* Prefixing a function call with C-digit @ 2009-09-08 18:14 Raffi R 2009-09-09 0:42 ` Haroldo Stenger 2009-09-09 12:39 ` Prefixing a function call with C-digit Carsten Dominik 0 siblings, 2 replies; 14+ messages in thread From: Raffi R @ 2009-09-08 18:14 UTC (permalink / raw) To: emacs-orgmode Dear org users, I'd like to write some advice or a wrapper function for org-export such that it defaults to a heading level of 0. In org-mode normally, I can get this behaviour by pressing C-0 C-x C-e. Looking at org.el suggested that I should be able to simply provide the 0 as an argument, i.e. using (org-export 0). However, org-export seems to ignore that 0. Thank you very much, - Raffi. ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: Prefixing a function call with C-digit 2009-09-08 18:14 Prefixing a function call with C-digit Raffi R @ 2009-09-09 0:42 ` Haroldo Stenger 2009-09-09 0:44 ` Raffi R 2009-09-09 11:59 ` GTD and adding next actions under projects with remember Desmond Rivet 2009-09-09 12:39 ` Prefixing a function call with C-digit Carsten Dominik 1 sibling, 2 replies; 14+ messages in thread From: Haroldo Stenger @ 2009-09-09 0:42 UTC (permalink / raw) To: Raffi R; +Cc: emacs-orgmode [-- Attachment #1.1: Type: text/plain, Size: 801 bytes --] Raffi, Off the top of mi mind, you pass arguments to commands by issueing C-u <parameter> <command keychord> best, haroldo 2009/9/8 Raffi R <raffir@gmail.com> > Dear org users, > > I'd like to write some advice or a wrapper function for org-export > such that it defaults to a heading level of 0. > > In org-mode normally, I can get this behaviour by pressing C-0 C-x > C-e. Looking at org.el suggested that I should be able to simply > provide the 0 as an argument, i.e. using (org-export 0). However, > org-export seems to ignore that 0. > > Thank you very much, > - Raffi. > > > _______________________________________________ > Emacs-orgmode mailing list > Remember: use `Reply All' to send replies to the list. > Emacs-orgmode@gnu.org > http://lists.gnu.org/mailman/listinfo/emacs-orgmode > [-- Attachment #1.2: Type: text/html, Size: 1277 bytes --] [-- Attachment #2: Type: text/plain, Size: 204 bytes --] _______________________________________________ Emacs-orgmode mailing list Remember: use `Reply All' to send replies to the list. Emacs-orgmode@gnu.org http://lists.gnu.org/mailman/listinfo/emacs-orgmode ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: Prefixing a function call with C-digit 2009-09-09 0:42 ` Haroldo Stenger @ 2009-09-09 0:44 ` Raffi R 2009-09-09 11:59 ` GTD and adding next actions under projects with remember Desmond Rivet 1 sibling, 0 replies; 14+ messages in thread From: Raffi R @ 2009-09-09 0:44 UTC (permalink / raw) To: Haroldo Stenger; +Cc: emacs-orgmode Ordinarily that is the case, but for org-export the convention seems to be C-digit, which passes the digit as an argument to the next function called (in this case, org-export). On Tue, Sep 8, 2009 at 8:42 PM, Haroldo Stenger<harold.stenger@gmail.com> wrote: > Raffi, > > Off the top of mi mind, you pass arguments to commands by issueing C-u > <parameter> <command keychord> > > best, > haroldo > > 2009/9/8 Raffi R <raffir@gmail.com> >> >> Dear org users, >> >> I'd like to write some advice or a wrapper function for org-export >> such that it defaults to a heading level of 0. >> >> In org-mode normally, I can get this behaviour by pressing C-0 C-x >> C-e. Looking at org.el suggested that I should be able to simply >> provide the 0 as an argument, i.e. using (org-export 0). However, >> org-export seems to ignore that 0. >> >> Thank you very much, >> - Raffi. >> >> >> _______________________________________________ >> Emacs-orgmode mailing list >> Remember: use `Reply All' to send replies to the list. >> Emacs-orgmode@gnu.org >> http://lists.gnu.org/mailman/listinfo/emacs-orgmode > > ^ permalink raw reply [flat|nested] 14+ messages in thread
