* org-crypt doesn't automatically encrypt on save
@ 2014-09-11 19:44 Rémi Letot
2014-09-11 23:03 ` Darlan Cavalcante Moreira
0 siblings, 1 reply; 12+ messages in thread
From: Rémi Letot @ 2014-09-11 19:44 UTC (permalink / raw)
To: emacs-orgmode
Hello org-mode World,
is anyone successfully using org-crypt with
org-crypt-use-before-save-magic ?
I set it up as per the docs, but apparently the org-mode
before-save-hook is not populated with org-encrypt-entries as it should
when I open an org buffer, meaning that crypt tagged headlines are not
encrypted when I save the file
*but* it works if I manually call M-x org-mode after opening the file...
In summary:
C-x C-f test.org / M-x org-decrypt-entry / C-x C-s does not reencrypt
the entry
C-x C-f test.org / M-x org-mode / M-x org-decrypt-entry / C-x C-s does
work as expected.
Any idea ?
I'm using the Emacs Starter Kit, so that might interfere, but I can't
see how and where...
Thanks,
--
Rémi
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: org-crypt doesn't automatically encrypt on save
2014-09-11 19:44 org-crypt doesn't automatically encrypt on save Rémi Letot
@ 2014-09-11 23:03 ` Darlan Cavalcante Moreira
2014-09-12 10:42 ` Rémi Letot
2014-09-12 14:42 ` org-crypt doesn't automatically encrypt on save Jorge A. Alfaro-Murillo
0 siblings, 2 replies; 12+ messages in thread
From: Darlan Cavalcante Moreira @ 2014-09-11 23:03 UTC (permalink / raw)
To: Rémi Letot; +Cc: emacs-orgmode
You need to load org-crypt and call org-crypt-use-before-save-magic
before you open the org file.
For instance, my configuration for org-crypt is
--8<---------------cut here---------------start------------->8---
(autoload 'org-decrypt-entry "org-crypt.el" "Decrypt the content of the current headline." t)
(autoload 'org-decrypt-entries "org-crypt.el" "Decrypt all entries in the current buffer." t)
(autoload 'org-encrypt-entry "org-crypt.el" "Encrypt the content of the current headline." t)
(autoload 'org-encrypt-entries "org-crypt.el" "Encrypt all top-level entries in the current buffer." t)
(with-eval-after-load "org-crypt"
;; Automatically encrypts everything that has the tag "crypt"
;; when you save the file
(org-crypt-use-before-save-magic)
(setq org-tags-exclude-from-inheritance (quote ("crypt" "Project")))
(setq org-crypt-key "8NUMBERS")
(setq org-crypt-disable-auto-save t)
)
--8<---------------cut here---------------end--------------->8---
Only this gives the same problem you have. When I decrypt an entry
org-crypt is finally loaded but since I'm already visiting the file then
the save magic will not kick in. In my case I only have one file where I
use org-crypt and I define the function below
--8<---------------cut here---------------start------------->8---
(defun my-find-senhas-org-heading nil
(interactive)
(require 'org-crypt)
(find-file "~/org/passwords.org")
)
--8<---------------cut here---------------end--------------->8---
If I often used org-crypt in any org file I would always require
org-crypt and call org-crypt-use-before-save-magic in my Emacs
configuration, but since I only use for this particular file, then
defining a function to visit this file works better for me.
hobbes@poukram.net writes:
> Hello org-mode World,
>
> is anyone successfully using org-crypt with
> org-crypt-use-before-save-magic ?
>
> I set it up as per the docs, but apparently the org-mode
> before-save-hook is not populated with org-encrypt-entries as it should
> when I open an org buffer, meaning that crypt tagged headlines are not
> encrypted when I save the file
>
> *but* it works if I manually call M-x org-mode after opening the file...
>
> In summary:
>
> C-x C-f test.org / M-x org-decrypt-entry / C-x C-s does not reencrypt
> the entry
>
> C-x C-f test.org / M-x org-mode / M-x org-decrypt-entry / C-x C-s does
> work as expected.
>
> Any idea ?
>
> I'm using the Emacs Starter Kit, so that might interfere, but I can't
> see how and where...
