* [bug] canonical context not work in 8.3
@ 2015-08-06 23:10 Samuel Wales
2015-08-07 0:16 ` Nicolas Goaziou
0 siblings, 1 reply; 11+ messages in thread
From: Samuel Wales @ 2015-08-06 23:10 UTC (permalink / raw)
To: emacs-orgmode
(setq org-show-context-detail '((default . canonical))) not work
going from agenda appears to show the first child, and takes
5s or so.
my expectation is that canonical visibility shows no entry
and no children. first child is non-canonical (i.e. cannot
be reproduced with arrows and tab).
reproduces with my -Q testcase on emacs-version "24.4.1" on
recent maint 8.3.
thanks.
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [bug] canonical context not work in 8.3
2015-08-06 23:10 [bug] canonical context not work in 8.3 Samuel Wales
@ 2015-08-07 0:16 ` Nicolas Goaziou
2015-08-07 1:38 ` Samuel Wales
0 siblings, 1 reply; 11+ messages in thread
From: Nicolas Goaziou @ 2015-08-07 0:16 UTC (permalink / raw)
To: Samuel Wales; +Cc: emacs-orgmode
Hello,
Samuel Wales <samologist@gmail.com> writes:
> (setq org-show-context-detail '((default . canonical))) not work
>
> going from agenda appears to show the first child,
This should be fixed in maint. Thank you.
> and takes 5s or so.
Could you provide a profiling report for this?
> my expectation is that canonical visibility shows no entry
> and no children. first child is non-canonical (i.e. cannot
> be reproduced with arrows and tab).
First child only is non-canonical. However, canonical is the state
obtained after hitting TAB on a headline. I think you want `minimal'
instead.
Regards,
--
Nicolas Goaziou
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [bug] canonical context not work in 8.3
2015-08-07 0:16 ` Nicolas Goaziou
@ 2015-08-07 1:38 ` Samuel Wales
2015-08-07 8:45 ` Nicolas Goaziou
0 siblings, 1 reply; 11+ messages in thread
From: Samuel Wales @ 2015-08-07 1:38 UTC (permalink / raw)
To: Samuel Wales, emacs-orgmode
thank you for fixing.
canonical is always what i want, except for occur-tree.
i did profiler-start then went to org file a few times to average out
the results. did i use the correct profiler?
command-execute 60148 99%
- call-interactively 60148 99%
- org-agenda-switch-to 59299 98%
- org-show-context 59299 98%
- org-show-set-visibility 59299 98%
- show-children 59170 97%
- outline-end-of-subtree 35938 59%
outline-next-heading 9399 15%
org-outline-level 4047 6%
- outline-map-region 23168 38%
+ #<compiled 0xfc19ab> 9558 15%
outline-next-heading 7399 12%
+ org-up-heading-safe 117 0%
+ org-show-entry 4 0%
+ org-flag-heading 4 0%
On 8/6/15, Nicolas Goaziou <mail@nicolasgoaziou.fr> wrote:
> Hello,
>
> Samuel Wales <samologist@gmail.com> writes:
>
>> (setq org-show-context-detail '((default . canonical))) not work
>>
>> going from agenda appears to show the first child,
>
> This should be fixed in maint. Thank you.
>
>> and takes 5s or so.
>
> Could you provide a profiling report for this?
>
>> my expectation is that canonical visibility shows no entry
>> and no children. first child is non-canonical (i.e. cannot
>> be reproduced with arrows and tab).
>
> First child only is non-canonical. However, canonical is the state
> obtained after hitting TAB on a headline. I think you want `minimal'
> instead.
>
>
> Regards,
>
> --
> Nicolas Goaziou
>
--
The Kafka Pandemic: http://thekafkapandemic.blogspot.com
Ramsay's disease DOES progress. MANY people have died from it. And
ANYBODY can get it.
Denmark: free Karina Hansen NOW.
