* Using noweb with org-mode source @ 2011-01-05 17:59 Phil Branigan 2011-01-05 19:58 ` suvayu ali 2011-01-05 20:17 ` Christian Moe 0 siblings, 2 replies; 6+ messages in thread From: Phil Branigan @ 2011-01-05 17:59 UTC (permalink / raw) To: emacs-orgmode [-- Attachment #1.1: Type: text/plain, Size: 801 bytes --] In making up lecture and teaching materials, I would find it useful to be able to use noweb references to replicate blocks of org-mode text directly, rather than source code from latex or another language. But org-mode isn't one of the babel-supported languages. Can anyone suggest a tricky way to achieve this result? What I have in mind is something like the following: * One section, exported to a particular document #+srcname: primates #+begin_src org-mode - chimps :: strong, smart and savage - bonobos :: less savage, sexy, smart - orangutans :: kinda asocial, with big arms - gorillas :: really strong, but shy #+end_src Lots of text here. * Another section, exported to a different document Let's review what we know about the primate group. <<primates>> -- Phil Branigan [-- Attachment #1.2: Type: text/html, Size: 1114 bytes --] [-- Attachment #2: Type: text/plain, Size: 201 bytes --] _______________________________________________ Emacs-orgmode mailing list Please use `Reply All' to send replies to the list. Emacs-orgmode@gnu.org http://lists.gnu.org/mailman/listinfo/emacs-orgmode ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Using noweb with org-mode source 2011-01-05 17:59 Using noweb with org-mode source Phil Branigan @ 2011-01-05 19:58 ` suvayu ali 2011-01-05 20:17 ` Christian Moe 1 sibling, 0 replies; 6+ messages in thread From: suvayu ali @ 2011-01-05 19:58 UTC (permalink / raw) To: Phil Branigan; +Cc: emacs-orgmode Hi Phil, On Wed, Jan 5, 2011 at 9:59 AM, Phil Branigan <branigan@mun.ca> wrote: > In making up lecture and teaching materials, I would find it useful to be > able to use noweb references to replicate blocks of org-mode text directly, > rather than source code from latex or another language. But org-mode isn't > one of the babel-supported languages. Can anyone suggest a tricky way to > achieve this result? Does this help? http://orgmode.org/manual/Include-files.html#Include-files -- Suvayu Open source is the future. It sets us free. ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Using noweb with org-mode source 2011-01-05 17:59 Using noweb with org-mode source Phil Branigan 2011-01-05 19:58 ` suvayu ali @ 2011-01-05 20:17 ` Christian Moe 2011-01-06 0:08 ` Phil Branigan 2011-01-06 6:24 ` Eric Schulte 1 sibling, 2 replies; 6+ messages in thread From: Christian Moe @ 2011-01-05 20:17 UTC (permalink / raw) To: Phil Branigan; +Cc: emacs-orgmode Hi, This should get you part of the way: Use `org' as the language name, not `org-mode'. Enclose the noweb reference in another src block with noweb explicitly turned on. Reworked example follows. I can't seem to get rid of the code block around it, though, however I play with the header arguments. Yours, Christian * One section, exported to a particular document #+srcname: primates #+begin_src org ,- chimps :: strong, smart and savage ,- bonobos :: less savage, sexy, smart ,- orangutans :: kinda asocial, with big arms ,- gorillas :: really strong, but shy #+end_src Lots of text here. * Another section, exported to a different document Let's review what we know about the primate group. #+begin_src org :noweb yes <<primates>> #+end_src On 1/5/11 6:59 PM, Phil Branigan wrote: > In making up lecture and teaching materials, I would find it useful to > be able to use noweb references to replicate blocks of org-mode text > directly, rather than source code from latex or another language. But > org-mode isn't one of the babel-supported languages. Can anyone > suggest a tricky way to achieve this result? > > What I have in mind is something like the following: > > * One section, exported to a particular document > > #+srcname: primates > #+begin_src org-mode > - chimps :: strong, smart and savage > - bonobos :: less savage, sexy, smart > - orangutans :: kinda asocial, with big arms > - gorillas :: really strong, but shy > #+end_src > > Lots of text here. > > * Another section, exported to a different document > > Let's review what we know about the primate group. > > <<primates>> > > > -- > Phil Branigan > > > > _______________________________________________ > Emacs-orgmode mailing list > Please use `Reply All' to send replies to the list. > Emacs-orgmode@gnu.org > http://lists.gnu.org/mailman/listinfo/emacs-orgmode ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Using noweb with org-mode source 2011-01-05 20:17 ` Christian Moe @ 2011-01-06 0:08 ` Phil Branigan 2011-01-06 6:24 ` Eric Schulte 1 sibling, 0 replies; 6+ messages in thread From: Phil Branigan @ 2011-01-06 0:08 UTC (permalink / raw) To: emacs-orgmode [-- Attachment #1.1: Type: text/plain, Size: 3069 bytes --] Thanks, Suvaya and Christian, Unfortunately, neither of these two suggestions really does what I had hoped. Using INCLUDE files will certainly allow me to reuse my text and export to different documents, but at the cost of cluttering up my directories with a bunch of files which have no other purpose. And the syntax proposed by Christian produces verbatim copies of the org-mode source, instead of allowing me to export the same text at different points in the document. I can achieve what I want already to some extent by using org-tables and the like to generate latex code in a src block. But this obviously doesn't offer a general export solution to other formats, and it's a clunky way of working. It may be that the noweb syntax can't accomodate the kind of src-export-reuse that I'm looking for. - Phil Branigan On Wed, Jan 5, 2011 at 4:47 PM, Christian Moe <mail@christianmoe.com> wrote: > Hi, > > This should get you part of the way: Use `org' as the language name, not > `org-mode'. Enclose the noweb reference in another src block with noweb > explicitly turned on. Reworked example follows. > > I can't seem to get rid of the code block around it, though, however I play > with the header arguments. > > Yours, > Christian > > > > * One section, exported to a particular document > > #+srcname: primates > #+begin_src org > ,- chimps :: strong, smart and savage > > ,- bonobos :: less savage, sexy, smart > ,- orangutans :: kinda asocial, with big arms > ,- gorillas :: really strong, but shy > #+end_src > > Lots of text here. > > * Another section, exported to a different document > > Let's review what we know about the primate group. > > #+begin_src org :noweb yes > <<primates>> > #+end_src > > > On 1/5/11 6:59 PM, Phil Branigan wrote: > >> In making up lecture and teaching materials, I would find it useful to >> be able to use noweb references to replicate blocks of org-mode text >> directly, rather than source code from latex or another language. But >> org-mode isn't one of the babel-supported languages. Can anyone >> suggest a tricky way to achieve this result? >> >> What I have in mind is something like the following: >> >> * One section, exported to a particular document >> >> #+srcname: primates >> #+begin_src org-mode >> - chimps :: strong, smart and savage >> - bonobos :: less savage, sexy, smart >> - orangutans :: kinda asocial, with big arms >> - gorillas :: really strong, but shy >> #+end_src >> >> Lots of text here. >> >> * Another section, exported to a different document >> >> Let's review what we know about the primate group. >> >> <<primates>> >> >> >> -- >> Phil Branigan >> >> >> >> _______________________________________________ >> Emacs-orgmode mailing list >> Please use `Reply All' to send replies to the list. >> Emacs-orgmode@gnu.org >> http://lists.gnu.org/mailman/listinfo/emacs-orgmode >> > > -- Phil Branigan -------------------- Associate Professor Department of Linguistics Memorial University of Newfoundland St. John's, NL, A1B 3X9 Tel. (709) 737-8134 Fax (709) 737-4000 [-- Attachment #1.2: Type: text/html, Size: 4056 bytes --] [-- Attachment #2: Type: text/plain, Size: 201 