* GTD and adding next actions under projects with remember 2009-09-09 0:42 ` Haroldo Stenger 2009-09-09 0:44 ` Raffi R @ 2009-09-09 11:59 ` Desmond Rivet 2009-09-09 12:25 ` Paul Mead ` (2 more replies) 1 sibling, 3 replies; 14+ messages in thread From: Desmond Rivet @ 2009-09-09 11:59 UTC (permalink / raw) To: emacs-orgmode Hi all, I'm using org-mode to implement GTD (or, at least, making a valiant effort :) I'm currently doing the following: * projects are TODO items under a "Project" heading with a) a project tag and b) a CATEGORY property summarizing the project with a short label. * "waiting" items are TODO items with a waiting tag under a "Waiting" heading. * next actions are TODO items without a project or waiting tag. * contexts are tags attached to the next action and start with "@" * if a next action is under a project heading, then it belongs to that project. I have a special heading called, for lack of a better name, "Misc" under which I put all my next actions which are not associated with any project. This all seems to work ok so far, except for one thing: I can't figure out how to add next actions under a particular project heading using remember. The problem is that I have to specify a heading for the template in org-remember-templates in the .emacs file. This is okay when I want to jot down a new project, waiting item or *generic* next action, because all these items have fixed headings, but I don't know how to make this work when I don't know the heading ahead of time (remember that next actions associated with projects live under the project heading). Any ideas? Thanks in advance for any help. -- Desmond Rivet Pain is weakness leaving the body. ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: GTD and adding next actions under projects with remember 2009-09-09 11:59 ` GTD and adding next actions under projects with remember Desmond Rivet @ 2009-09-09 12:25 ` Paul Mead 2009-09-09 15:30 ` Friedrich Delgado Friedrichs 2009-09-09 23:20 ` Matt Lundin 2 siblings, 0 replies; 14+ messages in thread From: Paul Mead @ 2009-09-09 12:25 UTC (permalink / raw) To: emacs-orgmode Desmond Rivet <desmond_news@videotron.ca> writes: > This all seems to work ok so far, except for one thing: I can't figure > out how to add next actions under a particular project heading using > remember. > > The problem is that I have to specify a heading for the template in > org-remember-templates in the .emacs file. This is okay when I want to > jot down a new project, waiting item or *generic* next action, because > all these items have fixed headings, but I don't know how to make this > work when I don't know the heading ahead of time (remember that next > actions associated with projects live under the project heading). > > Any ideas? Thanks in advance for any help. I do something similar, but use C-1 C-c C-c which allows you to select the refile heading. Have you tried that? Paul ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: GTD and adding next actions under projects with remember 2009-09-09 11:59 ` GTD and adding next actions under projects with remember Desmond Rivet 2009-09-09 12:25 ` Paul Mead @ 2009-09-09 15:30 ` Friedrich Delgado Friedrichs 2009-09-10 0:23 ` Desmond Rivet 2009-09-09 23:20 ` Matt Lundin 2 siblings, 1 reply; 14+ messages in thread From: Friedrich Delgado Friedrichs @ 2009-09-09 15:30 UTC (permalink / raw) To: Desmond Rivet; +Cc: emacs-orgmode Hi! Let me give a bit of feedback on the aspect of "I'm implementing GTD". I do it a bit differently: * Projects are trees (or sub-trees) which have a :Project: Tag attached to them. They never have a TODO keyword of any kind. * Waiting-For items are tracked with a :WAITING: Tag. They never have a TODO keyword of any kind. * Only next actions get a todo keyword of TODO (or maybe DOING if they are work in progress) * Every tag is a potential context for me. The nice thing is that org let's me combine them, e.g. :Bob:Phone: * I use org's priority cookies exclusively as importance, ranging from A - C. That way I can see a list of next actions immediately by typing C-a a t, ordered by