>
> Thanks,
> --
> Rémi
--
Darlan Cavalcante Moreira
darcamo@gmail.com
^ permalink raw reply [flat|nested] 12+ messages in thread* Re: org-crypt doesn't automatically encrypt on save
2014-09-11 23:03 ` Darlan Cavalcante Moreira
@ 2014-09-12 10:42 ` Rémi Letot
2014-09-12 14:23 ` Darlan Cavalcante Moreira
2014-09-12 14:42 ` org-crypt doesn't automatically encrypt on save Jorge A. Alfaro-Murillo
1 sibling, 1 reply; 12+ messages in thread
From: Rémi Letot @ 2014-09-12 10:42 UTC (permalink / raw)
To: emacs-orgmode
Darlan Cavalcante Moreira <darcamo@gmail.com> writes:
> You need to load org-crypt and call org-crypt-use-before-save-magic
> before you open the org file.
I have this in my config:
(add-to-list 'org-modules 'org-crypt)
(require 'org-crypt)
So I think that's what is done. I also checked org-mode-hook on a fresh
start of emacs, and it does include a stanza for
org-encrypt-entries. C-h v org-mode-hook begins with this:
-----
Value: (#[nil "\300\301\302\303\304$\207"
[org-add-hook before-save-hook org-encrypt-entries nil t]
5]
-----
So I think that part is ok.
Now I visit a new file, say test.org, which doesn't exist yet. I create
one heading with a bit of content, tag it as :crypt:, and save the
file. Bam, it's not encrypted.
Now I call M-x org-encrypt-entries, and the heading is encrypted. So
org-crypt does work, I can decrypt and encrypt headings manually, but it
won't do it automatically. And indeed, before-save-hook is nil in a
fresh org file and stays so when I visit an org file.
Now I call M-x org-mode on that file, add a space so it is modified and
I can save it, call C-x C-s, and it is encrypted as it should. org-mode
set before-save-hook to (org-encrypt-entries t) as it should. Only I
have to manually call org-mode once the file is open, it won't do it
automatically.
I C-x k the file, re-visit it, and I have to call M-x org-mode on it
again before it will automatically encrypt the headings. All other
org-mode functionnality seems to work fine.
Any idea ?
Thanks,
--
Rémi
^ permalink raw reply [flat|nested] 12+ messages in thread* Re: org-crypt doesn't automatically encrypt on save
2014-09-12 10:42 ` Rémi Letot
@ 2014-09-12 14:23 ` Darlan Cavalcante Moreira
2014-09-12 16:44 ` org-mode-hook not called when entering org files (Was: Re: org-crypt doesn't automatically encrypt on save) Rémi Letot
0 siblings, 1 reply; 12+ messages in thread
From: Darlan Cavalcante Moreira @ 2014-09-12 14:23 UTC (permalink / raw)
To: Rémi Letot; +Cc: emacs-orgmode
One note first, if you change org-modules manually like that you must
make sure this change is done before org-mode is loaded. I prefer to use
the customize interface just for org-modules for that reason.
I also add org-crypt to org-modules like you do. If I open my
password.org file and open it directly I will have the same behaviour
you get. Maybe the save magic does not work reliable when org-crypt is
loaded through org-modules, I'm not sure.
When I call my function that requires org-crypt and calls
org-crypt-use-before-save-magic before opening my password file
everything works. But I only do it like this because I have a single
file with encrypted entries and I prefer to delay loading org-crypt
initialization. I profiled my configuration some time ago and decided to
do that to reduce i little bit the initialization time.
Since you already require org-crypt, just add
"(org-crypt-use-before-save-magic)" after the require and see if that
solves your problem.
Rémi Letot writes:
> Darlan Cavalcante Moreira <darcamo@gmail.com> writes:
>
>> You need to load org-crypt and call org-crypt-use-before-save-magic
>> before you open the org file.
>
> I have this in my config:
>
> (add-to-list 'org-modules 'org-crypt)
> (require 'org-crypt)
>
> So I think that's what is done. I also checked org-mode-hook on a fresh
> start of emacs, and it does include a stanza for
> org-encrypt-entries. C-h v org-mode-hook begins with this:
>
> -----
> Value: (#[nil "\300\301\302\303\304$\207"
> [org-add-hook before-save-hook org-encrypt-entries nil t]
> 5]
> -----
>
> So I think that part is ok.
>
> Now I visit a new file, say test.org, which doesn't exist yet. I create
> one heading with a bit of content, tag it as :crypt:, and save the
> file. Bam, it's not encrypted.
