* Broken org-mode "Column width and alignment" in latest version @ 2017-12-08 22:19 Ruy Exel 2017-12-08 22:28 ` Kaushal Modi 0 siblings, 1 reply; 7+ messages in thread From: Ruy Exel @ 2017-12-08 22:19 UTC (permalink / raw) To: emacs-orgmode [-- Attachment #1: Type: text/plain, Size: 722 bytes --] The "Column width and alignment" feature of org-mode ( http://orgmode.org/manual/Column-width-and-alignment.html) is not working in the latest GIT version (as of Fri Dec 8 20:06:59 BRST 2017). I have just tested it in the table |---+------------------------------| | | <6> | | 1 | one | | 2 | two | | 3 | This is a long chunk of text | | 4 | four | |---+------------------------------| which is actually the example given in the manual. It fails under the latest version (column width is unchanged upon alignment) but it works OK in an older version (Org version 7.9.3f - GNU Emacs 24.3). Regards, Ruy [-- Attachment #2: Type: text/html, Size: 1066 bytes --] ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Broken org-mode "Column width and alignment" in latest version 2017-12-08 22:19 Broken org-mode "Column width and alignment" in latest version Ruy Exel @ 2017-12-08 22:28 ` Kaushal Modi [not found] ` <CAB8Wf+8JXWuJOrqtumspFak7oW1kcgOoHnbYgPyb7Rk-UC8uZA@mail.gmail.com> 0 siblings, 1 reply; 7+ messages in thread From: Kaushal Modi @ 2017-12-08 22:28 UTC (permalink / raw) To: Ruy Exel; +Cc: emacs-orgmode [-- Attachment #1: Type: text/plain, Size: 1596 bytes --] On Fri, Dec 8, 2017 at 5:21 PM Ruy Exel <ruyexel@gmail.com> wrote: > The "Column width and alignment" feature of org-mode ( > http://orgmode.org/manual/Column-width-and-alignment.html) is not working > in the latest GIT version (as of Fri Dec 8 20:06:59 BRST 2017). > > I have just tested it in the table > > |---+------------------------------| > | | <6> | > | 1 | one | > | 2 | two | > | 3 | This is a long chunk of text | > | 4 | four | > |---+------------------------------| > > which is actually the example given in the manual. It fails under the > latest version (column width is unchanged upon alignment) > I am assuming you are using the master/development version of Org from git? If so, see this in ORG-NEWS: *** =align= STARTUP value no longer narrow table columns Columns narrowing (or shrinking) is now dynamic. See [[*Dynamically narrow table columns]] for details. In particular, it is decoupled from aligning. If you need to automatically shrink columns upon opening an Org document, use =shrink= value instead, or in addition to align: #+BEGIN_EXAMPLE ,#+STARTUP: align shrink #+END_EXAMPLE > but it works OK in an older version (Org version 7.9.3f - GNU Emacs 24.3). > Wow! That's a very old version! As you are making this big version upgrade, it would be worthwhile to go through the whole of http://orgmode.org/cgit.cgi/org-mode.git/tree/etc/ORG-NEWS and make a note of new features and few breaking changes since that version. -- Kaushal Modi [-- Attachment #2: Type: text/html, Size: 2662 bytes --] ^ permalink raw reply [flat|nested] 7+ messages in thread
[parent not found: <CAB8Wf+8JXWuJOrqtumspFak7oW1kcgOoHnbYgPyb7Rk-UC8uZA@mail.gmail.com>]
* Re: Broken org-mode "Column width and alignment" in latest version [not found] ` <CAB8Wf+8JXWuJOrqtumspFak7oW1kcgOoHnbYgPyb7Rk-UC8uZA@mail.gmail.com> @ 2017-12-09 2:50 ` Kaushal Modi 2017-12-09 18:11 ` Ruy Exel 0 siblings, 1 reply; 7+ messages in thread From: Kaushal Modi @ 2017-12-09 2:50 UTC (permalink / raw) To: Ruy Exel, emacs-org list [-- Attachment #1: Type: text/plain, Size: 2903 bytes --] Hello Ruy, First of all, thanks for confirming that this worked for you. Secondly, no question is a newbie question :) This mailing list is one of the friendliest mailing lists I've participated in. So don't worry about upsetting someone, or getting offended. So I am continuing this thread on the mailing list. Feel free to ask any kind of Org question you might have, and there are many folks here to help you out. Further comments are inline below. On Fri, Dec 8, 2017, 5:56 PM Ruy Exel <ruyexel@gmail.com> wrote: > > > #+BEGIN_EXAMPLE > > ,#+STARTUP: align shrink > > #+END_EXAMPLE > > Got it! Thanks very much. > You're welcome. I am in fact a brand new user of org-mode and 7.9.3f is just the version > which