* Failure to display more than 18 images with captions @ 2016-10-01 7:19 Jean Louis 2016-10-01 10:39 ` Nicolas Goaziou 2016-10-01 14:26 ` John Kitchin 0 siblings, 2 replies; 11+ messages in thread From: Jean Louis @ 2016-10-01 7:19 UTC (permalink / raw) To: emacs-orgmode Hello, I have problem with Org Mode, that it fails to display more than 18 images correctly, while exporting to PDF (LaTeX export). I am using images in following manner: #+CAPTION: Title of image #+NAME: fig:pic001 [[/some/image001.jpg]] #+CAPTION: Title of image #+NAME: fig:pic002 [[/some/image002.jpg]] #+CAPTION: Title of image #+NAME: fig:pic003 [[/some/image003.jpg]] .... and so on until 40-50 images ... #+CAPTION: Title of image #+NAME: fig:pic060 [[/some/image060.jpg]] If I only put links without CAPTION and NAME, the export is working well, but images are not nicely formatted. If I am using CAPTION without NAME, I get the same problem, so only 18 images are displayed. I have tried to display random images, to verify is it about the link or what would be the cause, but always 18 images are displayed. Few images are displayed on the side of the PDF, cut, not visible, covering the right side border of the PDF file. I would really need help to get it working, as I use Org Mode for reporting. Thank you, J. Louis ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: Failure to display more than 18 images with captions 2016-10-01 7:19 Failure to display more than 18 images with captions Jean Louis @ 2016-10-01 10:39 ` Nicolas Goaziou 2016-10-01 10:44 ` Jean Louis 2016-10-01 14:26 ` John Kitchin 1 sibling, 1 reply; 11+ messages in thread From: Nicolas Goaziou @ 2016-10-01 10:39 UTC (permalink / raw) To: Jean Louis; +Cc: emacs-orgmode Hello, Jean Louis <guix@rcdrun.com> writes: > I have problem with Org Mode, that it fails to display more than 18 > images correctly, while exporting to PDF (LaTeX export). Would it be a problem related to LaTeX? I.e, what is the error when you try to compile the produced tex file? Regards, -- Nicolas Goaziou ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: Failure to display more than 18 images with captions 2016-10-01 10:39 ` Nicolas Goaziou @ 2016-10-01 10:44 ` Jean Louis 0 siblings, 0 replies; 11+ messages in thread From: Jean Louis @ 2016-10-01 10:44 UTC (permalink / raw) To: emacs-orgmode Majority of LaTeX errors are like following: LaTeX Error: Cannot determine size of graphic in /home/data1/protected/public_html/images/syogm/tanzania/2016/09/2016-09-20/800/IMG_20160920_090633975.jpg (no BoundingBox). and then also: l.235 \begin{figure}[htb] ? ! Undefined control sequence. \@xfloat ...@fltovf \fi \global \setbox \@currbox \color@vbox \normalcolor \... l.235 \begin{figure}[htb] ? ! Missing number, treated as zero. <to be read again> \vbox l.235 \begin{figure}[htb] and also Undefined control sequence. \@largefloatcheck ->\ifdim \ht \@currbox >\textheight \@tempdima -\textheigh... l.240 \end{figure} ? ! Missing number, treated as zero. <to be read again> > l.240 \end{figure} ? ! Undefined control sequence. <argument> \@currbox l.240 \end{figure} On Sat, Oct 01, 2016 at 12:39:35PM +0200, Nicolas Goaziou wrote: > Hello, > > Jean Louis <guix@rcdrun.com> writes: > > > I have problem with Org Mode, that it fails to display more than 18 > > images correctly, while exporting to PDF (LaTeX export). > > Would it be a problem related to LaTeX? I.e, what is the error when you > try to compile the produced tex file? > > Regards, > > -- > Nicolas Goaziou ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: Failure to display more than 18 images with captions 2016-10-01 7:19 Failure to display more than 18 images with captions Jean Louis 2016-10-01 10:39 ` Nicolas Goaziou @ 2016-10-01 14:26 ` John Kitchin 2016-10-01 14:56 ` Jean Louis 1 sibling, 1 reply; 11+ messages in thread From: John Kitchin @ 