importance. With your system I fail to see how you can get quick access to your next action list. I also get a project list by typing C-a a p (tag match, with tag-inheritance turned off), also ordered by priority. Even though I keep todos, projects and reference material in one file together, org-mode allows me to quickly filter by TODO (== Next Action List) :Project: (== Project List) and any other Tag (== Context). I also use active timestamps to designate tickler dates and :SCHEDULE: and :DEADLINE: cookies for the "hard landscape" of the day. Desmond Rivet schrieb: > The problem is that I have to specify a heading for the template in > org-remember-templates in the .emacs file. This is okay when I want to > jot down a new project, waiting item or *generic* next action, because > all these items have fixed headings, but I don't know how to make this > work when I don't know the heading ahead of time (remember that next > actions associated with projects live under the project heading). ---Zitatende--- Sorry for not helping with your particular problem (It looks like you might want to use C-1 C-c C-c or something like that), but: It sounds like you're mixing up collecting and processing. You only need to fill out the full context in the processing phase. At least I use the remember interface for quickly jotting down a note, then get back to work. The stuff I "remember" just goes into a Collect.org file, which I later process as an inbox. -- Friedrich Delgado Friedrichs <friedel@nomaden.org> TauPan on Ircnet and Freenode ;) ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: GTD and adding next actions under projects with remember 2009-09-09 15:30 ` Friedrich Delgado Friedrichs @ 2009-09-10 0:23 ` Desmond Rivet 0 siblings, 0 replies; 14+ messages in thread From: Desmond Rivet @ 2009-09-10 0:23 UTC (permalink / raw) To: emacs-orgmode Friedrich Delgado Friedrichs <friedel@nomaden.org> writes: > That way I can see a list of next actions immediately by typing C-a a > t, ordered by importance. With your system I fail to see how you can > get quick access to your next action list. I have several custom agenda views defined: (setq org-agenda-custom-commands '(("w" tags-todo "+waiting") ("p" "Project View" tags-todo "+project" ((org-agenda-remove-tags t))) ("n" tags-todo "-waiting-project") )) Next actions are defined as those TODO items that don't have a project or a waiting tag. In other words, every TODO item that isn't a project or waiting item is a Next Action. So, my wait list can be pull up by a C-c a w, my project list can be pulled up by a C-c a p, and my next action list can be pulled up with a C-c a n. I have tag inheritence turned off for the "project" tag: (setq org-tags-exclude-from-inheritance '("project")) So that way I don't get a project's next actions when I just want to see the project list on its own. I like the idea of using TODO's as project items because that allows be to track "active" projects - active projects arethose which are in the TODO state. For example, I just completed a project called "Maine vacation". It's done, and I don't want it to show up in my project list anymore. But at the same time, I'd like to keep a record of it. Same thing with the WAIT items. TODO means "waiting" and DONE means "I'm finished waiting". > Desmond Rivet schrieb: >> The problem is that I have to specify a heading for the template in >> org-remember-templates in the .emacs file. This is okay when I want to >> jot down a new project, waiting item or *generic* next action, because >> all these items have fixed headings, but I don't know how to make this >> work when I don't know the heading ahead of time (remember that next >> actions associated with projects live under the project heading). > ---Zitatende--- > > Sorry for not helping with your particular problem (It looks like you > might want to use C-1 C-c C-c or something like that), but: > > It sounds like you're mixing up collecting and processing. You only > need to fill out the full context