* Problem with make and autoloads
@ 2011-05-26 16:56 Matt Lundin
2011-05-27 17:32 ` Achim Gratz
2011-05-30 6:40 ` suvayu ali
0 siblings, 2 replies; 5+ messages in thread
From: Matt Lundin @ 2011-05-26 16:56 UTC (permalink / raw)
To: Org Mode
Hello list,
Recently, autoloads ceased to work in my local org-mode installation.
My typical update routine is to:
1. Pull the most recent changes into my local org-mode repository,
located at "~/org-mode".
2. Run "make clean && make".
My .emacs file contains the following lines:
--8<---------------cut here---------------start------------->8---
(add-to-list 'load-path "~/org-mode/lisp")
(require 'org-install)
--8<---------------cut here---------------end--------------->8---
Note: I have replicated the problem using an .emacs file containing
*only* those lines.
When I call an autoloaded function, such as org-capture, I receive the
following error:
Debugger entered--Lisp error: (file-error "Cannot open load file" "lisp/org-capture")
execute-extended-command(nil)
call-interactively(execute-extended-command nil nil)
The autoloads in org-install all have "lisp/" prepended to the file
name.
Here is an example:
--8<---------------cut here---------------start------------->8---
(autoload 'org-capture "lisp/org-capture" "\
--8<---------------cut here---------------end--------------->8---
This causes problems since there is no "~/org-mode/lisp/lisp/org-capture.el".
In the past, the autoloads in org-install.el looked like this:
--8<---------------cut here---------------start------------->8---
(autoload 'org-capture "org-capture" "\
--8<---------------cut here---------------end--------------->8---
Adding "~/org-mode" to the load path allows emacs to find the files
correctly, but this is a temporary workaround. (The manual instructs one
to add the lisp directory to the org path---not the top level of the
distribution directory.)
Any insights into why the autoloads are being generated this way? Is
anyone else experiencing the same issue? I have downloaded a new version
of the distribution to ensure that no local changes to the Makefile are
involved.
Note: I am using a recent version of bzr emacs, but the problem also
occurred when compiling org-mode with emacs 23.2.
Thanks,
Matt
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: Problem with make and autoloads
2011-05-26 16:56 Problem with make and autoloads Matt Lundin
@ 2011-05-27 17:32 ` Achim Gratz
2011-06-02 0:46 ` Matt Lundin
2011-05-30 6:40 ` suvayu ali
1 sibling, 1 reply; 5+ messages in thread
From: Achim Gratz @ 2011-05-27 17:32 UTC (permalink / raw)
To: emacs-orgmode
Matt Lundin <mdl@imapmail.org> writes:
> The autoloads in org-install all have "lisp/" prepended to the file
> name.
What is prefix and lispdir set to in the Makefile?
Achim.
--
+<[Q+ Matrix-12 WAVE#46+305 Neuron microQkb Andromeda XTk Blofeld]>+
SD adaptations for Waldorf Q V3.00R3 and Q+ V3.54R2:
http://Synth.Stromeko.net/Downloads.html#WaldorfSDada
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: Problem with make and autoloads
2011-05-27 17:32 ` Achim Gratz
@ 2011-06-02 0:46 ` Matt Lundin
2011-06-02 20:49 ` Achim Gratz
0 siblings, 1 reply; 5+ messages in thread
From: Matt Lundin @ 2011-06-02 0:46 UTC (permalink / raw)
To: Achim Gratz; +Cc: emacs-orgmode
Achim Gratz <Stromeko@nexgo.de> writes:
> Matt Lundin <mdl@imapmail.org> writes:
>
>> The autoloads in org-install all have "lisp/" prepended to the file
>> name.
>
> What is prefix and lispdir set to in the Makefile?
They are the default values (i.e., I have not changed anything).
--8<---------------cut here---------------start------------->8---
# Where local software is found
prefix=/usr/local
# Where local lisp files go.
lispdir = $(prefix)/share/emacs/site-lisp
--8<---------------cut here---------------end--------------->8---
Note: I do not run "make install". My normal routine is to run "make
clean && make".
