* archival mirroring source headline structure?
@ 2008-06-02 16:35 Adam Spiers
2008-06-09 1:56 ` Manuel Hermenegildo
2008-06-09 7:01 ` Dominik, C.
0 siblings, 2 replies; 6+ messages in thread
From: Adam Spiers @ 2008-06-02 16:35 UTC (permalink / raw)
To: org-mode mailing list
I just discovered `org-archive-save-context-info' - very nice!
especially the preservation of the outline path (olpath). Though it
might be even nicer if archival could optionally auto-vivify outline
paths and archive sub-headings under them. So if your source file
had:
* PROJECT foo
** NEXT bar
and you archived 'bar', it would check in the archive file whether
'foo' already exists, if not create it, and then archive bar under it.
So after incrementally archiving many sub-items to do with a single
project you would have all the sub-items gathered under that headline
in the archive file. Is this doable now, and if not would it be hard
to support?
Thanks!
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: archival mirroring source headline structure?
2008-06-02 16:35 archival mirroring source headline structure? Adam Spiers
@ 2008-06-09 1:56 ` Manuel Hermenegildo
2008-06-09 7:01 ` Dominik, C.
1 sibling, 0 replies; 6+ messages in thread
From: Manuel Hermenegildo @ 2008-06-09 1:56 UTC (permalink / raw)
To: Adam Spiers; +Cc: org-mode mailing list
> I just discovered `org-archive-save-context-info' - very nice!
> especially the preservation of the outline path (olpath). Though it
> might be even nicer if archival could optionally auto-vivify outline
> paths and archive sub-headings under them.
org-agenda-archive-to-archive-sibling is not quite this, but is pretty
close. It piggybacks on and preserves the structure of the original
org file. It works very well for me, I personally think it should
probably be the default. --Man
--
-------------------------------------------------------------------------------
Manuel Hermenegildo | Prof., C.S. Department
Director, IMDEA-Software and CLIP Group | T.U. of Madrid (UPM)
http://www.cliplab.org/herme | +34-91-336-7435 (W) -352-4819 (Fax)
-------------------------------------------------------------------------------
^ permalink raw reply [flat|nested] 6+ messages in thread
* RE: archival mirroring source headline structure?
2008-06-02 16:35 archival mirroring source headline structure? Adam Spiers
2008-06-09 1:56 ` Manuel Hermenegildo
@ 2008-06-09 7:01 ` Dominik, C.
2008-06-09 11:52 ` Adam Spiers
1 sibling, 1 reply; 6+ messages in thread
From: Dominik, C. @ 2008-06-09 7:01 UTC (permalink / raw)
To: Adam Spiers, org-mode mailing list
[-- Attachment #1.1: Type: text/plain, Size: 1716 bytes --]
Hi Adam,
I agree that this would be nice, but I believe it is almost impossible
to make this stable. Because the user is free to add to and change
the tree in the Org buffer, it is very easy to break this mechanism.
Also, the general case to puttin things into the correct place in the
archive is very complex. This best and only way to keep the structure
of a tree in tact for the archive it to use in-place archiving (with
the ARCHIVE tag) or maybe the archive sibling. And only move the
entire tree to an archive file when averything is done.
- Carsten
-----Original Message-----
From: emacs-orgmode-bounces+dominik=science.uva.nl@gnu.org on behalf of Adam Spiers
Sent: Mon 6/2/2008 6:35 PM
To: org-mode mailing list
Subject: [Orgmode] archival mirroring source headline structure?
I just discovered `org-archive-save-context-info' - very nice!
especially the preservation of the outline path (olpath). Though it
might be even nicer if archival could optionally auto-vivify outline
paths and archive sub-headings under them. So if your source file
had:
* PROJECT foo
** NEXT bar
and you archived 'bar', it would check in the archive file whether
'foo' already exists, if not create it, and then archive bar under it.
So after incrementally archiving many sub-items to do with a single
project you would have all the sub-items gathered under that headline
in the archive file. Is this doable now, and if not would it be hard
to support?
Thanks!
_______________________________________________
Emacs-orgmode mailing list
Remember: use `Reply All' to send replies to the list.
Emacs-orgmode@gnu.org
http://lists.gnu.org/mailman/listinfo/emacs-org
[-- Attachment #1.2: Type: text/html, Size: 2415 bytes --]
[-- Attachment #2: Type: text/plain, Size: 204 bytes --]
_______________________________________________
Emacs-orgmode mailing list
Remember: use `Reply All' to send replies to the list.
Emacs-orgmode@gnu.org
http://lists.gnu.org/mailman/listinfo/emacs-orgmode
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: archival mirroring source headline structure?
2008-06-09 7:01 ` Dominik, C.
