From: tsd@tsdye.com (Thomas S. Dye)
To: RCY <recif@yahoo.com>
Cc: Emacs-orgmode@gnu.org
Subject: Re: Booktabs in new LaTeX exporter
Date: Fri, 28 Dec 2012 07:27:57 -1000 [thread overview]
Message-ID: <m1y5gihysi.fsf@tsdye.com> (raw)
In-Reply-To: <CAD_Xbc6tqCpN_J3TsEykDLZKT_JBoYTRAKCbxx+KJ9Gz=PbgDw@mail.gmail.com> (RCY's message of "Fri, 28 Dec 2012 05:50:34 -0500")
Aloha RCY,
Here is a (too long) working example that shows how to pass attributes.
See especially :align, where you've passed a symbol instead of a string.
Note that the new exporter is still in contrib and that at this stage in
its life is documented in the code and in some messages and
announcements that Nicolas Goaziou sent to the mailing list. It is still
necessary to refer to these scattered sources to learn about the new
exporter.
#+caption: ^{14}C age determinations from coastal habitation activities
#+attr_latex: :environment "tabularx" :width "\\textwidth" :booktabs t :align "YlYYcrY" :font "\\footnotesize" :placement "[htb!]"
#+name: tab:dates-coastal-habitation-activities
| *Event* | *Lab* | *Site* | *Material* | *Age* | *Label* | *Reference* |
|---------------------+----------+-------------------+--------------------------------+----------+---------+-------------|
| Habitation activity | \beta-142515 | 50--10--04--22265 | /Chenopodium oahuense/ | 210 \pm 40 | \theta_{57} | [[textcite:dye03:_revis_archaeol_inven_survey_kaihol][;;ref]] |
| Habitation activity | \beta-142517 | 50--10--04--22204 | /Lagenaria siceraria/ | 140 \pm 40 | \theta_58 | [[textcite:dye03:_revis_archaeol_inven_survey_kaihol][;;ref]] |
| Habitation activity | \beta-256583 | PHH-13 | /Aleurites moluccana/ nutshell | 440 \pm 40 | \theta_{59} | [[textcite:field11:_resid_chron_househ_subsis_emerg][612;;ref]] |
| Habitation activity | \beta-243704 | MKI-25 | /Osteomeles anthyllidifolia/ | 240 \pm 40 | \theta_{60} | [[textcite:field11:_resid_chron_househ_subsis_emerg][612;;ref]] |
| Habitation activity | \beta-240446 | MKI-1A | /Aleurites moluccana/ nutshell | 230 \pm 40 | \theta_{61} | [[textcite:field11:_resid_chron_househ_subsis_emerg][612;;ref]] |
| Habitation activity | \beta-240674 | MKI-2C | /Aleurites moluccana/ nutshell | 220 \pm 40 | \theta_{62} | [[textcite:field11:_resid_chron_househ_subsis_emerg][612;;ref]] |
| Habitation activity | \beta-240448 | MKI-56 | /Aleurites moluccana/ nutshell | 190 \pm 40 | \theta_{63} | [[textcite:field11:_resid_chron_househ_subsis_emerg][612;;ref]] |
| Habitation activity | \beta-240447 | MKI-23A | /Aleurites moluccana/ nutshell | 180 \pm 40 | \theta_{64} | [[textcite:field11:_resid_chron_househ_subsis_emerg][612;;ref]] |
| Habitation activity | \beta-240675 | MKI-11A | /Aleurites moluccana/ nutshell | 150 \pm 40 | \theta_65 | [[textcite:field11:_resid_chron_househ_subsis_emerg][612;;ref]] |
| Habitation activity | \beta-276160 | MKI-69 | /Caesalpinia/ cf. /bonduc/ | 90 \pm 40 | \theta_66 | [[textcite:field11:_resid_chron_househ_subsis_emerg][612;;ref]] |
| Habitation activity | \beta-240449 | MKI-56 | /Aleurites moluccana/ nutshell | 40 \pm 40 | \theta_67 | [[textcite:field11:_resid_chron_househ_subsis_emerg][612;;ref]] |
| Habitation activity | \beta-276158 | KAL-46 | /Caesalpina/ cf. /bonduc/ | 160 \pm 40 | \theta_{68} | [[textcite:field11:_resid_chron_househ_subsis_emerg][613;;ref]] |
| Habitation activity | \beta-256576 | MKE-105 | /Chamaesyce/ cf. /multiformis/ | 360 \pm 40 | \theta_{69} | [[textcite:field11:_resid_chron_househ_subsis_emerg][613;;ref]] |
| Habitation activity | \beta-256573 | MKE-104 | /Chamaesyce/ cf. /multiformis/ | 250 \pm 40 | \theta_{70} | [[textcite:field11:_resid_chron_househ_subsis_emerg][614;;ref]] |
hth,
Tom
RCY <recif@yahoo.com> writes:
> Hi,
> Thanks for looking into this. I tried your suggestions but I am still
> having the problem. It seems that some but not all attributes I set are
> recognized. So in the example below it sets sideways table but ignores the
> booktabs and positioning attributes.