was dormant in my computer before I updated to the GIT version. > Sometimes I use it for comparison. > If you are a brand new user, it's my personal opinion that that stick to the stable release. You get that by cloning the maint branch instead, or getting org or org-plus-contrib via Org Elpa. The master branch isn't unstable, it's perfectly fine as a daily driver, but some features could be in flux, which could get confusing if you just started using Org. However I noticed that the online manual at (http://orgmode.org/manual/ > Column-width-and-alignment.html) is more compatible with that old version > than the GIT version. > The online version is synced with the stable releases of Org, which I mentioned above. It's not in sync with the version you think (7.9.3f), but with the latest stable release 9.1.4 (as of today). It just happens that the column shrink feature was recently (few months) added to the Org master branch. So you don't see its reference in the online manual. That feature will go out in the next major release of the stable version.. 9.2. Of course I do not expect to have a fully working manual for a changing > system such as the GIT version, > You're in for a treat here :). This is Emacs, and in my experience the best way to access the Info manuals. The Info manuals that get built along with Org are always in sync with the respective versions. So, Org master > Manuals: Info (synced with Org master) Org maint > Manuals: Info, online (synced with Org maint) If you haven't used Info manuals, do C-h i h to learn how to use those from within Emacs. They are vastly better searchable than the online version. And you always access the correct version of the Org Info manual from within Emacs. but in case the above manual is superseded by some other one, I'd like to > know where it is. > As above, if using master branch Org, you get the correct version of the manual from within Emacs. PS: I figure this newbie message is not relevant to the folks at > emacs-orgmode@gnu.org, so I'am not CCing it there anymore. > As I said in the beginning of the email, don't worry. We are all here to learn and share. > -- Kaushal Modi [-- Attachment #2: Type: text/html, Size: 5629 bytes --] ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Broken org-mode "Column width and alignment" in latest version 2017-12-09 2:50 ` Kaushal Modi @ 2017-12-09 18:11 ` Ruy Exel 2017-12-12 20:53 ` Kaushal Modi 0 siblings, 1 reply; 7+ messages in thread From: Ruy Exel @ 2017-12-09 18:11 UTC (permalink / raw) To: Kaushal Modi; +Cc: emacs-org list [-- Attachment #1: Type: text/plain, Size: 4739 bytes --] Dear Kaushal, The real treat is to read your nice message and to be a member of such a fantastic group of people! Following your advice to stick to a stable release I searched for info on how to install it and I found instructions in http://orgmode.org/org.html#Installation telling me to run "M-x package-install RET org RET" from within emacs. I did it and it all looked like everything was running smoothly untill I was issued the messages: WARNING: No org-loaddefs.el file could be found from where org.el is loaded. You need to run "make" or "make autoloads" from Org lisp directory I am used to this since I first tried the cloned git version, but I noticed that there is no Makefile in the directory containing the newly dowloaded files (~/.emacs.d/elpa/org-20171113/), so I got stuck. I noticed that in the above installation instructions it is mentioned that: Important: you need to do this in a session where no .org file has been visited, i.e., where no Org built-in function have been loaded. Otherwise autoload Org functions will mess up the installation. so I repeated the process right after starting emacs with the --no-init-files option, then I added the line "(package-initialize)" to my initialization file but it still does not work, namely the old org-mode is loaded upon starting emacs. It is curious that I now have two org-mode entries in the top Emacs-Info node, one for the old version (7.9.3f) and another one for the new one (9.1.2 (release_9.1.2-37-g3f8d67)). Could I have premanently messed up my emacs installation by not following the above Important advice? Regards, Ruy Exel On Sat, Dec 9, 2017 at 12:50 