* Help installing org-mode on a MAC please? @ 2010-07-11 15:43 Erwin Panen 2010-07-12 14:30 ` Juan 2010-07-12 21:02 ` Stefan Vollmar 0 siblings, 2 replies; 8+ messages in thread From: Erwin Panen @ 2010-07-11 15:43 UTC (permalink / raw) To: emacs-orgmode Hi everyone, This is perhaps a trivial question, so please bear with me. I recently switched over to Mac, so I'm not familiar yet with all inside-out Mac. At first I installed Aquamacs, but to be more compatible I'd prefer to keep up with org-mode using git. I managed to install homebrew, next git, and was able to use git to get a clone of org-mode so that's allright. (using git clone git://repo.or.cz/org-mode.git) Next I tried to follow the FAQ: How do I keep current with Org mode development? (http://orgmode.org/worg/org-faq.php#keeping-current-with-Org-mode-development) When I do: $ cd org-mode && make && make doc && make install everything seems to go allright, but I get an error in the end complaining about LateX not being installed. So I installed MacTEX and tried running the above once more, with the same error. When I open up a terminal window and issue emacs, it opens up emacs allright, but I find no xemacs? Is this not included with org-mode.git? Thanks for helping out! Erwin ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Help installing org-mode on a MAC please? 2010-07-11 15:43 Help installing org-mode on a MAC please? Erwin Panen @ 2010-07-12 14:30 ` Juan 2010-07-29 13:37 ` Erwin Panen 2010-07-12 21:02 ` Stefan Vollmar 1 sibling, 1 reply; 8+ messages in thread From: Juan @ 2010-07-12 14:30 UTC (permalink / raw) To: Erwin Panen; +Cc: emacs-orgmode Hi Erwin, I'm using Mac also (not Aquamacs emacs, but EmacsForMacOSX instead). XEmacs is a completely different branch of Emacs, which I don't think is available for OSX. Then there is the text-mode emacs you run from the terminal. And then there is the emacs you installed (Aquamacs), which runs on its own graphics window (outside Terminal.app). So don't confuse those 3 emacs versions. You only need to install LaTeX if you want to build the documentation (make doc). This is not strictly necessary. Also, I have to modify the Makefile from org-mode to fit my emacs installation. Aquamacs emacs should be similar, just check the exact location of the Emacs application and change accordingly. This is how my org-mode Makefile looks: 8<------------------------------------------------------------ ##---------------------------------------------------------------------- ## YOU MUST EDIT THE FOLLOWING LINES ##---------------------------------------------------------------------- # Name of your emacs binary EMACS=/Applications/Emacs.app/Contents/MacOS/Emacs # Where local software is found prefix=/Applications/Emacs.app # Where local lisp files go. lispdir = $(prefix)/Contents/Resources/lisp/org # Where info files go. infodir = $(prefix)/Contents/Resources/info 8<------------------------------------------------------------ The rest of the Makefile you leave as is. Hope this helps. Regards, .j. On Sun, Jul 11, 2010 at 05:43:26PM +0200, Erwin Panen wrote: > I recently switched over to Mac, so I'm not familiar yet with all > inside-out Mac. At first I installed Aquamacs, but to be more > compatible I'd prefer to keep up with org-mode using git. > > I managed to install homebrew, next git, and was able to use git to > get a clone of org-mode so that's allright. > (using git clone git://repo.or.cz/org-mode.git) > Next I tried to follow the FAQ: How do I keep current with Org mode > development? (http://orgmode.org/worg/org-faq.php#keeping-current-with-Org-mode-development) > > When I do: $ cd org-mode && make && make doc && make install > everything seems to go allright, but I get an error in the end > complaining about LateX not being installed. > So I installed MacTEX and tried running the above once more, with > the same error. > > When I open up a terminal window and issue emacs, it opens up emacs > allright, but I find no xemacs? Is this not included with > org-mode.git? ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Help installing org-mode on a MAC please? 2010-07-12 14:30 ` Juan @ 2010-07-29 13:37 ` Erwin Panen 2010-07-29 14:04 ` Juan 0 siblings, 1 reply; 8+ messages in thread From: Erwin Panen @ 2010-07-29 13:37 UTC (permalink / raw) To: Juan; +Cc: emacs-orgmode Hi Juan, Thanks a lot for your information and help! I've edited my makefile according to your example, and everything ran without any error, so thanks a lot for that. I must admit being somehow confused with all my previous trials dispersed over the past couple of months.... I know I've also installed fink, and I also have emacs under fink somewhere. Next to that I also had Aquamacs, and Emcsformacosx. In the mean time I decided to stick with Emacsformacosx for the time being, the reason being that I want to have as much "standard" behaviour as possible. I'm also looking into setting up org-mode with MobileOrg. I use DropBox for cloud storage. Now I copied over my .emacs config file from my winXP box to my Mac. Of course this is a lot different if only for the path and pathstructure. Now I seem to find e.g. that emacsformacosx is incomplete (if I'm correct). I don't find any bbdb nor the typical lisp folder.... (GNU Emacs 23.2.1 (x86_64-apple-darwin, NS apple-appkit-1038.29 of 2010-05-09 on black.local) I also suffer from keyboard shortcut difficulties. (I'm on azerty / laptop keyb) I'm totally unable to get square brackets on my Mac. I can type them in other applications, but not in Emacs. Do you know of a way around this? Thanks for helping out, Erwin On 12/07/2010 16:30, Juan wrote: > Hi Erwin, > > I'm using Mac also (not Aquamacs emacs, but EmacsForMacOSX instead). > > XEmacs is a completely different branch of Emacs, which I don't think > is available for OSX. > > Then there is the text-mode emacs you run from the terminal. > > And then there is the emacs you installed (Aquamacs), which runs on > its own graphics window (outside Terminal.app). > > So don't confuse those 3 emacs versions. > > You only need to install LaTeX if you want to build the documentation > (make doc). This is not strictly necessary. > > Also, I have to modify the Makefile from org-mode to fit my emacs > installation. Aquamacs emacs should be similar, just check the exact > location of the Emacs application and change accordingly. > > This is how my org-mode Makefile looks: > > 8<------------------------------------------------------------ > ##---------------------------------------------------------------------- > ## YOU MUST EDIT THE FOLLOWING LINES > ##---------------------------------------------------------------------- > > # Name of your emacs binary > EMACS=/Applications/Emacs.app/Contents/MacOS/Emacs > > # Where local software is found > prefix=/Applications/Emacs.app > > # Where local lisp files go. > lispdir = $(prefix)/Contents/Resources/lisp/org > > # Where info files go. > infodir = $(prefix)/Contents/Resources/info > 8<------------------------------------------------------------ > > The rest of the Makefile you leave as is. > > Hope this helps. > > Regards, > .j. > > On Sun, Jul 11, 2010 at 05:43:26PM +0200, Erwin Panen wrote: > >> I recently switched over to Mac, so I'm not familiar yet with all >> inside-out Mac. At first I installed Aquamacs, but to be more >> compatible I'd prefer to keep up with org-mode using git. >> >> I managed to install homebrew, next git, and was able to use git to >> get a clone of org-mode so that's allright. >> (using git clone git://repo.or.cz/org-mode.git) >> Next I tried to follow the FAQ: How do I keep current with Org mode >> development? (http://orgmode.org/worg/org-faq.php#keeping-current-with-Org-mode-development) >> >> When I do: $ cd org-mode&& make&& make doc&& make install >> everything seems to go allright, but I get an error in the end >> complaining about LateX not being installed. >> So I installed MacTEX and tried running the above once more, with >> the same error. >> >> When I open up a terminal window and issue emacs, it opens up emacs >> allright, but I find no xemacs? Is this not included with >> org-mode.git? >> ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Help installing org-mode on a MAC please? 