emacs-orgmode@gnu.org archives
 help / color / mirror / code / Atom feed
* bug in latex export?
@ 2013-04-27 10:05 renato
  2013-04-27 11:13 ` Suvayu Ali
  2013-04-28  7:42 ` Nicolas Goaziou
  0 siblings, 2 replies; 9+ messages in thread
From: renato @ 2013-04-27 10:05 UTC (permalink / raw)
  To: emacs-orgmode

[-- Attachment #1: Type: text/plain, Size: 976 bytes --]

Hi, don't know if this has allready been reported, but I just upgraded
to 8.0 and I stumped into this...

this in the .org file

\begin{theoremwithname}[hei]
theorem
\begin{align*}
2+2
\end{align*}
\end{theoremwithname}

gets latex-exported to this (note that after \endtheoremwithname
everything is replicated with escape characters):

\begin{theoremwithname}[hei]
theorem
\begin{align*}
2+2
\end{align*}
\end{theoremwithname}$\backslash$begin\{align*\}
2+2
$\backslash$end\{align*\}
$\backslash$end\{theoremwithname\}
\begin{align*}
2+2
\end{align*}
\end{theoremwithname}


which obviously brings to uncompilable latex code. BTW in the preamble
I have this that defines the environment theoremwithname:

#+LATEX_HEADER: \newtheoremstyle{withname}{}{}{\itshape}{}{\bfseries}{.}{.5em}{\thmname{#3} \thmnumber{#2}} 
#+LATEX_HEADER: \theoremstyle{withname}
#+LATEX_HEADER: \newtheorem{theoremwithname}[equation]{Teorema}


cheers,
renato

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 490 bytes --]

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: bug in latex export?
  2013-04-27 10:05 bug in latex export? renato
@ 2013-04-27 11:13 ` Suvayu Ali
  2013-04-28  7:42 ` Nicolas Goaziou
  1 sibling, 0 replies; 9+ messages in thread
From: Suvayu Ali @ 2013-04-27 11:13 UTC (permalink / raw)
  To: emacs-orgmode

On Sat, Apr 27, 2013 at 12:05:37PM +0200, renato wrote:
> Hi, don't know if this has allready been reported, but I just upgraded
> to 8.0 and I stumped into this...
> 
> this in the .org file
> 
> \begin{theoremwithname}[hei]
> theorem
> \begin{align*}
> 2+2
> \end{align*}
> \end{theoremwithname}

I think only basic macros are supported.  You could just wrap the above
in a #+begin_latex..#+end_latex block.

-- 
Suvayu

Open source is the future. It sets us free.

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: bug in latex export?
  2013-04-27 10:05 bug in latex export? renato
  2013-04-27 11:13 ` Suvayu Ali
@ 2013-04-28  7:42 ` Nicolas Goaziou
  1 sibling, 0 replies; 9+ messages in thread
From: Nicolas Goaziou @ 2013-04-28  7:42 UTC (permalink / raw)
  To: renato; +Cc: emacs-orgmode

Hello,

renato <rennabh@gmail.com> writes:

> this in the .org file
>
> \begin{theoremwithname}[hei]
> theorem
> \begin{align*}
> 2+2
> \end{align*}
> \end{theoremwithname}
>
> gets latex-exported to this (note that after \endtheoremwithname
> everything is replicated with escape characters):

This should be fixed. Thank you for reporting it.


Regards,

-- 
Nicolas Goaziou

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Bug in LaTeX export?
@ 2019-06-13 20:38 Thomas S. Dye
  0 siblings, 0 replies; 9+ messages in thread
From: Thomas S. Dye @ 2019-06-13 20:38 UTC (permalink / raw)
  To: emacs-org list

Aloha all,

I have this in my Org mode file:

#+name: tab:hanamiai-oxcal-files
#+attr_latex: :font \footnotesize :environment longtable :booktabs
#+caption: =OxCal= input files for the Hanamiai models

And this in the exported LaTeX file:

{\footnotesize
\begin{longtable}{lll}
\caption{\label{tab:orgf695a5d}
\texttt{OxCal} input files for the Hanamiai models}
\\

The linebreak at the end of the \caption line introduces a space 
before the caption in the list of tables.  I can get rid of the 
space like this:

{\footnotesize
\begin{longtable}{lll}
\caption{\label{tab:orgf695a5d}%
\texttt{OxCal} input files for the Hanamiai models}
\\

Note the % at the end of the \caption line.

A bug, or something in my setup?

All the best,
Tom
--
Thomas S. Dye
http://tsdye.online/tsdye

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: Bug(?) in LaTeX export?
  2013-01-29 18:42     ` Thomas S. Dye
@ 2013-01-30 12:24       ` Thorsten Jolitz
  0 siblings, 0 replies; 9+ messages in thread
From: Thorsten Jolitz @ 2013-01-30 12:24 UTC (permalink / raw)
  To: emacs-orgmode

tsd@tsdye.com (Thomas S. Dye) writes:

Hi Tom,

> I do have org-export-latex-listings set to nil, and it gives me the
> results I think you're looking for--a no fuss export of some source
> code.  The corresponding variable in the new exporter is
> org-e-latex-listings.  

thats probably what I want - and what I had before.

> Both of these variables are set to nil by default.  Perhaps you are
> setting one of these in .emacs, or there is an old customization?

sometimes I copy large chunks of Emacs configuration from other people,
I'm pretty sure in one of those chunks these variables were set. I have
to check. 

Thanks.