>
> #+LATEX_CLASS: article
> #+LATEX_HEADER: \usepackage{booktabs}
> ----org-file-----
> * Test
> #+CAPTION: Test table
> #+attr_latex: :booktabs t :align |r|l| :float sidewaystable
> |----+----|
> | 1 | 2 |
> |----+----|
> | A1 | A2 |
> | B1 | B2 |
> | C1 | C2 |
> |----+----|
>
> -----latex buffer-----
> :
> \begin{sidewaystable}[htb]
> \caption{Test table}
> \begin{center}
> \begin{tabular}{ll}
> \hline
> 1 & 2 \\
> \hline
> A1 & A2 \\
> B1 & B2 \\
> C1 & C2 \\
> \hline
> \end{tabular}
> \end{center}
> \end{sidewaystable}
> -------------------------
>
> On Thu, Dec 27, 2012 at 8:42 PM, Thomas S. Dye <tsd@tsdye.com> wrote:
>
>> Hmm,
>>
>> It works like a charm here.
>>
>> I add booktabs like this:
>>
>> (add-to-list 'org-export-latex-packages-alist '("" "booktabs"))
>>
>> Also, I noticed you have \[PACKAGES]. I don't escape the opening brace:
>>
>> (add-to-list 'org-e-latex-classes
>> '("koma-article"
>> "\\documentclass{scrartcl}
>> [NO-DEFAULT-PACKAGES]
>> [PACKAGES]
>> [EXTRA]
>> \\let\\itemize\\compactitem
>> \\let\\description\\compactdesc
>> \\let\\enumerate\\compactenum
>> \\bibliography{local}
>> \\newcommand{\\rc}{\\textsuperscript{14}C}
>> \\newcolumntype{Y}{>{\\RaggedRight\\arraybackslash}X}"
>> ("\\section{%s}" . "\\section*{%s}")
>> ("\\subsection{%s}" . "\\subsection*{%s}")
>> ("\\subsubsection{%s}" . "\\subsubsection*{%s}")
>> ("\\paragraph{%s}" . "\\paragraph*{%s}")
>> ("\\subparagraph{%s}" . "\\subparagraph*{%s}")))
>>
>> hth,
>> Tom
>>
>> RCY <recif@yahoo.com> writes:
>>
>> > Hi,
>> > I had tried t but then removed it when it did not work and the
>> > documentation seemed to indicate that :booktabs was a toggle.
>> > I tried your suggestion to add (setq org-e-latex-tables-booktabs t) to
>> the
>> > .emacs file but I am still getiing \hline. I did make sure to get the
>> > latest version from git and I am running emacs 24.3.50.1.
>> >
>> > Thanks.
>> >
>> >
>> > On Thu, Dec 27, 2012 at 7:17 PM, Thomas S. Dye <tsd@tsdye.com> wrote:
>> >
>> >> Aloha RCY,
>> >>
>> >> You can have this in your setup to enable booktabs globally:
>> >>
>> >> (setq org-e-latex-tables-booktabs t)
>> >>
>> >> Or, you can give a table this attribute:
>> >>
>> >> #+attr_latex: :booktabs t
>> >>
>> >> I think your example should work if you add the t after :booktabs.
>> >>
>> >> hth,
>> >> Tom
>> >>
>> >> RCY <recif@yahoo.com> writes:
>> >>
>> >> > I am trying to use the booktabs package for tables in the new
>> exporter,
>> >> > however I am unable to get \toprule, etc instead of \hrule
>> >> > I would appreciate any suggestions to fix this.
>> >> >
>> >> > As a minimal example, I started emacs -q, and evaluated the following:
>> >> >
>> >> > (setq org-install-dir "~/.emacs.d/src/org-mode")
>> >> > (add-to-list 'load-path (concat org-install-dir "/contrib/lisp"))
>> >> > (add-to-list 'load-path (concat org-install-dir "/lisp"))
>> >> > (require 'org-e-latex)
>> >> >
>> >> > (add-to-list 'org-e-latex-classes
>> >> > '("article"
>> >> > "\\documentclass[11pt]{article}
>> >> > \[DEFAULT-PACKAGES]
>> >> > \[PACKAGES]
>> >> > \[EXTRA]"
>> >> > ("\\section{%s}" . "\\section*{%s}")
>> >> > ("\\subsection{%s}" . "\\subsection*{%s}")
>> >> > ("\\subsubsection{%s}" . "\\subsubsection*{%s}")))
>> >> >
>> >> > -----org.file-----------
>> >> > #+LATEX_CLASS: article
>> >> > #+LATEX_HEADER: \usepackage{booktabs}
>> >> > * Test
>> >> > #+ATTR_LATEX: :booktabs
>> >> > #+CAPTION: Test table
>> >> > |----+----|
>> >> > | 1 | 2 |
>> >> > |----+----|
>> >> > | A1 | A2 |
>> >> > | B1 | B2 |
>> >> > | C1 | C2 |
>> >> > |----+----|
>> >> >
>> >> > ------latex-buffer from org-export-latex-as-buffer-------
>> >> > % Created 2012-12-27 Thu 18:44
>> >> > \documentclass[11pt]{article}
>> >> > \usepackage[utf8]{inputenc}
>> >> > \usepackage[T1]{fontenc}
>> >> > \usepackage{fixltx2e}
>> >> > \usepackage{graphicx}
>> >> > \usepackage{longtable}
>> >> > \usepackage{float}
>> >> > \usepackage{wrapfig}
>> >> > \usepackage{soul}
>> >> > \usepackage{textcomp}
>> >> > \usepackage{marvosym}
>> >> > \usepackage{wasysym}
>> >> > \usepackage{latexsym}
>> >> > \usepackage{amssymb}
>> >> > \usepackage{hyperref}
>> >> > \tolerance=1000
>> >> > \usepackage{booktabs}
>> >> > \providecommand{\alert}[1]{\textbf{#1}}
>> >> >
>> >> > \title{tst}
>> >> > \author{RC}
>> >> > \date{\today}
>> >> > \hypersetup{
>> >> > pdfkeywords={},
>> >> > pdfsubject={},
>> >> > pdfcreator={Emacs Org-mode version 7.9.2+}}
>> >> >
>> >> > \begin{document}
>> >> >
>> >> > \maketitle
>> >> >
>> >> > \setcounter{tocdepth}{3}
>> >> > \tableofcontents
>> >> > \vspace*{1cm}
>> >> > \section{Test}
>> >> > \label{sec-1}
>> >> >
>> >> > \begin{table}[htb]
>> >> > \caption{Test table}
>> >> > \begin{center}
>> >> > \begin{tabular}{ll}
>> >> > \hline
>> >> > 1 & 2 \\
>> >> > \hline
>> >> > A1 & A2 \\
>> >> > B1 & B2 \\
>> >> > C1 & C2 \\
>> >> > \hline
>> >> > \end{tabular}
>> >> > \end{center}
>> >> > \end{table}
>> >> >
>> >> > \end{document}
>> >> > I am trying to use the booktabs package for tables in the new
>> >> > exporter, however I am unable to get \toprule, etc instead of \hrule
>> >> >
>> >> > I would appreciate any suggestions to fix this.
