* From state table to state diagram @ 2010-08-24 10:38 Gary 2010-08-24 11:03 ` Eric S Fraga 0 siblings, 1 reply; 14+ messages in thread From: Gary @ 2010-08-24 10:38 UTC (permalink / raw) To: emacs-orgmode I know there are already features in orgmode to create tables and to generate images from text diagrams (via ditaa). It is also possible, theoretically speaking, to convert from a state table representing a state machine to a diagram. Does anything exist, either in orgmode or externally, to do the latter (esp. to text diagrams)? I haven't been able to find anything. -- Gary Please do NOT send me "courtesy" replies off-list. ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: From state table to state diagram 2010-08-24 10:38 From state table to state diagram Gary @ 2010-08-24 11:03 ` Eric S Fraga 2010-08-24 11:24 ` Gary 2010-08-24 11:25 ` Eric S Fraga 0 siblings, 2 replies; 14+ messages in thread From: Eric S Fraga @ 2010-08-24 11:03 UTC (permalink / raw) To: Gary, emacs-orgmode Check out graphic. I imagine it would be straightforward to integrate this via babel if it hasn't already been done. "Gary" <orgmode@garydjones.name> wrote: >I know there are already features in orgmode to create tables and to >generate images from text diagrams (via ditaa). It is also possible, >theoretically speaking, to convert from a state table representing a >state machine to a diagram. Does anything exist, either in orgmode or >externally, to do the latter (esp. to text diagrams)? I haven't been >able to find anything. > >-- >Gary Please do NOT send me "courtesy" replies off-list. > > >_______________________________________________ >Emacs-orgmode mailing list >Please use `Reply All' to send replies to the list. >Emacs-orgmode@gnu.org >http://lists.gnu.org/mailman/listinfo/emacs-orgmode -- Sent from my Android phone with K-9 Mail. Please excuse my brevity. ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: From state table to state diagram 2010-08-24 11:03 ` Eric S Fraga @ 2010-08-24 11:24 ` Gary 2010-08-24 11:25 ` Eric S Fraga 1 sibling, 0 replies; 14+ messages in thread From: Gary @ 2010-08-24 11:24 UTC (permalink / raw) To: emacs-orgmode Eric S Fraga wrote: > Check out graphic. I imagine it would be straightforward to integrate this via babel if it hasn't already been done. Could you, or anyone else, perhaps elaborate, please? Searching for "graphic" on google and so on is... pointless. Thanks. I guess you mean org-babel rather than babel.el (an "interface to web translation services such as Babelfish"). -- Gary Please do NOT send me "courtesy" replies off-list. ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: From state table to state diagram 2010-08-24 11:03 ` Eric S Fraga 2010-08-24 11:24 ` Gary @ 2010-08-24 11:25 ` Eric S Fraga 2010-08-24 12:06 ` Gary 1 sibling, 1 reply; 14+ messages in thread From: Eric S Fraga @ 2010-08-24 11:25 UTC (permalink / raw) To: Eric S Fraga, Gary, emacs-orgmode Sorry, that should have been graphviz... typing on a phone. :-( "Eric S Fraga" <ucecesf@ucl.ac.uk> wrote: >Check out graphic. I imagine it would be straightforward to integrate this via babel if it hasn't already been done. > >"Gary" <orgmode@garydjones.name> wrote: > >>I know there are already features in orgmode to create tables and to >>generate images from text diagrams (via ditaa). It is also possible, >>theoretically speaking, to convert from a state table representing a >>state machine to a diagram. Does anything exist, either in orgmode or >>externally, to do the latter (esp. to text diagrams)? I haven't been >>able to find anything. >> >>-- >>Gary Please do NOT send me "courtesy" replies off-list. >> >> >>_______________________________________________ >>Emacs-orgmode mailing list >>Please use `Reply All' to send replies to the list. >>Emacs-orgmode@gnu.org >>http://lists.gnu.org/mailman/listinfo/emacs-orgmode > >-- >Sent from my Android phone with K-9 Mail. Please excuse my brevity. > >_______________________________________________ >Emacs-orgmode mailing list >Please use `Reply All' to send replies to the list. >Emacs-orgmode@gnu.org >http://lists.gnu.org/mailman/listinfo/emacs-orgmode -- Sent from my Android phone with K-9 Mail. Please excuse my brevity. ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: From state table to state diagram 2010-08-24 11:25 ` Eric S Fraga @ 2010-08-24 12:06 ` Gary 2010-08-24 23:28 ` Eric S Fraga 2010-08-25 0:33 ` Eric Schulte 0 siblings, 2 replies; 14+ messages in thread From: Gary @ 2010-08-24 12:06 UTC (permalink / raw) To: emacs-orgmode Eric S Fraga wrote: > Sorry, that should have been graphviz... typing on a phone. :-( :)) Okay, thanks. I know about graphviz, but it is not really what I am looking for. Ideally I would create a state transition table and then just "magically" get a diagram as a by-product. I can definitely see that the DOT language might be a good target though - generating that from a table should be easier than generating a diagram directly. Well, maybe it's a bit specific and nobody has done anything so I should look into it on my own :) -- Gary Please do NOT send me "courtesy" replies off-list. ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: Re: From state table to state diagram 2010-08-24 12:06 ` Gary @ 2010-08-24 23:28 ` Eric S Fraga 2010-08-25 0:33 ` Eric Schulte 1 sibling, 0 replies; 14+ messages in thread From: Eric S Fraga @ 2010-08-24 23:28 UTC (permalink / raw) To: Gary; +Cc: emacs-orgmode [-- Attachment #1: Type: text/plain, Size: 1496 bytes --] On Tue, 24 Aug 2010 14:06:32 +0200, Gary <orgmode@garydjones.name> wrote: > > Eric S Fraga wrote: > > > Sorry, that should have been graphviz... typing on a phone. :-( > > :)) > > Okay, thanks. I know about graphviz, but it is not really what I am > looking for. Ideally I would create a state transition table and then > just "magically" get a diagram as a by-product. I can definitely see > that the DOT language might be a good target though - generating that > from a table should be easier than generating a diagram directly. Yes, that is what I was thinking (but did not want to type on the little on-screen keyboard of my phone...) when I suggested graphviz: dot could be a good intermediate language. > Well, maybe it's a bit specific and nobody has done anything so I should > look into it on my own :) It is indeed specific but I think there would be some interest in what you manage to concoct so please post it here! If I were to have time to do this right now, I would probably use awk to convert a state transition table to a dot graph representation but only because I'm very comfortable with awk and much less so with emacs lisp... And the ease will depend on the type of transition table you have as the starting point, of course... As an aside, when it comes to actually generating a diagram, I would in practive typically use tikz due to the quality of the graphs that can be achieved. However, it may be harder to do a table \to tikz translation automatically. [-- Attachment #2: Type: text/plain, Size: 75 bytes --] -- Eric S Fraga GnuPG: 8F5C 279D 3907 E14A 5C29 570D C891 93D8 FFFC F67D [-- Attachment #3: Type: text/plain, Size: 201 bytes --] _______________________________________________ Emacs-orgmode mailing list Please use `Reply All' to send replies to the list. Emacs-orgmode@gnu.org http://lists.gnu.org/mailman/listinfo/emacs-orgmode ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: Re: From state table to state diagram 2010-08-24 12:06 ` Gary 2010-08-24 23:28 ` Eric S Fraga @ 2010-08-25 0:33 ` Eric Schulte 2010-09-23 15:02 ` Gary 1 sibling, 1 reply; 14+ messages in thread From: Eric Schulte @ 2010-08-25 0:33 UTC (permalink / raw) To: Gary; +Cc: emacs-orgmode Babel does support generating diagrams with graphviz via "dot" code blocks. Babel is also capable of converting Org-mode tables to list objects in a number of languages, so I'd recommend writing a table->dot script in your favorite language, and then using babel to handle the coordination and Org-mode integration. I'm happy to help in this regard, the first step would be something like the following example which assumes python is your preferred scripting language (as you can see I have no idea what your state table may look like)... --8<---------------cut here---------------start------------->8--- #+results: state-table | 1 | 2 | | 3 | 4 | #+source: table-to-dot #+begin_src python :var table=state-table python code here #+end_src #+begin_src dot :var text=table-to-dot(table=state-table) graph{ $text } #+end_src --8<---------------cut here---------------end--------------->8--- Once this is working I think it could make a great addition to the library of babel [1] (a collection of generally useful code blocks). Cheers -- Eric Gary <orgmode@garydjones.name> writes: > Eric S Fraga wrote: > >> Sorry, that should have been graphviz... typing on a phone. :-( > > :)) > > Okay, thanks. I know about graphviz, but it is not really what I am > looking for. Ideally I would create a state transition table and then > just "magically" get a diagram as a by-product. I can definitely see > that the DOT language might be a good target though - generating that > from a table should be easier than generating a diagram directly. > > Well, maybe it's a bit specific and nobody has done anything so I should > look into it on my own :) Footnotes: [1] http://orgmode.org/worg/org-contrib/babel/library-of-babel.php ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: From state table to state diagram 2010-08-25 0:33 ` Eric Schulte @ 2010-09-23 15:02 ` Gary 2010-09-24 10:00 ` Dan Davison 2010-09-25 7:40 ` Rainer M Krug 0 siblings, 2 replies; 14+ messages in thread From: Gary @ 2010-09-23 15:02 UTC (permalink / raw) To: emacs-orgmode Sorry, I've been rather lax on this :( I got dragged onto other stuff, went on training courses, and all sorts of other things. Eric Schulte wrote: > Babel does support generating diagrams with graphviz via "dot" code > blocks. Babel is also capable of converting Org-mode tables to list > objects in a number of languages, so I'd recommend writing a table->dot > script in your favorite language, and then using babel to handle the > coordination and Org-mode integration. That's all very easy for you to say :)) > I'm happy to help in this regard, the first step would be something like > the following example which assumes python is your preferred scripting > language (as you can see I have no idea what your state table may look > like)... Well, wikipedia suggests the following[1] (and goes into further detail as well[2]) | Current State -> | State | State | State | | Input v | A | B | C | |------------------+-------+-------+-------| | x | B | ... | ... | | y | ... | C | ... | which basically says that when the machine is in State A and receives 'x' then it transitions to State B, and when it receives a 'y' in State B it transitions to State C. > #+results: state-table > | 1 | 2 | > | 3 | 4 | > > #+source: table-to-dot > #+begin_src python :var table=state-table > python code here Okay. What should this python code here do? :) I know, it converts a table to dot-script, but are there any examples I could look at which take a table as input and output something (anything), just so I can see how the python code should expect its input? > #+end_src > > #+begin_src dot :var text=table-to-dot(table=state-table) > graph{ > $text > } > #+end_src > > Once this is working I think it could make a great addition to the > library of babel [1] (a collection of generally useful code blocks). Sure :) [1] http://en.wikipedia.org/wiki/Finite-state_machine#Concepts_and_vocabulary [2] http://en.wikipedia.org/wiki/State_transition_table ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: From state table to state diagram 2010-09-23 15:02 ` Gary @ 2010-09-24 10:00 ` Dan Davison 2010-09-25 7:40 ` Rainer M Krug 1 sibling, 0 replies; 14+ messages in thread From: Dan Davison @ 2010-09-24 10:00 UTC (permalink / raw) To: emacs-orgmode; +Cc: emacs-orgmode Gary <emacs-orgmode@garydjones.name> writes: > Sorry, I've been rather lax on this :( I got dragged onto other stuff, > went on training courses, and all sorts of other things. > > Eric Schulte wrote: >> Babel does support generating diagrams with graphviz via "dot" code >> blocks. Babel is also capable of converting Org-mode tables to list >> objects in a number of languages, so I'd recommend writing a table->dot >> script in your favorite language, and then using babel to handle the >> coordination and Org-mode integration. > > That's all very easy for you to say :)) > >> I'm happy to help in this regard, the first step would be something like >> the following example which assumes python is your preferred scripting >> language (as you can see I have no idea what