* Example for beamer export with blocks and twocolumn
@ 2010-12-09 14:55 Loris Bennett
2010-12-10 3:30 ` suvayu ali
0 siblings, 1 reply; 9+ messages in thread
From: Loris Bennett @ 2010-12-09 14:55 UTC (permalink / raw)
To: emacs-orgmode
Hi,
Is there a complete example of getting blocks and two-columns to work
with beamer export? The corresponding code is not being generated in the
latex file. I assume there is something wrong with my
org-export-latex-classes. I'm using Org-mode 7.3 with Emacs 23.1.1.
This seems to have cropped up before, but I didn't see a solution that
seemed applicable to my case.
Thanks,
Loris
--
Dr. Loris Bennett
ZEDAT Computer Centre
Freie Universität Berlin
Berlin, Germany
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Example for beamer export with blocks and twocolumn
2010-12-09 14:55 Example for beamer export with blocks and twocolumn Loris Bennett
@ 2010-12-10 3:30 ` suvayu ali
2010-12-10 3:33 ` suvayu ali
2010-12-10 7:42 ` Loris Bennett
0 siblings, 2 replies; 9+ messages in thread
From: suvayu ali @ 2010-12-10 3:30 UTC (permalink / raw)
To: Loris Bennett; +Cc: emacs-orgmode
Hi Loris,
On Thu, Dec 9, 2010 at 3:55 PM, Loris Bennett
<loris.bennett@fu-berlin.de> wrote:
> Hi,
>
> Is there a complete example of getting blocks and two-columns to work
> with beamer export? The corresponding code is not being generated in the
> latex file. I assume there is something wrong with my
> org-export-latex-classes. I'm using Org-mode 7.3 with Emacs 23.1.1.
>
This is an example from a resent presentation I gave. This shows up as
a plot on the left column and 2 equations related to the plot on the
right column.
#+BEAMER_FRAME_LEVEL: 3
.....
* Some Section
** Some Subsection
*** \subsecname \\ some description
**** Columns :B_columns:
:PROPERTIES:
:BEAMER_env: columns
:END:
***** 0.4 :B_column:
:PROPERTIES:
:BEAMER_env: column
:END:
#+ATTR_LaTeX: width=4.5cm,height=6cm,angle=0
[[file:~/org/path/to/image1.png]]
***** 0.5 :B_column:
:PROPERTIES:
:BEAMER_env: column
:END:
****** Smearing function :B_ignoreheading:
:PROPERTIES:
:BEAMER_env: ignoreheading
:END:
$$\Bigg\} E_{\parallel} \rightarrow T_1 \times E_{\parallel} +
T_2 \times \mathcal{G}$$ \vspace{6 mm}
$$\Bigg\}E_{\perp} \rightarrow T_3 \times E_{\perp} + T_4
\times \mathcal{G}$$ \vspace{6 mm}
> Loris
Hope this helps.
--
Suvayu
Open source is the future. It sets us free.
^ permalink raw reply [flat|nested] 9+ messages in thread* Re: Example for beamer export with blocks and twocolumn
2010-12-10 3:30 ` suvayu ali
@ 2010-12-10 3:33 ` suvayu ali
2010-12-10 7:42 ` Loris Bennett
1 sibling, 0 replies; 9+ messages in thread
From: suvayu ali @ 2010-12-10 3:33 UTC (permalink / raw)
To: Loris Bennett; +Cc: emacs-orgmode
Sorry forgot to Include a line,
On Fri, Dec 10, 2010 at 4:30 AM, suvayu ali <fatkasuvayu+linux@gmail.com> wrote:
>
>
> #+BEAMER_FRAME_LEVEL: 3
> #+COLUMNS: %40ITEM %10BEAMER_env(Env) %9BEAMER_envargs(Env Args) %4BEAMER_col(Col) %10BEAMER_extra(Extra)
> ^^^^^^^^^^^^^^^^^^^^^
--
Suvayu
Open source is the future. It sets us free.