>> >> >
>> >> > As a minimal example, I started emacs -q, and evaluated the following:
>> >> >
>> >> > (setq org-install-dir "~/.emacs.d/src/org-mode")
>> >> > (add-to-list 'load-path (concat org-install-dir "/contrib/lisp"))
>> >> > (add-to-list 'load-path (concat org-install-dir "/lisp"))
>> >> > (require 'org-e-latex)
>> >> >
>> >> > (add-to-list 'org-e-latex-classes
>> >> > '("article"
>> >> > "\\documentclass[11pt]{article}
>> >> > \[DEFAULT-PACKAGES]
>> >> > \[PACKAGES]
>> >> > \[EXTRA]"
>> >> > ("\\section{%s}" . "\\section*{%s}")
>> >> > ("\\subsection{%s}" . "\\subsection*{%s}")
>> >> > ("\\subsubsection{%s}" . "\\subsubsection*{%s}")))
>> >> >
>> >> > -----org.file-----------
>> >> > #+LATEX_CLASS: article
>> >> > #+LATEX_HEADER: \usepackage{booktabs}
>> >> > * Test
>> >> > #+ATTR_LATEX: :booktabs
>> >> > #+CAPTION: Test table
>> >> > |----+----|
>> >> > | 1 | 2 |
>> >> > |----+----|
>> >> > | A1 | A2 |
>> >> > | B1 | B2 |
>> >> > | C1 | C2 |
>> >> > |----+----|
>> >> >
>> >> > ------latex-buffer from org-export-latex-as-buffer-------
>> >> > % Created 2012-12-27 Thu 18:44
>> >> > \documentclass[11pt]{article}
>> >> > \usepackage[utf8]{inputenc}
>> >> > \usepackage[T1]{fontenc}
>> >> > \usepackage{fixltx2e}
>> >> > \usepackage{graphicx}
>> >> > \usepackage{longtable}
>> >> > \usepackage{float}
>> >> > \usepackage{wrapfig}
>> >> > \usepackage{soul}
>> >> > \usepackage{textcomp}
>> >> > \usepackage{marvosym}
>> >> > \usepackage{wasysym}
>> >> > \usepackage{latexsym}
>> >> > \usepackage{amssymb}
>> >> > \usepackage{hyperref}
>> >> > \tolerance=1000
>> >> > \usepackage{booktabs}
>> >> > \providecommand{\alert}[1]{\textbf{#1}}
>> >> >
>> >> > \title{tst}
>> >> > \author{RC}
>> >> > \date{\today}
>> >> > \hypersetup{
>> >> > pdfkeywords={},
>> >> > pdfsubject={},
>> >> > pdfcreator={Emacs Org-mode version 7.9.2+}}
>> >> >
>> >> > \begin{document}
>> >> >
>> >> > \maketitle
>> >> >
>> >> > \setcounter{tocdepth}{3}
>> >> > \tableofcontents
>> >> > \vspace*{1cm}
>> >> > \section{Test}
>> >> > \label{sec-1}
>> >> >
>> >> > \begin{table}[htb]
>> >> > \caption{Test table}
>> >> > \begin{center}
>> >> > \begin{tabular}{ll}
>> >> > \hline
>> >> > 1 & 2 \\
>> >> > \hline
>> >> > A1 & A2 \\
>> >> > B1 & B2 \\
>> >> > C1 & C2 \\
>> >> > \hline
>> >> > \end{tabular}
>> >> > \end{center}
>> >> > \end{table}
>> >> >
>> >> > \end{document}
>> >> >
>> >>
>> >> --
>> >> Thomas S. Dye
>> >> http://www.tsdye.com
>> >>
>> > Hi,
>> >
>> > I had tried t but then removed it when it did not work and the
>> > documentation seemed to indicate that :booktabs was a toggle.
>> > I tried your suggestion to add (setq org-e-latex-tables-booktabs t)
>> > to the .emacs file but I am still getiing \hline. I did make sure to
>> > get the latest version from git and I am running emacs 24.3.50.1.