bytes --] _______________________________________________ Emacs-orgmode mailing list Please use `Reply All' to send replies to the list. Emacs-orgmode@gnu.org http://lists.gnu.org/mailman/listinfo/emacs-orgmode ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Using noweb with org-mode source 2011-01-05 20:17 ` Christian Moe 2011-01-06 0:08 ` Phil Branigan @ 2011-01-06 6:24 ` Eric Schulte 2011-01-06 7:59 ` Christian Moe 1 sibling, 1 reply; 6+ messages in thread From: Eric Schulte @ 2011-01-06 6:24 UTC (permalink / raw) To: mail; +Cc: emacs-orgmode, Phil Branigan Hi Christian, The following should remove the enclosing begin_src org blocks, and results in the org-mode exporting normally, rather than verbatim. Notice the :results header arguments on the last code block, such header arguments can be set on a file-wide basis to reduce code clutter. Best -- Eric * One section, exported to a particular document #+srcname: primates #+begin_src org ,- chimps :: strong, smart and savage ,- bonobos :: less savage, sexy, smart ,- orangutans :: kinda asocial, with big arms ,- gorillas :: really strong, but shy #+end_src Lots of text here. * Another section, exported to a different document Let's review what we know about the primate group. #+begin_src org :noweb yes :results replace raw <<primates>> #+end_src Christian Moe <mail@christianmoe.com> writes: > Hi, > > This should get you part of the way: Use `org' as the language name, > not `org-mode'. Enclose the noweb reference in another src block with > noweb explicitly turned on. Reworked example follows. > > I can't seem to get rid of the code block around it, though, however I > play with the header arguments. > > Yours, > Christian > > > * One section, exported to a particular document > > #+srcname: primates > #+begin_src org > ,- chimps :: strong, smart and savage > ,- bonobos :: less savage, sexy, smart > ,- orangutans :: kinda asocial, with big arms > ,- gorillas :: really strong, but shy > #+end_src > > Lots of text here. > > * Another section, exported to a different document > > Let's review what we know about the primate group. > > #+begin_src org :noweb yes > <<primates>> > #+end_src > > On 1/5/11 6:59 PM, Phil Branigan wrote: >> In making up lecture and teaching materials, I would find it useful to >> be able to use noweb references to replicate blocks of org-mode text >> directly, rather than source code from latex or another language. But >> org-mode isn't one of the babel-supported languages. Can anyone >> suggest a tricky way to achieve this result? >> >> What I have in mind is something like the following: >> >> * One section, exported to a particular document >> >> #+srcname: primates >> #+begin_src org-mode >> - chimps :: strong, smart and savage >> - bonobos :: less savage, sexy, smart >> - orangutans :: kinda asocial, with big arms >> - gorillas :: really strong, but shy >> #+end_src >> >> Lots of text here. >> >> * Another section, exported to a different document >> >> Let's review what we know about the primate group. >> >> <<primates>> >> >> >> -- >> Phil Branigan >> >> >> >> _______________________________________________ >> Emacs-orgmode mailing list >> Please use `Reply All' to send replies to the list. >> Emacs-orgmode@gnu.org >> http://lists.gnu.org/mailman/listinfo/emacs-orgmode > > > _______________________________________________ > Emacs-orgmode mailing list > Please use `Reply All' to send replies to the list. > Emacs-orgmode@gnu.org > http://lists.gnu.org/mailman/listinfo/emacs-orgmode ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Using noweb with org-mode source 2011-01-06 6:24 ` Eric Schulte @ 2011-01-06 7:59 ` Christian Moe 0 siblings, 0 replies; 6+ messages in thread From: Christian Moe @ 2011-01-06 7:59 UTC (permalink / raw) To: Eric Schulte; +Cc: emacs-orgmode, Phil Branigan Hi, Eric, Thanks, it's working now. I had tried ":results raw" before, and perhaps "replace" too. I had dropped them again, because it still didn't work. Why not was forehead-slappingly obvious after a good night's sleep... Hi, Phil, In addition to what Eric writes below (":results replace raw"), you also need to *activate Org as a Babel language.