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Example for beamer export with blocks and twocolumn
2010-12-10 3:30 ` suvayu ali
2010-12-10 3:33 ` suvayu ali
@ 2010-12-10 7:42 ` Loris Bennett
2010-12-10 8:13 ` suvayu ali
` (2 more replies)
1 sibling, 3 replies; 9+ messages in thread
From: Loris Bennett @ 2010-12-10 7:42 UTC (permalink / raw)
To: emacs-orgmode
suvayu ali <fatkasuvayu+linux@gmail.com> writes:
> Hi Loris,
>
> On Thu, Dec 9, 2010 at 3:55 PM, Loris Bennett
> <loris.bennett@fu-berlin.de> wrote:
>> Hi,
>>
>> Is there a complete example of getting blocks and two-columns to work
>> with beamer export? The corresponding code is not being generated in the
>> latex file. I assume there is something wrong with my
>> org-export-latex-classes. I'm using Org-mode 7.3 with Emacs 23.1.1.
>>
>
> This is an example from a resent presentation I gave. This shows up as
> a plot on the left column and 2 equations related to the plot on the
> right column.
>
>
> #+BEAMER_FRAME_LEVEL: 3
>
> .....
>
> * Some Section
> ** Some Subsection
> *** \subsecname \\ some description
> **** Columns :B_columns:
> :PROPERTIES:
> :BEAMER_env: columns
> :END:
>
> ***** 0.4 :B_column:
> :PROPERTIES:
> :BEAMER_env: column
> :END:
> #+ATTR_LaTeX: width=4.5cm,height=6cm,angle=0
> [[file:~/org/path/to/image1.png]]
>
> ***** 0.5 :B_column:
> :PROPERTIES:
> :BEAMER_env: column
> :END:
> ****** Smearing function :B_ignoreheading:
> :PROPERTIES:
> :BEAMER_env: ignoreheading
> :END:
> $$\Bigg\} E_{\parallel} \rightarrow T_1 \times E_{\parallel} +
> T_2 \times \mathcal{G}$$ \vspace{6 mm}
>
> $$\Bigg\}E_{\perp} \rightarrow T_3 \times E_{\perp} + T_4
> \times \mathcal{G}$$ \vspace{6 mm}
>
>
>> Loris
>
> Hope this helps.
Thanks for the reply. However, I my problem is not with the main
presentation part of the org file.
What I would really like to see is
1. the preamble to the presentation where the MACROs LaTeX_CLASS options
etc. are given
2. The value org-export-latex-classes
I have found various examples, but when I put it together, structures
such as blocks and two-column just are not exported to the LaTeX file.
Could some one provide me with a *complete* example?
Thanks
Loris
--
Dr. Loris Bennett
ZEDAT Computer Centre
Freie Universität Berlin
Berlin, Germany
^ permalink raw reply [flat|nested] 9+ messages in thread* Re: Re: Example for beamer export with blocks and twocolumn
2010-12-10 7:42 ` Loris Bennett
@ 2010-12-10 8:13 ` suvayu ali
2010-12-10 8:43 ` Loris Bennett
2010-12-10 21:04 ` Eric S Fraga
2 siblings, 0 replies; 9+ messages in thread
From: suvayu ali @ 2010-12-10 8:13 UTC (permalink / raw)
To: Loris Bennett; +Cc: emacs-orgmode
On Fri, Dec 10, 2010 at 8:42 AM, Loris Bennett
<loris.bennett@fu-berlin.de> wrote:
> What I would really like to see is
>
> 1. the preamble to the presentation where the MACROs LaTeX_CLASS options
> etc. are given
>
I gave that, only one line for me. (there are other lines but they are
not related to columns) Here it is again,
#+COLUMNS: %40ITEM %10BEAMER_env(Env) %9BEAMER_envargs(Env Args)
%4BEAMER_col(Col) %10BEAMER_extra(Extra)
> 2. The value org-export-latex-classes
>
I didn't customise anything, this is the default.
(("article" "\\documentclass[11pt]{article}"
("\\section{%s}" . "\\section*{%s}")
("\\subsection{%s}" . "\\subsection*{%s}")
("\\subsubsection{%s}" . "\\subsubsection*{%s}")
("\\paragraph{%s}" . "\\paragraph*{%s}")
("\\subparagraph{%s}" . "\\subparagraph*{%s}"))
("report" "\\documentclass[11pt]{report}"
("\\part{%s}" . "\\part*{%s}")
("\\chapter{%s}" . "\\chapter*{%s}")
("\\section{%s}" . "\\section*{%s}")
("\\subsection{%s}" . "\\subsection*{%s}")
("\\subsubsection{%s}" . "\\subsubsection*{%s}"))
("book" "\\documentclass[11pt]{book}"
("\\part{%s}" . "\\part*{%s}")
("\\chapter{%s}" . "\\chapter*{%s}")
("\\section{%s}" . "\\section*{%s}")
("\\subsection{%s}" . "\\subsection*{%s}")
("\\subsubsection{%s}" . "\\subsubsection*{%s}"))
("beamer" "\\documentclass{beamer}" org-beamer-sectioning))
> I have found various examples, but when I put it together, structures
> such as blocks and two-column just are not exported to the LaTeX file.