>> >
>> > Thanks.
>> >
>> >
>> > On Thu, Dec 27, 2012 at 7:17 PM, Thomas S. Dye <tsd@tsdye.com> wrote:
>> >
>> > Aloha RCY,
>> >
>> > You can have this in your setup to enable booktabs globally:
>> >
>> > (setq org-e-latex-tables-booktabs t)
>> >
>> > Or, you can give a table this attribute:
>> >
>> > #+attr_latex: :booktabs t
>> >
>> > I think your example should work if you add the t after :booktabs.
>> >
>> > hth,
>> > Tom
>> >
>> >
>> >
>> > RCY <recif@yahoo.com> writes:
>> >
>> > > I am trying to use the booktabs package for tables in the new
>> > exporter,
>> > > however I am unable to get \toprule, etc instead of \hrule
>> > > I would appreciate any suggestions to fix this.
>> > >
>> > > As a minimal example, I started emacs -q, and evaluated the
>> > following:
>> > >
>> > > (setq org-install-dir "~/.emacs.d/src/org-mode")
>> > > (add-to-list 'load-path (concat org-install-dir
>> > "/contrib/lisp"))
>> > > (add-to-list 'load-path (concat org-install-dir "/lisp"))
>> > > (require 'org-e-latex)
>> > >
>> > > (add-to-list 'org-e-latex-classes
>> > > '("article"
>> > > "\\documentclass[11pt]{article}
>> > > \[DEFAULT-PACKAGES]
>> > > \[PACKAGES]
>> > > \[EXTRA]"
>> > > ("\\section{%s}" . "\\section*{%s}")
>> > > ("\\subsection{%s}" . "\\subsection*{%s}")
>> > > ("\\subsubsection{%s}" . "\\subsubsection*{%s}")))
>> > >
>> > > -----org.file-----------
>> > > #+LATEX_CLASS: article
>> > > #+LATEX_HEADER: \usepackage{booktabs}
>> > > * Test
>> > > #+ATTR_LATEX: :booktabs
>> > > #+CAPTION: Test table
>> > > |----+----|
>> > > | 1 | 2 |
>> > > |----+----|
>> > > | A1 | A2 |
>> > > | B1 | B2 |
>> > > | C1 | C2 |
>> > > |----+----|
>> > >
>> > > ------latex-buffer from org-export-latex-as-buffer-------
>> > > % Created 2012-12-27 Thu 18:44
>> > > \documentclass[11pt]{article}
>> > > \usepackage[utf8]{inputenc}
>> > > \usepackage[T1]{fontenc}
>> > > \usepackage{fixltx2e}
>> > > \usepackage{graphicx}
>> > > \usepackage{longtable}
>> > > \usepackage{float}
>> > > \usepackage{wrapfig}
>> > > \usepackage{soul}
>> > > \usepackage{textcomp}
>> > > \usepackage{marvosym}
>> > > \usepackage{wasysym}
>> > > \usepackage{latexsym}
>> > > \usepackage{amssymb}
>> > > \usepackage{hyperref}
>> > > \tolerance=1000
>> > > \usepackage{booktabs}
>> > > \providecommand{\alert}[1]{\textbf{#1}}
>> > >
>> > > \title{tst}
>> > > \author{RC}
>> > > \date{\today}
>> > > \hypersetup{
>> > > pdfkeywords={},
>> > > pdfsubject={},
>> > > pdfcreator={Emacs Org-mode version 7.9.2+}}
>> > >
>> > > \begin{document}
>> > >
>> > > \maketitle
>> > >
>> > > \setcounter{tocdepth}{3}
>> > > \tableofcontents
>> > > \vspace*{1cm}
>> > > \section{Test}
>> > > \label{sec-1}
>> > >
>> > > \begin{table}[htb]
>> > > \caption{Test table}
>> > > \begin{center}
>> > > \begin{tabular}{ll}
>> > > \hline
>> > > 1 & 2 \\
>> > > \hline
>> > > A1 & A2 \\
>> > > B1 & B2 \\
>> > > C1 & C2 \\
>> > > \hline
>> > > \end{tabular}
>> > > \end{center}
>> > > \end{table}
>> > >
>> > > \end{document}
>> > > I am trying to use the booktabs package for tables in the new
>> > > exporter, however I am unable to get \toprule, etc instead of
>> > \hrule
>> > >
>> > > I would appreciate any suggestions to fix this.
