From: RCY <recif@yahoo.com>
To: "Thomas S. Dye" <tsd@tsdye.com>
Cc: Emacs-orgmode@gnu.org
Subject: Re: Booktabs in new LaTeX exporter
Date: Fri, 28 Dec 2012 05:50:34 -0500 [thread overview]
Message-ID: <CAD_Xbc6tqCpN_J3TsEykDLZKT_JBoYTRAKCbxx+KJ9Gz=PbgDw@mail.gmail.com> (raw)
In-Reply-To: <m17go3j6k3.fsf@tsdye.com>
[-- Attachment #1: Type: text/plain, Size: 14602 bytes --]
Hi,
Thanks for looking into this. I tried your suggestions but I am still
having the problem. It seems that some but not all attributes I set are
recognized. So in the example below it sets sideways table but ignores the
booktabs and positioning attributes.
#+LATEX_CLASS: article
#+LATEX_HEADER: \usepackage{booktabs}
----org-file-----
* Test
#+CAPTION: Test table
#+attr_latex: :booktabs t :align |r|l| :float sidewaystable
|----+----|
| 1 | 2 |
|----+----|
| A1 | A2 |
| B1 | B2 |
| C1 | C2 |
|----+----|
-----latex buffer-----
:
\begin{sidewaystable}[htb]
\caption{Test table}
\begin{center}
\begin{tabular}{ll}
\hline
1 & 2 \\
\hline
A1 & A2 \\
B1 & B2 \\
C1 & C2 \\
\hline
\end{tabular}
\end{center}
\end{sidewaystable}
-------------------------
On Thu, Dec 27, 2012 at 8:42 PM, Thomas S. Dye <tsd@tsdye.com> wrote:
> Hmm,
>
> It works like a charm here.
>
> I add booktabs like this:
>
> (add-to-list 'org-export-latex-packages-alist '("" "booktabs"))
>
> Also, I noticed you have \[PACKAGES]. I don't escape the opening brace:
>
> (add-to-list 'org-e-latex-classes
> '("koma-article"
> "\\documentclass{scrartcl}
> [NO-DEFAULT-PACKAGES]
> [PACKAGES]
> [EXTRA]
> \\let\\itemize\\compactitem
> \\let\\description\\compactdesc
> \\let\\enumerate\\compactenum
> \\bibliography{local}
> \\newcommand{\\rc}{\\textsuperscript{14}C}
> \\newcolumntype{Y}{>{\\RaggedRight\\arraybackslash}X}"
> ("\\section{%s}" . "\\section*{%s}")
> ("\\subsection{%s}" . "\\subsection*{%s}")
> ("\\subsubsection{%s}" . "\\subsubsection*{%s}")
> ("\\paragraph{%s}" . "\\paragraph*{%s}")
> ("\\subparagraph{%s}" . "\\subparagraph*{%s}")))
>
> hth,
> Tom
>
> RCY <recif@yahoo.com> writes:
>
> > Hi,
> > I had tried t but then removed it when it did not work and the
> > documentation seemed to indicate that :booktabs was a toggle.
> > I tried your suggestion to add (setq org-e-latex-tables-booktabs t) to
> the
> > .emacs file but I am still getiing \hline. I did make sure to get the
> > latest version from git and I am running emacs 24.3.50.1.
> >
> > Thanks.
> >
> >
> > On Thu, Dec 27, 2012 at 7:17 PM, Thomas S. Dye <tsd@tsdye.com> wrote:
> >
> >> Aloha RCY,
> >>
> >> You can have this in your setup to enable booktabs globally:
> >>
> >> (setq org-e-latex-tables-booktabs t)
> >>
> >> Or, you can give a table this attribute:
> >>
> >> #+attr_latex: :booktabs t
> >>
> >> I think your example should work if you add the t after :booktabs.
> >>
> >> hth,
> >> Tom
> >>
> >> RCY <recif@yahoo.com> writes:
> >>
> >> > I am trying to use the booktabs package for tables in the new
> exporter,
> >> > however I am unable to get \toprule, etc instead of \hrule
> >> > I would appreciate any suggestions to fix this.