your state table may look >> like)... > > Well, wikipedia suggests the following[1] (and goes into further detail > as well[2]) > | Current State -> | State | State | State | > | Input v | A | B | C | > |------------------+-------+-------+-------| > | x | B | ... | ... | > | y | ... | C | ... | > which basically says that when the machine is in State A and receives > 'x' then it transitions to State B, and when it receives a 'y' in State > B it transitions to State C. > >> #+results: state-table >> | 1 | 2 | >> | 3 | 4 | >> >> #+source: table-to-dot >> #+begin_src python :var table=state-table >> python code here > > Okay. What should this python code here do? :) I know, it converts a > table to dot-script, but are there any examples I could look at which > take a table as input and output something (anything), just so I can see > how the python code should expect its input? Hi Gary, The answer is that python receives that as [[1, 2], [3, 4]]. There are a few ways to arrive at that answer. For your table-to-dot script I suspect it is going to be easiest to use the ":results output" header argument, which means that the result will be the printed output of the python block (as opposed to...[1]). So using that, one way to see how python receives its input is: #+source: table-to-dot #+begin_src python :var table=state-table :results output print str(table) #+end_src #+results: table-to-dot : [[1, 2], [3, 4]] Another way is to place point in the code block and use C-c C-v C-v `org-babel-expand-src-block'. Alternatively, you might want to use a session to play around with the input data structure interactively. In that case, add ":session", and use either C-u C-c C-v C-z or C-u C-c C-v z to bring up the emacs python session with the input variable pre-loaded. Dan > >> #+end_src >> >> #+begin_src dot :var text=table-to-dot(table=state-table) >> graph{ >> $text >> } >> #+end_src >> >> Once this is working I think it could make a great addition to the >> library of babel [1] (a collection of generally useful code blocks). > > Sure :) > > [1] http://en.wikipedia.org/wiki/Finite-state_machine#Concepts_and_vocabulary > [2] http://en.wikipedia.org/wiki/State_transition_table > > > _______________________________________________ > Emacs-orgmode mailing list > Please use `Reply All' to send replies to the list. > Emacs-orgmode@gnu.org > http://lists.gnu.org/mailman/listinfo/emacs-orgmode Footnotes: [1] As opposed to the default mode in which the result of the block is the value of the last statement, turned into an Org-mode table if it is a list/vector type object. ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: Re: From state table to state diagram 2010-09-23 15:02 ` Gary 2010-09-24 10:00 ` Dan Davison @ 2010-09-25 7:40 ` Rainer M Krug 2010-09-27 6:27 ` Gary 1 sibling, 1 reply; 14+ messages in thread From: Rainer M Krug @ 2010-09-25 7:40 UTC (permalink / raw) To: emacs-orgmode [-- Attachment #1.1: Type: text/plain, Size: 3294 bytes --] Hi I really like the idea of this conversion from a State Transition Table to a State Transition Diagram as it is much easier to make a table then a graph. Unfortunately I don't know enough of python to help here. Could you please publish your solution here (and on worg) as it would be a very useful addition to org. Cheers, Rainer On Thu, Sep 23, 2010 at 5:02 PM, Gary <emacs-orgmode@garydjones.name> wrote: > Sorry, I've been rather lax on this :( I got dragged onto other stuff, > went on training courses, and all sorts of other things. > > Eric Schulte wrote: > > Babel does support generating diagrams with graphviz via "dot" code > > blocks. Babel is also capable of converting Org-mode tables to list > > objects in a number of languages, so I'd recommend writing a table->dot > > script in your favorite language, and then using babel to handle the > > coordination and Org-mode integration. > > That's all very easy for you to say :)) > > > I'm happy to help in this regard, the first step would be something like > > the following example which assumes python is your preferred scripting > > language (as you can see I have no idea what your state table may look > > like)... > > Well, wikipedia suggests the following[1] (and goes into further detail > as well[2]) > | Current