* How to use overprint in Beamer export
@ 2013-04-23 2:10 Eric Schulte
2013-04-23 6:26 ` Suvayu Ali
2013-04-23 7:25 ` Nicolas Goaziou
0 siblings, 2 replies; 6+ messages in thread
From: Eric Schulte @ 2013-04-23 2:10 UTC (permalink / raw)
To: Org Mode Mailing List
Hi,
I'd like to enclose a series of blocks which replace each other in the
Beamer overprint environment.
Here's the LateX I'd like to produce.
% latex
\begin{frame}[fragile]{The Things}
\begin{block}{Things}
\begin{description}[<+->]
\item[foo] the first thing I want to talk about
\item[bar] this is the second, follows the first
\item[baz] third and final
\end{description}
\end{block}
\begin{overprint}
\onslide<1>
\begin{block}{Foo}
A picture of a ``foo''.
\end{block}
\onslide<2>
\begin{block}{Bar}
Some text about ``bar''.
\end{block}
\onslide<3>
\begin{block}{Baz}
Content relevant only to ``baz''.
\end{block}
\end{overprint}
\end{frame}
I see no way to generate this from Org-mode given the folding behavior
of Org-mode outlines. Namely the fact that there is no way to *close* a
heading.
Any suggestions appreciated. Thanks,
--
Eric Schulte
http://cs.unm.edu/~eschulte
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: How to use overprint in Beamer export
2013-04-23 2:10 How to use overprint in Beamer export Eric Schulte
@ 2013-04-23 6:26 ` Suvayu Ali
2013-04-23 13:21 ` Eric Schulte
2013-04-23 7:25 ` Nicolas Goaziou
1 sibling, 1 reply; 6+ messages in thread
From: Suvayu Ali @ 2013-04-23 6:26 UTC (permalink / raw)
To: emacs-orgmode
On Mon, Apr 22, 2013 at 08:10:09PM -0600, Eric Schulte wrote:
>
> I'd like to enclose a series of blocks which replace each other in the
> Beamer overprint environment.
[...chomp...chomp...chomp...]
> I see no way to generate this from Org-mode given the folding behavior
> of Org-mode outlines. Namely the fact that there is no way to *close* a
> heading.
Doesn't the following work?
<http://orgmode.org/worg/exporters/beamer/ox-beamer.html#environments-overlay>
--
Suvayu
Open source is the future. It sets us free.
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: How to use overprint in Beamer export
2013-04-23 2:10 How to use overprint in Beamer export Eric Schulte
2013-04-23 6:26 ` Suvayu Ali
@ 2013-04-23 7:25 ` Nicolas Goaziou
2013-04-23 8:12 ` Suvayu Ali
2013-04-23 13:22 ` Eric Schulte
1 sibling, 2 replies; 6+ messages in thread
From: Nicolas Goaziou @ 2013-04-23 7:25 UTC (permalink / raw)
To: Eric Schulte; +Cc: Org Mode Mailing List
Hello,
Eric Schulte <schulte.eric@gmail.com> writes:
> I'd like to enclose a series of blocks which replace each other in the
> Beamer overprint environment.
>
> Here's the LateX I'd like to produce.
>
> % latex
> \begin{frame}[fragile]{The Things}
> \begin{block}{Things}
> \begin{description}[<+->]
> \item[foo] the first thing I want to talk about
> \item[bar] this is the second, follows the first
> \item[baz] third and final
> \end{description}
> \end{block}
>
> \begin{overprint}
> \onslide<1>
> \begin{block}{Foo}
> A picture of a ``foo''.
> \end{block}
>
> \onslide<2>
> \begin{block}{Bar}
> Some text about ``bar''.
> \end{block}
>
> \onslide<3>
> \begin{block}{Baz}
> Content relevant only to ``baz''.
> \end{block}
>
> \end{overprint}
>
> \end{frame}
As pointed out by Suvayu Ali, you can define a new "overprint"
environment, but it won't provide the "\onslide<...>" macros. You'll
have to rely on "#+beamer: \onslide<...>" keywords.
> I see no way to generate this from Org-mode given the folding behavior
> of Org-mode outlines. Namely the fact that there is no way to *close* a
> heading.
In general, you close a headline with another headline (i.e. a block in
Beamer jargon). You can also close a block with an "ignoreheading"
headline. That's how columns work.
Here is an example:
#+begin_src org
#+BIND: org-beamer-environments-extra (("overprint" "O" "\\begin{overprint}%o" "\\end{overprint}"))
#+LANGUAGE: en
#+OPTIONS: H:1 ':t
* The Things
** Things
#+attr_beamer: :overlay +-
- foo :: the first thing I want to talk about
- bar :: this is the second, follows the first
- baz :: third and final
** Overprint
:PROPERTIES:
:beamer_env: overprint
:END:
#+beamer: \onslide<1>
*** Foo
A picture of a "foo".
*** onslide :B_ignoreheading:
:PROPERTIES:
:BEAMER_env: ignoreheading
:END:
#+beamer: \onslide<2>
*** Bar
Some text about "bar".
