emacs-orgmode@gnu.org archives
 help / color / mirror / code / Atom feed
* Problems with babel reading Japanese paths in Windows
@ 2022-03-11  7:47 Jonathan Nogueira
  2022-03-12 12:48 ` Ihor Radchenko
  0 siblings, 1 reply; 4+ messages in thread
From: Jonathan Nogueira @ 2022-03-11  7:47 UTC (permalink / raw)
  To: emacs-orgmode

[-- Attachment #1: Type: text/plain, Size: 671 bytes --]

Hi all,

I've been working with emacs and org on Windows 10.0.19042 and was recently
trying to get babel to produce plantuml diagrams.

I've managed to (I think) narrow the issue down to Babel either not being
able to read/write Japanese paths to shell commands, as when I attempt to
build the diagrams in folders with only ASCII paths, they build fine, but
when babel attempts to execute any source code for paths that contain
Japanese characters, babel gives back the cmd error "The System Cannot Find
the Path Specified."

I'm assuming this is a string quotation problem or something similar but
I'm not sure where to look to fix this.

-- 
Thanks,

Jonathan Nogueira

[-- Attachment #2: Type: text/html, Size: 1010 bytes --]

^ permalink raw reply	[flat|nested] 4+ messages in thread

* Re: Problems with babel reading Japanese paths in Windows
  2022-03-11  7:47 Problems with babel reading Japanese paths in Windows Jonathan Nogueira
@ 2022-03-12 12:48 ` Ihor Radchenko
  2022-03-14 12:16   ` Jonathan Nogueira
  0 siblings, 1 reply; 4+ messages in thread
From: Ihor Radchenko @ 2022-03-12 12:48 UTC (permalink / raw)
  To: Jonathan Nogueira; +Cc: emacs-orgmode

Jonathan Nogueira <jontnog@gmail.com> writes:

> Hi all,
>
> I've been working with emacs and org on Windows 10.0.19042 and was recently
> trying to get babel to produce plantuml diagrams.
>
> I've managed to (I think) narrow the issue down to Babel either not being
> able to read/write Japanese paths to shell commands, as when I attempt to
> build the diagrams in folders with only ASCII paths, they build fine, but
> when babel attempts to execute any source code for paths that contain
> Japanese characters, babel gives back the cmd error "The System Cannot Find
> the Path Specified."

I do not use Windows, but I recall somewhat relevant discussion on
planuml recently:
https://orgmode.org/list/5d7eba13-b717-a12a-5f89-7d2c9414917e@gmail.com

It seems that plantuml might have some issues with UTF unless you pass
relevant command line args.

Did you try to run plantuml manually from windows cmd using the
problematic path?

Best,
Ihor


^ permalink raw reply	[flat|nested] 4+ messages in thread

* Re: Problems with babel reading Japanese paths in Windows
  2022-03-12 12:48 ` Ihor Radchenko
@ 2022-03-14 12:16   ` Jonathan Nogueira
  2022-03-21  7:12     ` Ihor Radchenko
  0 siblings, 1 reply; 4+ messages in thread
From: Jonathan Nogueira @ 2022-03-14 12:16 UTC (permalink / raw)
  To: Ihor Radchenko; +Cc: emacs-orgmode

[-- Attachment #1: Type: text/plain, Size: 1315 bytes --]

 I did and it seems to work fine, I also tested this using plantuml-mode's
normal compliation procedure.

This seems to specifically be a problem with org-mode and babel's
compilation

Thanks for your help!

On Sat, Mar 12, 2022 at 9:49 PM Ihor Radchenko <yantar92@gmail.com> wrote:

> Jonathan Nogueira <jontnog@gmail.com> writes:
>
> > Hi all,
> >
> > I've been working with emacs and org on Windows 10.0.19042 and was
> recently
> > trying to get babel to produce plantuml diagrams.
> >
> > I've managed to (I think) narrow the issue down to Babel either not being
> > able to read/write Japanese paths to shell commands, as when I attempt to
> > build the diagrams in folders with only ASCII paths, they build fine, but
> > when babel attempts to execute any source code for paths that contain
> > Japanese characters, babel gives back the cmd error "The System Cannot
> Find
> > the Path Specified."
>
> I do not use Windows, but I recall somewhat relevant discussion on
> planuml recently:
> https://orgmode.org/list/5d7eba13-b717-a12a-5f89-7d2c9414917e@gmail.com
>
> It seems that plantuml might have some issues with UTF unless you pass
> relevant command line args.
>
> Did you try to run plantuml manually from windows cmd using the
> problematic path?
>
> Best,
> Ihor
>


-- 
Thanks,

Jonathan Nogueira

[-- Attachment #2: Type: text/html, Size: 2136 bytes --]

^ permalink raw reply	[flat|nested] 4+ messages in thread

* Re: Problems with babel reading Japanese paths in Windows
  2022-03-14 12:16   ` Jonathan Nogueira
@ 2022-03-21  7:12     ` Ihor Radchenko
  0 siblings, 0 replies; 4+ messages in thread
From: Ihor Radchenko @ 2022-03-21  7:12 UTC (permalink / raw)
  To: Jonathan Nogueira; +Cc: emacs-orgmode

Jonathan Nogueira <jontnog@gmail.com> writes:

>  I did and it seems to work fine, I also tested this using plantuml-mode's
> normal compliation procedure.
>
> This seems to specifically be a problem with org-mode and babel's
> compilation

Then, could you provide an example source block and the command line
emitted as a message (check *Messages* buffer)?

The command line should look like
/usr/bin/plantuml -headless -tsvg -p  < /tmp/babel-ZAByvH/plantuml-u8GI9c > /home/yantar92/.data/f3/a91376-6b63-4112-b998-e6740b72333e/test.svg

Once you find the command line, also check the contents of
/tmp/babel-ZAByvH/plantuml-u8GI9c (it will be a different file in your
case) and share the contents here.

Best,
Ihor


^ permalink raw reply	[flat|nested] 4+ messages in thread

end of thread, other threads:[~2022-03-21  7:14 UTC | newest]

Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-03-11  7:47 Problems with babel reading Japanese paths in Windows Jonathan Nogueira
2022-03-12 12:48 ` Ihor Radchenko
2022-03-14 12:16   ` Jonathan Nogueira
2022-03-21  7:12     ` Ihor Radchenko

Code repositories for project(s) associated with this inbox:

	https://git.savannah.gnu.org/cgit/emacs/org-mode.git

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).