* git repository via http broken
@ 2012-06-26 12:24 Jakob Lombacher
2012-06-26 15:14 ` Bernt Hansen
0 siblings, 1 reply; 11+ messages in thread
From: Jakob Lombacher @ 2012-06-26 12:24 UTC (permalink / raw)
To: emacs-orgmode
Hi.
It seems that git via http doesn't work anymore.
--
>> git clone http://orgmode.org/w/org-mode.git
fatal: http://orgmode.org/w/org-mode.git/info/refs not found: did you
run git update-server-info on the server?
--
Via git protocol it works just fine, but unfortunately the firewall in
my company restricts me to http.
Can anybody fix this? I'think the post-update-hook isn't set.
Jakob
Btw.
Here (http://orgmode.org/worg/org-contribute.html) are two different
url's given (http://orgmode.org/w/org-mode.git and
http://orgmode.org/org-mode.git). This is confusing.
^ permalink raw reply [flat|nested] 11+ messages in thread* Re: git repository via http broken 2012-06-26 12:24 git repository via http broken Jakob Lombacher @ 2012-06-26 15:14 ` Bernt Hansen 2012-06-26 15:20 ` Bernt Hansen 0 siblings, 1 reply; 11+ messages in thread From: Bernt Hansen @ 2012-06-26 15:14 UTC (permalink / raw) To: Jakob Lombacher; +Cc: emacs-orgmode Jakob Lombacher <kontakt@lombacher.net> writes: > It seems that git via http doesn't work anymore. > > -- >>> git clone http://orgmode.org/w/org-mode.git > fatal: http://orgmode.org/w/org-mode.git/info/refs not found: did you > run git update-server-info on the server? Hi Jakob, Wrong URL maybe? git clone http://orgmode.org/org-mode.git seems to work here. I think the /w/ URL is wrong. If you confirm that the above URL works without the /w/ I can fix the Worg page. Regards, Bernt > > -- > > Via git protocol it works just fine, but unfortunately the firewall in > my company restricts me to http. > Can anybody fix this? I'think the post-update-hook isn't set. > > Jakob > > Btw. > Here (http://orgmode.org/worg/org-contribute.html) are two different > url's given (http://orgmode.org/w/org-mode.git and > http://orgmode.org/org-mode.git). This is confusing. ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: git repository via http broken 2012-06-26 15:14 ` Bernt Hansen @ 2012-06-26 15:20 ` Bernt Hansen 2012-06-26 15:47 ` suvayu ali 2012-06-26 21:30 ` Jakob Lombacher 0 siblings, 2 replies; 11+ messages in thread From: Bernt Hansen @ 2012-06-26 15:20 UTC (permalink / raw) To: Jakob Lombacher; +Cc: emacs-orgmode Bernt Hansen <bernt@norang.ca> writes: > Jakob Lombacher <kontakt@lombacher.net> writes: >> Btw. >> Here (http://orgmode.org/worg/org-contribute.html) are two different >> url's given (http://orgmode.org/w/org-mode.git and >> http://orgmode.org/org-mode.git). This is confusing. > git clone http://orgmode.org/org-mode.git > > If you confirm that the above URL works without the /w/ I can fix the > Worg page. I can't find any references to the http://orgmode.org/w/org-mode.git for *cloning* the repository in worg. These links are for users to browse the repository online - not for cloning with git. Regards, Bernt ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: git repository via http broken 2012-06-26 15:20 ` Bernt Hansen @ 2012-06-26 15:47 ` suvayu ali 2012-06-26 21:30 ` Jakob Lombacher 1 sibling, 0 replies; 11+ messages in thread From: suvayu ali @ 2012-06-26 15:47 UTC (permalink / raw) To: Bernt Hansen; +Cc: emacs-orgmode On Tue, Jun 26, 2012 at 5:20 PM, Bernt Hansen <bernt@norang.ca> wrote: > I can't find any references to the http://orgmode.org/w/org-mode.git for > *cloning* the repository in worg. These links are for users to browse > the repository online - not for cloning with git. Maybe the various cloning urls could be shown on gitweb as done on the repo.or.cz mirror? <http://repo.or.cz/w/org-mode.git> -- Suvayu Open source is the future. It sets us free. ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: git repository via http broken 2012-06-26 15:20 ` Bernt Hansen 2012-06-26 15:47 ` suvayu ali @ 2012-06-26 21:30 ` Jakob Lombacher 2012-06-26 22:05 ` Nick Dokos 2012-06-26 23:37 ` Bernt Hansen 1 sibling, 2 replies; 11+ messages in thread From: Jakob Lombacher @ 2012-06-26 21:30 UTC (permalink / raw) To: Bernt Hansen; +Cc: emacs-orgmode That I misunderstood. I thought this URL was for cloning as well. Because there I got at least that error message es response. Using http://orgmode.org/org-mode.git I don't get any response at all. Is there a possibility to clone orgmode via http? Jakob 2012/6/26 Bernt Hansen <bernt@norang.ca>: > Bernt Hansen <bernt@norang.ca> writes: > >> Jakob Lombacher <kontakt@lombacher.net> writes: > >>> Btw. >>> Here (http://orgmode.org/worg/org-contribute.html) are two different >>> url's given (http://orgmode.org/w/org-mode.git and >>> http://orgmode.org/org-mode.git). This is confusing. > >> git clone http://orgmode.org/org-mode.git >> > >> If you confirm that the above URL works without the /w/ I can fix the >> Worg page. > > I can't find any references to the http://orgmode.org/w/org-mode.git for > *cloning* the repository in worg. These links are for users to browse > the repository online - not for cloning with git. > > Regards, > Bernt ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: git repository via http broken 2012-06-26 21:30 ` Jakob Lombacher @ 2012-06-26 22:05 ` Nick Dokos 2012-06-27 0:46 ` Nick Dokos ` (2 more replies) 2012-06-26 23:37 ` Bernt Hansen 1 sibling, 3 replies; 11+ messages in thread From: Nick Dokos @ 2012-06-26 22:05 UTC (permalink / raw) To: Jakob Lombacher; +Cc: Bernt Hansen, emacs-orgmode Jakob Lombacher <kontakt@lombacher.net> wrote: > That I misunderstood. I thought this URL was for cloning as well. > Because there I got at least that error message es response. > > Using http://orgmode.org/org-mode.git I don't get any response at all. > Did you wait long enough? http is *very* slow and there is no progress feedback during the cloning: ,---- | $ time git clone http://orgmode.org/org-mode.git | Cloning into org-mode... | | real 5m5.885s | user 0m22.610s | sys 0m3.660s `---- Using the system monitor applet in Gnome, I see my (gigabit ethernet) link getting pretty much saturated and I see regular "ticks" on the disk, so things get trasmitted and saved, but it took more than five minutes for the whole thing to clone (vs. 2.5 mins for a clone over git - which also meters progress so you can that it's doing something). OTOH, atm I'm not behind a firewall and it's conceivable that your IT department has shut off access to orgmode somehow. I'd talk to them about it. Also, if they provide a socks proxy, you might be able to clone over git using socksify or tsocks and avoid the pain of http. Nick PS BTW, I know that git gc is recommended on local repos, but is that applicable to the repo on orgmode.org? and would that help with the cloning time? 2.5 mins seems long to me. If not gc, is there something else that would help? > Is there a possibility to clone orgmode via http? > > Jakob > > > > 2012/6/26 Bernt Hansen <bernt@norang.ca>: > > Bernt Hansen <bernt@norang.ca> writes: > > > >> Jakob Lombacher <kontakt@lombacher.net> writes: > > > >>> Btw. > >>> Here (http://orgmode.org/worg/org-contribute.html) are two different > >>> url's given (http://orgmode.org/w/org-mode.git and > >>> http://orgmode.org/org-mode.git). This is confusing. > > > >> git clone http://orgmode.org/org-mode.git > >> > > > >> If you confirm that the above URL works without the /w/ I can fix the > >> Worg page. > > > > I can't find any references to the http://orgmode.org/w/org-mode.git for > > *cloning* the repository in worg. These links are for users to browse > > the repository online - not for cloning with git. > > > > Regards, > > Bernt > ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: git repository via http broken 2012-06-26 22:05 ` Nick Dokos @ 2012-06-27 0:46 ` Nick Dokos 2012-06-27 6:12 ` Jakob Lombacher 2012-06-29 16:49 ` Jason Dunsmore 2 siblings, 0 replies; 11+ messages in thread From: Nick Dokos @ 2012-06-27 0:46 UTC (permalink / raw) Cc: Bernt Hansen, emacs-orgmode Nick Dokos <nicholas.dokos@hp.com> wrote: > Using the system monitor applet in Gnome, I see my (gigabit ethernet) > link getting pretty much saturated... Duh - my gigabit ethernet was turned off at the time, so it was using the wifi connection - no wonder it was saturated. But it's still some significant fraction of 54Mb/s, so it's probably not the weakest link: the time should not change much (I just checked: it didn't). Nick ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: git repository via http broken 2012-06-26 22:05 ` Nick Dokos 2012-06-27 0:46 ` Nick Dokos @ 2012-06-27 6:12 ` Jakob Lombacher 2012-06-29 16:49 ` Jason Dunsmore 2 siblings, 0 replies; 11+ messages in thread From: Jakob Lombacher @ 2012-06-27 6:12 UTC (permalink / raw) To: emacs-orgmode No I haven't waited long enough. :-S