^ permalink raw reply [flat|nested] 11+ messages in thread* Re: [bug] canonical context not work in 8.3
2015-08-07 1:38 ` Samuel Wales
@ 2015-08-07 8:45 ` Nicolas Goaziou
2015-08-07 20:27 ` Samuel Wales
0 siblings, 1 reply; 11+ messages in thread
From: Nicolas Goaziou @ 2015-08-07 8:45 UTC (permalink / raw)
To: Samuel Wales; +Cc: emacs-orgmode
Samuel Wales <samologist@gmail.com> writes:
> thank you for fixing.
>
> canonical is always what i want, except for occur-tree.
>
> i did profiler-start then went to org file a few times to average out
> the results. did i use the correct profiler?
You did.
>
> command-execute 60148 99%
> - call-interactively 60148 99%
> - org-agenda-switch-to 59299 98%
> - org-show-context 59299 98%
> - org-show-set-visibility 59299 98%
> - show-children 59170 97%
> - outline-end-of-subtree 35938 59%
> outline-next-heading 9399 15%
> org-outline-level 4047 6%
> - outline-map-region 23168 38%
> + #<compiled 0xfc19ab> 9558 15%
> outline-next-heading 7399 12%
> + org-up-heading-safe 117 0%
> + org-show-entry 4 0%
> + org-flag-heading 4 0%
`show-children' is the culprit.
Could you evaluate the following function and time it again?
(defun show-children (&optional level)
(save-excursion
(org-back-to-heading t)
(let* ((current-level (funcall outline-level))
(level (if level (+ (prefix-numeric-value level) current-level)
(save-excursion
(outline-next-heading)
(if (eobp) current-level (funcall outline-level))))))
(org-map-region
(lambda ()
(when (<= (funcall outline-level) level)
(outline-flag-region (if (bobp) (point) (1- (point)))
(line-end-position)
nil)))
(point)
(org-end-of-subtree t t)))))
Thank you.
Regards,
^ permalink raw reply [flat|nested] 11+ messages in thread* Re: [bug] canonical context not work in 8.3
2015-08-07 8:45 ` Nicolas Goaziou
@ 2015-08-07 20:27 ` Samuel Wales
2015-08-08 8:07 ` Nicolas Goaziou
0 siblings, 1 reply; 11+ messages in thread
From: Samuel Wales @ 2015-08-07 20:27 UTC (permalink / raw)
To: Samuel Wales, emacs-orgmode
thank you.
i compiled it and tried it. it seems improved, to maybe 2.5s.
- command-execute 17977 99%
- call-interactively 17977 99%
- org-agenda-switch-to 16144 88%
- org-show-context 16142 88%
- org-show-set-visibility 16142 88%
- show-children 16042 88%
- org-map-region 15617 86%
- #<compiled 0x1220ff9> 6905 38%
org-outline-level 1780 9%
- outline-flag-region 12 0%
remove-overlays 4 0%
outline-next-heading 4381 24%
org-end-of-subtree 401 2%
org-up-heading-safe 72 0%
- org-show-entry 16 0%
+ byte-code 16 0%
+ org-flag-heading 4 0%
org-mark-ring-push 2 0%
- #<compiled 0xc259e3> 1189 6%
- org-agenda 1189 6%
- byte-code 1189 6%
- org-let 1189 6%
- eval 1189 6%
- let 1189 6%
- org-agenda-list 1189 6%
- byte-code 1185 6%
- org-agenda-prepare 625 3%
- org-agenda-prepare-buffers 618 3%
- byte-code 618 3%
+ org-refresh-category-properties 262 1%
+ org-refresh-stats-properties 184 1%
+ org-set-regexps-and-options 40 0%
+ org-refresh-effort-properties 36 0%
org-refresh-properties 32 0%
+ byte-code 440 2%
+ org-agenda-finalize-entries 104 0%
+ org-agenda-finalize 8 0%
- org-agenda-next-line 287 1%
- org-agenda-do-context-action 273 1%
- org-display-outline-path 273 1%
+ org-get-outline-path 241 1%
+ org-unlogged-message 24 0%
+ org-format-outline-path 8 0%
+ call-interactively 13 0%
+ ido-hacks-execute-extended-command 189 1%
On 8/7/15, Nicolas Goaziou <mail@nicolasgoaziou.fr> wrote:
> Samuel Wales <samologist@gmail.com> writes:
>
>> thank you for fixing.