2010-07-29 13:37 ` Erwin Panen @ 2010-07-29 14:04 ` Juan 2010-07-29 14:11 ` Erwin Panen 0 siblings, 1 reply; 8+ messages in thread From: Juan @ 2010-07-29 14:04 UTC (permalink / raw) To: Erwin Panen; +Cc: emacs-orgmode On Thu, Jul 29, 2010 at 03:37:29PM +0200, Erwin Panen wrote: > Now I copied over my .emacs config file from my winXP box to my Mac. > Of course this is a lot different if only for the path and > pathstructure. In order to have the same .emacs both in mac & linux, I use the following contitionals in several places in my .emacs: 8<------------------------------------------------------------ ;;;; MAC ONLY MAC ONLY ------------------------------ (when (eq system-type 'darwin) (set-exec-path-from-shell-PATH) (add-to-list 'exec-path "/Users/jips/bin" ) ;; MAC ONLY: locate -> mdfind (spotlight) (setq locate-command "mdfind") ;; command-` to switch frames (global-set-key [?\M-`] 'other-frame) ; # This sets the key binding (setq mac-option-key-is-meta nil) (setq mac-command-key-is-meta t) (setq mac-command-modifier 'meta) (setq mac-option-modifier nil) ;; JABBER (add-to-list 'load-path "~/.emacs_stuff/emacs-jabber-0.8.0") (require 'jabber-autoloads) ) 8<------------------------------------------------------------ You may find appropriate tests for your winXP, etc. > Now I seem to find e.g. that emacsformacosx is incomplete (if I'm correct). > I don't find any bbdb nor the typical lisp folder.... > (GNU Emacs 23.2.1 (x86_64-apple-darwin, NS apple-appkit-1038.29 of > 2010-05-09 on black.local) Maybe the above (setq mac... statements help with getting the correct behaviour for Command and Option(Alt). > I also suffer from keyboard shortcut difficulties. (I'm on azerty / > laptop keyb) Ugh! Fortunately I live 11000km away from AZERTY keyboards. I use both english and spanish keyboard layouts. The Alt key works OK for special keys (accents, etc.). > I'm totally unable to get square brackets on my Mac. I can type them > in other applications, but not in Emacs. > Do you know of a way around this? A + .j. ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Help installing org-mode on a MAC please? 2010-07-29 14:04 ` Juan @ 2010-07-29 14:11 ` Erwin Panen 2010-07-29 14:49 ` Juan 0 siblings, 1 reply; 8+ messages in thread From: Erwin Panen @ 2010-07-29 14:11 UTC (permalink / raw) To: Juan; +Cc: emacs-orgmode Juan, wow, that was fast :-) How do you get your lisp folder with all the typical .el files on your Mac? I can't seem to find bbdb.. Do you install each and every manually? Muchas gracias :-) Erwin On 29/07/2010 16:04, Juan wrote: > On Thu, Jul 29, 2010 at 03:37:29PM +0200, Erwin Panen wrote: > >> Now I copied over my .emacs config file from my winXP box to my Mac. >> Of course this is a lot different if only for the path and >> pathstructure. >> > In order to have the same .emacs both in mac& linux, I use the > following contitionals in several places in my .emacs: > > 8<------------------------------------------------------------ > > ;;;; MAC ONLY MAC ONLY ------------------------------ > (when (eq system-type 'darwin) > (set-exec-path-from-shell-PATH) > (add-to-list 'exec-path "/Users/jips/bin" ) > > ;; MAC ONLY: locate -> mdfind (spotlight) > (setq locate-command "mdfind") > > ;; command-` to switch frames > (global-set-key [?