > (setq org-confirm-babel-evaluate 'my-org-confirm-babel-evaluate)
        >
        >
        > This is what I obtain in the exported tex file:
        >
        > \hyperref[home-henk-Dropbox-dissertation-work-flow.png]{file:/home/henk/Dropbox/dissertation/work-flow.png}
        >
        
        When I export the following simple ditaa block
        
        #+begin_src ditaa :file work-flow.png
            +-------+             +--------+
            |       |             |        |
            | Org   |------------>| Tex    |
            |       |             |        |
            +-------+             +--------+
        #+end_src
        
        I get the following in the resulting .tex file.
        
        \includegraphics[width=.9\linewidth]{work-flow.png}
        
        Are you using the most recent version of Org-mode?  Perhaps try starting
        up Emacs with a minimal configuration using the -Q flag to the emacs
        executable, and see if the problem persists.  If not it is caused by
        something else in your configuration.
        
        >
        > The ditaa code is between these lines:
        >
        > #+CAPTION: Research work flow
        > #+LABEL: fig:workflow
        > #+begin_src ditaa :file /home/henk/Dropbox/dissertation/work-flow.png
        > :cmdline -r -s 1.0
        > ......
        > #+end_src
        >
        > If I execute the code (C-c C-c) I obtain the following:
        >
        > ditaa version 0.9, Copyright (C) 2004--2009  Efstathios (Stathis) Sideris
        >
        > Running with options:
        > round-corners
        > scale = 1.0
        > Reading file: /tmp/babel-4681Hni/ditaa-46811gs
        > Locale: en_CA
        > Dialog.bold
        > Rendering to file: /home/henk/Dropbox/dissertation/work-flow.png
        > Done in 5sec
        >
        > The png file is created.  The only issue is the faulty tex code that
        > is generated.
        >
        
        Is the previous text inserted into your org-mode buffer?  If so then
        that is certainly wrong, the only thing inserted into the org buffer as
        results should be a file link to the resulting image.
        
        >
        > I have also noticed that the editing of the org file sometimes slows
        > down considerably.  Maybe it has nothing to do with it, but it
        > happened after I started using ditaa.  I am wondering about using TikZ
        > instead.
        >
        
        This could be due to the `org-src-fontify-natively', try setting this
        variable to nil and see if the problem persists.
        
        On a side note (and personal preference) I would highly recommend using
        TikZ for LaTeX documents as the finished product seamlessly integrates
        with the rest of the document and scales nicely from posted to post-card
        printings.
        
        Best -- Eric
        
        >
        > Thanks,
        > Henri-Paul
        
        -- 
        Eric Schulte
        http://cs.unm.edu/~eschulte/
        
        ^ permalink raw reply	[flat|nested] 6+ messages in thread

      • • * Re: ditaa
            2011-08-19 13:30       ` ditaa Eric Schulte
          @ 2011-08-19 15:52         ` Henri-Paul Indiogine
            0 siblings, 0 replies; 6+ messages in thread
          From: Henri-Paul Indiogine @ 2011-08-19 15:52 UTC (permalink / raw)
            To: Eric Schulte; +Cc: emacs-org
          
          Hi Eric!
          
          2011/8/19 Eric Schulte <schulte.eric@gmail.com>:
          > On a side note (and personal preference) I would highly recommend using
          > TikZ for LaTeX documents as the finished product seamlessly integrates
          > with the rest of the document and scales nicely from posted to post-card
          > printings.
          
          Yes, I agree.  I had used TikZ previously and liked it a lot.  I have
          left ditaa after trying it with minimal example and still having the
          problem. I do not have time to look at it any longer.
          
          I wrote the TikZ code instead in my org file and that works very well.
          
          Thanks,
          Henri-Paul
          
          -- 
          Henri-Paul Indiogine
          
          Curriculum & Instruction
          Texas A&M University
          TutorFind Learning Centre
          
          Email: hindiogine@gmail.com
          Skype: hindiogine
          Website: http://people.cehd.tamu.edu/~sindiogine
          
          ^ permalink raw reply	[flat|nested] 6+ messages in thread

end of thread, other threads:[~2011-08-19 15:53 UTC | newest]

Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2011-08-13  0:06 ditaa Henri-Paul Indiogine
2011-08-13  6:39 ` ditaa Sebastien Vauban
2011-08-13  6:55   ` ditaa Nick Dokos
2011-08-13  8:00     ` ditaa Henri-Paul Indiogine
2011-08-19 13:30       ` ditaa Eric Schulte
2011-08-19 15:52         ` ditaa Henri-Paul Indiogine

Code repositories for project(s) associated with this public inbox

	https://git.savannah.gnu.org/cgit/emacs/org-mode.git

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).