* installing the OpenDocumentText Exporter
@ 2011-06-13 2:47 Julian Burgos
2011-06-13 4:21 ` Jambunathan K
0 siblings, 1 reply; 5+ messages in thread
From: Julian Burgos @ 2011-06-13 2:47 UTC (permalink / raw)
To: Emacs-orgmode
Apologies for the basic question. I need some help installing the
OpenDocumentText Exporter using the ELPA (package manager). I´ve
added the org-odt repository by adding this to my .emacs file:
(setq package-archives '(("ELPA" . "http://tromey.com/elpa/")
("gnu" . "http://elpa.gnu.org/packages/")
("org-odt" .
"http://repo.or.cz/w/org-mode/org-jambu.git/blob_plain/HEAD:/packages/")
))
but the OpenDocumentText Exporter does not show up in the list of
available packages. What I am missing?
Many thanks,
Julian
--
Julian Mariano Burgos
Hafrannsóknastofnunin/Marine Research Institute
Skúlagata 4, 121 Reykjavík, Iceland
Sími/Telephone : +354-5752037
Bréfsími/Telefax: +354-5752001
Netfang/Email: julian@hafro.is, jmburgos@uw.edu
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: installing the OpenDocumentText Exporter
2011-06-13 2:47 installing the OpenDocumentText Exporter Julian Burgos
@ 2011-06-13 4:21 ` Jambunathan K
2011-06-13 12:08 ` Julian Burgos
0 siblings, 1 reply; 5+ messages in thread
From: Jambunathan K @ 2011-06-13 4:21 UTC (permalink / raw)
To: Julian Burgos; +Cc: Emacs-orgmode
Julian Burgos <jmburgos@uw.edu> writes:
> Apologies for the basic question. I need some help installing the
> OpenDocumentText Exporter using the ELPA (package manager). I´ve
> added the org-odt repository by adding this to my .emacs file:
>
> (setq package-archives '(("ELPA" . "http://tromey.com/elpa/")
> ("gnu" . "http://elpa.gnu.org/packages/")
> ("org-odt" .
> "http://repo.or.cz/w/org-mode/org-jambu.git/blob_plain/HEAD:/packages/")
> ))
>
> but the OpenDocumentText Exporter does not show up in the list of
> available packages. What I am missing?
I am not sure what the problem could be at your end. Does the
archive-contents get downloaded succesfully? Are you able to see
packages from the other repos?
Does the package manager report any problems in the *Messages* buffer.
I ran M-x list-packages with the settings that you have. I see that
archive-contents file is getting succesfully downloaded.
I see the following line in the *Packages* buffer.
--8<---------------cut here---------------start------------->8---
org-odt 20110519 available OpenDocumentText exporter for Orgmode
--8<---------------cut here---------------end--------------->8---
I see following lines in the *Messages* buffer:
--8<---------------cut here---------------start------------->8---
Contacting host: tromey.com:80
Reading [text/plain]... 11k of 11k (100%)
Reading... done.
Saving file c:/Documents and Settings/kjambunathan/My Documents/My Data/.emacs.d/elpa/archives/ELPA/archive-contents...
Wrote c:/Documents and Settings/kjambunathan/My Documents/My Data/.emacs.d/elpa/archives/ELPA/archive-contents
Contacting host: elpa.gnu.org:80
Reading [text/plain]... 738 bytes of 726 bytes (102%)
Reading... done.
Saving file c:/Documents and Settings/kjambunathan/My Documents/My Data/.emacs.d/elpa/archives/gnu/archive-contents...
Wrote c:/Documents and Settings/kjambunathan/My Documents/My Data/.emacs.d/elpa/archives/gnu/archive-contents
Contacting host: repo.or.cz:80
Saving file c:/Documents and Settings/kjambunathan/My Documents/My Data/.emacs.d/elpa/archives/org-odt/archive-contents...
Wrote c:/Documents and Settings/kjambunathan/My Documents/My Data/.emacs.d/elpa/archives/org-odt/archive-contents
--8<---------------cut here---------------end--------------->8---
>
> Many thanks,
>
> Julian
--
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: installing the OpenDocumentText Exporter
2011-06-13 4:21 ` Jambunathan K
@ 2011-06-13 12:08 ` Julian Burgos
2011-06-13 13:15 ` Jambunathan K
0 siblings, 1 reply; 5+ messages in thread
From: Julian Burgos @ 2011-06-13 12:08 UTC (permalink / raw)
To: Jambunathan K; +Cc: Emacs-orgmode
Hi
I don´t have the M-x list-packages option. When I do M-x
package-list-packages I get a list of packages, but org-odt is not
there. Not sure what is the problem. I´m using emacs 23.3.1 in
windows xp.