>>
>> canonical is always what i want, except for occur-tree.
>>
>> i did profiler-start then went to org file a few times to average out
>> the results. did i use the correct profiler?
>
> You did.
>>
>> command-execute 60148 99%
>> - call-interactively 60148
>> 99%
>> - org-agenda-switch-to 59299
>> 98%
>> - org-show-context 59299
>> 98%
>> - org-show-set-visibility 59299
>> 98%
>> - show-children 59170
>> 97%
>> - outline-end-of-subtree 35938
>> 59%
>> outline-next-heading 9399
>> 15%
>> org-outline-level 4047
>> 6%
>> - outline-map-region 23168
>> 38%
>> + #<compiled 0xfc19ab> 9558
>> 15%
>> outline-next-heading 7399
>> 12%
>> + org-up-heading-safe 117
>> 0%
>> + org-show-entry 4
>> 0%
>> + org-flag-heading 4
>> 0%
>
> `show-children' is the culprit.
>
> Could you evaluate the following function and time it again?
>
> (defun show-children (&optional level)
> (save-excursion
> (org-back-to-heading t)
> (let* ((current-level (funcall outline-level))
> (level (if level (+ (prefix-numeric-value level)
> current-level)
> (save-excursion
> (outline-next-heading)
> (if (eobp) current-level (funcall
> outline-level))))))
> (org-map-region
> (lambda ()
> (when (<= (funcall outline-level) level)
> (outline-flag-region (if (bobp) (point) (1- (point)))
> (line-end-position)
> nil)))
> (point)
> (org-end-of-subtree t t)))))
>
> Thank you.
>
>
> Regards,
>
--
The Kafka Pandemic: http://thekafkapandemic.blogspot.com
Ramsay's disease DOES progress. MANY people have died from it. And
ANYBODY can get it.
Denmark: free Karina Hansen NOW.
^ permalink raw reply [flat|nested] 11+ messages in thread* Re: [bug] canonical context not work in 8.3
2015-08-07 20:27 ` Samuel Wales
@ 2015-08-08 8:07 ` Nicolas Goaziou
2015-08-08 9:19 ` Nicolas Goaziou
0 siblings, 1 reply; 11+ messages in thread
From: Nicolas Goaziou @ 2015-08-08 8:07 UTC (permalink / raw)
To: Samuel Wales; +Cc: emacs-orgmode
Samuel Wales <samologist@gmail.com> writes:
> i compiled it and tried it. it seems improved, to maybe 2.5s.
I think it is as good as it can get. You probably have an awful lot of
children to display.
Anyway, could you provide the same report using an un-compiled Org?
A report using ELP (elp-instrument-package and elp-report) would be nice
too, as it gives the number of times a function is called.
Regards,
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [bug] canonical context not work in 8.3
2015-08-08 8:07 ` Nicolas Goaziou
@ 2015-08-08 9:19 ` Nicolas Goaziou
2015-08-09 18:53 ` Samuel Wales
0 siblings, 1 reply; 11+ messages in thread
From: Nicolas Goaziou @ 2015-08-08 9:19 UTC (permalink / raw)
To: Samuel Wales; +Cc: emacs-orgmode
Correcting myself,
> I think it is as good as it can get. You probably have an awful lot of
> children to display.
This one may improve the situation:
(defun show-children (&optional level)
(save-excursion
(org-back-to-heading t)
(let* ((current-level (funcall outline-level))
(level (if level (+ (prefix-numeric-value level) current-level)
(save-excursion
(outline-next-heading)
(if (eobp) current-level (funcall outline-level)))))
(re (format "^\\*\\{%d,%d\\} +" current-level level))
(end (save-excursion (org-end-of-subtree t t))))
(while (re-search-forward re end t)
(outline-flag-region (line-end-position 0) (line-end-position) nil)))))
Would you mind testing it?