2016-10-01 14:26 UTC (permalink / raw) To: Jean Louis; +Cc: emacs-orgmode this looks like an issue related to floats. It works with out the caption because they are not floats in that case. But, with floats, there are limits. see http://tex.stackexchange.com/questions/46512/too-many-unprocessed-floats. According to that page: LaTeX can, by default, only cope with 18 outstanding floats; any more, and you get the error “too many unsuppressed floats”. This package releases the limit; TeX itself imposes limits (which are interdependent of the help offered by e-TeX). However, if your floats can’t be placed anywhere, extending the number of floats merely delays the arrival of the inevitable error message. You may be able to add \clearpage every few figures or use a package that makes this work. Jean Louis writes: > Hello, > > I have problem with Org Mode, that it fails to display more than 18 > images correctly, while exporting to PDF (LaTeX export). > > I am using images in following manner: > > #+CAPTION: Title of image > #+NAME: fig:pic001 > [[/some/image001.jpg]] > > #+CAPTION: Title of image > #+NAME: fig:pic002 > [[/some/image002.jpg]] > > #+CAPTION: Title of image > #+NAME: fig:pic003 > [[/some/image003.jpg]] > > .... and so on until 40-50 images ... > > #+CAPTION: Title of image > #+NAME: fig:pic060 > [[/some/image060.jpg]] > > If I only put links without CAPTION and NAME, the export is working > well, but images are not nicely formatted. If I am using CAPTION without > NAME, I get the same problem, so only 18 images are displayed. > > I have tried to display random images, to verify is it about the link or > what would be the cause, but always 18 images are displayed. > > Few images are displayed on the side of the PDF, cut, not visible, > covering the right side border of the PDF file. > > I would really need help to get it working, as I use Org Mode for > reporting. > > Thank you, > J. Louis -- Professor John Kitchin Doherty Hall A207F Department of Chemical Engineering Carnegie Mellon University Pittsburgh, PA 15213 412-268-7803 @johnkitchin http://kitchingroup.cheme.cmu.edu ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: Failure to display more than 18 images with captions 2016-10-01 14:26 ` John Kitchin @ 2016-10-01 14:56 ` Jean Louis 2016-10-01 17:53 ` Nicolas Goaziou 0 siblings, 1 reply; 11+ messages in thread From: Jean Louis @ 2016-10-01 14:56 UTC (permalink / raw) To: John Kitchin; +Cc: emacs-orgmode, Jean Louis Thank you. It is possible to increase the number of floats in LaTeX, but I could not succeed. I found out that problem is also in compilation of the table of contents, so when I turned toc off, I could see pictures. Further, I am now using non-floats with: #+ATTR_LATEX: :float nil and I can get now the file to work fully as I am expecting, including pictures are on the place where I wanted them to be. It is solved for me, not solved in general as a problem in Org mode. Jean On Sat, Oct 01, 2016 at 10:26:16AM -0400, John Kitchin wrote: > this looks like an issue related to floats. It works with out the > caption because they are not floats in that case. But, with floats, > there are limits. > > see > http://tex.stackexchange.com/questions/46512/too-many-unprocessed-floats. > > According to that page: > > LaTeX can, by default, only cope with 18 outstanding floats; any more, > and you get the error “too many unsuppressed floats”. This package > releases the limit; TeX itself imposes limits (which are interdependent > of the help offered by e-TeX). However, if your floats can’t be placed > anywhere, extending the number of floats merely delays the arrival of > the inevitable error message. > > You may be able to add \clearpage every few figures or use a package > that makes this work. > > Jean Louis writes: > > > Hello, > > > > I have problem with Org Mode, that it fails to