From: tsd@tsdye.com (Thomas S. Dye)
To: RCY <recif@yahoo.com>
Cc: Emacs-orgmode@gnu.org
Subject: Re: Booktabs in new LaTeX exporter
Date: Thu, 27 Dec 2012 15:42:36 -1000 [thread overview]
Message-ID: <m17go3j6k3.fsf@tsdye.com> (raw)
In-Reply-To: <CAD_Xbc7fV7pyJckWb4umw=yeW=5fshPrPWayKE7spXrohb=F3Q@mail.gmail.com> (RCY's message of "Thu, 27 Dec 2012 20:20:36 -0500")
Hmm,
It works like a charm here.
I add booktabs like this:
(add-to-list 'org-export-latex-packages-alist '("" "booktabs"))
Also, I noticed you have \[PACKAGES]. I don't escape the opening brace:
(add-to-list 'org-e-latex-classes
'("koma-article"
"\\documentclass{scrartcl}
[NO-DEFAULT-PACKAGES]
[PACKAGES]
[EXTRA]
\\let\\itemize\\compactitem
\\let\\description\\compactdesc
\\let\\enumerate\\compactenum
\\bibliography{local}
\\newcommand{\\rc}{\\textsuperscript{14}C}
\\newcolumntype{Y}{>{\\RaggedRight\\arraybackslash}X}"
("\\section{%s}" . "\\section*{%s}")
("\\subsection{%s}" . "\\subsection*{%s}")
("\\subsubsection{%s}" . "\\subsubsection*{%s}")
("\\paragraph{%s}" . "\\paragraph*{%s}")
("\\subparagraph{%s}" . "\\subparagraph*{%s}")))
hth,
Tom
RCY <recif@yahoo.com> writes:
> Hi,
> I had tried t but then removed it when it did not work and the
> documentation seemed to indicate that :booktabs was a toggle.
> I tried your suggestion to add (setq org-e-latex-tables-booktabs t) to the
> .emacs file but I am still getiing \hline. I did make sure to get the
> latest version from git and I am running emacs 24.3.50.1.
>
> Thanks.
>
>
> On Thu, Dec 27, 2012 at 7:17 PM, Thomas S. Dye <tsd@tsdye.com> wrote:
>
>> Aloha RCY,
>>
>> You can have this in your setup to enable booktabs globally:
>>
>> (setq org-e-latex-tables-booktabs t)
>>
>> Or, you can give a table this attribute:
>>
>> #+attr_latex: :booktabs t
>>
>> I think your example should work if you add the t after :booktabs.
>>
>> hth,
>> Tom
>>
>> RCY <recif@yahoo.com> writes:
>>
>> > I am trying to use the booktabs package for tables in the new exporter,
>> > however I am unable to get \toprule, etc instead of \hrule
>> > I would appreciate any suggestions to fix this.
>> >
>> > As a minimal example, I started emacs -q, and evaluated the following:
>> >
>> > (setq org-install-dir "~/.emacs.d/src/org-mode")
>> > (add-to-list 'load-path (concat org-install-dir "/contrib/lisp"))
>> > (add-to-list 'load-path (concat org-install-dir "/lisp"))
>> > (require 'org-e-latex)
>> >
>> > (add-to-list 'org-e-latex-classes
>> > '("article"
>> > "\\documentclass[11pt]{article}
>> > \[DEFAULT-PACKAGES]
>> > \[PACKAGES]
>> > \[EXTRA]"
>> > ("\\section{%s}" . "\\section*{%s}")
>> > ("\\subsection{%s}" . "\\subsection*{%s}")
>> > ("\\subsubsection{%s}" . "\\subsubsection*{%s}")))
>> >
>> > -----org.file-----------
>> > #+LATEX_CLASS: article
>> > #+LATEX_HEADER: \usepackage{booktabs}
>> > * Test
>> > #+ATTR_LATEX: :booktabs
>> > #+CAPTION: Test table
>> > |----+----|
>> > | 1 | 2 |
>> > |----+----|
>> > | A1 | A2 |
>> > | B1 | B2 |
>> > | C1 | C2 |
>> > |----+----|
>> >
>> > ------latex-buffer from org-export-latex-as-buffer-------
>> > % Created 2012-12-27 Thu 18:44
>> > \documentclass[11pt]{article}
>> > \usepackage[utf8]{inputenc}
>> > \usepackage[T1]{fontenc}
>> > \usepackage{fixltx2e}
>> > \usepackage{graphicx}
>> > \usepackage{longtable}
>> > \usepackage{float}
>> > \usepackage{wrapfig}
>> > \usepackage{soul}