State -> | State | State | State | > | Input v | A | B | C | > |------------------+-------+-------+-------| > | x | B | ... | ... | > | y | ... | C | ... | > which basically says that when the machine is in State A and receives > 'x' then it transitions to State B, and when it receives a 'y' in State > B it transitions to State C. > > > #+results: state-table > > | 1 | 2 | > > | 3 | 4 | > > > > #+source: table-to-dot > > #+begin_src python :var table=state-table > > python code here > > Okay. What should this python code here do? :) I know, it converts a > table to dot-script, but are there any examples I could look at which > take a table as input and output something (anything), just so I can see > how the python code should expect its input? > > > #+end_src > > > > #+begin_src dot :var text=table-to-dot(table=state-table) > > graph{ > > $text > > } > > #+end_src > > > > Once this is working I think it could make a great addition to the > > library of babel [1] (a collection of generally useful code blocks). > > Sure :) > > [1] > http://en.wikipedia.org/wiki/Finite-state_machine#Concepts_and_vocabulary > [2] http://en.wikipedia.org/wiki/State_transition_table > > > _______________________________________________ > Emacs-orgmode mailing list > Please use `Reply All' to send replies to the list. > Emacs-orgmode@gnu.org > http://lists.gnu.org/mailman/listinfo/emacs-orgmode > -- NEW GERMAN FAX NUMBER!!! Rainer M. Krug, PhD (Conservation Ecology, SUN), MSc (Conservation Biology, UCT), Dipl. Phys. (Germany) Centre of Excellence for Invasion Biology Natural Sciences Building Office Suite 2039 Stellenbosch University Main Campus, Merriman Avenue Stellenbosch South Africa Cell: +27 - (0)83 9479 042 Fax: +27 - (0)86 516 2782 Fax: +49 - (0)321 2125 2244 email: Rainer@krugs.de Skype: RMkrug Google: R.M.Krug@gmail.com [-- Attachment #1.2: Type: text/html, Size: 4598 bytes --] [-- Attachment #2: Type: text/plain, Size: 201 bytes --] _______________________________________________ Emacs-orgmode mailing list Please use `Reply All' to send replies to the list. Emacs-orgmode@gnu.org http://lists.gnu.org/mailman/listinfo/emacs-orgmode ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: From state table to state diagram 2010-09-25 7:40 ` Rainer M Krug @ 2010-09-27 6:27 ` Gary 2010-09-27 15:21 ` Mark Elston 2010-09-28 14:04 ` Rainer M Krug 0 siblings, 2 replies; 14+ messages in thread From: Gary @ 2010-09-27 6:27 UTC (permalink / raw) To: emacs-orgmode Rainer M Krug wrote: > I really like the idea of this conversion from a State Transition Table to a > State Transition Diagram as it is much easier to make a table then a > graph. Easier to maintain, too - I ahte trying to reorganise all the transition arrows when I change something :)) > Unfortunately I don't know enough of python to help here. I'm learning it in order to do this :P > Could you please publish your solution here (and on worg) as it would be a > very useful addition to org. Sure :) ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: Re: From state table to state diagram 2010-09-27 6:27 ` Gary @ 2010-09-27 15:21 ` Mark Elston 2010-09-28 14:04 ` Rainer M Krug 1 sibling, 0 replies; 14+ messages in thread From: Mark Elston @ 2010-09-27 15:21 UTC (permalink / raw) To: emacs-orgmode Gary, One other request for you to entertain. When you get into the Python code (I can help with this, if you need it) think about organizing it such that you can use multiple output mechanisms. For example, default it to use dot as you have been talking about but allow for the use of tikz as Erik Fraga mentioned in August. This would imply converting to some intermediate representation from the table form and then passing that data to a dynamically selected back-end output engine. I suggest tikz as an alternative since it can make such beautiful graphs. I haven't made use of babel yet so I don't know all its ins and outs but I expect that there are ways of passing additional information to the language doing the heavy lifting so we could add various output modules... Mark On 9/26/2010 11:27 PM, Gary wrote: > Rainer M Krug wrote: > >> I really like the idea of this conversion from a State Transition Table to a >> State Transition Diagram as it is much easier to make a