display more than 18 > > images correctly, while exporting to PDF (LaTeX export). > > > > I am using images in following manner: > > > > #+CAPTION: Title of image > > #+NAME: fig:pic001 > > [[/some/image001.jpg]] > > > > #+CAPTION: Title of image > > #+NAME: fig:pic002 > > [[/some/image002.jpg]] > > > > #+CAPTION: Title of image > > #+NAME: fig:pic003 > > [[/some/image003.jpg]] > > > > .... and so on until 40-50 images ... > > > > #+CAPTION: Title of image > > #+NAME: fig:pic060 > > [[/some/image060.jpg]] > > > > If I only put links without CAPTION and NAME, the export is working > > well, but images are not nicely formatted. If I am using CAPTION without > > NAME, I get the same problem, so only 18 images are displayed. > > > > I have tried to display random images, to verify is it about the link or > > what would be the cause, but always 18 images are displayed. > > > > Few images are displayed on the side of the PDF, cut, not visible, > > covering the right side border of the PDF file. > > > > I would really need help to get it working, as I use Org Mode for > > reporting. > > > > Thank you, > > J. Louis > > > -- > Professor John Kitchin > Doherty Hall A207F > Department of Chemical Engineering > Carnegie Mellon University > Pittsburgh, PA 15213 > 412-268-7803 > @johnkitchin > http://kitchingroup.cheme.cmu.edu > ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: Failure to display more than 18 images with captions 2016-10-01 14:56 ` Jean Louis @ 2016-10-01 17:53 ` Nicolas Goaziou 2016-10-01 18:04 ` John Kitchin 2016-10-01 18:13 ` Jean Louis 0 siblings, 2 replies; 11+ messages in thread From: Nicolas Goaziou @ 2016-10-01 17:53 UTC (permalink / raw) To: Jean Louis; +Cc: emacs-orgmode, John Kitchin Hello, Jean Louis <guix@rcdrun.com> writes: > It is solved for me, not solved in general as a problem in Org mode. I do not understand: which part is a problem on the Org side? Regards, -- Nicolas Goaziou ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: Failure to display more than 18 images with captions 2016-10-01 17:53 ` Nicolas Goaziou @ 2016-10-01 18:04 ` John Kitchin 2016-10-01 18:13 ` Jean Louis 1 sibling, 0 replies; 11+ messages in thread From: John Kitchin @ 2016-10-01 18:04 UTC (permalink / raw) To: Jean Louis, John Kitchin, emacs-orgmode@gnu.org [-- Attachment #1: Type: text/plain, Size: 609 bytes --] It looks to me like no part. It is a Latex issue. On Saturday, October 1, 2016, Nicolas Goaziou <mail@nicolasgoaziou.fr> wrote: > Hello, > > Jean Louis <guix@rcdrun.com <javascript:;>> writes: > > > It is solved for me, not solved in general as a problem in Org mode. > > I do not understand: which part is a problem on the Org side? > > Regards, > > -- > Nicolas Goaziou > -- John ----------------------------------- Professor John Kitchin Doherty Hall A207F Department of Chemical Engineering Carnegie Mellon University Pittsburgh, PA 15213 412-268-7803 @johnkitchin http://kitchingroup.cheme.cmu.edu [-- Attachment #2: Type: text/html, Size: 1108 bytes --] ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: Failure to display more than 18 images with captions 2016-10-01 17:53 ` Nicolas Goaziou 2016-10-01 18:04 ` John Kitchin @ 2016-10-01 18:13 ` Jean Louis 2016-10-02 4:25 ` William Henney 1 sibling, 1 reply; 11+ messages in thread From: Jean Louis @ 2016-10-01 18:13 UTC (permalink / raw) To: John Kitchin, emacs-orgmode IMHO, the program Org Mode shall not give error when exporting PDF, or it should be documented that certain number of pictures are not tolerated and how to increase that number or how to avoid the problem. Maybe something like explained here: http://tex.stackexchange.com/questions/46512/too-many-unprocessed-floats like "morefloats" package: ctan.org/pkg/morefloats or \extrafloats{100} But I did not get that working, I have simply turned off floats. Jean On Sat, Oct 01, 2016 