> >> >
> >> > As a minimal example, I started emacs -q, and evaluated the following:
> >> >
> >> > (setq org-install-dir "~/.emacs.d/src/org-mode")
> >> > (add-to-list 'load-path (concat org-install-dir "/contrib/lisp"))
> >> > (add-to-list 'load-path (concat org-install-dir "/lisp"))
> >> > (require 'org-e-latex)
> >> >
> >> > (add-to-list 'org-e-latex-classes
> >> > '("article"
> >> > "\\documentclass[11pt]{article}
> >> > \[DEFAULT-PACKAGES]
> >> > \[PACKAGES]
> >> > \[EXTRA]"
> >> > ("\\section{%s}" . "\\section*{%s}")
> >> > ("\\subsection{%s}" . "\\subsection*{%s}")
> >> > ("\\subsubsection{%s}" . "\\subsubsection*{%s}")))
> >> >
> >> > -----org.file-----------
> >> > #+LATEX_CLASS: article
> >> > #+LATEX_HEADER: \usepackage{booktabs}
> >> > * Test
> >> > #+ATTR_LATEX: :booktabs
> >> > #+CAPTION: Test table
> >> > |----+----|
> >> > | 1 | 2 |
> >> > |----+----|
> >> > | A1 | A2 |
> >> > | B1 | B2 |
> >> > | C1 | C2 |
> >> > |----+----|
> >> >
> >> > ------latex-buffer from org-export-latex-as-buffer-------
> >> > % Created 2012-12-27 Thu 18:44
> >> > \documentclass[11pt]{article}
> >> > \usepackage[utf8]{inputenc}
> >> > \usepackage[T1]{fontenc}
> >> > \usepackage{fixltx2e}
> >> > \usepackage{graphicx}
> >> > \usepackage{longtable}
> >> > \usepackage{float}
> >> > \usepackage{wrapfig}
> >> > \usepackage{soul}
> >> > \usepackage{textcomp}
> >> > \usepackage{marvosym}
> >> > \usepackage{wasysym}
> >> > \usepackage{latexsym}
> >> > \usepackage{amssymb}
> >> > \usepackage{hyperref}
> >> > \tolerance=1000
> >> > \usepackage{booktabs}
> >> > \providecommand{\alert}[1]{\textbf{#1}}
> >> >
> >> > \title{tst}
> >> > \author{RC}
> >> > \date{\today}
> >> > \hypersetup{
> >> > pdfkeywords={},
> >> > pdfsubject={},
> >> > pdfcreator={Emacs Org-mode version 7.9.2+}}
> >> >
> >> > \begin{document}
> >> >
> >> > \maketitle
> >> >
> >> > \setcounter{tocdepth}{3}
> >> > \tableofcontents
> >> > \vspace*{1cm}
> >> > \section{Test}
> >> > \label{sec-1}
> >> >
> >> > \begin{table}[htb]
> >> > \caption{Test table}
> >> > \begin{center}
> >> > \begin{tabular}{ll}
> >> > \hline
> >> > 1 & 2 \\
> >> > \hline
> >> > A1 & A2 \\
> >> > B1 & B2 \\
> >> > C1 & C2 \\
> >> > \hline
> >> > \end{tabular}
> >> > \end{center}
> >> > \end{table}
> >> >
> >> > \end{document}
> >> > I am trying to use the booktabs package for tables in the new
> >> > exporter, however I am unable to get \toprule, etc instead of \hrule
> >> >
> >> > I would appreciate any suggestions to fix this.