AM, Kaushal Modi <kaushal.modi@gmail.com> wrote: > Hello Ruy, > > First of all, thanks for confirming that this worked for you. > > Secondly, no question is a newbie question :) This mailing list is one of > the friendliest mailing lists I've participated in. So don't worry about > upsetting someone, or getting offended. So I am continuing this thread on > the mailing list. > > Feel free to ask any kind of Org question you might have, and there are > many folks here to help you out. > > Further comments are inline below. > > On Fri, Dec 8, 2017, 5:56 PM Ruy Exel <ruyexel@gmail.com> wrote: > >> >> > #+BEGIN_EXAMPLE >> > ,#+STARTUP: align shrink >> > #+END_EXAMPLE >> >> Got it! Thanks very much. >> > > You're welcome. > > I am in fact a brand new user of org-mode and 7.9.3f is just the version >> which was dormant in my computer before I updated to the GIT version. >> Sometimes I use it for comparison. >> > > If you are a brand new user, it's my personal opinion that that stick to > the stable release. You get that by cloning the maint branch instead, or > getting org or org-plus-contrib via Org Elpa. > > The master branch isn't unstable, it's perfectly fine as a daily driver, > but some features could be in flux, which could get confusing if you just > started using Org. > > However I noticed that the online manual at (http://orgmode.org/manual/Col >> umn-width-and-alignment.html) is more compatible with that old version >> than the GIT version. >> > > The online version is synced with the stable releases of Org, which I > mentioned above. It's not in sync with the version you think (7.9.3f), but > with the latest stable release 9.1.4 (as of today). > > It just happens that the column shrink feature was recently (few months) > added to the Org master branch. So you don't see its reference in the > online manual. That feature will go out in the next major release of the > stable version.. 9.2. > > Of course I do not expect to have a fully working manual for a changing >> system such as the GIT version, >> > > You're in for a treat here :). This is Emacs, and in my experience the > best way to access the Info manuals. The Info manuals that get built along > with Org are always in sync with the respective versions. > > So, > > Org master > Manuals: Info (synced with Org master) > > Org maint > Manuals: Info, online (synced with Org maint) > > If you haven't used Info manuals, do C-h i h to learn how to use those > from within Emacs. They are vastly better searchable than the online > version. And you always access the correct version of the Org Info manual > from within Emacs. > > but in case the above manual is superseded by some other one, I'd like to >> know where it is. >> > > As above, if using master branch Org, you get the correct version of the > manual from within Emacs. > > PS: I figure this newbie message is not relevant to the folks at >> emacs-orgmode@gnu.org, so I'am not CCing it there anymore. >> > > As I said in the beginning of the email, don't worry. We are all here to > learn and share. > >> -- > > Kaushal Modi > [-- Attachment #2: Type: text/html, Size: 8274 bytes --] ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Broken org-mode "Column width and alignment" in latest version 2017-12-09 18:11 ` Ruy Exel @ 2017-12-12 20:53 ` Kaushal Modi 2017-12-18 12:57 ` Ruy Exel 0 siblings, 1 reply; 7+ messages in thread From: Kaushal Modi @ 2017-12-12 20:53 UTC (permalink / raw) To: Ruy Exel; +Cc: emacs-org list [-- Attachment #1: Type: text/plain, Size: 3548 bytes --] On Sat, Dec 9, 2017 at 1:11 PM Ruy Exel <ruyexel@gmail.com> wrote: > Dear Kaushal, > > The real treat is to read your nice message and to be a member of such a > fantastic group of people! > > Following your advice to stick to a stable release I searched for info on > how to install it and I found instructions in > http://orgmode.org/org.html#Installation telling me to run "M-x > package-install RET org RET" from within emacs. I did it and it all looked > like everything was running smoothly untill I was issued the messages: > > WARNING: No org-loaddefs.el file could be found from where org.el is > loaded. You need to run "make" or "make autoloads" from Org lisp directory > Did you add Org Elpa to package