>> > >
>> > > As a minimal example, I started emacs -q, and evaluated the
>> > following:
>> > >
>> > > (setq org-install-dir "~/.emacs.d/src/org-mode")
>> > > (add-to-list 'load-path (concat org-install-dir
>> > "/contrib/lisp"))
>> > > (add-to-list 'load-path (concat org-install-dir "/lisp"))
>> > > (require 'org-e-latex)
>> > >
>> > > (add-to-list 'org-e-latex-classes
>> > > '("article"
>> > > "\\documentclass[11pt]{article}
>> > > \[DEFAULT-PACKAGES]
>> > > \[PACKAGES]
>> > > \[EXTRA]"
>> > > ("\\section{%s}" . "\\section*{%s}")
>> > > ("\\subsection{%s}" . "\\subsection*{%s}")
>> > > ("\\subsubsection{%s}" . "\\subsubsection*{%s}")))
>> > >
>> > > -----org.file-----------
>> > > #+LATEX_CLASS: article
>> > > #+LATEX_HEADER: \usepackage{booktabs}
>> > > * Test
>> > > #+ATTR_LATEX: :booktabs
>> > > #+CAPTION: Test table
>> > > |----+----|
>> > > | 1 | 2 |
>> > > |----+----|
>> > > | A1 | A2 |
>> > > | B1 | B2 |
>> > > | C1 | C2 |
>> > > |----+----|
>> > >
>> > > ------latex-buffer from org-export-latex-as-buffer-------
>> > > % Created 2012-12-27 Thu 18:44
>> > > \documentclass[11pt]{article}
>> > > \usepackage[utf8]{inputenc}
>> > > \usepackage[T1]{fontenc}
>> > > \usepackage{fixltx2e}
>> > > \usepackage{graphicx}
>> > > \usepackage{longtable}
>> > > \usepackage{float}
>> > > \usepackage{wrapfig}
>> > > \usepackage{soul}
>> > > \usepackage{textcomp}
>> > > \usepackage{marvosym}
>> > > \usepackage{wasysym}
>> > > \usepackage{latexsym}
>> > > \usepackage{amssymb}
>> > > \usepackage{hyperref}
>> > > \tolerance=1000
>> > > \usepackage{booktabs}
>> > > \providecommand{\alert}[1]{\textbf{#1}}
>> > >
>> > > \title{tst}
>> > > \author{RC}
>> > > \date{\today}
>> > > \hypersetup{
>> > > pdfkeywords={},
>> > > pdfsubject={},
>> > > pdfcreator={Emacs Org-mode version 7.9.2+}}
>> > >
>> > > \begin{document}
>> > >
>> > > \maketitle
>> > >
>> > > \setcounter{tocdepth}{3}
>> > > \tableofcontents
>> > > \vspace*{1cm}
>> > > \section{Test}
>> > > \label{sec-1}
>> > >
>> > > \begin{table}[htb]
>> > > \caption{Test table}
>> > > \begin{center}
>> > > \begin{tabular}{ll}
>> > > \hline
>> > > 1 & 2 \\
>> > > \hline
>> > > A1 & A2 \\
>> > > B1 & B2 \\
>> > > C1 & C2 \\
>> > > \hline
>> > > \end{tabular}
>> > > \end{center}
>> > > \end{table}
>> > >
>> > > \end{document}
>> > >
>> >
>> >
>> > --
>> > Thomas S. Dye
>> > http://www.tsdye.com
>> >
>> >
>>
>> --
>> Thomas S. Dye
>> http://www.tsdye.com
>>
> Hi,
>
> Thanks for looking into this. I tried your suggestions but I am still
> having the problem. It seems that some but not all attributes I set
> are recognized. So in the example below it sets sideways table but
> ignores the booktabs and positioning attributes.
>
> #+LATEX_CLASS: article
> #+LATEX_HEADER: \usepackage{booktabs}
> ----org-file-----
> * Test
> #+CAPTION: Test table
> #+attr_latex: :booktabs t :align |r|l| :float sidewaystable
> |----+----|
> | 1 | 2 |
> |----+----|
> | A1 | A2 |
> | B1 | B2 |
> | C1 | C2 |
> |----+----|
>
> -----latex buffer-----
> :
> \begin{sidewaystable}[htb]
> \caption{Test table}
> \begin{center}
> \begin{tabular}{ll}
> \hline
> 1 & 2 \\
> \hline
> A1 & A2 \\
> B1 & B2 \\
> C1 & C2 \\
> \hline
> \end{tabular}
> \end{center}
> \end{sidewaystable}
> -------------------------
>
> On Thu, Dec 27, 2012 at 8:42 PM, Thomas S. Dye <tsd@tsdye.com> wrote:
>
> Hmm,
>
> It works like a charm here.
>
> I add booktabs like this:
>
> (add-to-list 'org-export-latex-packages-alist '("" "booktabs"))
>
> Also, I noticed you have \[PACKAGES]. I don't escape the opening
> brace:
>
> (add-to-list 'org-e-latex-classes
> '("koma-article"
> "\\documentclass{scrartcl}
> [NO-DEFAULT-PACKAGES]
> [PACKAGES]
> [EXTRA]
> \\let\\itemize\\compactitem
> \\let\\description\\compactdesc
> \\let\\enumerate\\compactenum
> \\bibliography{local}
> \\newcommand{\\rc}{\\textsuperscript{14}C}
> \\newcolumntype{Y}{>{\\RaggedRight\\arraybackslash}X}"
>
> ("\\section{%s}" . "\\section*{%s}")
> ("\\subsection{%s}" . "\\subsection*{%s}")
> ("\\subsubsection{%s}" . "\\subsubsection*{%s}")
>
> ("\\paragraph{%s}" . "\\paragraph*{%s}")
> ("\\subparagraph{%s}" . "\\subparagraph*{%s}")))
>
>
>
> hth,
> Tom
>
> RCY <recif@yahoo.com> writes:
>
> > Hi,
> > I had tried t but then removed it when it did not work and the
> > documentation seemed to indicate that :booktabs was a toggle.
> > I tried your suggestion to add (setq
> org-e-latex-tables-booktabs t) to the
> > .emacs file but I am still getiing \hline. I did make sure to
> get the
> > latest version from git and I am running emacs 24.3.50.1.
> >
> > Thanks.