Best,
Matt
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: Problem with make and autoloads
2011-06-02 0:46 ` Matt Lundin
@ 2011-06-02 20:49 ` Achim Gratz
0 siblings, 0 replies; 5+ messages in thread
From: Achim Gratz @ 2011-06-02 20:49 UTC (permalink / raw)
To: emacs-orgmode
Matt Lundin <mdl@imapmail.org> writes:
> They are the default values (i.e., I have not changed anything).
[...]
> Note: I do not run "make install". My normal routine is to run "make
> clean && make".
Yes, I noted this, I was just poking around to see where the build
process might pick up that extra "lisp/" in org-install. On another
note, where is that org-install located? Could it be you have maybe two
of them and Emacs picks up the wrong one? The end of the make should
look something like this (watch the linewraps:
emacs -batch -q -no-site-file -eval "(setq load-path (cons (expand-file-name \"./lisp/\") (cons \"<<$lispdir>>\" load-path)))" --eval "(require 'autoload)" \
--eval '(find-file "org-install.el")' \
--eval '(erase-buffer)' \
--eval '(mapc (lambda (x) (generate-file-autoloads (symbol-name x))) (quote (lisp/org.el <<...>> lisp/ob-scheme.el)))' \
--eval '(insert "\n(provide (quote org-install))\n")' \
--eval '(save-buffer)'
Loading vc-git...
Generating autoloads for lisp/org.el...
...
Saving file <<.>>/org-install.el...
Wrote <<.>>/org-install.el
mv org-install.el lisp
^^^maybe the file is not moved at all or can't be deleted?
emacs -batch -q -no-site-file -eval "(setq load-path (cons
(expand-file-name \"./lisp/\") (cons \"<<$lispdir>>\" load-path)))" -f batch-byte-compile lisp/org-install.el
Wrote <<...>>/lisp/org-install.elc
If this does not happen after you've removed both org-install.el and
org-install.elc and then do another make, then somethings is very wrong.
My guess is that you have a stray org-install.el in <<.>> (make clean
probably should remove it both here and in ./lisp, but doesn't).
Regards,
Achim.
--
+<[Q+ Matrix-12 WAVE#46+305 Neuron microQkb Andromeda XTk Blofeld]>+
DIY Stuff:
http://Synth.Stromeko.net/DIY.html
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: Problem with make and autoloads
2011-05-26 16:56 Problem with make and autoloads Matt Lundin
2011-05-27 17:32 ` Achim Gratz
@ 2011-05-30 6:40 ` suvayu ali
1 sibling, 0 replies; 5+ messages in thread
From: suvayu ali @ 2011-05-30 6:40 UTC (permalink / raw)
To: Org Mode
On Thu, May 26, 2011 at 9:56 AM, Matt Lundin <mdl@imapmail.org> wrote:
> Recently, autoloads ceased to work in my local org-mode installation.
>
> My typical update routine is to:
>
> 1. Pull the most recent changes into my local org-mode repository,
> located at "~/org-mode".
> 2. Run "make clean && make".
>
> My .emacs file contains the following lines:
>
> --8<---------------cut here---------------start------------->8---
> (add-to-list 'load-path "~/org-mode/lisp")
> (require 'org-install)
> --8<---------------cut here---------------end--------------->8---
I see identical behaviour after I updated org today.
--
Suvayu
Open source is the future. It sets us free.
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2011-06-02 20:50 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2011-05-26 16:56 Problem with make and autoloads Matt Lundin
2011-05-27 17:32 ` Achim Gratz
2011-06-02 0:46 ` Matt Lundin
2011-06-02 20:49 ` Achim Gratz
2011-05-30 6:40 ` suvayu ali
Code repositories for project(s) associated with this public inbox
https://git.savannah.gnu.org/cgit/emacs/org-mode.git
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).