*** onslide :B_ignoreheading:
:PROPERTIES:
:BEAMER_env: ignoreheading
:END:
#+beamer: \onslide<3>
*** Baz
Content relevant only to "baz".
#+end_src
Regards,
--
Nicolas Goaziou
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: How to use overprint in Beamer export
2013-04-23 7:25 ` Nicolas Goaziou
@ 2013-04-23 8:12 ` Suvayu Ali
2013-04-23 13:22 ` Eric Schulte
1 sibling, 0 replies; 6+ messages in thread
From: Suvayu Ali @ 2013-04-23 8:12 UTC (permalink / raw)
To: emacs-orgmode
On Tue, Apr 23, 2013 at 09:25:33AM +0200, Nicolas Goaziou wrote:
[...chomp...chomp...chomp...]
> In general, you close a headline with another headline (i.e. a block in
> Beamer jargon). You can also close a block with an "ignoreheading"
> headline. That's how columns work.
The "ignoreheading" technique is mentioned under "Special environments"
on that same Worg page.
<http://orgmode.org/worg/exporters/beamer/ox-beamer.html#special-environments>
Maybe I need to restructure the write-up a bit. At the moment it feels
more like documentation rather than tutorial. I'll think a bit how to
best present all the information in a more friendly fashion.
Cheers,
--
Suvayu
Open source is the future. It sets us free.
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: How to use overprint in Beamer export
2013-04-23 7:25 ` Nicolas Goaziou
2013-04-23 8:12 ` Suvayu Ali
@ 2013-04-23 13:22 ` Eric Schulte
1 sibling, 0 replies; 6+ messages in thread
From: Eric Schulte @ 2013-04-23 13:22 UTC (permalink / raw)
To: Nicolas Goaziou; +Cc: Org Mode Mailing List
Nicolas Goaziou <n.goaziou@gmail.com> writes:
> Hello,
>
> Eric Schulte <schulte.eric@gmail.com> writes:
>
>> I'd like to enclose a series of blocks which replace each other in the
>> Beamer overprint environment.
>>
>> Here's the LateX I'd like to produce.
>>
>> % latex
>> \begin{frame}[fragile]{The Things}
>> \begin{block}{Things}
>> \begin{description}[<+->]
>> \item[foo] the first thing I want to talk about
>> \item[bar] this is the second, follows the first
>> \item[baz] third and final
>> \end{description}
>> \end{block}
>>
>> \begin{overprint}
>> \onslide<1>
>> \begin{block}{Foo}
>> A picture of a ``foo''.
>> \end{block}
>>
>> \onslide<2>
>> \begin{block}{Bar}
>> Some text about ``bar''.
>> \end{block}
>>
>> \onslide<3>
>> \begin{block}{Baz}
>> Content relevant only to ``baz''.
>> \end{block}
>>
>> \end{overprint}
>>
>> \end{frame}
>
> As pointed out by Suvayu Ali, you can define a new "overprint"
> environment, but it won't provide the "\onslide<...>" macros. You'll
> have to rely on "#+beamer: \onslide<...>" keywords.
>
>> I see no way to generate this from Org-mode given the folding behavior
>> of Org-mode outlines. Namely the fact that there is no way to *close* a
>> heading.
>
> In general, you close a headline with another headline (i.e. a block in
> Beamer jargon). You can also close a block with an "ignoreheading"
> headline. That's how columns work.
>
> Here is an example:
>
Thanks for this. It does indeed do exactly what I want.
Cheers,
>
> #+begin_src org
> #+BIND: org-beamer-environments-extra (("overprint" "O" "\\begin{overprint}%o" "\\end{overprint}"))
> #+LANGUAGE: en
> #+OPTIONS: H:1 ':t
>
> * The Things
>
> ** Things
>
> #+attr_beamer: :overlay +-
> - foo :: the first thing I want to talk about
> - bar :: this is the second, follows the first
> - baz :: third and final
>
> ** Overprint
> :PROPERTIES:
> :beamer_env: overprint
> :END:
>
> #+beamer: \onslide<1>
> *** Foo
>
> A picture of a "foo".
>
> *** onslide :B_ignoreheading:
> :PROPERTIES:
> :BEAMER_env: ignoreheading
> :END:
>
> #+beamer: \onslide<2>
>
> *** Bar
>
> Some text about "bar".
>
> *** onslide :B_ignoreheading:
> :PROPERTIES:
> :BEAMER_env: ignoreheading
> :END:
>
> #+beamer: \onslide<3>
>
> *** Baz
>
> Content relevant only to "baz".
> #+end_src
>
>
> Regards,
--
Eric Schulte
http://cs.unm.edu/~eschulte
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2013-04-23 15:10 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-04-23 2:10 How to use overprint in Beamer export Eric Schulte
2013-04-23 6:26 ` Suvayu Ali
2013-04-23 13:21 ` Eric Schulte
2013-04-23 7:25 ` Nicolas Goaziou
2013-04-23 8:12 ` Suvayu Ali
2013-04-23 13:22 ` Eric Schulte
Code repositories for project(s) associated with this public inbox
https://git.savannah.gnu.org/cgit/emacs/org-mode.git
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).