> >
> >
> > On Thu, Dec 27, 2012 at 7:17 PM, Thomas S. Dye <tsd@tsdye.com>
> wrote:
> >
> >> Aloha RCY,
> >>
> >> You can have this in your setup to enable booktabs globally:
> >>
> >> (setq org-e-latex-tables-booktabs t)
> >>
> >> Or, you can give a table this attribute:
> >>
> >> #+attr_latex: :booktabs t
> >>
> >> I think your example should work if you add the t after
> :booktabs.
> >>
> >> hth,
> >> Tom
> >>
> >> RCY <recif@yahoo.com> writes:
> >>
> >> > I am trying to use the booktabs package for tables in the new
> exporter,
> >> > however I am unable to get \toprule, etc instead of \hrule
> >> > I would appreciate any suggestions to fix this.
> >> >
> >> > As a minimal example, I started emacs -q, and evaluated the
> following:
> >> >
> >> > (setq org-install-dir "~/.emacs.d/src/org-mode")
> >> > (add-to-list 'load-path (concat org-install-dir
> "/contrib/lisp"))
> >> > (add-to-list 'load-path (concat org-install-dir "/lisp"))
> >> > (require 'org-e-latex)
> >> >
> >> > (add-to-list 'org-e-latex-classes
> >> > '("article"
> >> > "\\documentclass[11pt]{article}
> >> > \[DEFAULT-PACKAGES]
> >> > \[PACKAGES]
> >> > \[EXTRA]"
> >> > ("\\section{%s}" . "\\section*{%s}")
> >> > ("\\subsection{%s}" . "\\subsection*{%s}")
> >> > ("\\subsubsection{%s}" . "\\subsubsection*{%s}")))
> >> >
> >> > -----org.file-----------
> >> > #+LATEX_CLASS: article
> >> > #+LATEX_HEADER: \usepackage{booktabs}
> >> > * Test
> >> > #+ATTR_LATEX: :booktabs
> >> > #+CAPTION: Test table
> >> > |----+----|
> >> > | 1 | 2 |
> >> > |----+----|
> >> > | A1 | A2 |
> >> > | B1 | B2 |
> >> > | C1 | C2 |
> >> > |----+----|
> >> >
> >> > ------latex-buffer from org-export-latex-as-buffer-------
> >> > % Created 2012-12-27 Thu 18:44
> >> > \documentclass[11pt]{article}
> >> > \usepackage[utf8]{inputenc}
> >> > \usepackage[T1]{fontenc}
> >> > \usepackage{fixltx2e}
> >> > \usepackage{graphicx}
> >> > \usepackage{longtable}
> >> > \usepackage{float}
> >> > \usepackage{wrapfig}
> >> > \usepackage{soul}
> >> > \usepackage{textcomp}
> >> > \usepackage{marvosym}
> >> > \usepackage{wasysym}
> >> > \usepackage{latexsym}
> >> > \usepackage{amssymb}
> >> > \usepackage{hyperref}
> >> > \tolerance=1000
> >> > \usepackage{booktabs}
> >> > \providecommand{\alert}[1]{\textbf{#1}}
> >> >
> >> > \title{tst}
> >> > \author{RC}
> >> > \date{\today}
> >> > \hypersetup{
> >> > pdfkeywords={},
> >> > pdfsubject={},
> >> > pdfcreator={Emacs Org-mode version 7.9.2+}}
> >> >
> >> > \begin{document}
> >> >
> >> > \maketitle
> >> >
> >> > \setcounter{tocdepth}{3}
> >> > \tableofcontents
> >> > \vspace*{1cm}
> >> > \section{Test}
> >> > \label{sec-1}
> >> >
> >> > \begin{table}[htb]
> >> > \caption{Test table}
> >> > \begin{center}
> >> > \begin{tabular}{ll}
> >> > \hline
> >> > 1 & 2 \\
> >> > \hline
> >> > A1 & A2 \\
> >> > B1 & B2 \\
> >> > C1 & C2 \\
> >> > \hline
> >> > \end{tabular}
> >> > \end{center}
> >> > \end{table}
> >> >
> >> > \end{document}
> >> > I am trying to use the booktabs package for tables in the new
> >> > exporter, however I am unable to get \toprule, etc instead of
> \hrule
> >> >
> >> > I would appreciate any suggestions to fix this.