Regards,
^ permalink raw reply [flat|nested] 11+ messages in thread* Re: [bug] canonical context not work in 8.3
2015-08-08 9:19 ` Nicolas Goaziou
@ 2015-08-09 18:53 ` Samuel Wales
2015-08-10 11:39 ` Nicolas Goaziou
0 siblings, 1 reply; 11+ messages in thread
From: Samuel Wales @ 2015-08-09 18:53 UTC (permalink / raw)
To: Samuel Wales, emacs-orgmode
thank you. this version is significantly faster. qualitatively
improved.
it has a possibly minor bug.
evalled as source:
- command-execute 8072 98%
- call-interactively 8072 98%
- org-agenda-switch-to 7595 92%
- org-show-context 7595 92%
- org-show-set-visibility 7595 92%
- show-children 7039 86%
- save-excursion 7015 85%
- let* 7015 85%
- while 4832 59%
- outline-flag-region 692 8%
remove-overlays 12 0%
- save-excursion 2179 26%
org-end-of-subtree 2179 26%
- funcall 4 0%
org-outline-level 4 0%
however, if the next heading has fewer stars, it errors:
Debugger entered--Lisp error: (invalid-regexp "Invalid content of \\{\\}")
re-search-forward("^\\*\\{27,13\\} +" 2473493 t)
(while (re-search-forward re end t) (outline-flag-region
(line-end-position 0) (line-end-position) nil))
(let* ((current-level (funcall outline-level)) (level (if level (+
(prefix-numeric-value level) current-level) (save-excursion
(outline-next-heading) (if (eobp) current-level (funcall
outline-level))))) (re (format "^\\*\\{%d,%d\\} +" current-level
level)) (end (save-excursion (org-end-of-subtree t t)))) (while
(re-search-forward re end t) (outline-flag-region (line-end-position
0) (line-end-position) nil)))
(save-excursion (org-back-to-heading t) (let* ((current-level
(funcall outline-level)) (level (if level (+ (prefix-numeric-value
level) current-level) (save-excursion (outline-next-heading) (if
(eobp) current-level (funcall outline-level))))) (re (format
"^\\*\\{%d,%d\\} +" current-level level)) (end (save-excursion
(org-end-of-subtree t t)))) (while (re-search-forward re end t)
(outline-flag-region (line-end-position 0) (line-end-position) nil))))
show-children()
org-show-set-visibility(canonical)
org-show-context(agenda)
org-agenda-switch-to()
call-interactively(org-agenda-switch-to nil nil)
command-execute(org-agenda-switch-to)
(defun show-children (&optional level)
(save-excursion
(org-back-to-heading t)
(let* ((current-level (funcall outline-level))
(level (if level (+ (prefix-numeric-value level) current-level)
(save-excursion
(outline-next-heading)
(if (eobp) current-level (funcall outline-level)))))
(re (format "^\\*\\{%d,%d\\} +" current-level level))
(end (save-excursion (org-end-of-subtree t t))))
(while (re-search-forward re end t)
(outline-flag-region (line-end-position 0)
(line-end-position) nil)))))
On 8/8/15, Nicolas Goaziou <mail@nicolasgoaziou.fr> wrote:
> This one may improve the situation:
^ permalink raw reply [flat|nested] 11+ messages in thread* Re: [bug] canonical context not work in 8.3
2015-08-09 18:53 ` Samuel Wales
@ 2015-08-10 11:39 ` Nicolas Goaziou
2015-08-10 18:31 ` Samuel Wales
0 siblings, 1 reply; 11+ messages in thread
From: Nicolas Goaziou @ 2015-08-10 11:39 UTC (permalink / raw)
To: Samuel Wales; +Cc: emacs-orgmode
Samuel Wales <samologist@gmail.com> writes:
> thank you. this version is significantly faster. qualitatively
> improved.
>
> it has a possibly minor bug.
Yes, this was a draft anyway.
I pushed the new function to code base. However, due to the nature of
the change, it landed in master. So it will be available in Org 8.4.