> >> >
> >> > As a minimal example, I started emacs -q, and evaluated the following:
> >> >
> >> > (setq org-install-dir "~/.emacs.d/src/org-mode")
> >> > (add-to-list 'load-path (concat org-install-dir "/contrib/lisp"))
> >> > (add-to-list 'load-path (concat org-install-dir "/lisp"))
> >> > (require 'org-e-latex)
> >> >
> >> > (add-to-list 'org-e-latex-classes
> >> > '("article"
> >> > "\\documentclass[11pt]{article}
> >> > \[DEFAULT-PACKAGES]
> >> > \[PACKAGES]
> >> > \[EXTRA]"
> >> > ("\\section{%s}" . "\\section*{%s}")
> >> > ("\\subsection{%s}" . "\\subsection*{%s}")
> >> > ("\\subsubsection{%s}" . "\\subsubsection*{%s}")))
> >> >
> >> > -----org.file-----------
> >> > #+LATEX_CLASS: article
> >> > #+LATEX_HEADER: \usepackage{booktabs}
> >> > * Test
> >> > #+ATTR_LATEX: :booktabs
> >> > #+CAPTION: Test table
> >> > |----+----|
> >> > | 1 | 2 |
> >> > |----+----|
> >> > | A1 | A2 |
> >> > | B1 | B2 |
> >> > | C1 | C2 |
> >> > |----+----|
> >> >
> >> > ------latex-buffer from org-export-latex-as-buffer-------
> >> > % Created 2012-12-27 Thu 18:44
> >> > \documentclass[11pt]{article}
> >> > \usepackage[utf8]{inputenc}
> >> > \usepackage[T1]{fontenc}
> >> > \usepackage{fixltx2e}
> >> > \usepackage{graphicx}
> >> > \usepackage{longtable}
> >> > \usepackage{float}
> >> > \usepackage{wrapfig}
> >> > \usepackage{soul}
> >> > \usepackage{textcomp}
> >> > \usepackage{marvosym}
> >> > \usepackage{wasysym}
> >> > \usepackage{latexsym}
> >> > \usepackage{amssymb}
> >> > \usepackage{hyperref}
> >> > \tolerance=1000
> >> > \usepackage{booktabs}
> >> > \providecommand{\alert}[1]{\textbf{#1}}
> >> >
> >> > \title{tst}
> >> > \author{RC}
> >> > \date{\today}
> >> > \hypersetup{
> >> > pdfkeywords={},
> >> > pdfsubject={},
> >> > pdfcreator={Emacs Org-mode version 7.9.2+}}
> >> >
> >> > \begin{document}
> >> >
> >> > \maketitle
> >> >
> >> > \setcounter{tocdepth}{3}
> >> > \tableofcontents
> >> > \vspace*{1cm}
> >> > \section{Test}
> >> > \label{sec-1}
> >> >
> >> > \begin{table}[htb]
> >> > \caption{Test table}
> >> > \begin{center}
> >> > \begin{tabular}{ll}
> >> > \hline
> >> > 1 & 2 \\
> >> > \hline
> >> > A1 & A2 \\
> >> > B1 & B2 \\
> >> > C1 & C2 \\
> >> > \hline
> >> > \end{tabular}
> >> > \end{center}
> >> > \end{table}
> >> >
> >> > \end{document}
> >> >
> >>
> >> --
> >> Thomas S. Dye
> >> http://www.tsdye.com
> >>
> > Hi,
> >
> > I had tried t but then removed it when it did not work and the
> > documentation seemed to indicate that :booktabs was a toggle.
> > I tried your suggestion to add (setq org-e-latex-tables-booktabs t)
> > to the .emacs file but I am still getiing \hline. I did make sure to
> > get the latest version from git and I am running emacs 24.3.50.1.
> >
> > Thanks.
> >
> >
> > On Thu, Dec 27, 2012 at 7:17 PM, Thomas S. Dye <tsd@tsdye.com> wrote:
> >
> > Aloha RCY,
> >
> > You can have this in your setup to enable booktabs globally:
> >
> > (setq org-e-latex-tables-booktabs t)
> >
> > Or, you can give a table this attribute:
> >
> > #+attr_latex: :booktabs t
> >
> > I think your example should work if you add the t after :booktabs.