in the processing phase. At least I > use the remember interface for quickly jotting down a note, then get > back to work. The stuff I "remember" just goes into a Collect.org > file, which I later process as an inbox. That's an interesting idea. My uderstanding was that my "collection" basket would be managed outside of org-mode, via physical lists on notepads. Processing that list would result in my next actions items. Using remember to put stuff in a separate digital collection basket seems like a reasonable idea. Still, I like the idea of quickly being able to add a Next Action item to a particular project, via a keystroke or two... -- Desmond Rivet Pain is weakness leaving the body. ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: GTD and adding next actions under projects with remember 2009-09-09 11:59 ` GTD and adding next actions under projects with remember Desmond Rivet 2009-09-09 12:25 ` Paul Mead 2009-09-09 15:30 ` Friedrich Delgado Friedrichs @ 2009-09-09 23:20 ` Matt Lundin 2 siblings, 0 replies; 14+ messages in thread From: Matt Lundin @ 2009-09-09 23:20 UTC (permalink / raw) To: Desmond Rivet; +Cc: emacs-orgmode Desmond Rivet <desmond_news@videotron.ca> writes: > I'm using org-mode to implement GTD (or, at least, making a valiant > effort :) I'm currently doing the following: > > * projects are TODO items under a "Project" heading with a) a project > tag and b) a CATEGORY property summarizing the project with a short > label. > > * "waiting" items are TODO items with a waiting tag under a "Waiting" > heading. > > * next actions are TODO items without a project or waiting tag. > > * contexts are tags attached to the next action and start with "@" > > * if a next action is under a project heading, then it belongs to that > project. I have a special heading called, for lack of a better name, > "Misc" under which I put all my next actions which are not associated > with any project. > > This all seems to work ok so far, except for one thing: I can't figure > out how to add next actions under a particular project heading using > remember. You can either: 1. Use "C-1 C-c C-c" to file the item interactively. or 2. Set org-remember-store-without-prompt to nil. Best, Matt ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: Prefixing a function call with C-digit 2009-09-08 18:14 Prefixing a function call with C-digit Raffi R 2009-09-09 0:42 ` Haroldo Stenger @ 2009-09-09 12:39 ` Carsten Dominik 2009-09-09 14:23 ` Peter Westlake 1 sibling, 1 reply; 14+ messages in thread From: Carsten Dominik @ 2009-09-09 12:39 UTC (permalink / raw) To: Raffi R; +Cc: emacs-orgmode On Sep 8, 2009, at 8:14 PM, Raffi R wrote: > Dear org users, > > I'd like to write some advice or a wrapper function for org-export > such that it defaults to a heading level of 0. Why don't you just set the variable org-export-headline-levels ? > > In org-mode normally, I can get this behaviour by pressing C-0 C-x > C-e. Looking at org.el suggested that I should be able to simply > provide the 0 as an argument, i.e. using (org-export 0). However, > org-export seems to ignore that 0. (let ((current-prefix-arg 0)) (call-interactively 'org-export)) HTH - Carsten > > Thank you very much, > - Raffi. > > > _______________________________________________ > Emacs-orgmode mailing list > Remember: use `Reply All' to send replies to the list. > Emacs-orgmode@gnu.org > http://lists.gnu.org/mailman/listinfo/emacs-orgmode ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: Prefixing a function call with C-digit 2009-09-09 12:39 ` Prefixing a function call with C-digit Carsten Dominik @ 2009-09-09 14:23 ` Peter Westlake 2009-09-09 14:33 ` Raffi R 2009-09-11 11:41 ` Feature request: org-agenda-store-link Peter Westlake 0 siblings, 2 replies; 14+ messages in thread From: Peter Westlake @ 2009-09-09 14:23 UTC (permalink / raw) To: emacs-orgmode On Wed, 09 Sep 2009 14:39 +0200, "Carsten Dominik" <carsten.dominik@gmail.com> wrote: > > On Sep 8, 2009, at 8:14 PM, Raffi R wrote: ... > > In