emacs-orgmode@gnu.org archives
 help / color / mirror / code / Atom feed

* Agenda export to html error
@ 2009-07-12 15:10 Nicolas Goaziou
  2009-07-12 16:21 ` Dan Davison
  0 siblings, 1 reply; 8+ messages in thread
From: Nicolas Goaziou @ 2009-07-12 15:10 UTC (permalink / raw)
  To: emacs-orgmode

Hello,

When I try to export my agenda view to html (C-x C-w test.html), I get
an "Invalid face" error in the minibuffer and no output file. The
Message buffer tells me "face-attribute: Invalid face".

Exporting to postscript works well though.

I have tried with and without setting org-todo-keyword-faces with no
success.

Would anyone have a clue about this problem ?

Thanks,

--
Nicolas Goaziou

^ permalink raw reply	[flat|nested] 8+ messages in thread

• * Re: Agenda export to html error
    2009-07-12 15:10 Agenda export to html error Nicolas Goaziou
  @ 2009-07-12 16:21 ` Dan Davison
    2009-07-12 17:42   ` Nicolas Goaziou
    0 siblings, 1 reply; 8+ messages in thread
  From: Dan Davison @ 2009-07-12 16:21 UTC (permalink / raw)
    To: emacs-orgmode
  
  Nicolas Goaziou <n.goaziou@neuf.fr> writes:
  
  > Hello,
  >
  > When I try to export my agenda view to html (C-x C-w test.html), I get
  > an "Invalid face" error in the minibuffer and no output file. The
  > Message buffer tells me "face-attribute: Invalid face".
  >
  > Exporting to postscript works well though.
  >
  > I have tried with and without setting org-todo-keyword-faces with no
  > success.
  >
  > Would anyone have a clue about this problem ?
  
  I think this is caused by a problem with an Emacs component called
  htmlize, when used on Emacs 23 (are you using Emacs 23?). Carsten has
  put the appropriate new version of htmlize.el into the
  org-mode/contrib/lisp directory, to address this problem. So my
  suggestion is to try
  
  (add-to-list 'load-path "location/of/org-mode/contrib/lisp")
  (require 'htmlize)
  
  and see if that fixes it (The aim is to make sure that the version of
  htmlize in org-mode/contrib/lisp gets used as opposed to the version
  that comes with Emacs).
  
  Dan
  
  >
  > Thanks,
  >
  > --
  > Nicolas Goaziou
  >
  >
  >
  > _______________________________________________
  > Emacs-orgmode mailing list
  > Remember: use `Reply All' to send replies to the list.
  > Emacs-orgmode@gnu.org
  > http://lists.gnu.org/mailman/listinfo/emacs-orgmode
  
  ^ permalink raw reply	[flat|nested] 8+ messages in thread

• • * Re: Agenda export to html error
      2009-07-12 16:21 ` Dan Davison
    @ 2009-07-12 17:42   ` Nicolas Goaziou
      2009-07-12 18:15     ` Nick Dokos
      0 siblings, 1 reply; 8+ messages in thread
    From: Nicolas Goaziou @ 2009-07-12 17:42 UTC (permalink / raw)
      To: Dan Davison; +Cc: emacs-orgmode
    
    Dan Davison <davison@stats.ox.ac.uk> writes:
    
    > I think this is caused by a problem with an Emacs component called
    > htmlize, when used on Emacs 23 (are you using Emacs 23?). 
    
    I am.
    
    > (add-to-list 'load-path "location/of/org-mode/contrib/lisp")
    > (require 'htmlize)
    
    Well, after putting that in my .emacs, byte-compiling htmlize.el *and*
    renaming every single file named htmlize.el[c] in my /usr hierarchy, it
    now works.
    
    I owe you a thank you.
    
    Though, I still wonder why htmlize.elc in /usr was taking precedence
    over the one in the contrib directory, even after I had compiled it.
    
