* Worg migration complete
@ 2011-12-01 18:02 Jason Dunsmore
2011-12-10 15:32 ` Bastien
0 siblings, 1 reply; 7+ messages in thread
From: Jason Dunsmore @ 2011-12-01 18:02 UTC (permalink / raw)
To: emacs-orgmode
Worg contributors,
The Worg git repository migration to the org server is complete. To
contribute, you'll need to send your public SSH key to Bastien or I.
Then, once you receive confirmation that the key has been added, edit
your worg/.git/config file and set the remote URL to
worg@orgmode.org:worg.git OR delete your old repo and run:
git clone worg@orgmode.org:worg.git
I've set up a new Worg publishing process which is triggered as soon as
a commit is pushed. You'll see the output from the emacs process in
your terminal (should aid in debugging export issues). The changes will
be available on the Worg site immediately.
I've updated http://orgmode.org/worg/worg-setup.html. Please let me
know if you find any out-dated Worg documentation.
You can browse the worg repo at:
http://orgmode.org/w/?p=worg.git;a=summary
Read-only git access for the worg repo is available via:
git clone git://orgmode.org/worg.git
Regards,
Jason
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Worg migration complete
2011-12-01 18:02 Worg migration complete Jason Dunsmore
@ 2011-12-10 15:32 ` Bastien
2011-12-10 17:11 ` Achim Gratz
0 siblings, 1 reply; 7+ messages in thread
From: Bastien @ 2011-12-10 15:32 UTC (permalink / raw)
To: Jason Dunsmore; +Cc: emacs-orgmode
Dear all,
thanks a lot to Jason for taking care of Worg's migration.
We also migrated all public keys from repo.or.cz to orgmode.org:
so people who had push access to Worg can push without bothering
about sending their public key again. Just do:
~$ git clone worg@orgmode.org:worg.git
Thanks to Tycho Garen for this! And to all repo.or.cz admins
for their continuous support.
--
Bastien
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Worg migration complete
2011-12-10 15:32 ` Bastien
@ 2011-12-10 17:11 ` Achim Gratz
2011-12-10 17:39 ` Bastien
2011-12-10 19:05 ` Nick Dokos
0 siblings, 2 replies; 7+ messages in thread
From: Achim Gratz @ 2011-12-10 17:11 UTC (permalink / raw)
To: emacs-orgmode
Bastien <bzg@altern.org> writes:
> We also migrated all public keys from repo.or.cz to orgmode.org:
> so people who had push access to Worg can push without bothering
> about sending their public key again. Just do:
>
> ~$ git clone worg@orgmode.org:worg.git
That does not seem to work for me, how to proceeed?
Cloning into 'worg.test'...
Permission denied (publickey).
fatal: The remote end hung up unexpectedly
I've tried both "worg" as user name and my username from repo.or.cz, but
get the same error. Cloning the repo via the public interface (not ssh)
works well, thank you.
Regards,
Achim.
--
+<[Q+ Matrix-12 WAVE#46+305 Neuron microQkb Andromeda XTk Blofeld]>+
Wavetables for the Terratec KOMPLEXER:
http://Synth.Stromeko.net/Downloads.html#KomplexerWaves
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Worg migration complete
2011-12-10 17:11 ` Achim Gratz
@ 2011-12-10 17:39 ` Bastien
2011-12-10 19:05 ` Nick Dokos
1 sibling, 0 replies; 7+ messages in thread
From: Bastien @ 2011-12-10 17:39 UTC (permalink / raw)
To: Achim Gratz; +Cc: emacs-orgmode
Achim Gratz <Stromeko@nexgo.de> writes:
> That does not seem to work for me, how to proceeed?
Please resend your public key to Jason or to me, we will
add it if it has not been copied (some keys maybe be missing.)
Thanks!
--
Bastien
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Worg migration complete
2011-12-10 17:11 ` Achim Gratz
2011-12-10 17:39 ` Bastien
@ 2011-12-10 19:05 ` Nick Dokos
2011-12-10 22:21 ` Achim Gratz
1 sibling, 1 reply; 7+ messages in thread
From: Nick Dokos @ 2011-12-10 19:05 UTC (permalink / raw)
To: Achim Gratz; +Cc: nicholas.dokos, emacs-orgmode
Achim Gratz <Stromeko@nexgo.de> wrote:
> Bastien <bzg@altern.org> writes:
> > We also migrated all public keys from repo.or.cz to orgmode.org:
> > so people who had push access to Worg can push without bothering
> > about sending their public key again. Just do:
> >
> > ~$ git clone worg@orgmode.org:worg.git
>
> That does not seem to work for me, how to proceeed?