\M-`] 'other-frame) ; # This sets the key binding > > (setq mac-option-key-is-meta nil) > (setq mac-command-key-is-meta t) > (setq mac-command-modifier 'meta) > (setq mac-option-modifier nil) > > ;; JABBER > (add-to-list 'load-path "~/.emacs_stuff/emacs-jabber-0.8.0") > (require 'jabber-autoloads) > ) > > 8<------------------------------------------------------------ > > You may find appropriate tests for your winXP, etc. > > >> Now I seem to find e.g. that emacsformacosx is incomplete (if I'm correct). >> I don't find any bbdb nor the typical lisp folder.... >> (GNU Emacs 23.2.1 (x86_64-apple-darwin, NS apple-appkit-1038.29 of >> 2010-05-09 on black.local) >> > Maybe the above (setq mac... statements help with getting the correct > behaviour for Command and Option(Alt). > > >> I also suffer from keyboard shortcut difficulties. (I'm on azerty / >> laptop keyb) >> > Ugh! Fortunately I live 11000km away from AZERTY keyboards. > > I use both english and spanish keyboard layouts. The Alt key works OK > for special keys (accents, etc.). > > >> I'm totally unable to get square brackets on my Mac. I can type them >> in other applications, but not in Emacs. >> Do you know of a way around this? >> > A + > .j. > ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Help installing org-mode on a MAC please? 2010-07-29 14:11 ` Erwin Panen @ 2010-07-29 14:49 ` Juan 0 siblings, 0 replies; 8+ messages in thread From: Juan @ 2010-07-29 14:49 UTC (permalink / raw) To: Erwin Panen; +Cc: emacs-orgmode On Thu, Jul 29, 2010 at 04:11:15PM +0200, Erwin Panen wrote: > How do you get your lisp folder with all the typical .el files on your Mac? > I can't seem to find bbdb.. > Do you install each and every manually? Apparently BBDB is not part of the standard emacs distribution (type F1 C-e and look for BBDB). I usually install extra packages inside a separate folder ( ~/.emacs_stuff/ ). Never installed bbdb though. Regards, .j. ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Help installing org-mode on a MAC please? 2010-07-11 15:43 Help installing org-mode on a MAC please? Erwin Panen 2010-07-12 14:30 ` Juan @ 2010-07-12 21:02 ` Stefan Vollmar 2010-07-29 13:23 ` Erwin Panen 1 sibling, 1 reply; 8+ messages in thread From: Stefan Vollmar @ 2010-07-12 21:02 UTC (permalink / raw) To: erwinpanen; +Cc: emacs-orgmode [-- Attachment #1.1: Type: text/plain, Size: 2161 bytes --] Dear Erwin, On 11.07.2010, at 17:43, Erwin Panen wrote: > This is perhaps a trivial question, so please bear with me. > > I recently switched over to Mac, so I'm not familiar yet with all inside-out Mac. At first I installed Aquamacs, but to be more compatible I'd prefer to keep up with org-mode using git. > > I managed to install homebrew, next git, and was able to use git to get a clone of org-mode so that's allright. > (using git clone git://repo.or.cz/org-mode.git) > Next I tried to follow the FAQ: How do I keep current with Org mode development? (http://orgmode.org/worg/org-faq.php#keeping-current-with-Org-mode-development) > > When I do: $ cd org-mode && make && make doc && make install > everything seems to go allright, but I get an error in the end complaining about LateX not being installed. > So I installed MacTEX and tried running the above once more, with the same error. Here is a small recipe for using the latest Org-mode development version with Aquamacs which works fine for me. (1) Do a git clone git://repo.or.cz/org-mode.git in some directory of your choide, e.g. your home directory. (I believe, you have already done that.) (2) cd to the new "org-mode" directory. Assuming you have installed Aquamacs in /Applications (default), change line 14 to: EMACS=/Applications/Aquamacs.app/Contents/MacOS/Aquamacs (3) make lisp/org-install.el (4) make compile (5) (optional and requires MacTeX or similar) make doc/org.pdf (6) Insert these lines in your .emacs file: (setq load-path (cons "~/org-mode/lisp" load-path)) (require 'org-install) this assumes that (1) created an org-mode directory in your home directory. (7) Restart Aquamacs (you can later find out about more subtle methods than restarting Emacs which does not take long these days) Warm regards, Stefan -- Dr. Stefan Vollmar, Dipl.-Phys. Head of IT group Max-Planck-Institut für neurologische Forschung Gleuelerstr. 