at 07:53:59PM +0200, Nicolas Goaziou wrote: > Hello, > > Jean Louis <guix@rcdrun.com> writes: > > > It is solved for me, not solved in general as a problem in Org mode. > > I do not understand: which part is a problem on the Org side? > > Regards, > > -- > Nicolas Goaziou ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: Failure to display more than 18 images with captions 2016-10-01 18:13 ` Jean Louis @ 2016-10-02 4:25 ` William Henney 2016-10-02 7:55 ` Nicolas Goaziou 2016-10-03 0:38 ` John Kitchin 0 siblings, 2 replies; 11+ messages in thread From: William Henney @ 2016-10-02 4:25 UTC (permalink / raw) To: Jean Louis; +Cc: emacs-org, John Kitchin [-- Attachment #1: Type: text/plain, Size: 2083 bytes --] I think Jean Louis is right: it _is_ an org issue. The problem is that the default value of org-latex-default-figure-position is "htb", which is a very bad idea. The string always needs to contain a "p" in it somewhere, otherwise latex will never be able to find a solution for figure placement in cases with many floats and little or no text. Fuller explanation: The position specifiers "h" (here), "t" (top), and "b" (bottom) are all for placing floats on a page that has some "normal" text on. For all 3 cases, there is a minimum fraction of the page that must be occupied by text (controlled by the parameter \textfraction, which by default is 0.2). To get pages that are entirely occupied by floats, you need to use the specifier "p" (page). So, by just using "htb" you are giving latex a set of requirements that are impossible to satisfy if there are many floats and no text. Hence the problem with "Too many unprocessed floats". I would recommend that the default be "htbp" instead. Will On Sat, Oct 1, 2016 at 1:13 PM, Jean Louis <guix@rcdrun.com> wrote: > IMHO, the program Org Mode shall not give error when exporting PDF, or > it should be documented that certain number of pictures are not > tolerated and how to increase that number or how to avoid the problem. > > Maybe something like explained here: > http://tex.stackexchange.com/questions/46512/too-many-unprocessed-floats > > like "morefloats" package: > ctan.org/pkg/morefloats > > or \extrafloats{100} > > But I did not get that working, I have simply turned off floats. > > Jean > > On Sat, Oct 01, 2016 at 07:53:59PM +0200, Nicolas Goaziou wrote: > > Hello, > > > > Jean Louis <guix@rcdrun.com> writes: > > > > > It is solved for me, not solved in general as a problem in Org mode. > > > > I do not understand: which part is a problem on the Org side? > > > > Regards, > > > > -- > > Nicolas Goaziou > > -- Dr William Henney, Instituto de Radioastronomía y Astrofísica, Universidad Nacional Autónoma de México, Campus Morelia [-- Attachment #2: Type: text/html, Size: 3129 bytes --] ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: Failure to display more than 18 images with captions 2016-10-02 4:25 ` William Henney @ 2016-10-02 7:55 ` Nicolas Goaziou 2016-10-03 0:38 ` John Kitchin 1 sibling, 0 replies; 11+ messages in thread From: Nicolas Goaziou @ 2016-10-02 7:55 UTC (permalink / raw) To: William Henney; +Cc: emacs-org, Jean Louis, John Kitchin Hello, William Henney <whenney@gmail.com> writes: > I think Jean Louis is right: it _is_ an org issue. The problem is that > the default value of org-latex-default-figure-position is "htb", which is a > very bad idea. The string always needs to contain a "p" in it somewhere, > otherwise latex will never be able to find a solution for figure placement > in cases with many floats and little or no text. > > Fuller explanation: The position specifiers "h" (here), "t" (top), and "b" > (bottom) are all for placing floats on a page that has some "normal" text > on. For all 3 cases, there is a minimum fraction of the page that must be > occupied by text (controlled by the parameter \textfraction, which by > default