>
> Now I call M-x org-encrypt-entries, and the heading is encrypted. So
> org-crypt does work, I can decrypt and encrypt headings manually, but it
> won't do it automatically. And indeed, before-save-hook is nil in a
> fresh org file and stays so when I visit an org file.
>
>
> Now I call M-x org-mode on that file, add a space so it is modified and
> I can save it, call C-x C-s, and it is encrypted as it should. org-mode
> set before-save-hook to (org-encrypt-entries t) as it should. Only I
> have to manually call org-mode once the file is open, it won't do it
> automatically.
>
> I C-x k the file, re-visit it, and I have to call M-x org-mode on it
> again before it will automatically encrypt the headings. All other
> org-mode functionnality seems to work fine.
>
> Any idea ?
>
> Thanks,
^ permalink raw reply [flat|nested] 12+ messages in thread
* org-mode-hook not called when entering org files (Was: Re: org-crypt doesn't automatically encrypt on save)
2014-09-12 14:23 ` Darlan Cavalcante Moreira
@ 2014-09-12 16:44 ` Rémi Letot
2014-09-12 18:15 ` org-mode-hook not called when entering org files Nick Dokos
0 siblings, 1 reply; 12+ messages in thread
From: Rémi Letot @ 2014-09-12 16:44 UTC (permalink / raw)
To: emacs-orgmode
look near the end of the post for org-mode-hook specific explanation :-)
Darlan Cavalcante Moreira <darcamo@gmail.com> writes:
> One note first, if you change org-modules manually like that you must
> make sure this change is done before org-mode is loaded. I prefer to use
> the customize interface just for org-modules for that reason.
Hmmm, the starter kit requires org in the very first step of
initialization, so that might be the problem... I dug a bit in the doc
and tried org-reload, which doesn't solve my problem...
> I also add org-crypt to org-modules like you do. If I open my
> password.org file and open it directly I will have the same behaviour
> you get. Maybe the save magic does not work reliable when org-crypt is
> loaded through org-modules, I'm not sure.
I didn't know what org-modules did, so I had a look at the source (great
first for me :-) Apparently it just requires the listed extensions, so
requiring org-crypt does the same.
> When I call my function that requires org-crypt and calls
> org-crypt-use-before-save-magic before opening my password file
> everything works. But I only do it like this because I have a single
> file with encrypted entries and I prefer to delay loading org-crypt
> initialization. I profiled my configuration some time ago and decided to
> do that to reduce i little bit the initialization time.
>
>
> Since you already require org-crypt, just add
> "(org-crypt-use-before-save-magic)" after the require and see if that
> solves your problem.
It's already just under the require :-)
Here is my complete org-crypt config:
(add-to-list 'org-modules 'org-crypt)
(require 'org-crypt)
; Encrypt all entries before saving
(org-crypt-use-before-save-magic)
(setq org-tags-exclude-from-inheritance (quote ("crypt")))
; GPG key to use for encryption
(setq org-crypt-key "730D80837333AD60")
org-crypt-use-before-save-magic just populates org-mode-hook with a
before-save-hook, which is correctly done in my case. The trick is that
org-mode-hook doesn't seem to fire when I open an org file...
confirmed: I had a look at the other variables that it should change,
and they do not appear to be modified when I open an org file.
all org seems to work fine, but for some reason org-mode-hook is not
called when I open an org file...
Changing the title as I have a more precise problem :-)
Thanks,
--
Rémi
^ permalink raw reply [flat|nested] 12+ messages in thread* Re: org-mode-hook not called when entering org files
2014-09-12 16:44 ` org-mode-hook not called when entering org files (Was: Re: org-crypt doesn't automatically encrypt on save) Rémi Letot
@ 2014-09-12 18:15 ` Nick Dokos
2014-09-13 19:24 ` Rémi Letot
0 siblings, 1 reply; 12+ messages in thread
From: Nick Dokos @ 2014-09-12 18:15 UTC (permalink / raw)
To: emacs-orgmode
hobbes@poukram.net (Rémi Letot) writes:
> org-crypt-use-before-save-magic just populates org-mode-hook with a
> before-save-hook, which is correctly done in my case. The trick is that
> org-mode-hook doesn't seem to fire when I open an org file...
>
> confirmed: I had a look at the other variables that it should change,
> and they do not appear to be modified when I open an org file.