In the meanwhile, could you explain me how to install org-odt "by
hand", using the conventional tar file?
Many thanks,
Julian
On Mon, Jun 13, 2011 at 4:21 AM, Jambunathan K <kjambunathan@gmail.com> wrote:
> Julian Burgos <jmburgos@uw.edu> writes:
>
>> Apologies for the basic question. I need some help installing the
>> OpenDocumentText Exporter using the ELPA (package manager). I´ve
>> added the org-odt repository by adding this to my .emacs file:
>>
>> (setq package-archives '(("ELPA" . "http://tromey.com/elpa/")
>> ("gnu" . "http://elpa.gnu.org/packages/")
>> ("org-odt" .
>> "http://repo.or.cz/w/org-mode/org-jambu.git/blob_plain/HEAD:/packages/")
>> ))
>>
>> but the OpenDocumentText Exporter does not show up in the list of
>> available packages. What I am missing?
>
> I am not sure what the problem could be at your end. Does the
> archive-contents get downloaded succesfully? Are you able to see
> packages from the other repos?
>
> Does the package manager report any problems in the *Messages* buffer.
>
> I ran M-x list-packages with the settings that you have. I see that
> archive-contents file is getting succesfully downloaded.
>
> I see the following line in the *Packages* buffer.
>
> --8<---------------cut here---------------start------------->8---
> org-odt 20110519 available OpenDocumentText exporter for Orgmode
> --8<---------------cut here---------------end--------------->8---
>
> I see following lines in the *Messages* buffer:
>
> --8<---------------cut here---------------start------------->8---
> Contacting host: tromey.com:80
> Reading [text/plain]... 11k of 11k (100%)
> Reading... done.
> Saving file c:/Documents and Settings/kjambunathan/My Documents/My Data/.emacs.d/elpa/archives/ELPA/archive-contents...
> Wrote c:/Documents and Settings/kjambunathan/My Documents/My Data/.emacs.d/elpa/archives/ELPA/archive-contents
>
> Contacting host: elpa.gnu.org:80
> Reading [text/plain]... 738 bytes of 726 bytes (102%)
> Reading... done.
> Saving file c:/Documents and Settings/kjambunathan/My Documents/My Data/.emacs.d/elpa/archives/gnu/archive-contents...
> Wrote c:/Documents and Settings/kjambunathan/My Documents/My Data/.emacs.d/elpa/archives/gnu/archive-contents
>
> Contacting host: repo.or.cz:80
> Saving file c:/Documents and Settings/kjambunathan/My Documents/My Data/.emacs.d/elpa/archives/org-odt/archive-contents...
> Wrote c:/Documents and Settings/kjambunathan/My Documents/My Data/.emacs.d/elpa/archives/org-odt/archive-contents
> --8<---------------cut here---------------end--------------->8---
>
>
>
>>
>> Many thanks,
>>
>> Julian
>
> --
>
--
Julian Mariano Burgos
Hafrannsóknastofnunin/Marine Research Institute
Skúlagata 4, 121 Reykjavík, Iceland
Sími/Telephone : +354-5752037
Bréfsími/Telefax: +354-5752001
Netfang/Email: julian@hafro.is, jmburgos@uw.edu
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: installing the OpenDocumentText Exporter
2011-06-13 12:08 ` Julian Burgos
@ 2011-06-13 13:15 ` Jambunathan K
2011-06-13 16:14 ` Julian Burgos
0 siblings, 1 reply; 5+ messages in thread
From: Jambunathan K @ 2011-06-13 13:15 UTC (permalink / raw)
To: Julian Burgos; +Cc: Emacs-orgmode
Julian Burgos <jmburgos@uw.edu> writes:
> Hi
>
> I don´t have the M-x list-packages option. When I do M-x
> package-list-packages I get a list of packages, but org-odt is not
> there. Not sure what is the problem. I´m using emacs 23.3.1 in
> windows xp.
I am assuming that you are using a non-Emacs version of package.el. I
recommend that you use
1. This version of
http://repo.or.cz/w/emacs.git/blob_plain/1a0a666f941c99882093d7bd08ced15033bc3f0c:/lisp/emacs-lisp/package.el
if you are on Emacs-23
and
2. Delete hand installed package.el if you are on Emacs-24.
> In the meanwhile, could you explain me how to install org-odt "by
> hand", using the conventional tar file?