is 0.2). To get pages that are entirely occupied by floats, you > need to use the specifier "p" (page). So, by just using "htb" you are > giving latex a set of requirements that are impossible to satisfy if there > are many floats and no text. Hence the problem with "Too many unprocessed > floats". I would recommend that the default be "htbp" instead. Fair enough. I changed the default value for the variable. Thank you for the explanation. Regards, -- Nicolas Goaziou ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: Failure to display more than 18 images with captions 2016-10-02 4:25 ` William Henney 2016-10-02 7:55 ` Nicolas Goaziou @ 2016-10-03 0:38 ` John Kitchin 1 sibling, 0 replies; 11+ messages in thread From: John Kitchin @ 2016-10-03 0:38 UTC (permalink / raw) To: William Henney; +Cc: emacs-org, Jean Louis This looks like a user configurable option, e.g. (setq org-latex-default-figure-position "htbp") William Henney writes: > I think Jean Louis is right: it _is_ an org issue. The problem is that > the default value of org-latex-default-figure-position is "htb", which is a > very bad idea. The string always needs to contain a "p" in it somewhere, > otherwise latex will never be able to find a solution for figure placement > in cases with many floats and little or no text. > > Fuller explanation: The position specifiers "h" (here), "t" (top), and "b" > (bottom) are all for placing floats on a page that has some "normal" text > on. For all 3 cases, there is a minimum fraction of the page that must be > occupied by text (controlled by the parameter \textfraction, which by > default is 0.2). To get pages that are entirely occupied by floats, you > need to use the specifier "p" (page). So, by just using "htb" you are > giving latex a set of requirements that are impossible to satisfy if there > are many floats and no text. Hence the problem with "Too many unprocessed > floats". I would recommend that the default be "htbp" instead. > > Will > > > On Sat, Oct 1, 2016 at 1:13 PM, Jean Louis <guix@rcdrun.com> wrote: > >> IMHO, the program Org Mode shall not give error when exporting PDF, or >> it should be documented that certain number of pictures are not >> tolerated and how to increase that number or how to avoid the problem. >> >> Maybe something like explained here: >> http://tex.stackexchange.com/questions/46512/too-many-unprocessed-floats >> >> like "morefloats" package: >> ctan.org/pkg/morefloats >> >> or \extrafloats{100} >> >> But I did not get that working, I have simply turned off floats. >> >> Jean >> >> On Sat, Oct 01, 2016 at 07:53:59PM +0200, Nicolas Goaziou wrote: >> > Hello, >> > >> > Jean Louis <guix@rcdrun.com> writes: >> > >> > > It is solved for me, not solved in general as a problem in Org mode. >> > >> > I do not understand: which part is a problem on the Org side? >> > >> > Regards, >> > >> > -- >> > Nicolas Goaziou >> >> -- Professor John Kitchin Doherty Hall A207F Department of Chemical Engineering Carnegie Mellon University Pittsburgh, PA 15213 412-268-7803 @johnkitchin http://kitchingroup.cheme.cmu.edu ^ permalink raw reply [flat|nested] 11+ messages in thread
end of thread, other threads:[~2016-10-03 0:38 UTC | newest] Thread overview: 11+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2016-10-01 7:19 Failure to display more than 18 images with captions Jean Louis 2016-10-01 10:39 ` Nicolas Goaziou 2016-10-01 10:44 ` Jean Louis 2016-10-01 14:26 ` John Kitchin 2016-10-01 14:56 ` Jean Louis 2016-10-01 17:53 ` Nicolas Goaziou 2016-10-01 18:04 ` John Kitchin 2016-10-01 18:13 ` Jean Louis 2016-10-02 4:25 ` William Henney 2016-10-02 7:55 ` Nicolas Goaziou 2016-10-03 0:38 ` John Kitchin
Code repositories for project(s) associated with this public inbox https://git.savannah.gnu.org/cgit/emacs/org-mode.git This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).