> >
> > hth,
> > Tom
> >
> >
> >
> > RCY <recif@yahoo.com> writes:
> >
> > > I am trying to use the booktabs package for tables in the new
> > exporter,
> > > however I am unable to get \toprule, etc instead of \hrule
> > > I would appreciate any suggestions to fix this.
> > >
> > > As a minimal example, I started emacs -q, and evaluated the
> > following:
> > >
> > > (setq org-install-dir "~/.emacs.d/src/org-mode")
> > > (add-to-list 'load-path (concat org-install-dir
> > "/contrib/lisp"))
> > > (add-to-list 'load-path (concat org-install-dir "/lisp"))
> > > (require 'org-e-latex)
> > >
> > > (add-to-list 'org-e-latex-classes
> > > '("article"
> > > "\\documentclass[11pt]{article}
> > > \[DEFAULT-PACKAGES]
> > > \[PACKAGES]
> > > \[EXTRA]"
> > > ("\\section{%s}" . "\\section*{%s}")
> > > ("\\subsection{%s}" . "\\subsection*{%s}")
> > > ("\\subsubsection{%s}" . "\\subsubsection*{%s}")))
> > >
> > > -----org.file-----------
> > > #+LATEX_CLASS: article
> > > #+LATEX_HEADER: \usepackage{booktabs}
> > > * Test
> > > #+ATTR_LATEX: :booktabs
> > > #+CAPTION: Test table
> > > |----+----|
> > > | 1 | 2 |
> > > |----+----|
> > > | A1 | A2 |
> > > | B1 | B2 |
> > > | C1 | C2 |
> > > |----+----|
> > >
> > > ------latex-buffer from org-export-latex-as-buffer-------
> > > % Created 2012-12-27 Thu 18:44
> > > \documentclass[11pt]{article}
> > > \usepackage[utf8]{inputenc}
> > > \usepackage[T1]{fontenc}
> > > \usepackage{fixltx2e}
> > > \usepackage{graphicx}
> > > \usepackage{longtable}
> > > \usepackage{float}
> > > \usepackage{wrapfig}
> > > \usepackage{soul}
> > > \usepackage{textcomp}
> > > \usepackage{marvosym}
> > > \usepackage{wasysym}
> > > \usepackage{latexsym}
> > > \usepackage{amssymb}
> > > \usepackage{hyperref}
> > > \tolerance=1000
> > > \usepackage{booktabs}
> > > \providecommand{\alert}[1]{\textbf{#1}}
> > >
> > > \title{tst}
> > > \author{RC}
> > > \date{\today}
> > > \hypersetup{
> > > pdfkeywords={},
> > > pdfsubject={},
> > > pdfcreator={Emacs Org-mode version 7.9.2+}}
> > >
> > > \begin{document}
> > >
> > > \maketitle
> > >
> > > \setcounter{tocdepth}{3}
> > > \tableofcontents
> > > \vspace*{1cm}
> > > \section{Test}
> > > \label{sec-1}
> > >
> > > \begin{table}[htb]
> > > \caption{Test table}
> > > \begin{center}
> > > \begin{tabular}{ll}
> > > \hline
> > > 1 & 2 \\
> > > \hline
> > > A1 & A2 \\
> > > B1 & B2 \\
> > > C1 & C2 \\
> > > \hline
> > > \end{tabular}
> > > \end{center}
> > > \end{table}
> > >
> > > \end{document}
> > > I am trying to use the booktabs package for tables in the new
> > > exporter, however I am unable to get \toprule, etc instead of
> > \hrule
> > >
> > > I would appreciate any suggestions to fix this.
