From: tsd@tsdye.com (Thomas S. Dye)
To: RCY <recif@yahoo.com>
Cc: Emacs-orgmode@gnu.org
Subject: Re: Booktabs in new LaTeX exporter
Date: Thu, 27 Dec 2012 14:17:52 -1000 [thread overview]
Message-ID: <m1k3s3jahb.fsf@tsdye.com> (raw)
In-Reply-To: <CAD_Xbc4=APoN4fYD5QmQ4F=cA1weyT_0k0=enwYjH_18oOJrew@mail.gmail.com> (RCY's message of "Thu, 27 Dec 2012 18:57:29 -0500")
Aloha RCY,
You can have this in your setup to enable booktabs globally:
(setq org-e-latex-tables-booktabs t)
Or, you can give a table this attribute:
#+attr_latex: :booktabs t
I think your example should work if you add the t after :booktabs.
hth,
Tom
RCY <recif@yahoo.com> writes:
> I am trying to use the booktabs package for tables in the new exporter,
> however I am unable to get \toprule, etc instead of \hrule
> I would appreciate any suggestions to fix this.
>
> As a minimal example, I started emacs -q, and evaluated the following:
>
> (setq org-install-dir "~/.emacs.d/src/org-mode")
> (add-to-list 'load-path (concat org-install-dir "/contrib/lisp"))
> (add-to-list 'load-path (concat org-install-dir "/lisp"))
> (require 'org-e-latex)
>
> (add-to-list 'org-e-latex-classes
> '("article"
> "\\documentclass[11pt]{article}
> \[DEFAULT-PACKAGES]
> \[PACKAGES]
> \[EXTRA]"
> ("\\section{%s}" . "\\section*{%s}")
> ("\\subsection{%s}" . "\\subsection*{%s}")
> ("\\subsubsection{%s}" . "\\subsubsection*{%s}")))
>
> -----org.file-----------
> #+LATEX_CLASS: article
> #+LATEX_HEADER: \usepackage{booktabs}
> * Test
> #+ATTR_LATEX: :booktabs
> #+CAPTION: Test table
> |----+----|
> | 1 | 2 |
> |----+----|
> | A1 | A2 |
> | B1 | B2 |
> | C1 | C2 |
> |----+----|
>
> ------latex-buffer from org-export-latex-as-buffer-------
> % Created 2012-12-27 Thu 18:44
> \documentclass[11pt]{article}
> \usepackage[utf8]{inputenc}
> \usepackage[T1]{fontenc}
> \usepackage{fixltx2e}
> \usepackage{graphicx}
> \usepackage{longtable}
> \usepackage{float}
> \usepackage{wrapfig}
> \usepackage{soul}
> \usepackage{textcomp}
> \usepackage{marvosym}
> \usepackage{wasysym}
> \usepackage{latexsym}
> \usepackage{amssymb}
> \usepackage{hyperref}
> \tolerance=1000
> \usepackage{booktabs}
> \providecommand{\alert}[1]{\textbf{#1}}
>
> \title{tst}
> \author{RC}
> \date{\today}
> \hypersetup{
> pdfkeywords={},
> pdfsubject={},
> pdfcreator={Emacs Org-mode version 7.9.2+}}
>
> \begin{document}
>
> \maketitle
>
> \setcounter{tocdepth}{3}
> \tableofcontents
> \vspace*{1cm}
> \section{Test}
> \label{sec-1}
>
> \begin{table}[htb]
> \caption{Test table}
> \begin{center}
> \begin{tabular}{ll}
> \hline
> 1 & 2 \\
> \hline
> A1 & A2 \\
> B1 & B2 \\
> C1 & C2 \\
> \hline
> \end{tabular}
> \end{center}
> \end{table}
>
> \end{document}
> I am trying to use the booktabs package for tables in the new
> exporter, however I am unable to get \toprule, etc instead of \hrule
>
> I would appreciate any suggestions to fix this.
>
> As a minimal example, I started emacs -q, and evaluated the following:
>
> (setq org-install-dir "~/.emacs.d/src/org-mode")
> (add-to-list 'load-path (concat org-install-dir "/contrib/lisp"))
> (add-to-list 'load-path (concat org-install-dir "/lisp"))
> (require 'org-e-latex)
>
> (add-to-list 'org-e-latex-classes
> '("article"
> "\\documentclass[11pt]{article}
> \[DEFAULT-PACKAGES]
> \[PACKAGES]
> \[EXTRA]"
> ("\\section{%s}" . "\\section*{%s}")
> ("\\subsection{%s}" . "\\subsection*{%s}")
> ("\\subsubsection{%s}" . "\\subsubsection*{%s}")))
>
> -----org.file-----------
> #+LATEX_CLASS: article
> #+LATEX_HEADER: \usepackage{booktabs}
> * Test
> #+ATTR_LATEX: :booktabs
> #+CAPTION: Test table
> |----+----|
> | 1 | 2 |
> |----+----|
> | A1 | A2 |
> | B1 | B2 |
> | C1 | C2 |
> |----+----|
>
> ------latex-buffer from org-export-latex-as-buffer-------
> % Created 2012-12-27 Thu 18:44
> \documentclass[11pt]{article}
> \usepackage[utf8]{inputenc}
> \usepackage[T1]{fontenc}
> \usepackage{fixltx2e}
> \usepackage{graphicx}
> \usepackage{longtable}
> \usepackage{float}
> \usepackage{wrapfig}
> \usepackage{soul}
> \usepackage{textcomp}
> \usepackage{marvosym}
> \usepackage{wasysym}
> \usepackage{latexsym}
> \usepackage{amssymb}
> \usepackage{hyperref}
> \tolerance=1000
> \usepackage{booktabs}
> \providecommand{\alert}[1]{\textbf{#1}}
>
> \title{tst}
> \author{RC}
> \date{\today}
> \hypersetup{
> pdfkeywords={},
> pdfsubject={},
> pdfcreator={Emacs Org-mode version 7.9.2+}}
>
> \begin{document}
>
> \maketitle
>
> \setcounter{tocdepth}{3}
> \tableofcontents
> \vspace*{1cm}
> \section{Test}
> \label{sec-1}
>
> \begin{table}[htb]
> \caption{Test table}
> \begin{center}
> \begin{tabular}{ll}
> \hline
> 1 & 2 \\
> \hline
> A1 & A2 \\
> B1 & B2 \\
> C1 & C2 \\
> \hline
> \end{tabular}
> \end{center}
> \end{table}
>
> \end{document}
>
--
Thomas S. Dye
http://www.tsdye.com
next prev parent reply other threads:[~2012-12-28 0:18 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-12-27 23:57 Booktabs in new LaTeX exporter RCY
2012-12-28 0:17 ` Thomas S. Dye [this message]
2012-12-28 1:20 ` RCY
2012-12-28 1:42 ` Thomas S. Dye
2012-12-28 10:50 ` RCY
2012-12-28 17:27 ` Thomas S. Dye
2012-12-28 18:05 ` RCY
2012-12-28 19:06 ` Thomas S. Dye
2012-12-28 23:07 ` RCY
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
List information: https://www.orgmode.org/
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=m1k3s3jahb.fsf@tsdye.com \
--to=tsd@tsdye.com \
--cc=Emacs-orgmode@gnu.org \
--cc=recif@yahoo.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
Code repositories for project(s) associated with this public inbox
https://git.savannah.gnu.org/cgit/emacs/org-mode.git
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).