>> > \usepackage{textcomp}
>> > \usepackage{marvosym}
>> > \usepackage{wasysym}
>> > \usepackage{latexsym}
>> > \usepackage{amssymb}
>> > \usepackage{hyperref}
>> > \tolerance=1000
>> > \usepackage{booktabs}
>> > \providecommand{\alert}[1]{\textbf{#1}}
>> >
>> > \title{tst}
>> > \author{RC}
>> > \date{\today}
>> > \hypersetup{
>> > pdfkeywords={},
>> > pdfsubject={},
>> > pdfcreator={Emacs Org-mode version 7.9.2+}}
>> >
>> > \begin{document}
>> >
>> > \maketitle
>> >
>> > \setcounter{tocdepth}{3}
>> > \tableofcontents
>> > \vspace*{1cm}
>> > \section{Test}
>> > \label{sec-1}
>> >
>> > \begin{table}[htb]
>> > \caption{Test table}
>> > \begin{center}
>> > \begin{tabular}{ll}
>> > \hline
>> > 1 & 2 \\
>> > \hline
>> > A1 & A2 \\
>> > B1 & B2 \\
>> > C1 & C2 \\
>> > \hline
>> > \end{tabular}
>> > \end{center}
>> > \end{table}
>> >
>> > \end{document}
>> > I am trying to use the booktabs package for tables in the new
>> > exporter, however I am unable to get \toprule, etc instead of \hrule
>> >
>> > I would appreciate any suggestions to fix this.
>> >
>> > As a minimal example, I started emacs -q, and evaluated the following:
>> >
>> > (setq org-install-dir "~/.emacs.d/src/org-mode")
>> > (add-to-list 'load-path (concat org-install-dir "/contrib/lisp"))
>> > (add-to-list 'load-path (concat org-install-dir "/lisp"))
>> > (require 'org-e-latex)
>> >
>> > (add-to-list 'org-e-latex-classes
>> > '("article"
>> > "\\documentclass[11pt]{article}
>> > \[DEFAULT-PACKAGES]
>> > \[PACKAGES]
>> > \[EXTRA]"
>> > ("\\section{%s}" . "\\section*{%s}")
>> > ("\\subsection{%s}" . "\\subsection*{%s}")
>> > ("\\subsubsection{%s}" . "\\subsubsection*{%s}")))
>> >
>> > -----org.file-----------
>> > #+LATEX_CLASS: article
>> > #+LATEX_HEADER: \usepackage{booktabs}
>> > * Test
>> > #+ATTR_LATEX: :booktabs
>> > #+CAPTION: Test table
>> > |----+----|
>> > | 1 | 2 |
>> > |----+----|
>> > | A1 | A2 |
>> > | B1 | B2 |
>> > | C1 | C2 |
>> > |----+----|
>> >
>> > ------latex-buffer from org-export-latex-as-buffer-------
>> > % Created 2012-12-27 Thu 18:44
>> > \documentclass[11pt]{article}
>> > \usepackage[utf8]{inputenc}
>> > \usepackage[T1]{fontenc}
>> > \usepackage{fixltx2e}
>> > \usepackage{graphicx}
>> > \usepackage{longtable}
>> > \usepackage{float}
>> > \usepackage{wrapfig}
>> > \usepackage{soul}
>> > \usepackage{textcomp}
>> > \usepackage{marvosym}
>> > \usepackage{wasysym}
>> > \usepackage{latexsym}
>> > \usepackage{amssymb}
>> > \usepackage{hyperref}
>> > \tolerance=1000
>> > \usepackage{booktabs}
>> > \providecommand{\alert}[1]{\textbf{#1}}
>> >
>> > \title{tst}
>> > \author{RC}
>> > \date{\today}
>> > \hypersetup{
>> > pdfkeywords={},
>> > pdfsubject={},
>> > pdfcreator={Emacs Org-mode version 7.9.2+}}
>> >
>> > \begin{document}
>> >
>> > \maketitle
>> >
>> > \setcounter{tocdepth}{3}
>> > \tableofcontents
>> > \vspace*{1cm}
>> > \section{Test}
>> > \label{sec-1}
>> >
>> > \begin{table}[htb]
>> > \caption{Test table}
>> > \begin{center}
>> > \begin{tabular}{ll}
>> > \hline
>> > 1 & 2 \\
>> > \hline
>> > A1 & A2 \\
>> > B1 & B2 \\
>> > C1 & C2 \\
>> > \hline
>> > \end{tabular}
>> > \end{center}
>> > \end{table}
>> >
>> > \end{document}
>> >
>>
>> --
>> Thomas S. Dye
>> http://www.tsdye.com
>>
> Hi,
>
> I had tried t but then removed it when it did not work and the
> documentation seemed to indicate that :booktabs was a toggle.