Thank you.
Regards,
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [bug] canonical context not work in 8.3
2015-08-10 11:39 ` Nicolas Goaziou
@ 2015-08-10 18:31 ` Samuel Wales
2015-08-10 21:39 ` Nicolas Goaziou
0 siblings, 1 reply; 11+ messages in thread
From: Samuel Wales @ 2015-08-10 18:31 UTC (permalink / raw)
To: Samuel Wales, emacs-orgmode
On 8/10/15, Nicolas Goaziou <mail@nicolasgoaziou.fr> wrote:
> I pushed the new function to code base. However, due to the nature of
> the change, it landed in master. So it will be available in Org 8.4.
thank you. will it work in 8.3 (maint) if i load it after loading org?
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [bug] canonical context not work in 8.3
2015-08-10 18:31 ` Samuel Wales
@ 2015-08-10 21:39 ` Nicolas Goaziou
0 siblings, 0 replies; 11+ messages in thread
From: Nicolas Goaziou @ 2015-08-10 21:39 UTC (permalink / raw)
To: Samuel Wales; +Cc: emacs-orgmode
Samuel Wales <samologist@gmail.com> writes:
> On 8/10/15, Nicolas Goaziou <mail@nicolasgoaziou.fr> wrote:
>> I pushed the new function to code base. However, due to the nature of
>> the change, it landed in master. So it will be available in Org 8.4.
>
> thank you. will it work in 8.3 (maint) if i load it after loading
> org?
If you don't plan to use "outline.el", you can override `show-children'
with the following:
--8<---------------cut here---------------start------------->8---
(defun show-children (&optional level)
"Show all direct subheadings of this heading.
Prefix arg LEVEL is how many levels below the current level should be shown.
Default is enough to cause the following heading to appear."
(save-excursion
(org-back-to-heading t)
(let* ((current-level (funcall outline-level))
(max-level (org-get-valid-level
current-level (if level (prefix-numeric-value level) 1)))
(end (save-excursion (org-end-of-subtree t t)))
(regexp-fmt "^\\*\\{%d,%s\\}\\(?: \\|$\\)")
(past-first-child nil)
;; Make sure to skip inlinetasks.
(re (format regexp-fmt
current-level
(cond
((not (featurep 'org-inlinetask)) "")
(org-odd-levels-only (- (* 2 org-inlinetask-min-level)
3))
(t (1- org-inlinetask-min-level))))))
;; Display parent heading.
(outline-flag-region (line-end-position 0) (line-end-position) nil)
(forward-line)
;; Display children. First child may be deeper than expected
;; MAX-LEVEL. Since we want to display it anyway, adjust
;; MAX-LEVEL accordingly.
(while (re-search-forward re end t)
(unless past-first-child
(setq re (format regexp-fmt
current-level
(max (funcall outline-level) max-level)))
(setq past-first-child t))
(outline-flag-region (line-end-position 0) (line-end-position) nil)))))
--8<---------------cut here---------------end--------------->8---
However, the patch that landed in master implements `org-show-children'
instead.
Regards,
^ permalink raw reply [flat|nested] 11+ messages in thread
end of thread, other threads:[~2015-08-10 21:38 UTC | newest]
Thread overview: 11+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-08-06 23:10 [bug] canonical context not work in 8.3 Samuel Wales
2015-08-07 0:16 ` Nicolas Goaziou
2015-08-07 1:38 ` Samuel Wales
2015-08-07 8:45 ` Nicolas Goaziou
2015-08-07 20:27 ` Samuel Wales
2015-08-08 8:07 ` Nicolas Goaziou
2015-08-08 9:19 ` Nicolas Goaziou
2015-08-09 18:53 ` Samuel Wales
2015-08-10 11:39 ` Nicolas Goaziou
2015-08-10 18:31 ` Samuel Wales
2015-08-10 21:39 ` Nicolas Goaziou
Code repositories for project(s) associated with this public inbox
https://git.savannah.gnu.org/cgit/emacs/org-mode.git
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).