Hope this helps.
--
Suvayu
Open source is the future. It sets us free.
^ permalink raw reply [flat|nested] 9+ messages in thread* Re: Example for beamer export with blocks and twocolumn
2010-12-10 7:42 ` Loris Bennett
2010-12-10 8:13 ` suvayu ali
@ 2010-12-10 8:43 ` Loris Bennett
2010-12-10 21:04 ` Eric S Fraga
2 siblings, 0 replies; 9+ messages in thread
From: Loris Bennett @ 2010-12-10 8:43 UTC (permalink / raw)
To: emacs-orgmode
Loris Bennett <loris.bennett@fu-berlin.de> writes:
> suvayu ali <fatkasuvayu+linux@gmail.com> writes:
>
>> Hi Loris,
>>
>> On Thu, Dec 9, 2010 at 3:55 PM, Loris Bennett
>> <loris.bennett@fu-berlin.de> wrote:
>>> Hi,
>>>
>>> Is there a complete example of getting blocks and two-columns to work
>>> with beamer export? The corresponding code is not being generated in the
>>> latex file. I assume there is something wrong with my
>>> org-export-latex-classes. I'm using Org-mode 7.3 with Emacs 23.1.1.
>>>
>>
>> This is an example from a resent presentation I gave. This shows up as
>> a plot on the left column and 2 equations related to the plot on the
>> right column.
>>
>>
>> #+BEAMER_FRAME_LEVEL: 3
>>
>> .....
>>
>> * Some Section
>> ** Some Subsection
>> *** \subsecname \\ some description
>> **** Columns :B_columns:
>> :PROPERTIES:
>> :BEAMER_env: columns
>> :END:
>>
>> ***** 0.4 :B_column:
>> :PROPERTIES:
>> :BEAMER_env: column
>> :END:
>> #+ATTR_LaTeX: width=4.5cm,height=6cm,angle=0
>> [[file:~/org/path/to/image1.png]]
>>
>> ***** 0.5 :B_column:
>> :PROPERTIES:
>> :BEAMER_env: column
>> :END:
>> ****** Smearing function :B_ignoreheading:
>> :PROPERTIES:
>> :BEAMER_env: ignoreheading
>> :END:
>> $$\Bigg\} E_{\parallel} \rightarrow T_1 \times E_{\parallel} +
>> T_2 \times \mathcal{G}$$ \vspace{6 mm}
>>
>> $$\Bigg\}E_{\perp} \rightarrow T_3 \times E_{\perp} + T_4
>> \times \mathcal{G}$$ \vspace{6 mm}
>>
>>
>>> Loris
>>
>> Hope this helps.
>
> Thanks for the reply. However, I my problem is not with the main
> presentation part of the org file.
>
> What I would really like to see is
>
> 1. the preamble to the presentation where the MACROs LaTeX_CLASS options
> etc. are given
>
> 2. The value org-export-latex-classes
>
> I have found various examples, but when I put it together, structures
> such as blocks and two-column just are not exported to the LaTeX file.
>
> Could some one provide me with a *complete* example?
>
> Thanks
>
> Loris
OK, reading the replies I received, I realised that my
org-export-latex-classes was borked, due to my somewhat random
tweaking. I removed the customisation and, hey presto, blocks and
two-column appeared.
Thank for the help
--
Dr. Loris Bennett
ZEDAT Computer Centre
Freie Universität Berlin
Berlin, Germany
^ permalink raw reply [flat|nested] 9+ messages in thread* Re: Re: Example for beamer export with blocks and twocolumn
2010-12-10 7:42 ` Loris Bennett
2010-12-10 8:13 ` suvayu ali
2010-12-10 8:43 ` Loris Bennett
@ 2010-12-10 21:04 ` Eric S Fraga
2010-12-13 7:59 ` Loris Bennett
2 siblings, 1 reply; 9+ messages in thread
From: Eric S Fraga @ 2010-12-10 21:04 UTC (permalink / raw)
To: Loris Bennett; +Cc: emacs-orgmode
Loris Bennett <loris.bennett@fu-berlin.de> writes:
[...]