    -- 
    Nicolas Goaziou
    
    ^ permalink raw reply	[flat|nested] 8+ messages in thread

  • • * Re: Agenda export to html error
        2009-07-12 17:42   ` Nicolas Goaziou
      @ 2009-07-12 18:15     ` Nick Dokos
        2009-07-12 19:15       ` Nicolas Goaziou
        0 siblings, 1 reply; 8+ messages in thread
      From: Nick Dokos @ 2009-07-12 18:15 UTC (permalink / raw)
        To: Nicolas Goaziou; +Cc: Dan Davison, emacs-orgmode
      
      Nicolas Goaziou <n.goaziou@neuf.fr> wrote:
      
      > ...
      > 
      > Though, I still wonder why htmlize.elc in /usr was taking precedence
      > over the one in the contrib directory, even after I had compiled it.
      > 
      
      Check your load-path - sometimes, packages take too many freedoms with
      it.
      
      locate-library is also useful to see from where a package is loaded:
      
         (locate-library "htmlize")
      
      HTH,
      Nick
      
      ^ permalink raw reply	[flat|nested] 8+ messages in thread

    • • * Re: Agenda export to html error
          2009-07-12 18:15     ` Nick Dokos
        @ 2009-07-12 19:15       ` Nicolas Goaziou
               [not found]         ` <n.goaziou@neuf.fr>
          0 siblings, 1 reply; 8+ messages in thread
        From: Nicolas Goaziou @ 2009-07-12 19:15 UTC (permalink / raw)
          To: nicholas.dokos; +Cc: Dan Davison, emacs-orgmode
        
        Nick Dokos <nicholas.dokos@hp.com> writes:
        
        > Check your load-path - sometimes, packages take too many freedoms with
        > it.
        
        Here is my load-path :
        
        (setq load-path
              (append load-path
                      (list
                       "~/.emacs.d/elisp"
                       "~/.emacs.d/etc"
                       "~/.emacs.d/elisp/yasnippet-0.5.10"
                       "~/.emacs.d/elisp/org-mode/lisp"
                       "~/.emacs.d/elisp/org-mode/contrib/lisp")))
        
        I don't see anything that could be wrong.
        
        > locate-library is also useful to see from where a package is loaded:
        >
        >    (locate-library "htmlize")
        
        You are right. I tend to forget about this function. Alas, in that case,
        this will give me the "who" but not the "why".
        
        -- 
        Nicolas Goaziou
        
        ^ permalink raw reply	[flat|nested] 8+ messages in thread

      • • [parent not found: <n.goaziou@neuf.fr>]

        • • * Re: Agenda export to html error
                   [not found]         ` <n.goaziou@neuf.fr>
            @ 2009-07-12 20:39           ` Nick Dokos
              2009-07-12 21:47             ` Nicolas Goaziou
              0 siblings, 1 reply; 8+ messages in thread
            From: Nick Dokos @ 2009-07-12 20:39 UTC (permalink / raw)
              To: nicholas.dokos, Dan Davison, emacs-orgmode
            
            Nicolas Goaziou <n.goaziou@neuf.fr> wrote:
            
            > Nick Dokos <nicholas.dokos@hp.com> writes:
            > 
            > > Check your load-path - sometimes, packages take too many freedoms with
            > > it.
            > 
            > Here is my load-path :
            > 
            > (setq load-path
            >       (append load-path
            >               (list
            >                "~/.emacs.d/elisp"
            >                "~/.emacs.d/etc"
            >                "~/.emacs.d/elisp/yasnippet-0.5.10"
            >                "~/.emacs.d/elisp/org-mode/lisp"
            >                "~/.emacs.d/elisp/org-mode/contrib/lisp")))
            > 
            > I don't see anything that could be wrong.
            > 
            
            Well, you are appending your stuff at the end of whatever emacs sets it to,
            so it prefers *its* directories over yours.
            
            I also meant that you should ask emacs what *it* thinks its load path is:
            
              C-h v load-path
            
            That may differ wildly from what you think it is.
            
            As an aside, I think (but I am not sure) that part of the debian/ubuntu
            problem that people have been running into is that the convoluted
            loading of packages causes load-path to be set in such a way that the
            user *cannot* override the setting from his/her own init files; one has
            to find and edit/delete system files (in /etc/emacs or thereabouts).
            
