* Updated syntax for #+bind and no LaTeX \maketitle command?
@ 2013-05-23 22:48 John Hendy
2013-05-23 22:57 ` Marcin Borkowski
` (2 more replies)
0 siblings, 3 replies; 7+ messages in thread
From: John Hendy @ 2013-05-23 22:48 UTC (permalink / raw)
To: emacs-orgmode
I sometimes don't want a title in my LaTeX exported documents and used to use:
#+bind: org-export-latex-title-command ""
in my documents. I see that the new variable is simply
=org-latex-title-command= and now have:
#+bind: org-latex-title-command ""
This is still generating a \maketitle line in my .tex file.
What's the proper way to do this on Org 8.0?
Thanks!
John
^ permalink raw reply [flat|nested] 7+ messages in thread* Re: Updated syntax for #+bind and no LaTeX \maketitle command?
2013-05-23 22:48 Updated syntax for #+bind and no LaTeX \maketitle command? John Hendy
@ 2013-05-23 22:57 ` Marcin Borkowski
2013-05-23 23:14 ` Rasmus
2013-05-24 5:47 ` Nick Dokos
2 siblings, 0 replies; 7+ messages in thread
From: Marcin Borkowski @ 2013-05-23 22:57 UTC (permalink / raw)
To: emacs-orgmode
Dnia 2013-05-23, o godz. 17:48:59
John Hendy <jw.hendy@gmail.com> napisał(a):
> I sometimes don't want a title in my LaTeX exported documents and
> used to use:
>
> #+bind: org-export-latex-title-command ""
>
> in my documents. I see that the new variable is simply
> =org-latex-title-command= and now have:
>
> #+bind: org-latex-title-command ""
>
> This is still generating a \maketitle line in my .tex file.
>
> What's the proper way to do this on Org 8.0?
>
>
> Thanks!
> John
>
Hi John,
with the caveat that I don't use Org exporter, so I'm not sure whether
this will help: a (dirty) TeX trick would be to say
\let\maketitle=\relax somewhere in the preamble. (\relax is TeX's
no-op.)
Best,
--
Marcin Borkowski
http://octd.wmi.amu.edu.pl/en/Marcin_Borkowski
Adam Mickiewicz University
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Updated syntax for #+bind and no LaTeX \maketitle command?
2013-05-23 22:48 Updated syntax for #+bind and no LaTeX \maketitle command? John Hendy
2013-05-23 22:57 ` Marcin Borkowski
@ 2013-05-23 23:14 ` Rasmus
2013-05-24 5:47 ` Nick Dokos
2 siblings, 0 replies; 7+ messages in thread
From: Rasmus @ 2013-05-23 23:14 UTC (permalink / raw)
To: emacs-orgmode
John Hendy <jw.hendy@gmail.com> writes:
> I sometimes don't want a title in my LaTeX exported documents and used to use:
>
> #+bind: org-export-latex-title-command ""
>
> in my documents. I see that the new variable is simply
> =org-latex-title-command= and now have:
>
> #+bind: org-latex-title-command ""
>
> This is still generating a \maketitle line in my .tex file.
Does either of solutions work in your case?
#+BEGIN_SRC org
#+TITLE:
* My document without title
. . . By setting TITLE to nil
#+END_SRC
#+BEGIN_SRC org
#+TITLE: my-title
#+BEGIN_SRC emacs-lisp :exports none
(set (make-local-variable 'org-latex-title-command) "")
#+END_SRC
* My document without title
. . . By changing the command with babel
#+END_SRC
#+BEGIN_SRC org
#+TITLE: with title
#+BEGIN_SRC emacs-lisp :exports results
(set (make-local-variable 'org-export-allow-bind-keywords) t)
#+END_SRC
#+BIND: org-latex-title-command ""
* without title
using and allowing bind.
#+END_SRC
--
I almost cut my hair, it happened just the other day
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Updated syntax for #+bind and no LaTeX \maketitle command?
2013-05-23 22:48 Updated syntax for #+bind and no LaTeX \maketitle command? John Hendy
2013-05-23 22:57 ` Marcin Borkowski
2013-05-23 23:14 ` Rasmus
@ 2013-05-24 5:47 ` Nick Dokos
2013-05-24 6:36 ` Nick Dokos
2 siblings, 1 reply; 7+ messages in thread
From: Nick Dokos @ 2013-05-24 5:47 UTC (permalink / raw)
To: emacs-orgmode
John Hendy <jw.hendy@gmail.com> writes:
> I sometimes don't want a title in my LaTeX exported documents and used to use:
>
> #+bind: org-export-latex-title-command ""
>
> in my documents. I see that the new variable is simply
> =org-latex-title-command= and now have:
>
> #+bind: org-latex-title-command ""
>
> This is still generating a \maketitle line in my .tex file.
>
> What's the proper way to do this on Org 8.0?
>
>
I suspect this is the same problem as the one discussed in the following:
http://thread.gmane.org/gmane.emacs.orgmode/72085
Nicolas suggested using a file local variable for that problem and I've
verified that that solution also works for this one. Just add
--8<---------------cut here---------------start------------->8---
# Local Variables:
# org-latex-title-command: ""
# End:
--8<---------------cut here---------------end--------------->8---
at the end of your file.