-- 
cheers,
Thorsten

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: Bug(?) in LaTeX export?
  2013-01-29 18:08   ` Thorsten Jolitz
@ 2013-01-29 18:42     ` Thomas S. Dye
  2013-01-30 12:24       ` Thorsten Jolitz
  0 siblings, 1 reply; 9+ messages in thread
From: Thomas S. Dye @ 2013-01-29 18:42 UTC (permalink / raw)
  To: Thorsten Jolitz; +Cc: emacs-orgmode

Hi Thorsten,

Thorsten Jolitz <tjolitz@googlemail.com> writes:

> tsd@tsdye.com (Thomas S. Dye) writes:
>
> Hi Tom,
>
>> What is the value of the variable org-export-latex-listings? 
>
> ,---------------------------------------
> | org-export-latex-listings's value is t
> `---------------------------------------
>
>> If it is 'listings or 'minted, then there is quite a bit of setup
>> required for all the parts to work together correctly (see
>> http://orgmode.org/worg/org-tutorials/org-latex-export.html#sec-12).
>
> Thats quite some stuff to digest, does that hold for both, the new and
> the old exporter? In this case I just wanted a quick LaTeX export with
> the default settings, however ugly or unsatisfactoy, and I remember that
> this used to work. 

I haven't exported fancy listings with the new exporter yet, so I can't
answer your question.  

I do have org-export-latex-listings set to nil, and it gives me the
results I think you're looking for--a no fuss export of some source
code.  The corresponding variable in the new exporter is
org-e-latex-listings.  

Both of these variables are set to nil by default.  Perhaps you are
setting one of these in .emacs, or there is an old customization?

All the best,
Tom

-- 
Thomas S. Dye
http://www.tsdye.com

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: Bug(?) in LaTeX export?
  2013-01-29 17:22 ` Thomas S. Dye
@ 2013-01-29 18:08   ` Thorsten Jolitz
  2013-01-29 18:42     ` Thomas S. Dye
  0 siblings, 1 reply; 9+ messages in thread
From: Thorsten Jolitz @ 2013-01-29 18:08 UTC (permalink / raw)
  To: emacs-orgmode

tsd@tsdye.com (Thomas S. Dye) writes:

Hi Tom,

> What is the value of the variable org-export-latex-listings? 

,---------------------------------------
| org-export-latex-listings's value is t
`---------------------------------------

> If it is 'listings or 'minted, then there is quite a bit of setup
> required for all the parts to work together correctly (see
> http://orgmode.org/worg/org-tutorials/org-latex-export.html#sec-12).

Thats quite some stuff to digest, does that hold for both, the new and
the old exporter? In this case I just wanted a quick LaTeX export with
the default settings, however ugly or unsatisfactoy, and I remember that
this used to work. 

I will have a deeper look, thanks. 

-- 
cheers,
Thorsten

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: Bug(?) in LaTeX export?
  2013-01-29 14:44 Bug(?) " Thorsten Jolitz
@ 2013-01-29 17:22 ` Thomas S. Dye
  2013-01-29 18:08   ` Thorsten Jolitz
  0 siblings, 1 reply; 9+ messages in thread
From: Thomas S. Dye @ 2013-01-29 17:22 UTC (permalink / raw)
  To: Thorsten Jolitz; +Cc: emacs-orgmode

Aloha Thorsten,

Thorsten Jolitz <tjolitz@googlemail.com> writes:

> Hi List, 
>
> when I export an Org file with Source blocks to LaTeX (:exports code),
> the blocks are converted into environments of package 'listings':
>

What is the value of the variable org-export-latex-listings?  If it is
'listings or 'minted, then there is quite a bit of setup required for
all the parts to work together correctly (see
http://orgmode.org/worg/org-tutorials/org-latex-export.html#sec-12). 

All the best,
Tom

-- 
Thomas S. Dye
http://www.tsdye.com

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Bug(?) in LaTeX export?
@ 2013-01-29 14:44 Thorsten Jolitz
  2013-01-29 17:22 ` Thomas S. Dye
  0 siblings, 1 reply; 9+ messages in thread
From: Thorsten Jolitz @ 2013-01-29 14:44 UTC (permalink / raw)
  To: emacs-orgmode


Hi List, 

when I export an Org file with Source blocks to LaTeX (:exports code),
the blocks are converted into environments of package 'listings':

,----------------------
| \lstset{language=...}
| \begin{lstlisting}
| (def  ... )
| \end{lstlisting}
`----------------------

but:

1. the package is not loaded in the preamble (there is no
\usepackage{listings}). 

2. the language name in {language=XXX} is simply copied from
   '#+begin_src XXX' and might not be defined in the listings package. 

Both points cause LaTeX errors. 

-- 
cheers,
Thorsten

^ permalink raw reply	[flat|nested] 9+ messages in thread

end of thread, other threads:[~2019-06-13 20:38 UTC | newest]

Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-04-27 10:05 bug in latex export? renato
2013-04-27 11:13 ` Suvayu Ali
2013-04-28  7:42 ` Nicolas Goaziou
  -- strict thread matches above, loose matches on Subject: below --
2019-06-13 20:38 Bug in LaTeX export? Thomas S. Dye
2013-01-29 14:44 Bug(?) " Thorsten Jolitz
2013-01-29 17:22 ` Thomas S. Dye
2013-01-29 18:08   ` Thorsten Jolitz
2013-01-29 18:42     ` Thomas S. Dye
2013-01-30 12:24       ` Thorsten Jolitz

Code repositories for project(s) associated with this public inbox

	https://git.savannah.gnu.org/cgit/emacs/org-mode.git

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).