> Thanks for the reply. However, I my problem is not with the main
> presentation part of the org file.
>
> What I would really like to see is
>
> 1. the preamble to the presentation where the MACROs LaTeX_CLASS options
> etc. are given
Loris,
did you have a look at the tutorial on Worg:
: http://orgmode.org/worg/org-tutorials/org-beamer/tutorial.php
it includes a link to an example presentation,
: http://orgmode.org/worg/sources/org-tutorials/org-beamer/presentation.org
one that works /out of the box/ with org, or should... and the example
includes a slide that is basically what you are trying to do.
HTH,
eric
--
: Eric S Fraga (GnuPG: 0xC89193D8FFFCF67D) in Emacs 23.2.1
: using Org-mode version 7.3 (release_7.3.232.g972b0)
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Example for beamer export with blocks and twocolumn
2010-12-10 21:04 ` Eric S Fraga
@ 2010-12-13 7:59 ` Loris Bennett
2010-12-15 9:46 ` Eric S Fraga
0 siblings, 1 reply; 9+ messages in thread
From: Loris Bennett @ 2010-12-13 7:59 UTC (permalink / raw)
To: emacs-orgmode
Eric S Fraga <e.fraga@ucl.ac.uk> writes:
> Loris Bennett <loris.bennett@fu-berlin.de> writes:
>
> [...]
>
>> Thanks for the reply. However, I my problem is not with the main
>> presentation part of the org file.
>>
>> What I would really like to see is
>>
>> 1. the preamble to the presentation where the MACROs LaTeX_CLASS options
>> etc. are given
>
> Loris,
>
> did you have a look at the tutorial on Worg:
>
> : http://orgmode.org/worg/org-tutorials/org-beamer/tutorial.php
>
> it includes a link to an example presentation,
>
> : http://orgmode.org/worg/sources/org-tutorials/org-beamer/presentation.org
>
> one that works /out of the box/ with org, or should... and the example
> includes a slide that is basically what you are trying to do.
>
> HTH,
> eric
Hi Eric,
The examples do indeed work out of the box. My problem was that I was am
using Emacs 23.1.1, which comes with orgmode 6.21b. I then set up
org-export-latex-classes by hand for 'beamer' and got things sort of
working apart from blocks and two-column. I subsequently installed
orgmode 7.3, but still retained my customisations, and was thus still
unable to get blocks and two-column. Removing the customisation fixed
things.
Perhaps a remark about how to set org-export-latex-classes could be
added to the documentation in the wiki, particularly since the current
Debian stable comes with emacs 22.2, which presumably contains a yet older
version of orgmode.
Cheers
Loris
--
Dr. Loris Bennett
ZEDAT Computer Centre
Freie Universität Berlin
Berlin, Germany
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Re: Example for beamer export with blocks and twocolumn
2010-12-13 7:59 ` Loris Bennett
@ 2010-12-15 9:46 ` Eric S Fraga
0 siblings, 0 replies; 9+ messages in thread
From: Eric S Fraga @ 2010-12-15 9:46 UTC (permalink / raw)
To: Loris Bennett; +Cc: emacs-orgmode
Loris Bennett <loris.bennett@fu-berlin.de> writes:
[...]
> Perhaps a remark about how to set org-export-latex-classes could be
> added to the documentation in the wiki, particularly since the current
> Debian stable comes with emacs 22.2, which presumably contains a yet older
> version of orgmode.
Good point. I'll update the beamer tutorial on Worg to make sure it
states clearly what version of org is required. I don't think there's
any mileage to be gained in going into details about
org-export-latex-classes, however.
--
: Eric S Fraga (GnuPG: 0xC89193D8FFFCF67D) in Emacs 23.2.1
: using Org-mode version 7.4 (release_7.4.25.geb0d)
^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2010-12-15 10:47 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2010-12-09 14:55 Example for beamer export with blocks and twocolumn Loris Bennett
2010-12-10 3:30 ` suvayu ali
2010-12-10 3:33 ` suvayu ali
2010-12-10 7:42 ` Loris Bennett
2010-12-10 8:13 ` suvayu ali
2010-12-10 8:43 ` Loris Bennett
2010-12-10 21:04 ` Eric S Fraga
2010-12-13 7:59 ` Loris Bennett
2010-12-15 9:46 ` Eric S Fraga
Code repositories for project(s) associated with this public inbox
https://git.savannah.gnu.org/cgit/emacs/org-mode.git
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).