50, 50931 Köln, Germany Tel.: +49-221-4726-213 FAX +49-221-4726-298 Tel.: +49-221-478-5713 Mobile: 0160-93874279 Email: vollmar@nf.mpg.de http://www.nf.mpg.de [-- Attachment #1.2: smime.p7s --] [-- Type: application/pkcs7-signature, Size: 4409 bytes --] [-- Attachment #2: Type: text/plain, Size: 201 bytes --] _______________________________________________ Emacs-orgmode mailing list Please use `Reply All' to send replies to the list. Emacs-orgmode@gnu.org http://lists.gnu.org/mailman/listinfo/emacs-orgmode ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Help installing org-mode on a MAC please? 2010-07-12 21:02 ` Stefan Vollmar @ 2010-07-29 13:23 ` Erwin Panen 0 siblings, 0 replies; 8+ messages in thread From: Erwin Panen @ 2010-07-29 13:23 UTC (permalink / raw) To: Stefan Vollmar; +Cc: emacs-orgmode Hi Stefan, Thanks a lot for your help, much appreciated. I've done some more searching and decided to delay using Aquamacs for now. My reasoning is that I at least want to try to remain as compatible as possible, i.e. linux, win XP and OS X. Being fairly new to OS X, I already suffer from differences in keyb shortcuts and such. For instance square brackets put me through a lot of trouble. I found (on azerty laptop kb) I can get square brackets in OS X using "option + shift + (" and "option + shift + )" However this will not work with Emacs.... Are there any specific differences in keyboard shortcuts for Aquamacs compared to "standard" emacs the way we find it on Windows and Linux? Thanks a lot, Erwin On 12/07/2010 23:02, Stefan Vollmar wrote: > Dear Erwin, > > On 11.07.2010, at 17:43, Erwin Panen wrote: > > >> This is perhaps a trivial question, so please bear with me. >> >> I recently switched over to Mac, so I'm not familiar yet with all inside-out Mac. At first I installed Aquamacs, but to be more compatible I'd prefer to keep up with org-mode using git. >> >> I managed to install homebrew, next git, and was able to use git to get a clone of org-mode so that's allright. >> (using git clone git://repo.or.cz/org-mode.git) >> Next I tried to follow the FAQ: How do I keep current with Org mode development? (http://orgmode.org/worg/org-faq.php#keeping-current-with-Org-mode-development) >> >> When I do: $ cd org-mode&& make&& make doc&& make install >> everything seems to go allright, but I get an error in the end complaining about LateX not being installed. >> So I installed MacTEX and tried running the above once more, with the same error. >> > > > Here is a small recipe for using the latest Org-mode development version with Aquamacs which works fine for me. > > (1) Do a > > git clone git://repo.or.cz/org-mode.git > > in some directory of your choide, e.g. your home directory. (I believe, you have already done that.) > > (2) cd to the new "org-mode" directory. Assuming you have installed Aquamacs in /Applications (default), change line 14 to: > > EMACS=/Applications/Aquamacs.app/Contents/MacOS/Aquamacs > > (3) make lisp/org-install.el > (4) make compile > > (5) (optional and requires MacTeX or similar) > make doc/org.pdf > > (6) Insert these lines in your .emacs file: > > (setq load-path (cons "~/org-mode/lisp" load-path)) > (require 'org-install) > > this assumes that (1) created an org-mode directory in your home directory. > > (7) Restart Aquamacs (you can later find out about more subtle methods than restarting Emacs which does not take long these days) > > Warm regards, > Stefan > ^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2010-07-29 14:49 UTC | newest] Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2010-07-11 15:43 Help installing org-mode on a MAC please? Erwin Panen 2010-07-12 14:30 ` Juan 2010-07-29 13:37 ` Erwin Panen 2010-07-29 14:04 ` Juan 2010-07-29 14:11 ` Erwin Panen 2010-07-29 14:49 ` Juan 2010-07-12 21:02 ` Stefan Vollmar 2010-07-29 13:23 ` Erwin Panen
Code repositories for project(s) associated with this public inbox https://git.savannah.gnu.org/cgit/emacs/org-mode.git This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).