            > > locate-library is also useful to see from where a package is loaded:
            > >
            > >    (locate-library "htmlize")
            > 
            > You are right. I tend to forget about this function. Alas, in that case,
            > this will give me the "who" but not the "why".
            > 
            
            It's another debugging tool. In combination with the value of load-path,
            it can guide you in the right direction.
            
            Nick
            
            ^ permalink raw reply	[flat|nested] 8+ messages in thread

          • • * Re: Agenda export to html error
                2009-07-12 20:39           ` Nick Dokos
              @ 2009-07-12 21:47             ` Nicolas Goaziou
                2009-07-12 23:24               ` Eric S Fraga
                0 siblings, 1 reply; 8+ messages in thread
              From: Nicolas Goaziou @ 2009-07-12 21:47 UTC (permalink / raw)
                To: nicholas.dokos; +Cc: Dan Davison, emacs-orgmode
              
              Nick Dokos <nicholas.dokos@hp.com> writes:
              
              > Well, you are appending your stuff at the end of whatever emacs sets it to,
              > so it prefers *its* directories over yours.
              
              Understood.
              
              This new load-path is better then :
              
              (setq load-path
                    (append (list
                             "~/.emacs.d/elisp"
                             "~/.emacs.d/elisp/yasnippet-0.5.10"
                             "~/.emacs.d/elisp/magit"
                             "~/.emacs.d/elisp/org-mode/lisp"
                             "~/.emacs.d/elisp/org-mode/contrib/lisp")
                            load-path
                            (list
                             "~/.emacs.d/etc")))
              
              As a side note, .emacs.d/etc, holding my gnus.el must be put at the end.
              Otherwise, I get some load recursive error.
              
              Thanks for pointing me on the right direction.
              
              -- 
              Nicolas Goaziou
              
              ^ permalink raw reply	[flat|nested] 8+ messages in thread

            • • * Re: Agenda export to html error
                  2009-07-12 21:47             ` Nicolas Goaziou
                @ 2009-07-12 23:24               ` Eric S Fraga
                  0 siblings, 0 replies; 8+ messages in thread
                From: Eric S Fraga @ 2009-07-12 23:24 UTC (permalink / raw)
                  To: nicholas.dokos, Dan Davison, emacs-orgmode
                
                At Sun, 12 Jul 2009 23:47:12 +0200,
                Nicolas Goaziou wrote:
                
                > (setq load-path
                >       (append (list
                >                "~/.emacs.d/elisp"
                >                "~/.emacs.d/elisp/yasnippet-0.5.10"
                >                "~/.emacs.d/elisp/magit"
                >                "~/.emacs.d/elisp/org-mode/lisp"
                >                "~/.emacs.d/elisp/org-mode/contrib/lisp")
                >               load-path
                >               (list
                >                "~/.emacs.d/etc")))
                
                You might find it easier to use add-to-list which prepends entries to
                the list...
                
                > As a side note, .emacs.d/etc, holding my gnus.el must be put at the end.
                > Otherwise, I get some load recursive error.
                
                with gnus, isn't it easier/better to simply have a ~/.gnus file?  But
                it's been a while since I used gnus so possibly ignore this comment!
                
                ^ permalink raw reply	[flat|nested] 8+ messages in thread

end of thread, other threads:[~2009-07-12 23:24 UTC | newest]

Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2009-07-12 15:10 Agenda export to html error Nicolas Goaziou
2009-07-12 16:21 ` Dan Davison
2009-07-12 17:42   ` Nicolas Goaziou
2009-07-12 18:15     ` Nick Dokos
2009-07-12 19:15       ` Nicolas Goaziou
     [not found]         ` <n.goaziou@neuf.fr>
2009-07-12 20:39           ` Nick Dokos
2009-07-12 21:47             ` Nicolas Goaziou
2009-07-12 23:24               ` Eric S Fraga

Code repositories for project(s) associated with this public inbox

	https://git.savannah.gnu.org/cgit/emacs/org-mode.git

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).