>
> all org seems to work fine, but for some reason org-mode-hook is not
> called when I open an org file...
>
That's very unlikely: the hook is run using a general emacs mechanism,
so if it were broken, a *lot* of things would be broken.
You can check with
(setq org-mode-hook nil)
(add-hook 'org-mode-hook (function (lambda () (message "RL - my org-mode-hook ran this"))))
perhaps in a minimal .emacs, and then opening a foo.org file (assuming
your auto-mode-alist is set up correctly).
I'd be really surprised if this does not work as expected. And if it
does, your problem is probably a bit deeper than "emacs does not run
the org-mode-hook": perhaps cleaning out your org-mode-hook, restarting
emacs and then adding things back in one at a time would help to figure
out the problem.
HTH,
Nick
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: org-mode-hook not called when entering org files
2014-09-12 18:15 ` org-mode-hook not called when entering org files Nick Dokos
@ 2014-09-13 19:24 ` Rémi Letot
2014-09-15 21:33 ` Nick Dokos
2014-09-15 21:45 ` Nick Dokos
0 siblings, 2 replies; 12+ messages in thread
From: Rémi Letot @ 2014-09-13 19:24 UTC (permalink / raw)
To: emacs-orgmode
Nick Dokos <ndokos@gmail.com> writes:
> hobbes@poukram.net (Rémi Letot) writes:
>
>> all org seems to work fine, but for some reason org-mode-hook is not
>> called when I open an org file...
>>
>
> That's very unlikely: the hook is run using a general emacs mechanism,
> so if it were broken, a *lot* of things would be broken.
>
> You can check with
>
> (setq org-mode-hook nil)
> (add-hook 'org-mode-hook (function (lambda () (message "RL - my
> org-mode-hook ran this"))))
emacs -Q, copied your instructions in scratch buffer and C-x C-e them
both, then opened my test.org file, and nothing happened.
Tried in another emacs -Q to set up a basic org-crypt using scratch:
(require 'org-crypt)
(org-crypt-use-before-save-magic)
C-x C-e on both, then opened a test.org. org-mode-hook is as it should,
but before-save-hook is nil.
Now I noticed a message that I have received for some times when I open
an org file:
File mode specification error: (error "`recenter'ing a window that does
not display current-buffer.")
I didn't notice it before since it has happened for quite some times and
didn't appear to cause any problem, but could it be the cause of this
problem ?
>
> perhaps in a minimal .emacs, and then opening a foo.org file (assuming
> your auto-mode-alist is set up correctly).
auto-mode-alist does include org-mode for org files.
Any idea ? is the error message that I receive a possible cause ?
Thanks,
--
Rémi
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: org-mode-hook not called when entering org files
2014-09-13 19:24 ` Rémi Letot
@ 2014-09-15 21:33 ` Nick Dokos
2014-09-16 8:27 ` Rémi Letot
2014-09-15 21:45 ` Nick Dokos
1 sibling, 1 reply; 12+ messages in thread
From: Nick Dokos @ 2014-09-15 21:33 UTC (permalink / raw)
To: emacs-orgmode
hobbes@poukram.net (Rémi Letot) writes:
> Nick Dokos <ndokos@gmail.com> writes:
>
>> hobbes@poukram.net (Rémi Letot) writes:
>>
>>> all org seems to work fine, but for some reason org-mode-hook is not
>>> called when I open an org file...
>>>
>>
>> That's very unlikely: the hook is run using a general emacs mechanism,
>> so if it were broken, a *lot* of things would be broken.
>>
>> You can check with
>>
>> (setq org-mode-hook nil)
>> (add-hook 'org-mode-hook (function (lambda () (message "RL - my
>> org-mode-hook ran this"))))
>
> emacs -Q, copied your instructions in scratch buffer and C-x C-e them
> both, then opened my test.org file, and nothing happened.
>
Not sure where you get your org-mode, but unless you are using the
org-mode that was bundled with your emacs, this may not be enough:
you might have to do some org-mode initialization (hence the suggestion
for a minimal .emacs file below).
> Tried in another emacs -Q to set up a basic org-crypt using scratch:
>
> (require 'org-crypt)
> (org-crypt-use-before-save-magic)
>
> C-x C-e on both, then opened a test.org. org-mode-hook is as it should,
> but before-save-hook is nil.
>
My advice would be to leave org-crypt to one side until you can get the
simpler test above to pass.