> I tried your suggestion to add (setq org-e-latex-tables-booktabs t)
> to the .emacs file but I am still getiing \hline. I did make sure to
> get the latest version from git and I am running emacs 24.3.50.1.
>
> Thanks.
>
>
> On Thu, Dec 27, 2012 at 7:17 PM, Thomas S. Dye <tsd@tsdye.com> wrote:
>
> Aloha RCY,
>
> You can have this in your setup to enable booktabs globally:
>
> (setq org-e-latex-tables-booktabs t)
>
> Or, you can give a table this attribute:
>
> #+attr_latex: :booktabs t
>
> I think your example should work if you add the t after :booktabs.
>
> hth,
> Tom
>
>
>
> RCY <recif@yahoo.com> writes:
>
> > I am trying to use the booktabs package for tables in the new
> exporter,
> > however I am unable to get \toprule, etc instead of \hrule
> > I would appreciate any suggestions to fix this.
> >
> > As a minimal example, I started emacs -q, and evaluated the
> following:
> >
> > (setq org-install-dir "~/.emacs.d/src/org-mode")
> > (add-to-list 'load-path (concat org-install-dir
> "/contrib/lisp"))
> > (add-to-list 'load-path (concat org-install-dir "/lisp"))
> > (require 'org-e-latex)
> >
> > (add-to-list 'org-e-latex-classes
> > '("article"
> > "\\documentclass[11pt]{article}
> > \[DEFAULT-PACKAGES]
> > \[PACKAGES]
> > \[EXTRA]"
> > ("\\section{%s}" . "\\section*{%s}")
> > ("\\subsection{%s}" . "\\subsection*{%s}")
> > ("\\subsubsection{%s}" . "\\subsubsection*{%s}")))
> >
> > -----org.file-----------
> > #+LATEX_CLASS: article
> > #+LATEX_HEADER: \usepackage{booktabs}
> > * Test
> > #+ATTR_LATEX: :booktabs
> > #+CAPTION: Test table
> > |----+----|
> > | 1 | 2 |
> > |----+----|
> > | A1 | A2 |
> > | B1 | B2 |
> > | C1 | C2 |
> > |----+----|
> >
> > ------latex-buffer from org-export-latex-as-buffer-------
> > % Created 2012-12-27 Thu 18:44
> > \documentclass[11pt]{article}
> > \usepackage[utf8]{inputenc}
> > \usepackage[T1]{fontenc}
> > \usepackage{fixltx2e}
> > \usepackage{graphicx}
> > \usepackage{longtable}
> > \usepackage{float}
> > \usepackage{wrapfig}
> > \usepackage{soul}
> > \usepackage{textcomp}
> > \usepackage{marvosym}
> > \usepackage{wasysym}
> > \usepackage{latexsym}
> > \usepackage{amssymb}
> > \usepackage{hyperref}
> > \tolerance=1000
> > \usepackage{booktabs}
> > \providecommand{\alert}[1]{\textbf{#1}}
> >
> > \title{tst}
> > \author{RC}
> > \date{\today}
> > \hypersetup{
> > pdfkeywords={},
> > pdfsubject={},
> > pdfcreator={Emacs Org-mode version 7.9.2+}}
> >
> > \begin{document}
> >
> > \maketitle
> >
> > \setcounter{tocdepth}{3}
> > \tableofcontents
> > \vspace*{1cm}
> > \section{Test}
> > \label{sec-1}
> >
> > \begin{table}[htb]
> > \caption{Test table}
> > \begin{center}
> > \begin{tabular}{ll}
> > \hline
> > 1 & 2 \\
> > \hline
> > A1 & A2 \\
> > B1 & B2 \\
> > C1 & C2 \\
> > \hline
> > \end{tabular}
> > \end{center}
> > \end{table}
> >
> > \end{document}
> > I am trying to use the booktabs package for tables in the new
> > exporter, however I am unable to get \toprule, etc instead of
> \hrule
> >
> > I would appreciate any suggestions to fix this.