org-mode normally, I can get this behaviour by pressing C-0 C-x > > C-e. Looking at org.el suggested that I should be able to simply > > provide the 0 as an argument, i.e. using (org-export 0). However, > > org-export seems to ignore that 0. > > (let ((current-prefix-arg 0)) > (call-interactively 'org-export)) This also happens to be the reason a function I was trying to write didn't work! I would never have worked it out for myself - does anyone have time to explain why the original form doesn't work? Here, incidentally, is the function I was writing. It works now! It is intended to be bound to C-c l in the agenda buffer, and was written by imitating org-agenda-refile: (defun org-agenda-store-link (arg) "Store a link to the item at point." (interactive "P") (let* ((marker (or (get-text-property (point) 'org-hd-marker) (org-agenda-error))) (buffer (marker-buffer marker)) (org-link-to-org-use-id t)) (with-current-buffer buffer (save-excursion (save-restriction (widen) (goto-char marker) (let ((current-prefix-arg 0)) (call-interactively 'org-store-link))))))) Is this the right way to do it? Peter. ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: Prefixing a function call with C-digit 2009-09-09 14:23 ` Peter Westlake @ 2009-09-09 14:33 ` Raffi R 2009-09-11 11:41 ` Feature request: org-agenda-store-link Peter Westlake 1 sibling, 0 replies; 14+ messages in thread From: Raffi R @ 2009-09-09 14:33 UTC (permalink / raw) To: Peter Westlake; +Cc: emacs-orgmode Thank you very much! On Wed, Sep 9, 2009 at 10:23 AM, Peter Westlake<peter.westlake@pobox.com> wrote: > On Wed, 09 Sep 2009 14:39 +0200, "Carsten Dominik" > <carsten.dominik@gmail.com> wrote: >> >> On Sep 8, 2009, at 8:14 PM, Raffi R wrote: > ... >> > In org-mode normally, I can get this behaviour by pressing C-0 C-x >> > C-e. Looking at org.el suggested that I should be able to simply >> > provide the 0 as an argument, i.e. using (org-export 0). However, >> > org-export seems to ignore that 0. >> >> (let ((current-prefix-arg 0)) >> (call-interactively 'org-export)) > > This also happens to be the reason a function I was trying to write > didn't work! I would never have worked it out for myself - does > anyone have time to explain why the original form doesn't work? > > Here, incidentally, is the function I was writing. It works now! > It is intended to be bound to C-c l in the agenda buffer, and > was written by imitating org-agenda-refile: > > (defun org-agenda-store-link (arg) > "Store a link to the item at point." > (interactive "P") > (let* ((marker (or (get-text-property (point) 'org-hd-marker) > (org-agenda-error))) > (buffer (marker-buffer marker)) > (org-link-to-org-use-id t)) > (with-current-buffer buffer > (save-excursion > (save-restriction > (widen) > (goto-char marker) > (let ((current-prefix-arg 0)) > (call-interactively 'org-store-link))))))) > > Is this the right way to do it? > > Peter. > > > _______________________________________________ > Emacs-orgmode mailing list > Remember: use `Reply All' to send replies to the list. > Emacs-orgmode@gnu.org > http://lists.gnu.org/mailman/listinfo/emacs-orgmode > ^ permalink raw reply [flat|nested] 14+ messages in thread
* Feature request: org-agenda-store-link 2009-09-09 14:23 ` Peter Westlake 2009-09-09 14:33 ` Raffi R @ 2009-09-11 11:41 ` Peter Westlake 2009-09-12 5:06 ` Carsten Dominik 1 sibling, 1 reply; 14+ messages in thread From: Peter Westlake @ 2009-09-11 11:41 UTC (permalink / raw) To: emacs-orgmode Carsten, Could I request this as a small feature enhancement, please? Commands like org-refile have an agenda equivalent so that the same keys work in the agenda, and it would be very nice to be able to store a link to an item that way as well. Regards, Peter. On Wed, 09 Sep 2009 15:23 +0100, "Peter Westlake" <peter.westlake@pobox.com> wrote: > On Wed, 09 Sep 2009 14:39 +0200, "Carsten Dominik" > <carsten.dominik@gmail.com> wrote: > > > > On Sep 8, 2009, at 8:14 PM, Raffi R wrote: > ... > > > In org-mode normally, I can get this behaviour