> Now I noticed a message that I have received for some times when I open
> an org file:
>
> File mode specification error: (error "`recenter'ing a window that does
> not display current-buffer.")
>
> I didn't notice it before since it has happened for quite some times and
> didn't appear to cause any problem, but could it be the cause of this
> problem ?
>
>>
>> perhaps in a minimal .emacs, and then opening a foo.org file (assuming
>> your auto-mode-alist is set up correctly).
>
> auto-mode-alist does include org-mode for org files.
>
> Any idea ? is the error message that I receive a possible cause ?
>
Yes, it might: Eric Fraga reported a problem where an error that's
caught causes buffer initialization to not run the hook:
http://thread.gmane.org/gmane.emacs.orgmode/90711
That *might* happen with your error too, although I cannot find the error
message either in current org-mode or current-emacs. Maybe I'm looking
in the wrong place, but which version of org-mode and which version of
emacs are you running?
--
Nick
^ permalink raw reply [flat|nested] 12+ messages in thread* Re: org-mode-hook not called when entering org files
2014-09-15 21:33 ` Nick Dokos
@ 2014-09-16 8:27 ` Rémi Letot
2014-09-16 14:27 ` Nick Dokos
0 siblings, 1 reply; 12+ messages in thread
From: Rémi Letot @ 2014-09-16 8:27 UTC (permalink / raw)
To: emacs-orgmode
Nick Dokos <ndokos@gmail.com> writes:
> hobbes@poukram.net (Rémi Letot) writes:
>
>> Nick Dokos <ndokos@gmail.com> writes:
>>
>>> hobbes@poukram.net (Rémi Letot) writes:
>>>
>>>> all org seems to work fine, but for some reason org-mode-hook is not
>>>> called when I open an org file...
>>>>
>>>
>>> That's very unlikely: the hook is run using a general emacs mechanism,
>>> so if it were broken, a *lot* of things would be broken.
>>>
>>> You can check with
>>>
>>> (setq org-mode-hook nil)
>>> (add-hook 'org-mode-hook (function (lambda () (message "RL - my
>>> org-mode-hook ran this"))))
>>
>> emacs -Q, copied your instructions in scratch buffer and C-x C-e them
>> both, then opened my test.org file, and nothing happened.
>>
>
> Not sure where you get your org-mode, but unless you are using the
> org-mode that was bundled with your emacs, this may not be enough:
> you might have to do some org-mode initialization (hence the suggestion
> for a minimal .emacs file below).
That's the org-mode bundled with my emacs:
Org-mode version 8.2.6 (release_8.2.6-1 @ /usr/share/emacs/24.4.50/lisp/org/)
GNU Emacs 24.4.50.1 (x86_64-pc-linux-gnu, GTK+ Version 3.12.2) of 2014-08-23 on gkar, modified by Debian
it seems that emacs -Q is enough to get org-mode working since opening
an org file does trigger the error below :-)
...
> My advice would be to leave org-crypt to one side until you can get the
> simpler test above to pass.
ok
>> Now I noticed a message that I have received for some times when I open
>> an org file:
>>
>> File mode specification error: (error "`recenter'ing a window that does
>> not display current-buffer.")
>>
>> I didn't notice it before since it has happened for quite some times and
>> didn't appear to cause any problem, but could it be the cause of this
>> problem ?
>>
>>>
>>> perhaps in a minimal .emacs, and then opening a foo.org file (assuming
>>> your auto-mode-alist is set up correctly).
>>
>> auto-mode-alist does include org-mode for org files.
>>
>> Any idea ? is the error message that I receive a possible cause ?
>>
>
> Yes, it might: Eric Fraga reported a problem where an error that's
> caught causes buffer initialization to not run the hook:
>
> http://thread.gmane.org/gmane.emacs.orgmode/90711
>
> That *might* happen with your error too, although I cannot find the error
> message either in current org-mode or current-emacs. Maybe I'm looking
> in the wrong place, but which version of org-mode and which version of
> emacs are you running?