--
Nick
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Updated syntax for #+bind and no LaTeX \maketitle command?
2013-05-24 5:47 ` Nick Dokos
@ 2013-05-24 6:36 ` Nick Dokos
2013-05-24 16:32 ` John Hendy
0 siblings, 1 reply; 7+ messages in thread
From: Nick Dokos @ 2013-05-24 6:36 UTC (permalink / raw)
To: emacs-orgmode
Nick Dokos <ndokos@gmail.com> writes:
>> #+bind: org-latex-title-command ""
>>
>> This is still generating a \maketitle line in my .tex file.
>>
>> What's the proper way to do this on Org 8.0?
>>
>>
>
> I suspect this is the same problem as the one discussed in the following:
>
> http://thread.gmane.org/gmane.emacs.orgmode/72085
>
> Nicolas suggested using a file local variable for that problem and I've
> verified that that solution also works for this one. Just add
>
> # Local Variables:
> # org-latex-title-command: ""
> # End:
>
> at the end of your file.
No, I'm wrong: it's not the same problem. And using BIND should
work in this case, assuming that it is allowed.
Check the value of org-export-allow-bind-keywords. If nil, then
BIND keywords seem to be ignored silently.
--
Nick
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Updated syntax for #+bind and no LaTeX \maketitle command?
2013-05-24 6:36 ` Nick Dokos
@ 2013-05-24 16:32 ` John Hendy
2013-05-24 21:28 ` Sebastien Vauban
0 siblings, 1 reply; 7+ messages in thread
From: John Hendy @ 2013-05-24 16:32 UTC (permalink / raw)
To: Nick Dokos; +Cc: emacs-orgmode
On Fri, May 24, 2013 at 1:36 AM, Nick Dokos <ndokos@gmail.com> wrote:
> Nick Dokos <ndokos@gmail.com> writes:
>
>>> #+bind: org-latex-title-command ""
>>>
>>> This is still generating a \maketitle line in my .tex file.
>>>
>>> What's the proper way to do this on Org 8.0?
>>>
>>>
>>
>> I suspect this is the same problem as the one discussed in the following:
>>
>> http://thread.gmane.org/gmane.emacs.orgmode/72085
>>
>> Nicolas suggested using a file local variable for that problem and I've
>> verified that that solution also works for this one. Just add
>>
>> # Local Variables:
>> # org-latex-title-command: ""
>> # End:
>>
>> at the end of your file.
>
> No, I'm wrong: it's not the same problem. And using BIND should
> work in this case, assuming that it is allowed.
>
> Check the value of org-export-allow-bind-keywords. If nil, then
> BIND keywords seem to be ignored silently.
Thanks all! Not knowing about the org-export-allow-bind-keywords was
my issue, and setting it to =t= fixed it. Out of curiosity, what's the
difference between org-export-allow-BIND and
org-export-allow-bind-keywords? They M-x help on them sounds very
similar.
#+begin_help org-export-allow-bind-keywords
Documentation:
Non-nil means BIND keywords can define local variable values.
This is a potential security risk, which is why the default value
is nil. You can also allow them through local buffer variables.
#+end_help
#+begin_help org-export-allow-BIND
Documentation:
Non-nil means allow #+BIND to define local variable values for export.
This is a potential security risk, which is why the user must confirm the
use of these lines.
#+end_help
Ah, nevermind. Based on the customize-variable menu option, I'm
thinking the latter is how org should automatically accept #+bind
settings, and the former is whether to allow #+bind settings at all.
Oddly, my value for org-export-allow-bind is set to "confirm" but I
just tested things and didn't get asked...
John
>
> --
> Nick
>
>
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Updated syntax for #+bind and no LaTeX \maketitle command?
2013-05-24 16:32 ` John Hendy
@ 2013-05-24 21:28 ` Sebastien Vauban
0 siblings, 0 replies; 7+ messages in thread
From: Sebastien Vauban @ 2013-05-24 21:28 UTC (permalink / raw)
To: emacs-orgmode-mXXj517/zsQ
Hi John,
John Hendy wrote:
> On Fri, May 24, 2013 at 1:36 AM, Nick Dokos <ndokos-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> wrote:
>> Check the value of org-export-allow-bind-keywords. If nil, then
>> BIND keywords seem to be ignored silently.
>
> Thanks all! Not knowing about the org-export-allow-bind-keywords was
> my issue, and setting it to =t= fixed it. Out of curiosity, what's the
> difference between org-export-allow-BIND and
> org-export-allow-bind-keywords? They M-x help on them sounds very
> similar.
One is used in Org < 8, the other in Org 8 and future versions.
Best regards,
Seb
--
Sebastien Vauban
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2013-05-24 21:28 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-05-23 22:48 Updated syntax for #+bind and no LaTeX \maketitle command? John Hendy
2013-05-23 22:57 ` Marcin Borkowski
2013-05-23 23:14 ` Rasmus
2013-05-24 5:47 ` Nick Dokos
2013-05-24 6:36 ` Nick Dokos
2013-05-24 16:32 ` John Hendy
2013-05-24 21:28 ` Sebastien Vauban
Code repositories for project(s) associated with this public inbox
https://git.savannah.gnu.org/cgit/emacs/org-mode.git
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).