> >> >
> >> > As a minimal example, I started emacs -q, and evaluated the
> following:
> >> >
> >> > (setq org-install-dir "~/.emacs.d/src/org-mode")
> >> > (add-to-list 'load-path (concat org-install-dir
> "/contrib/lisp"))
> >> > (add-to-list 'load-path (concat org-install-dir "/lisp"))
> >> > (require 'org-e-latex)
> >> >
> >> > (add-to-list 'org-e-latex-classes
> >> > '("article"
> >> > "\\documentclass[11pt]{article}
> >> > \[DEFAULT-PACKAGES]
> >> > \[PACKAGES]
> >> > \[EXTRA]"
> >> > ("\\section{%s}" . "\\section*{%s}")
> >> > ("\\subsection{%s}" . "\\subsection*{%s}")
> >> > ("\\subsubsection{%s}" . "\\subsubsection*{%s}")))
> >> >
> >> > -----org.file-----------
> >> > #+LATEX_CLASS: article
> >> > #+LATEX_HEADER: \usepackage{booktabs}
> >> > * Test
> >> > #+ATTR_LATEX: :booktabs
> >> > #+CAPTION: Test table
> >> > |----+----|
> >> > | 1 | 2 |
> >> > |----+----|
> >> > | A1 | A2 |
> >> > | B1 | B2 |
> >> > | C1 | C2 |
> >> > |----+----|
> >> >
> >> > ------latex-buffer from org-export-latex-as-buffer-------
> >> > % Created 2012-12-27 Thu 18:44
> >> > \documentclass[11pt]{article}
> >> > \usepackage[utf8]{inputenc}
> >> > \usepackage[T1]{fontenc}
> >> > \usepackage{fixltx2e}
> >> > \usepackage{graphicx}
> >> > \usepackage{longtable}
> >> > \usepackage{float}
> >> > \usepackage{wrapfig}
> >> > \usepackage{soul}
> >> > \usepackage{textcomp}
> >> > \usepackage{marvosym}
> >> > \usepackage{wasysym}
> >> > \usepackage{latexsym}
> >> > \usepackage{amssymb}
> >> > \usepackage{hyperref}
> >> > \tolerance=1000
> >> > \usepackage{booktabs}
> >> > \providecommand{\alert}[1]{\textbf{#1}}
> >> >
> >> > \title{tst}
> >> > \author{RC}
> >> > \date{\today}
> >> > \hypersetup{
> >> > pdfkeywords={},
> >> > pdfsubject={},
> >> > pdfcreator={Emacs Org-mode version 7.9.2+}}
> >> >
> >> > \begin{document}
> >> >
> >> > \maketitle
> >> >
> >> > \setcounter{tocdepth}{3}
> >> > \tableofcontents
> >> > \vspace*{1cm}
> >> > \section{Test}
> >> > \label{sec-1}
> >> >
> >> > \begin{table}[htb]
> >> > \caption{Test table}
> >> > \begin{center}
> >> > \begin{tabular}{ll}
> >> > \hline
> >> > 1 & 2 \\
> >> > \hline
> >> > A1 & A2 \\
> >> > B1 & B2 \\
> >> > C1 & C2 \\
> >> > \hline
> >> > \end{tabular}
> >> > \end{center}
> >> > \end{table}
> >> >
> >> > \end{document}
> >> >
> >>
> >> --
> >> Thomas S. Dye
> >> http://www.tsdye.com
> >>
> > Hi,
> >
> > I had tried t but then removed it when it did not work and the
> > documentation seemed to indicate that :booktabs was a toggle.
> > I tried your suggestion to add (setq
> org-e-latex-tables-booktabs t)
> > to the .emacs file but I am still getiing \hline. I did make
> sure to
> > get the latest version from git and I am running emacs
> 24.3.50.1.
> >
> > Thanks.
> >
> >
> > On Thu, Dec 27, 2012 at 7:17 PM, Thomas S. Dye <tsd@tsdye.com>
> wrote:
> >
> > Aloha RCY,
> >
> > You can have this in your setup to enable booktabs globally:
> >
> > (setq org-e-latex-tables-booktabs t)
> >
> > Or, you can give a table this attribute:
> >
> > #+attr_latex: :booktabs t
> >
> > I think your example should work if you add the t after
> :booktabs.
> >
> > hth,
> > Tom
> >
> >
> >
> > RCY <recif@yahoo.com> writes:
> >
> > > I am trying to use the booktabs package for tables in the
> new
> > exporter,
> > > however I am unable to get \toprule, etc instead of \hrule
> > > I would appreciate any suggestions to fix this.
> > >
> > > As a minimal example, I started emacs -q, and evaluated
> the
> > following:
> > >
> > > (setq org-install-dir "~/.emacs.d/src/org-mode")
> > > (add-to-list 'load-path (concat org-install-dir
> > "/contrib/lisp"))
> > > (add-to-list 'load-path (concat org-install-dir
> "/lisp"))
> > > (require 'org-e-latex)
> > >
> > > (add-to-list 'org-e-latex-classes
> > > '("article"
> > > "\\documentclass[11pt]{article}
> > > \[DEFAULT-PACKAGES]
> > > \[PACKAGES]
> > > \[EXTRA]"
> > > ("\\section{%s}" . "\\section*{%s}")
> > > ("\\subsection{%s}" . "\\subsection*{%s}")
> > > ("\\subsubsection{%s}" . "\\subsubsection*{%s}")))
> > >
> > > -----org.file-----------
> > > #+LATEX_CLASS: article
> > > #+LATEX_HEADER: \usepackage{booktabs}
> > > * Test
> > > #+ATTR_LATEX: :booktabs
> > > #+CAPTION: Test table
> > > |----+----|
> > > | 1 | 2 |
> > > |----+----|
> > > | A1 | A2 |
> > > | B1 | B2 |
> > > | C1 | C2 |
> > > |----+----|
> > >
> > > ------latex-buffer from org-export-latex-as-buffer-------
> > > % Created 2012-12-27 Thu 18:44
> > > \documentclass[11pt]{article}
> > > \usepackage[utf8]{inputenc}
> > > \usepackage[T1]{fontenc}
> > > \usepackage{fixltx2e}
> > > \usepackage{graphicx}
> > > \usepackage{longtable}
> > > \usepackage{float}
> > > \usepackage{wrapfig}
> > > \usepackage{soul}
> > > \usepackage{textcomp}
> > > \usepackage{marvosym}
> > > \usepackage{wasysym}
> > > \usepackage{latexsym}
> > > \usepackage{amssymb}
> > > \usepackage{hyperref}
> > > \tolerance=1000
> > > \usepackage{booktabs}
> > > \providecommand{\alert}[1]{\textbf{#1}}
> > >
> > > \title{tst}
> > > \author{RC}
> > > \date{\today}
> > > \hypersetup{
> > > pdfkeywords={},
> > > pdfsubject={},
> > > pdfcreator={Emacs Org-mode version 7.9.2+}}
> > >
> > > \begin{document}
> > >
> > > \maketitle
> > >
> > > \setcounter{tocdepth}{3}
> > > \tableofcontents
> > > \vspace*{1cm}
> > > \section{Test}
> > > \label{sec-1}
> > >
> > > \begin{table}[htb]
> > > \caption{Test table}
> > > \begin{center}
> > > \begin{tabular}{ll}
> > > \hline
> > > 1 & 2 \\
> > > \hline
> > > A1 & A2 \\
> > > B1 & B2 \\
> > > C1 & C2 \\
> > > \hline
> > > \end{tabular}
> > > \end{center}
> > > \end{table}
> > >
> > > \end{document}
> > > I am trying to use the booktabs package for tables in the
> new
> > > exporter, however I am unable to get \toprule, etc instead
> of
> > \hrule
> > >
> > > I would appreciate any suggestions to fix this.