>
Let me know if you are still having issues after "upgrading" the
package.el.
I will share further instructions with you.
Jambunathan K.
> Many thanks,
>
> Julian
>
>
> On Mon, Jun 13, 2011 at 4:21 AM, Jambunathan K <kjambunathan@gmail.com> wrote:
>> Julian Burgos <jmburgos@uw.edu> writes:
>>
>>> Apologies for the basic question. I need some help installing the
>>> OpenDocumentText Exporter using the ELPA (package manager). I´ve
>>> added the org-odt repository by adding this to my .emacs file:
>>>
>>> (setq package-archives '(("ELPA" . "http://tromey.com/elpa/")
>>> ("gnu" . "http://elpa.gnu.org/packages/")
>>> ("org-odt" .
>>> "http://repo.or.cz/w/org-mode/org-jambu.git/blob_plain/HEAD:/packages/")
>>> ))
>>>
>>> but the OpenDocumentText Exporter does not show up in the list of
>>> available packages. What I am missing?
>>
>> I am not sure what the problem could be at your end. Does the
>> archive-contents get downloaded succesfully? Are you able to see
>> packages from the other repos?
>>
>> Does the package manager report any problems in the *Messages* buffer.
>>
>> I ran M-x list-packages with the settings that you have. I see that
>> archive-contents file is getting succesfully downloaded.
>>
>> I see the following line in the *Packages* buffer.
>>
>> --8<---------------cut here---------------start------------->8---
>> org-odt 20110519 available OpenDocumentText exporter for Orgmode
>> --8<---------------cut here---------------end--------------->8---
>>
>> I see following lines in the *Messages* buffer:
>>
>> --8<---------------cut here---------------start------------->8---
>> Contacting host: tromey.com:80
>> Reading [text/plain]... 11k of 11k (100%)
>> Reading... done.
>> Saving file c:/Documents and Settings/kjambunathan/My Documents/My
>> Data/.emacs.d/elpa/archives/ELPA/archive-contents...
>> Wrote c:/Documents and Settings/kjambunathan/My Documents/My
>> Data/.emacs.d/elpa/archives/ELPA/archive-contents
>>
>> Contacting host: elpa.gnu.org:80
>> Reading [text/plain]... 738 bytes of 726 bytes (102%)
>> Reading... done.
>> Saving file c:/Documents and Settings/kjambunathan/My Documents/My
>> Data/.emacs.d/elpa/archives/gnu/archive-contents...
>> Wrote c:/Documents and Settings/kjambunathan/My Documents/My
>> Data/.emacs.d/elpa/archives/gnu/archive-contents
>>
>> Contacting host: repo.or.cz:80
>> Saving file c:/Documents and Settings/kjambunathan/My Documents/My
>> Data/.emacs.d/elpa/archives/org-odt/archive-contents...
>> Wrote c:/Documents and Settings/kjambunathan/My Documents/My
>> Data/.emacs.d/elpa/archives/org-odt/archive-contents
>> --8<---------------cut here---------------end--------------->8---
>>
>>
>>
>>>
>>> Many thanks,
>>>
>>> Julian
>>
>> --
>>
--
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: installing the OpenDocumentText Exporter
2011-06-13 13:15 ` Jambunathan K
@ 2011-06-13 16:14 ` Julian Burgos
0 siblings, 0 replies; 5+ messages in thread
From: Julian Burgos @ 2011-06-13 16:14 UTC (permalink / raw)
To: Jambunathan K; +Cc: Emacs-orgmode
Ah! That was it! I got org-odt installed.
On Mon, Jun 13, 2011 at 1:15 PM, Jambunathan K <kjambunathan@gmail.com> wrote:
> Julian Burgos <jmburgos@uw.edu> writes:
>
>> Hi
>>
>> I don´t have the M-x list-packages option. When I do M-x
>> package-list-packages I get a list of packages, but org-odt is not
>> there. Not sure what is the problem. I´m using emacs 23.3.1 in
>> windows xp.
>
> I am assuming that you are using a non-Emacs version of package.el. I
> recommend that you use
>
> 1. This version of
>
> http://repo.or.cz/w/emacs.git/blob_plain/1a0a666f941c99882093d7bd08ced15033bc3f0c:/lisp/emacs-lisp/package.el
>
> if you are on Emacs-23
>
> and
>
> 2. Delete hand installed package.el if you are on Emacs-24.