It took so long, that somehow I thought it was broken ... sry. Thanks for your help! Jakob 2012/6/27 Nick Dokos <nicholas.dokos@hp.com>: > Jakob Lombacher <kontakt@lombacher.net> wrote: > >> That I misunderstood. I thought this URL was for cloning as well. >> Because there I got at least that error message es response. >> >> Using http://orgmode.org/org-mode.git I don't get any response at all. >> > > Did you wait long enough? http is *very* slow and there is no progress > feedback during the cloning: > > ,---- > | $ time git clone http://orgmode.org/org-mode.git > | Cloning into org-mode... > | > | real 5m5.885s > | user 0m22.610s > | sys 0m3.660s > `---- > > Using the system monitor applet in Gnome, I see my (gigabit ethernet) > link getting pretty much saturated and I see regular "ticks" on the > disk, so things get trasmitted and saved, but it took more than five > minutes for the whole thing to clone (vs. 2.5 mins for a clone over git > - which also meters progress so you can that it's doing something). > > OTOH, atm I'm not behind a firewall and it's conceivable that your IT > department has shut off access to orgmode somehow. I'd talk to them > about it. Also, if they provide a socks proxy, you might be able to > clone over git using socksify or tsocks and avoid the pain of http. > > Nick > > PS BTW, I know that git gc is recommended on local repos, but is that > applicable to the repo on orgmode.org? and would that help with the > cloning time? 2.5 mins seems long to me. If not gc, is there > something else that would help? > > >> Is there a possibility to clone orgmode via http? >> >> Jakob >> >> >> >> 2012/6/26 Bernt Hansen <bernt@norang.ca>: >> > Bernt Hansen <bernt@norang.ca> writes: >> > >> >> Jakob Lombacher <kontakt@lombacher.net> writes: >> > >> >>> Btw. >> >>> Here (http://orgmode.org/worg/org-contribute.html) are two different >> >>> url's given (http://orgmode.org/w/org-mode.git and >> >>> http://orgmode.org/org-mode.git). This is confusing. >> > >> >> git clone http://orgmode.org/org-mode.git >> >> >> > >> >> If you confirm that the above URL works without the /w/ I can fix the >> >> Worg page. >> > >> > I can't find any references to the http://orgmode.org/w/org-mode.git for >> > *cloning* the repository in worg. These links are for users to browse >> > the repository online - not for cloning with git. >> > >> > Regards, >> > Bernt >> ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: git repository via http broken 2012-06-26 22:05 ` Nick Dokos 2012-06-27 0:46 ` Nick Dokos 2012-06-27 6:12 ` Jakob Lombacher @ 2012-06-29 16:49 ` Jason Dunsmore 2012-06-29 17:50 ` Nick Dokos 2 siblings, 1 reply; 11+ messages in thread From: Jason Dunsmore @ 2012-06-29 16:49 UTC (permalink / raw) To: nicholas.dokos; +Cc: Bernt Hansen, emacs-orgmode On Tue, Jun 26 2012, Nick Dokos wrote: > PS BTW, I know that git gc is recommended on local repos, but is that > applicable to the repo on orgmode.org? and would that help with the > cloning time? 2.5 mins seems long to me. If not gc, is there > something else that would help? Hi Nick, It looks like "git gc" was needed on the server. Before git gc on server: --8<---------------cut here---------------start------------->8--- $ time git clone git://orgmode.org/org-mode.git Cloning into org-mode... remote: Counting objects: 62414, done. <- Server disk I/O bottleneck remote: Compressing objects: 100% (18532/18532), done. <- Server CPU bottleneck remote: Total 62414 (delta 49455), reused 55032 (delta 43761) Receiving objects: 100% (62414/62414), 55.46 MiB | 1.16 MiB/s, done. <- Network bottleneck Resolving deltas: 100% (49455/49455), done. <- Local CPU bottleneck real2m44.757s user0m11.269s sys0m0.740s --8<---------------cut here---------------end--------------->8--- After git gc on server: --8<---------------cut here---------------start------------->8--- $ time git clone git://orgmode.org/org-mode.git Cloning into org-mode... remote: Counting objects: 62414, done. remote: Compressing objects: 100% (12836/12836), done. remote: Total 62414 (delta 49457), reused 62414 (delta 49457) Receiving objects: 100% (62414/62414), 55.41 MiB | 1.12 MiB/s, done. Resolving deltas: 100% (49457/49457), done. real0m59.071s user0m11.305s sys0m0.668s --8<---------------cut here---------------end--------------->8--- I've set up a weekly cron job to run "git gc" on the org-mode repo. Jason ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: git repository via http broken 2012-06-29 16:49 ` Jason Dunsmore @ 2012-06-29 17:50 ` Nick Dokos 0 siblings, 0 replies; 11+ messages in thread From: Nick Dokos @ 2012-06-29 17:50 UTC (permalink / raw) To: Jason Dunsmore; +Cc: Bernt Hansen, emacs-orgmode Jason Dunsmore <jasondunsmore@gmail.com> wrote: > On Tue, Jun 26 2012, Nick Dokos wrote: > > > PS BTW, I know that git gc is recommended on local repos, but is that > > applicable to the repo on orgmode.org? and would that help with the > > cloning time? 2.5 mins seems long to me. If not gc, is there > > something else that would help? > > Hi Nick, > > It looks like "git gc" was needed on the server. > > Before git gc on server: > > $ time git clone git://orgmode.org/org-mode.git > Cloning into org-mode... > remote: Counting objects: 62414, done. <- Server disk I/O bottleneck > remote: Compressing objects: 100% (18532/18532), done. <- Server CPU bottleneck > remote: Total 62414 (delta 49455), reused 55032 (delta 43761) > Receiving objects: 100% (62414/62414), 55.46 MiB | 1.16 MiB/s, done. <- Network bottleneck > Resolving deltas: 100% (49455/49455), done. <- Local CPU bottleneck > > real2m44.757s > user0m11.269s > sys0m0.740s > > After git gc on server: > > $ time git clone git://orgmode.org/org-mode.git > Cloning into org-mode... > remote: Counting objects: 62414, done. > remote: Compressing objects: 100% (12836/12836), done. > remote: Total 62414 (delta 49457), reused 62414 (delta 49457) > Receiving objects: 100% (62414/62414), 55.41 MiB | 1.12 MiB/s, done. > Resolving deltas: 100% (49457/49457), done. > > real0m59.071s > user0m11.305s > sys0m0.668s > That's a pretty good speed-up! I tried the same with http just now and got: $ time git clone http://orgmode.org/org-mode.git Cloning into org-mode... real 3m30.619s user 0m10.970s sys 0m0.750s so it improved on the 5 mins I was getting before by roughly 35%. My git time was pretty bad though (4.5 mins): I suspect clogging on the link to my ISP, so both of these numbers are probably suspect. I'll try again later tonight and see what I get. > I've set up a weekly cron job to run "git gc" on the org-mode repo. > Great! Thanks, Nick ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: git repository via http broken 2012-06-26 21:30 ` Jakob Lombacher 2012-06-26 22:05 ` Nick Dokos @ 2012-06-26 23:37 ` Bernt Hansen 1 sibling, 0 replies; 11+ messages in thread From: Bernt Hansen @ 2012-06-26 23:37 UTC (permalink / raw) To: Jakob Lombacher; +Cc: emacs-orgmode Jakob Lombacher <kontakt@lombacher.net> writes: > That I misunderstood. I thought this URL was for cloning as well. > Because there I got at least that error message es response. > > Using http://orgmode.org/org-mode.git I don't get any response at all. > > Is there a possibility to clone orgmode via http? Yes I successfully clone it from the above URL but as Nick states it takes a long time. -Bernt > > Jakob > > > > 2012/6/26 Bernt Hansen <bernt@norang.ca>: >> Bernt Hansen <bernt@norang.ca> writes: >> >>> Jakob Lombacher <kontakt@lombacher.net> writes: >> >>>> Btw. >>>> Here (http://orgmode.org/worg/org-contribute.html) are two different >>>> url's given (http://orgmode.org/w/org-mode.git and >>>> http://orgmode.org/org-mode.git). This is confusing. >> >>> git clone http://orgmode.org/org-mode.git >>> >> >>> If you confirm that the above URL works without the /w/ I can fix the >>> Worg page. >> >> I can't find any references to the http://orgmode.org/w/org-mode.git for >> *cloning* the repository in worg. These links are for users to browse >> the repository online - not for cloning with git. >> >> Regards, >> Bernt ^ permalink raw reply [flat|nested] 11+ messages in thread
end of thread, other threads:[~2012-06-29 17:57 UTC | newest] Thread overview: 11+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2012-06-26 12:24 git repository via http broken Jakob Lombacher 2012-06-26 15:14 ` Bernt Hansen 2012-06-26 15:20 ` Bernt Hansen 2012-06-26 15:47 ` suvayu ali 2012-06-26 21:30 ` Jakob Lombacher 2012-06-26 22:05 ` Nick Dokos 2012-06-27 0:46 ` Nick Dokos 2012-06-27 6:12 ` Jakob Lombacher 2012-06-29 16:49 ` Jason Dunsmore 2012-06-29 17:50 ` Nick Dokos 2012-06-26 23:37 ` Bernt Hansen
Code repositories for project(s) associated with this public inbox https://git.savannah.gnu.org/cgit/emacs/org-mode.git This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).