table then a >> graph. > > Easier to maintain, too - I ahte trying to reorganise all the transition > arrows when I change something :)) > >> Unfortunately I don't know enough of python to help here. > > I'm learning it in order to do this :P > >> Could you please publish your solution here (and on worg) as it would be a >> very useful addition to org. > > Sure :) > ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: Re: From state table to state diagram 2010-09-27 6:27 ` Gary 2010-09-27 15:21 ` Mark Elston @ 2010-09-28 14:04 ` Rainer M Krug 2010-11-24 1:25 ` Vladimir Alexiev 1 sibling, 1 reply; 14+ messages in thread From: Rainer M Krug @ 2010-09-28 14:04 UTC (permalink / raw) To: emacs-orgmode [-- Attachment #1.1: Type: text/plain, Size: 1667 bytes --] I just started, in another context, to look into radio tables, and I thought - wouldn't this be an option? I mean - putting a radio table into a plantuml block and translating it, should not be to difficult? And it would be perfectly in line with org. The same could be done for graphviz. Just an idea, Cheers, Rainer On Mon, Sep 27, 2010 at 8:27 AM, Gary <emacs-orgmode@garydjones.name> wrote: > Rainer M Krug wrote: > > > I really like the idea of this conversion from a State Transition Table > to a > > State Transition Diagram as it is much easier to make a table then a > > graph. > > Easier to maintain, too - I ahte trying to reorganise all the transition > arrows when I change something :)) > > > Unfortunately I don't know enough of python to help here. > > I'm learning it in order to do this :P > > > Could you please publish your solution here (and on worg) as it would be > a > > very useful addition to org. > > Sure :) > > > _______________________________________________ > Emacs-orgmode mailing list > Please use `Reply All' to send replies to the list. > Emacs-orgmode@gnu.org > http://lists.gnu.org/mailman/listinfo/emacs-orgmode > -- NEW GERMAN FAX NUMBER!!! Rainer M. Krug, PhD (Conservation Ecology, SUN), MSc (Conservation Biology, UCT), Dipl. Phys. (Germany) Centre of Excellence for Invasion Biology Natural Sciences Building Office Suite 2039 Stellenbosch University Main Campus, Merriman Avenue Stellenbosch South Africa Cell: +27 - (0)83 9479 042 Fax: +27 - (0)86 516 2782 Fax: +49 - (0)321 2125 2244 email: Rainer@krugs.de Skype: RMkrug Google: R.M.Krug@gmail.com [-- Attachment #1.2: Type: text/html, Size: 2504 bytes --] [-- Attachment #2: Type: text/plain, Size: 201 bytes --] _______________________________________________ Emacs-orgmode mailing list Please use `Reply All' to send replies to the list. Emacs-orgmode@gnu.org http://lists.gnu.org/mailman/listinfo/emacs-orgmode ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: From state table to state diagram 2010-09-28 14:04 ` Rainer M Krug @ 2010-11-24 1:25 ` Vladimir Alexiev 0 siblings, 0 replies; 14+ messages in thread From: Vladimir Alexiev @ 2010-11-24 1:25 UTC (permalink / raw) To: emacs-orgmode You first need to decide on a syntax: how many cols in the table and what do they mean. A Confluence plugin does that. You may want to check it out for inspiration and nice examples: https://studio.plugins.atlassian.com/wiki/display/GVIZ/Confluence+Graphviz+Plugin https://studio.plugins.atlassian.com/wiki/display/GVIZ/Graph-from-table+Macro Dot is a really simple language, so translating to it should be easy. Eg | state1 | state2 | transition | becomes state1 -> state2 [label="transition"] ^ permalink raw reply [flat|nested] 14+ messages in thread
end of thread, other threads:[~2010-11-24 1:40 UTC | newest] Thread overview: 14+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2010-08-24 10:38 From state table to state diagram Gary 2010-08-24 11:03 ` Eric S Fraga 2010-08-24 11:24 ` Gary 2010-08-24 11:25 ` Eric S Fraga 2010-08-24 12:06 ` Gary 2010-08-24 23:28 ` Eric S Fraga 2010-08-25 0:33 ` Eric Schulte 2010-09-23 15:02 ` Gary 2010-09-24 10:00 ` Dan Davison 2010-09-25 7:40 ` Rainer M Krug 2010-09-27 6:27 ` Gary 2010-09-27 15:21 ` Mark Elston 2010-09-28 14:04 ` Rainer M Krug 2010-11-24 1:25 ` Vladimir Alexiev
Code repositories for project(s) associated with this public inbox https://git.savannah.gnu.org/cgit/emacs/org-mode.git This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).