* In your .emacs, you need something like (org-babel-do-load-languages 'org-babel-load-languages '((org . t))) -- with any other languages you need in the same list. Now it should do exactly what you want. Yours, Christian On 1/6/11 7:24 AM, Eric Schulte wrote: > Hi Christian, > > The following should remove the enclosing begin_src org blocks, and > results in the org-mode exporting normally, rather than verbatim. > Notice the :results header arguments on the last code block, such header > arguments can be set on a file-wide basis to reduce code clutter. > > Best -- Eric > > * One section, exported to a particular document > > #+srcname: primates > #+begin_src org > ,- chimps :: strong, smart and savage > ,- bonobos :: less savage, sexy, smart > ,- orangutans :: kinda asocial, with big arms > ,- gorillas :: really strong, but shy > #+end_src > > Lots of text here. > > * Another section, exported to a different document > > Let's review what we know about the primate group. > > #+begin_src org :noweb yes :results replace raw > <<primates>> > #+end_src > > > Christian Moe<mail@christianmoe.com> writes: > >> Hi, >> >> This should get you part of the way: Use `org' as the language name, >> not `org-mode'. Enclose the noweb reference in another src block with >> noweb explicitly turned on. Reworked example follows. >> >> I can't seem to get rid of the code block around it, though, however I >> play with the header arguments. >> >> Yours, >> Christian >> >> >> * One section, exported to a particular document >> >> #+srcname: primates >> #+begin_src org >> ,- chimps :: strong, smart and savage >> ,- bonobos :: less savage, sexy, smart >> ,- orangutans :: kinda asocial, with big arms >> ,- gorillas :: really strong, but shy >> #+end_src >> >> Lots of text here. >> >> * Another section, exported to a different document >> >> Let's review what we know about the primate group. >> >> #+begin_src org :noweb yes >> <<primates>> >> #+end_src >> >> On 1/5/11 6:59 PM, Phil Branigan wrote: >>> In making up lecture and teaching materials, I would find it useful to >>> be able to use noweb references to replicate blocks of org-mode text >>> directly, rather than source code from latex or another language. But >>> org-mode isn't one of the babel-supported languages. Can anyone >>> suggest a tricky way to achieve this result? >>> >>> What I have in mind is something like the following: >>> >>> * One section, exported to a particular document >>> >>> #+srcname: primates >>> #+begin_src org-mode >>> - chimps :: strong, smart and savage >>> - bonobos :: less savage, sexy, smart >>> - orangutans :: kinda asocial, with big arms >>> - gorillas :: really strong, but shy >>> #+end_src >>> >>> Lots of text here. >>> >>> * Another section, exported to a different document >>> >>> Let's review what we know about the primate group. >>> >>> <<primates>> >>> >>> >>> -- >>> Phil Branigan >>> >>> >>> >>> _______________________________________________ >>> Emacs-orgmode mailing list >>> Please use `Reply All' to send replies to the list. >>> Emacs-orgmode@gnu.org >>> http://lists.gnu.org/mailman/listinfo/emacs-orgmode >> >> >> _______________________________________________ >> Emacs-orgmode mailing list >> Please use `Reply All' to send replies to the list. >> Emacs-orgmode@gnu.org >> http://lists.gnu.org/mailman/listinfo/emacs-orgmode > ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2011-01-06 7:56 UTC | newest] Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2011-01-05 17:59 Using noweb with org-mode source Phil Branigan 2011-01-05 19:58 ` suvayu ali 2011-01-05 20:17 ` Christian Moe 2011-01-06 0:08 ` Phil Branigan 2011-01-06 6:24 ` Eric Schulte 2011-01-06 7:59 ` Christian Moe
Code repositories for project(s) associated with this public inbox https://git.savannah.gnu.org/cgit/emacs/org-mode.git This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).