@ 2008-06-09 11:52 ` Adam Spiers
2008-06-10 3:28 ` Dominik, C.
0 siblings, 1 reply; 6+ messages in thread
From: Adam Spiers @ 2008-06-09 11:52 UTC (permalink / raw)
To: org-mode mailing list
On Mon, Jun 09, 2008 at 09:01:22AM +0200, Dominik, C. wrote:
> Hi Adam,
>
> I agree that this would be nice, but I believe it is almost impossible
> to make this stable. Because the user is free to add to and change
> the tree in the Org buffer, it is very easy to break this mechanism.
If I understand you correctly, I don't actually view this as breakage.
If I have
* A
** B
** C
and I archive B, then rename A to D, then archive C, my archive file
becomes:
* A
** B
* D
** C
which is exactly what I want. Likewise if I were to relocate A to a
different level rather than rename it. Am I missing something?
I'll try `org-agenda-archive-to-archive-sibling' as suggested by
Manuel. Incidentally I notice that this function appears to be
undocumented.
Thanks both!
^ permalink raw reply [flat|nested] 6+ messages in thread
* RE: archival mirroring source headline structure?
2008-06-09 11:52 ` Adam Spiers
@ 2008-06-10 3:28 ` Dominik, C.
2008-06-10 10:00 ` Adam Spiers
0 siblings, 1 reply; 6+ messages in thread
From: Dominik, C. @ 2008-06-10 3:28 UTC (permalink / raw)
To: Adam Spiers, org-mode mailing list
[-- Attachment #1.1: Type: text/plain, Size: 1448 bytes --]
Hi Adam, I mean more complex possibilities, like
* A
** B
*** C
*** D
Archive C, do more work, then archive A. The possibilities are endless, it seems to me.
- Carsten
-----Original Message-----
From: emacs-orgmode-bounces+dominik=science.uva.nl@gnu.org on behalf of Adam Spiers
Sent: Mon 6/9/2008 1:52 PM
To: org-mode mailing list
Subject: Re: [Orgmode] archival mirroring source headline structure?
On Mon, Jun 09, 2008 at 09:01:22AM +0200, Dominik, C. wrote:
> Hi Adam,
>
> I agree that this would be nice, but I believe it is almost impossible
> to make this stable. Because the user is free to add to and change
> the tree in the Org buffer, it is very easy to break this mechanism.
If I understand you correctly, I don't actually view this as breakage.
If I have
* A
** B
** C
and I archive B, then rename A to D, then archive C, my archive file
becomes:
* A
** B
* D
** C
which is exactly what I want. Likewise if I were to relocate A to a
different level rather than rename it. Am I missing something?
I'll try `org-agenda-archive-to-archive-sibling' as suggested by
Manuel. Incidentally I notice that this function appears to be
undocumented.
Thanks both!
_______________________________________________
Emacs-orgmode mailing list
Remember: use `Reply All' to send replies to the list.
Emacs-orgmode@gnu.org
http://lists.gnu.org/mailman/listinfo/emacs-orgmode
[-- Attachment #1.2: Type: text/html, Size: 2178 bytes --]
[-- Attachment #2: Type: text/plain, Size: 204 bytes --]
_______________________________________________
Emacs-orgmode mailing list
Remember: use `Reply All' to send replies to the list.
Emacs-orgmode@gnu.org
http://lists.gnu.org/mailman/listinfo/emacs-orgmode
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: archival mirroring source headline structure?
2008-06-10 3:28 ` Dominik, C.
@ 2008-06-10 10:00 ` Adam Spiers
0 siblings, 0 replies; 6+ messages in thread
From: Adam Spiers @ 2008-06-10 10:00 UTC (permalink / raw)
To: org-mode mailing list
On Tue, Jun 10, 2008 at 05:28:04AM +0200, Dominik, C. wrote:
> Hi Adam, I mean more complex possibilities, like
>
> * A
> ** B
> *** C
> *** D
>
> Archive C, do more work, then archive A. The possibilities are endless, it seems to me.
With auto-vivification I don't see a problem here. Archiving C would
automatically create ancestors A and B if they didn't already exist.
Then archiving A later would simply merge the two trees together in
the archive and remove it from the source file.
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2008-06-10 10:00 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2008-06-02 16:35 archival mirroring source headline structure? Adam Spiers
2008-06-09 1:56 ` Manuel Hermenegildo
2008-06-09 7:01 ` Dominik, C.
2008-06-09 11:52 ` Adam Spiers
2008-06-10 3:28 ` Dominik, C.
2008-06-10 10:00 ` Adam Spiers
Code repositories for project(s) associated with this public inbox
https://git.savannah.gnu.org/cgit/emacs/org-mode.git
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).