by pressing C-0 C-x > > > C-e. Looking at org.el suggested that I should be able to simply > > > provide the 0 as an argument, i.e. using (org-export 0). However, > > > org-export seems to ignore that 0. > > > > (let ((current-prefix-arg 0)) > > (call-interactively 'org-export)) > > This also happens to be the reason a function I was trying to write > didn't work! I would never have worked it out for myself - does > anyone have time to explain why the original form doesn't work? > > Here, incidentally, is the function I was writing. It works now! > It is intended to be bound to C-c l in the agenda buffer, and > was written by imitating org-agenda-refile: > > (defun org-agenda-store-link (arg) > "Store a link to the item at point." > (interactive "P") > (let* ((marker (or (get-text-property (point) 'org-hd-marker) > (org-agenda-error))) > (buffer (marker-buffer marker)) > (org-link-to-org-use-id t)) > (with-current-buffer buffer > (save-excursion > (save-restriction > (widen) > (goto-char marker) > (let ((current-prefix-arg 0)) > (call-interactively 'org-store-link))))))) > > Is this the right way to do it? > > Peter. > > > _______________________________________________ > Emacs-orgmode mailing list > Remember: use `Reply All' to send replies to the list. > Emacs-orgmode@gnu.org > http://lists.gnu.org/mailman/listinfo/emacs-orgmode ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: Feature request: org-agenda-store-link 2009-09-11 11:41 ` Feature request: org-agenda-store-link Peter Westlake @ 2009-09-12 5:06 ` Carsten Dominik 2009-09-12 9:42 ` Peter Westlake 0 siblings, 1 reply; 14+ messages in thread From: Carsten Dominik @ 2009-09-12 5:06 UTC (permalink / raw) To: Peter Westlake; +Cc: emacs-orgmode Hi Peter, that does make a lot of sense, why did we not think of this earlier? Works now. Thanks! - Carsten On Sep 11, 2009, at 1:41 PM, Peter Westlake wrote: > Carsten, > > Could I request this as a small feature enhancement, please? > Commands like org-refile have an agenda equivalent so that > the same keys work in the agenda, and it would be very nice > to be able to store a link to an item that way as well. > > Regards, > > Peter. > > On Wed, 09 Sep 2009 15:23 +0100, "Peter Westlake" > <peter.westlake@pobox.com> wrote: >> On Wed, 09 Sep 2009 14:39 +0200, "Carsten Dominik" >> <carsten.dominik@gmail.com> wrote: >>> >>> On Sep 8, 2009, at 8:14 PM, Raffi R wrote: >> ... >>>> In org-mode normally, I can get this behaviour by pressing C-0 C-x >>>> C-e. Looking at org.el suggested that I should be able to simply >>>> provide the 0 as an argument, i.e. using (org-export 0). However, >>>> org-export seems to ignore that 0. >>> >>> (let ((current-prefix-arg 0)) >>> (call-interactively 'org-export)) >> >> This also happens to be the reason a function I was trying to write >> didn't work! I would never have worked it out for myself - does >> anyone have time to explain why the original form doesn't work? >> >> Here, incidentally, is the function I was writing. It works now! >> It is intended to be bound to C-c l in the agenda buffer, and >> was written by imitating org-agenda-refile: >> >> (defun org-agenda-store-link (arg) >> "Store a link to the item at point." >> (interactive "P") >> (let* ((marker (or (get-text-property (point) 'org-hd-marker) >> (org-agenda-error))) >> (buffer (marker-buffer marker)) >> (org-link-to-org-use-id t)) >> (with-current-buffer buffer >> (save-excursion >> (save-restriction >> (widen) >> (goto-char marker) >> (let ((current-prefix-arg 0)) >> (call-interactively 'org-store-link))))))) >> >> Is this the right way to do it? >> >> Peter. >> >> >> _______________________________________________ >> Emacs-orgmode mailing list >> Remember: use `Reply All' to send replies to the list. >> Emacs-orgmode@gnu.org >> http://lists.gnu.org/mailman/listinfo/emacs-orgmode > > > _______________________________________________ > Emacs-orgmode mailing list > Remember: use `Reply All' to send replies to the list. > Emacs-orgmode@gnu.org > http://lists.gnu.org/mailman/listinfo/emacs-orgmode ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: Feature request: org-agenda-store-link 2009-09-12 5:06 ` Carsten Dominik @ 2009-09-12 9:42 ` Peter Westlake 0 siblings, 0 replies; 14+ messages in thread From: Peter Westlake @ 2009-09-12 9:42 UTC (permalink / raw) To: Carsten Dominik; +Cc: emacs-orgmode On Sat, 12 Sep 2009 07:06 +0200, "Carsten Dominik" <carsten.dominik@gmail.com> wrote: > Hi Peter, > > that does make a lot of sense, why did we not think of this earlier? > Works now. > > Thanks! Well, thank *you* - I'm quite thrilled to have made a contribution, however small! Peter. > - Carsten > > On Sep 11, 2009, at 1:41 PM, Peter Westlake wrote: > > > Carsten, > > > > Could I request this as a small feature enhancement, please? > > Commands like org-refile have an agenda equivalent so that > > the same keys work in the agenda, and it would be very nice > > to be able to store a link to an item that way as well. > > > > Regards, > > > > Peter. > > > > On Wed, 09 Sep 2009 15:23 +0100, "Peter Westlake" > > <peter.westlake@pobox.com> wrote: > >> On Wed, 09 Sep 2009 14:39 +0200, "Carsten Dominik" > >> <carsten.dominik@gmail.com> wrote: > >>> > >>> On Sep 8, 2009, at 8:14 PM, Raffi R wrote: > >> ... > >>>> In org-mode normally, I can get this behaviour by pressing C-0 C-x > >>>> C-e. Looking at org.el suggested that I should be able to simply > >>>> provide the 0 as an argument, i.e. using (org-export 0). However, > >>>> org-export seems to ignore that 0. > >>> > >>> (let ((current-prefix-arg 0)) > >>> (call-interactively 'org-export)) > >> > >> This also happens to be the reason a function I was trying to write > >> didn't work! I would never have worked it out for myself - does > >> anyone have time to explain why the original form doesn't work? > >> > >> Here, incidentally, is the function I was writing. It works now! > >> It is intended to be bound to C-c l in the agenda buffer, and > >> was written by imitating org-agenda-refile: > >> > >> (defun org-agenda-store-link (arg) > >> "Store a link to the item at point." > >> (interactive "P") > >> (let* ((marker (or (get-text-property (point) 'org-hd-marker) > >> (org-agenda-error))) > >> (buffer (marker-buffer marker)) > >> (org-link-to-org-use-id t)) > >> (with-current-buffer buffer > >> (save-excursion > >> (save-restriction > >> (widen) > >> (goto-char marker) > >> (let ((current-prefix-arg 0)) > >> (call-interactively 'org-store-link))))))) > >> > >> Is this the right way to do it? > >> > >> Peter. > >> > >> > >> _______________________________________________ > >> Emacs-orgmode mailing list > >> Remember: use `Reply All' to send replies to the list. > >> Emacs-orgmode@gnu.org > >> http://lists.gnu.org/mailman/listinfo/emacs-orgmode > > > > > > _______________________________________________ > > Emacs-orgmode mailing list > > Remember: use `Reply All' to send replies to the list. > > Emacs-orgmode@gnu.org > > http://lists.gnu.org/mailman/listinfo/emacs-orgmode > ^ permalink raw reply [flat|nested] 14+ messages in thread
end of thread, other threads:[~2009-09-12 9:43 UTC | newest] Thread overview: 14+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2009-09-08 18:14 Prefixing a function call with C-digit Raffi R 2009-09-09 0:42 ` Haroldo Stenger 2009-09-09 0:44 ` Raffi R 2009-09-09 11:59 ` GTD and adding next actions under projects with remember Desmond Rivet 2009-09-09 12:25 ` Paul Mead 2009-09-09 15:30 ` Friedrich Delgado Friedrichs 2009-09-10 0:23 ` Desmond Rivet 2009-09-09 23:20 ` Matt Lundin 2009-09-09 12:39 ` Prefixing a function call with C-digit Carsten Dominik 2009-09-09 14:23 ` Peter Westlake 2009-09-09 14:33 ` Raffi R 2009-09-11 11:41 ` Feature request: org-agenda-store-link Peter Westlake 2009-09-12 5:06 ` Carsten Dominik 2009-09-12 9:42 ` Peter Westlake
Code repositories for project(s) associated with this public inbox https://git.savannah.gnu.org/cgit/emacs/org-mode.git This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).