See above, that's org currently bundled with emacs. I could be coerced
to try trunk if it has a chance to solve the problem and the test is
of some use to you, but then i have some docs to read first :-)
Thanks,
--
Rémi
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: org-mode-hook not called when entering org files
2014-09-16 8:27 ` Rémi Letot
@ 2014-09-16 14:27 ` Nick Dokos
0 siblings, 0 replies; 12+ messages in thread
From: Nick Dokos @ 2014-09-16 14:27 UTC (permalink / raw)
To: emacs-orgmode
hobbes@poukram.net (Rémi Letot) writes:
> That's the org-mode bundled with my emacs:
> Org-mode version 8.2.6 (release_8.2.6-1 @ /usr/share/emacs/24.4.50/lisp/org/)
> GNU Emacs 24.4.50.1 (x86_64-pc-linux-gnu, GTK+ Version 3.12.2) of 2014-08-23 on gkar, modified by Debian
>
> ...
>
> See above, that's org currently bundled with emacs. I could be coerced
> to try trunk if it has a chance to solve the problem and the test is
> of some use to you, but then i have some docs to read first :-)
>
OK, it's probably caused by
http://debbugs.gnu.org/cgi/bugreport.cgi?bug=17724
then. It's your choice what you want to do: you can wait until it's
fixed in emacs, or you can upgrade. The test is of no use to me: my
org-mode is working :-)
--
Nick
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: org-mode-hook not called when entering org files
2014-09-13 19:24 ` Rémi Letot
2014-09-15 21:33 ` Nick Dokos
@ 2014-09-15 21:45 ` Nick Dokos
1 sibling, 0 replies; 12+ messages in thread
From: Nick Dokos @ 2014-09-15 21:45 UTC (permalink / raw)
To: emacs-orgmode
hobbes@poukram.net (Rémi Letot) writes:
> ...
> File mode specification error: (error "`recenter'ing a window that does
> not display current-buffer.")
>
> I didn't notice it before since it has happened for quite some times and
> didn't appear to cause any problem, but could it be the cause of this
> problem ?
>
>>
>> perhaps in a minimal .emacs, and then opening a foo.org file (assuming
>> your auto-mode-alist is set up correctly).
>
> auto-mode-alist does include org-mode for org files.
>
> Any idea ? is the error message that I receive a possible cause ?
>
One more thing: see
http://debbugs.gnu.org/cgi/bugreport.cgi?bug=17724
Earlier today, Bastien said that that is on his radar: it might fix
your problem when it lands.
--
Nick
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: org-crypt doesn't automatically encrypt on save
2014-09-11 23:03 ` Darlan Cavalcante Moreira
2014-09-12 10:42 ` Rémi Letot
@ 2014-09-12 14:42 ` Jorge A. Alfaro-Murillo
1 sibling, 0 replies; 12+ messages in thread
From: Jorge A. Alfaro-Murillo @ 2014-09-12 14:42 UTC (permalink / raw)
To: emacs-orgmode
Darlan Cavalcante Moreira writes:
> In my case I only have one file where I use org-crypt and I
> define the function below
>
> --8<---------------cut
> here---------------start------------->8--- (defun
> my-find-senhas-org-heading nil
> (interactive) (require 'org-crypt) (find-file
> "~/org/passwords.org") )
> --8<---------------cut
> here---------------end--------------->8---
>
If you only use one file for your passwords and want it encrypted
(that you should), you can also check org-passwords.el that is
included in the contrib directory.
Best,
--
Jorge.
^ permalink raw reply [flat|nested] 12+ messages in thread
end of thread, other threads:[~2014-09-16 14:28 UTC | newest]
Thread overview: 12+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2014-09-11 19:44 org-crypt doesn't automatically encrypt on save Rémi Letot
2014-09-11 23:03 ` Darlan Cavalcante Moreira
2014-09-12 10:42 ` Rémi Letot
2014-09-12 14:23 ` Darlan Cavalcante Moreira
2014-09-12 16:44 ` org-mode-hook not called when entering org files (Was: Re: org-crypt doesn't automatically encrypt on save) Rémi Letot
2014-09-12 18:15 ` org-mode-hook not called when entering org files Nick Dokos
2014-09-13 19:24 ` Rémi Letot
2014-09-15 21:33 ` Nick Dokos
2014-09-16 8:27 ` Rémi Letot
2014-09-16 14:27 ` Nick Dokos
2014-09-15 21:45 ` Nick Dokos
2014-09-12 14:42 ` org-crypt doesn't automatically encrypt on save Jorge A. Alfaro-Murillo
Code repositories for project(s) associated with this public inbox
https://git.savannah.gnu.org/cgit/emacs/org-mode.git
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).