> > >
> > > As a minimal example, I started emacs -q, and evaluated the
> > following:
> > >
> > > (setq org-install-dir "~/.emacs.d/src/org-mode")
> > > (add-to-list 'load-path (concat org-install-dir
> > "/contrib/lisp"))
> > > (add-to-list 'load-path (concat org-install-dir "/lisp"))
> > > (require 'org-e-latex)
> > >
> > > (add-to-list 'org-e-latex-classes
> > > '("article"
> > > "\\documentclass[11pt]{article}
> > > \[DEFAULT-PACKAGES]
> > > \[PACKAGES]
> > > \[EXTRA]"
> > > ("\\section{%s}" . "\\section*{%s}")
> > > ("\\subsection{%s}" . "\\subsection*{%s}")
> > > ("\\subsubsection{%s}" . "\\subsubsection*{%s}")))
> > >
> > > -----org.file-----------
> > > #+LATEX_CLASS: article
> > > #+LATEX_HEADER: \usepackage{booktabs}
> > > * Test
> > > #+ATTR_LATEX: :booktabs
> > > #+CAPTION: Test table
> > > |----+----|
> > > | 1 | 2 |
> > > |----+----|
> > > | A1 | A2 |
> > > | B1 | B2 |
> > > | C1 | C2 |
> > > |----+----|
> > >
> > > ------latex-buffer from org-export-latex-as-buffer-------
> > > % Created 2012-12-27 Thu 18:44
> > > \documentclass[11pt]{article}
> > > \usepackage[utf8]{inputenc}
> > > \usepackage[T1]{fontenc}
> > > \usepackage{fixltx2e}
> > > \usepackage{graphicx}
> > > \usepackage{longtable}
> > > \usepackage{float}
> > > \usepackage{wrapfig}
> > > \usepackage{soul}
> > > \usepackage{textcomp}
> > > \usepackage{marvosym}
> > > \usepackage{wasysym}
> > > \usepackage{latexsym}
> > > \usepackage{amssymb}
> > > \usepackage{hyperref}
> > > \tolerance=1000
> > > \usepackage{booktabs}
> > > \providecommand{\alert}[1]{\textbf{#1}}
> > >
> > > \title{tst}
> > > \author{RC}
> > > \date{\today}
> > > \hypersetup{
> > > pdfkeywords={},
> > > pdfsubject={},
> > > pdfcreator={Emacs Org-mode version 7.9.2+}}
> > >
> > > \begin{document}
> > >
> > > \maketitle
> > >
> > > \setcounter{tocdepth}{3}
> > > \tableofcontents
> > > \vspace*{1cm}
> > > \section{Test}
> > > \label{sec-1}
> > >
> > > \begin{table}[htb]
> > > \caption{Test table}
> > > \begin{center}
> > > \begin{tabular}{ll}
> > > \hline
> > > 1 & 2 \\
> > > \hline
> > > A1 & A2 \\
> > > B1 & B2 \\
> > > C1 & C2 \\
> > > \hline
> > > \end{tabular}
> > > \end{center}
> > > \end{table}
> > >
> > > \end{document}
> > >
> >
> >
> > --
> > Thomas S. Dye
> > http://www.tsdye.com
> >
> >
>
> --
> Thomas S. Dye
> http://www.tsdye.com
>
[-- Attachment #2: Type: text/html, Size: 20887 bytes --]
next prev parent reply other threads:[~2012-12-28 10:50 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-12-27 23:57 Booktabs in new LaTeX exporter RCY
2012-12-28 0:17 ` Thomas S. Dye
2012-12-28 1:20 ` RCY
2012-12-28 1:42 ` Thomas S. Dye
2012-12-28 10:50 ` RCY [this message]
2012-12-28 17:27 ` Thomas S. Dye
2012-12-28 18:05 ` RCY
2012-12-28 19:06 ` Thomas S. Dye
2012-12-28 23:07 ` RCY
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
List information: https://www.orgmode.org/
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CAD_Xbc6tqCpN_J3TsEykDLZKT_JBoYTRAKCbxx+KJ9Gz=PbgDw@mail.gmail.com' \
--to=recif@yahoo.com \
--cc=Emacs-orgmode@gnu.org \
--cc=tsd@tsdye.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
Code repositories for project(s) associated with this public inbox
https://git.savannah.gnu.org/cgit/emacs/org-mode.git
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).