> >
> > As a minimal example, I started emacs -q, and evaluated the
> following:
> >
> > (setq org-install-dir "~/.emacs.d/src/org-mode")
> > (add-to-list 'load-path (concat org-install-dir
> "/contrib/lisp"))
> > (add-to-list 'load-path (concat org-install-dir "/lisp"))
> > (require 'org-e-latex)
> >
> > (add-to-list 'org-e-latex-classes
> > '("article"
> > "\\documentclass[11pt]{article}
> > \[DEFAULT-PACKAGES]
> > \[PACKAGES]
> > \[EXTRA]"
> > ("\\section{%s}" . "\\section*{%s}")
> > ("\\subsection{%s}" . "\\subsection*{%s}")
> > ("\\subsubsection{%s}" . "\\subsubsection*{%s}")))
> >
> > -----org.file-----------
> > #+LATEX_CLASS: article
> > #+LATEX_HEADER: \usepackage{booktabs}
> > * Test
> > #+ATTR_LATEX: :booktabs
> > #+CAPTION: Test table
> > |----+----|
> > | 1 | 2 |
> > |----+----|
> > | A1 | A2 |
> > | B1 | B2 |
> > | C1 | C2 |
> > |----+----|
> >
> > ------latex-buffer from org-export-latex-as-buffer-------
> > % Created 2012-12-27 Thu 18:44
> > \documentclass[11pt]{article}
> > \usepackage[utf8]{inputenc}
> > \usepackage[T1]{fontenc}
> > \usepackage{fixltx2e}
> > \usepackage{graphicx}
> > \usepackage{longtable}
> > \usepackage{float}
> > \usepackage{wrapfig}
> > \usepackage{soul}
> > \usepackage{textcomp}
> > \usepackage{marvosym}
> > \usepackage{wasysym}
> > \usepackage{latexsym}
> > \usepackage{amssymb}
> > \usepackage{hyperref}
> > \tolerance=1000
> > \usepackage{booktabs}
> > \providecommand{\alert}[1]{\textbf{#1}}
> >
> > \title{tst}
> > \author{RC}
> > \date{\today}
> > \hypersetup{
> > pdfkeywords={},
> > pdfsubject={},
> > pdfcreator={Emacs Org-mode version 7.9.2+}}
> >
> > \begin{document}
> >
> > \maketitle
> >
> > \setcounter{tocdepth}{3}
> > \tableofcontents
> > \vspace*{1cm}
> > \section{Test}
> > \label{sec-1}
> >
> > \begin{table}[htb]
> > \caption{Test table}
> > \begin{center}
> > \begin{tabular}{ll}
> > \hline
> > 1 & 2 \\
> > \hline
> > A1 & A2 \\
> > B1 & B2 \\
> > C1 & C2 \\
> > \hline
> > \end{tabular}
> > \end{center}
> > \end{table}
> >
> > \end{document}
> >
>
>
> --
> Thomas S. Dye
> http://www.tsdye.com
>
>
--
Thomas S. Dye
http://www.tsdye.com
next prev parent reply other threads:[~2012-12-28 1:43 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-12-27 23:57 Booktabs in new LaTeX exporter RCY
2012-12-28 0:17 ` Thomas S. Dye
2012-12-28 1:20 ` RCY
2012-12-28 1:42 ` Thomas S. Dye [this message]
2012-12-28 10:50 ` RCY
2012-12-28 17:27 ` Thomas S. Dye
2012-12-28 18:05 ` RCY
2012-12-28 19:06 ` Thomas S. Dye
2012-12-28 23:07 ` RCY
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
List information: https://www.orgmode.org/
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=m17go3j6k3.fsf@tsdye.com \
--to=tsd@tsdye.com \
--cc=Emacs-orgmode@gnu.org \
--cc=recif@yahoo.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
Code repositories for project(s) associated with this public inbox
https://git.savannah.gnu.org/cgit/emacs/org-mode.git
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).