archives as described here: http://orgmode.org/elpa.html ? I am used to this since I first tried the cloned git version, but I noticed > that there is no Makefile in the directory containing the newly dowloaded > files (~/.emacs.d/elpa/org-20171113/), so I got stuck. > I haven't installed Org from within Emacs for quite some time now as I build it using make from its git clone. Also I haven't seen the warning that you see. Hopefully someone else can comment on that part. I noticed though that the Org version you quoted: ~/.emacs.d/elpa/org-20171113/ is a bit old (not too old, but not the latest served on Elpa either). If you add the Org Elpa to package-archive as I suggested above, and install using the M-x package-list-packages interface, the archives will first get auto-refreshed, and then you can be rest assured that the installed packages are the latest versions. > I noticed that in the above installation instructions it is mentioned that: > > Important: you need to do this in a session where no .org file has been > visited, i.e., where no Org built-in function have been loaded. Otherwise > autoload Org functions will mess up the installation. > > so I repeated the process right after starting emacs with the > --no-init-files option, then I added the line "(package-initialize)" to my > initialization file but it still does not work, > What doesn't work? You shouldn't need to do --no-init-files. Simply make sure that your config is not doing (require 'org) directly or indirectly somewhere and you are not opening an Org file at emacs startup. That's all. > namely the old org-mode is loaded upon starting emacs. > How are you telling that? If you do M-: (featurep 'org) and it returns nil, it means that org is not yet loaded. > It is curious that I now have two org-mode entries in the top Emacs-Info > node, one for the old version (7.9.3f) and another one for the new one > (9.1.2 (release_9.1.2-37-g3f8d67)). > That's a different thing, has to do with the Info-directory-list variable, and is fine. You can have paths to Info manuals from multiple Org versions added to that var, and so you will see multiple Org manuals. I personally don't like that and so I surgically remove[1] all the Org versions that I am not using in the current emacs session from load-path and Info-directory-list. Could I have premanently messed up my emacs installation by not following > the above Important advice? > Not trying to sound philosophical, but nothing is permanent. All the package installations happen in the elpa dir.. so to start the Org installation from scratch, you can rm -rf all the org installations from the elpa/ dir and restart emacs following that "Important" instruction and retry installing Org. [1]: https://scripter.co/building-org-development-version/ -- Kaushal Modi [-- Attachment #2: Type: text/html, Size: 5527 bytes --] ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Broken org-mode "Column width and alignment" in latest version 2017-12-12 20:53 ` Kaushal Modi @ 2017-12-18 12:57 ` Ruy Exel 2017-12-18 17:37 ` Kaushal Modi 0 siblings, 1 reply; 7+ messages in thread From: Ruy Exel @ 2017-12-18 12:57 UTC (permalink / raw) To: Kaushal Modi; +Cc: emacs-org list Dear Kaushal, It took me a while to digest everything in your message, but I have finally managed to do my home-work and everything is now working perfectly! Thanks very much! Yours, Ruy On Tue, Dec 12, 2017 at 6:53 PM, Kaushal Modi <kaushal.modi@gmail.com> wrote: > On Sat, Dec 9, 2017 at 1:11 PM Ruy Exel <ruyexel@gmail.com> wrote: >> >> Dear Kaushal, >> >> The real treat is to read your nice message and to be a member of such a >> fantastic group of people! >> >> Following your advice to stick to a stable release I searched for info on >> how to install it and I found instructions in >> http://orgmode.org/org.html#Installation telling me to run "M-x >> package-install RET org RET" from within emacs. I did it and it all looked >> like everything was running smoothly untill I was issued the messages: >> >> WARNING: No org-loaddefs.el file could be found from where org.el is >> loaded. You need to run "make" or "make autoloads" from Org lisp directory > > > Did you add Org Elpa to package archives as described here: > http://orgmode.org/elpa.html ? > >> I am used to this since I first tried the cloned git version, but I >> noticed that there is no Makefile in the directory containing the newly >> dowloaded files (~/.emacs.d/elpa/org-20171113/), so I got stuck. > > > I haven't installed Org from within Emacs for quite some time now as I build > it using make from its git clone. Also I haven't seen the warning that you > see. Hopefully someone else can comment on that part. > > I noticed though that the Org version you quoted: > ~/.emacs.d/elpa/org-20171113/ is a bit old (not too old, but not the latest > served on Elpa either). If you add the Org Elpa to package-archive as I > suggested above, and install using the M-x package-list-packages interface, > the archives will first get auto-refreshed, and then you can be rest assured > that the installed packages are the latest versions. > >> >> I noticed that in the above installation instructions it is mentioned >> that: >> >> Important: you need to do this in a session where no .org file has been >> visited, i.e., where no Org built-in function have been loaded. Otherwise >> autoload Org functions will mess up the installation. >> >> so I repeated the process right after starting emacs with the >> --no-init-files option, then I added the line "(package-initialize)" to my >> initialization file but it still does not work, > > > What doesn't work? You shouldn't need to do --no-init-files. Simply make > sure that your config is not doing (require 'org) directly or indirectly > somewhere and you are not opening an Org file at emacs startup. That's all. > >> >> namely the old org-mode is loaded upon starting emacs. > > > How are you telling that? If you do M-: (featurep 'org) and it returns nil, > it means that org is not yet loaded. > >> >> It is curious that I now have two org-mode entries in the top Emacs-Info >> node, one for the old version (7.9.3f) and another one for the new one >> (9.1.2 (release_9.1.2-37-g3f8d67)). > > > That's a different thing, has to do with the Info-directory-list variable, > and is fine. You can have paths to Info manuals from multiple Org versions > added to that var, and so you will see multiple Org manuals. I personally > don't like that and so I surgically remove[1] all the Org versions that I am > not using in the current emacs session from load-path and > Info-directory-list. > >> Could I have premanently messed up my emacs installation by not following >> the above Important advice? > > > Not trying to sound philosophical, but nothing is permanent. All the package > installations happen in the elpa dir.. so to start the Org installation from > scratch, you can rm -rf all the org installations from the elpa/ dir and > restart emacs following that "Important" instruction and retry installing > Org. > > [1]: https://scripter.co/building-org-development-version/ > -- > > Kaushal Modi ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Broken org-mode "Column width and alignment" in latest version 2017-12-18 12:57 ` Ruy Exel @ 2017-12-18 17:37 ` Kaushal Modi 0 siblings, 0 replies; 7+ messages in thread From: Kaushal Modi @ 2017-12-18 17:37 UTC (permalink / raw) To: Ruy Exel; +Cc: emacs-org list [-- Attachment #1: Type: text/plain, Size: 301 bytes --] On Mon, Dec 18, 2017 at 7:57 AM Ruy Exel <ruyexel@gmail.com> wrote: > Dear Kaushal, > > It took me a while to digest everything in your message, but I have > finally managed to do my home-work and everything is now working > perfectly! Thanks very much! > Great! You are welcome. -- Kaushal Modi [-- Attachment #2: Type: text/html, Size: 689 bytes --] ^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2017-12-18 17:37 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-12-08 22:19 Broken org-mode "Column width and alignment" in latest version Ruy Exel
2017-12-08 22:28 ` Kaushal Modi
[not found] ` <CAB8Wf+8JXWuJOrqtumspFak7oW1kcgOoHnbYgPyb7Rk-UC8uZA@mail.gmail.com>
2017-12-09 2:50 ` Kaushal Modi
2017-12-09 18:11 ` Ruy Exel
2017-12-12 20:53 ` Kaushal Modi
2017-12-18 12:57 ` Ruy Exel
2017-12-18 17:37 ` Kaushal Modi
Code repositories for project(s) associated with this public inbox https://git.savannah.gnu.org/cgit/emacs/org-mode.git This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).