>
> Cloning into 'worg.test'...
> Permission denied (publickey).
> fatal: The remote end hung up unexpectedly
>
> I've tried both "worg" as user name and my username from repo.or.cz, but
> get the same error. Cloning the repo via the public interface (not ssh)
> works well, thank you.
>
... but then you'll encounter problems when you try to push, right?
Nick
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Worg migration complete
2011-12-10 19:05 ` Nick Dokos
@ 2011-12-10 22:21 ` Achim Gratz
2011-12-15 12:41 ` Martyn Jago
0 siblings, 1 reply; 7+ messages in thread
From: Achim Gratz @ 2011-12-10 22:21 UTC (permalink / raw)
To: emacs-orgmode
Nick Dokos <nicholas.dokos@hp.com> writes:
> ... but then you'll encounter problems when you try to push, right?
Yes. It's sorted now, thanks to Jason. First there was some bogus
newlines in the authentication file of the server, so some keys were not
recognized. The remote to push to must be
worg@orgmode.org:worg.git
Alternatively, in URL syntax that is
git+ssh://worg@orgmode.org/~/worg.git
The crucial part is the "~", otherwise it'd search the repository in the
root directory. Since I pull via the public interface to avoid the
overhead of an encrypted connection unless it is really needed, I've put
[url "git+ssh://worg@orgmode.org/~/"]
pushInsteadOf = git://orgmode.org/
in my global .gitconfig; you could also have that in the repository
config or configure separate pull and push URL for the remote.
Regards,
Achim.
--
+<[Q+ Matrix-12 WAVE#46+305 Neuron microQkb Andromeda XTk Blofeld]>+
Samples for the Waldorf Blofeld:
http://Synth.Stromeko.net/Downloads.html#BlofeldSamplesExtra
^ permalink raw reply [flat|nested] 7+ messages in thread* Re: Worg migration complete
2011-12-10 22:21 ` Achim Gratz
@ 2011-12-15 12:41 ` Martyn Jago
0 siblings, 0 replies; 7+ messages in thread
From: Martyn Jago @ 2011-12-15 12:41 UTC (permalink / raw)
To: emacs-orgmode
Hi Jason
Achim Gratz <Stromeko@nexgo.de> writes:
> Nick Dokos <nicholas.dokos@hp.com> writes:
>> ... but then you'll encounter problems when you try to push, right?
>
> Yes. It's sorted now, thanks to Jason. First there was some bogus
> newlines in the authentication file of the server, so some keys were not
> recognized. The remote to push to must be
>
> worg@orgmode.org:worg.git
>
> Alternatively, in URL syntax that is
>
> git+ssh://worg@orgmode.org/~/worg.git
>
> The crucial part is the "~", otherwise it'd search the repository in the
> root directory. Since I pull via the public interface to avoid the
> overhead of an encrypted connection unless it is really needed, I've put
>
> [url "git+ssh://worg@orgmode.org/~/"]
> pushInsteadOf = git://orgmode.org/
>
> in my global .gitconfig; you could also have that in the repository
> config or configure separate pull and push URL for the remote.
>
>
> Regards,
> Achim.
The relocation of Worg has proved to be very painless for me, and I
really like the new `instant publishing' feature, which works great!
Thanks for your time and effort on these changes.
Best, Martyn
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2011-12-15 12:45 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2011-12-01 18:02 Worg migration complete Jason Dunsmore
2011-12-10 15:32 ` Bastien
2011-12-10 17:11 ` Achim Gratz
2011-12-10 17:39 ` Bastien
2011-12-10 19:05 ` Nick Dokos
2011-12-10 22:21 ` Achim Gratz
2011-12-15 12:41 ` Martyn Jago
Code repositories for project(s) associated with this public inbox
https://git.savannah.gnu.org/cgit/emacs/org-mode.git
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).