> > >
> > > As a minimal example, I started emacs -q, and evaluated
> the
> > following:
> > >
> > > (setq org-install-dir "~/.emacs.d/src/org-mode")
> > > (add-to-list 'load-path (concat org-install-dir
> > "/contrib/lisp"))
> > > (add-to-list 'load-path (concat org-install-dir
> "/lisp"))
> > > (require 'org-e-latex)
> > >
> > > (add-to-list 'org-e-latex-classes
> > > '("article"
> > > "\\documentclass[11pt]{article}
> > > \[DEFAULT-PACKAGES]
> > > \[PACKAGES]
> > > \[EXTRA]"
> > > ("\\section{%s}" . "\\section*{%s}")
> > > ("\\subsection{%s}" . "\\subsection*{%s}")
> > > ("\\subsubsection{%s}" . "\\subsubsection*{%s}")))
> > >
> > > -----org.file-----------
> > > #+LATEX_CLASS: article
> > > #+LATEX_HEADER: \usepackage{booktabs}
> > > * Test
> > > #+ATTR_LATEX: :booktabs
> > > #+CAPTION: Test table
> > > |----+----|
> > > | 1 | 2 |
> > > |----+----|
> > > | A1 | A2 |
> > > | B1 | B2 |
> > > | C1 | C2 |
> > > |----+----|
> > >
> > > ------latex-buffer from org-export-latex-as-buffer-------
> > > % Created 2012-12-27 Thu 18:44
> > > \documentclass[11pt]{article}
> > > \usepackage[utf8]{inputenc}
> > > \usepackage[T1]{fontenc}
> > > \usepackage{fixltx2e}
> > > \usepackage{graphicx}
> > > \usepackage{longtable}
> > > \usepackage{float}
> > > \usepackage{wrapfig}
> > > \usepackage{soul}
> > > \usepackage{textcomp}
> > > \usepackage{marvosym}
> > > \usepackage{wasysym}
> > > \usepackage{latexsym}
> > > \usepackage{amssymb}
> > > \usepackage{hyperref}
> > > \tolerance=1000
> > > \usepackage{booktabs}
> > > \providecommand{\alert}[1]{\textbf{#1}}
> > >
> > > \title{tst}
> > > \author{RC}
> > > \date{\today}
> > > \hypersetup{
> > > pdfkeywords={},
> > > pdfsubject={},
> > > pdfcreator={Emacs Org-mode version 7.9.2+}}
> > >
> > > \begin{document}
> > >
> > > \maketitle
> > >
> > > \setcounter{tocdepth}{3}
> > > \tableofcontents
> > > \vspace*{1cm}
> > > \section{Test}
> > > \label{sec-1}
> > >
> > > \begin{table}[htb]
> > > \caption{Test table}
> > > \begin{center}
> > > \begin{tabular}{ll}
> > > \hline
> > > 1 & 2 \\
> > > \hline
> > > A1 & A2 \\
> > > B1 & B2 \\
> > > C1 & C2 \\
> > > \hline
> > > \end{tabular}
> > > \end{center}
> > > \end{table}
> > >
> > > \end{document}
> > >
> >
> >
> > --
> > Thomas S. Dye
> > http://www.tsdye.com
> >
> >
>
> --
> Thomas S. Dye
> http://www.tsdye.com
>
>
--
Thomas S. Dye
http://www.tsdye.com
next prev parent reply other threads:[~2012-12-28 17:28 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-12-27 23:57 Booktabs in new LaTeX exporter RCY
2012-12-28 0:17 ` Thomas S. Dye
2012-12-28 1:20 ` RCY
2012-12-28 1:42 ` Thomas S. Dye
2012-12-28 10:50 ` RCY
2012-12-28 17:27 ` Thomas S. Dye [this message]
2012-12-28 18:05 ` RCY
2012-12-28 19:06 ` Thomas S. Dye
2012-12-28 23:07 ` RCY
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
List information: https://www.orgmode.org/
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=m1y5gihysi.fsf@tsdye.com \
--to=tsd@tsdye.com \
--cc=Emacs-orgmode@gnu.org \
--cc=recif@yahoo.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
Code repositories for project(s) associated with this public inbox
https://git.savannah.gnu.org/cgit/emacs/org-mode.git
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).