>
>> In the meanwhile, could you explain me how to install org-odt "by
>> hand", using the conventional tar file?
>>
>
> Let me know if you are still having issues after "upgrading" the
> package.el.
>
> I will share further instructions with you.
>
> Jambunathan K.
>
>
>
>> Many thanks,
>>
>> Julian
>>
>>
>> On Mon, Jun 13, 2011 at 4:21 AM, Jambunathan K <kjambunathan@gmail.com> wrote:
>>> Julian Burgos <jmburgos@uw.edu> writes:
>>>
>>>> Apologies for the basic question. I need some help installing the
>>>> OpenDocumentText Exporter using the ELPA (package manager). I´ve
>>>> added the org-odt repository by adding this to my .emacs file:
>>>>
>>>> (setq package-archives '(("ELPA" . "http://tromey.com/elpa/")
>>>> ("gnu" . "http://elpa.gnu.org/packages/")
>>>> ("org-odt" .
>>>> "http://repo.or.cz/w/org-mode/org-jambu.git/blob_plain/HEAD:/packages/")
>>>> ))
>>>>
>>>> but the OpenDocumentText Exporter does not show up in the list of
>>>> available packages. What I am missing?
>>>
>>> I am not sure what the problem could be at your end. Does the
>>> archive-contents get downloaded succesfully? Are you able to see
>>> packages from the other repos?
>>>
>>> Does the package manager report any problems in the *Messages* buffer.
>>>
>>> I ran M-x list-packages with the settings that you have. I see that
>>> archive-contents file is getting succesfully downloaded.
>>>
>>> I see the following line in the *Packages* buffer.
>>>
>>> --8<---------------cut here---------------start------------->8---
>>> org-odt 20110519 available OpenDocumentText exporter for Orgmode
>>> --8<---------------cut here---------------end--------------->8---
>>>
>>> I see following lines in the *Messages* buffer:
>>>
>>> --8<---------------cut here---------------start------------->8---
>>> Contacting host: tromey.com:80
>>> Reading [text/plain]... 11k of 11k (100%)
>>> Reading... done.
>>> Saving file c:/Documents and Settings/kjambunathan/My Documents/My
>>> Data/.emacs.d/elpa/archives/ELPA/archive-contents...
>>> Wrote c:/Documents and Settings/kjambunathan/My Documents/My
>>> Data/.emacs.d/elpa/archives/ELPA/archive-contents
>>>
>>> Contacting host: elpa.gnu.org:80
>>> Reading [text/plain]... 738 bytes of 726 bytes (102%)
>>> Reading... done.
>>> Saving file c:/Documents and Settings/kjambunathan/My Documents/My
>>> Data/.emacs.d/elpa/archives/gnu/archive-contents...
>>> Wrote c:/Documents and Settings/kjambunathan/My Documents/My
>>> Data/.emacs.d/elpa/archives/gnu/archive-contents
>>>
>>> Contacting host: repo.or.cz:80
>>> Saving file c:/Documents and Settings/kjambunathan/My Documents/My
>>> Data/.emacs.d/elpa/archives/org-odt/archive-contents...
>>> Wrote c:/Documents and Settings/kjambunathan/My Documents/My
>>> Data/.emacs.d/elpa/archives/org-odt/archive-contents
>>> --8<---------------cut here---------------end--------------->8---
>>>
>>>
>>>
>>>>
>>>> Many thanks,
>>>>
>>>> Julian
>>>
>>> --
>>>
>
> --
>
--
Julian Mariano Burgos
Hafrannsóknastofnunin/Marine Research Institute
Skúlagata 4, 121 Reykjavík, Iceland
Sími/Telephone : +354-5752037
Bréfsími/Telefax: +354-5752001
Netfang/Email: julian@hafro.is, jmburgos@uw.edu
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2011-06-13 16:17 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-06-13 2:47 installing the OpenDocumentText Exporter Julian Burgos
2011-06-13 4:21 ` Jambunathan K
2011-06-13 12:08 ` Julian Burgos
2011-06-13 13:15 ` Jambunathan K
2011-06-13 16:14 ` Julian Burgos
Code repositories for project(s) associated with this public inbox
https://git.savannah.gnu.org/cgit/emacs/org-mode.git
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).