From: Eric S Fraga <e.fraga@ucl.ac.uk>
To: Daniel Bausch <DanielBausch@gmx.de>
Cc: emacs-orgmode@gnu.org
Subject: Re: [RFC] Standardized code block keywords
Date: Mon, 24 Oct 2011 08:37:13 +0100 [thread overview]
Message-ID: <87sjmiq1qu.fsf@ucl.ac.uk> (raw)
In-Reply-To: <201110231442.17386.DanielBausch@gmx.de> (Daniel Bausch's message of "Sun, 23 Oct 2011 14:42:17 +0200")
Daniel Bausch <DanielBausch@gmx.de> writes:
> Hi,
>
>> named code blocks [1] -- "source" "srcname" "function"
>> calling external functions [2] -- "call" "lob"
>> named data [3] -- "tblname" "resname" "results" "data"
>
> what about "#+name:" for [1] and [3], and "#+call:" for [2] ?
>
> That a table or list contains data is obvious. The only thing, the additional
> line is for, is to "name" it. That a source block contains source is also
> obvious and is already noted by the use of #+begin_src, so why duplicate the
> "src"-part?
>
> Daniel
I don't know if I've left it too late to vote on this but...
I would go for "name" for [1] and [3] and "call" for [2].
I can, however, see the need for distinguishing between data tables and
results so could be convinced that "data" and "results" should be used
for [3]. In any case, I do know that I dislike srcname and tblname...
--
: Eric S Fraga (GnuPG: 0xC89193D8FFFCF67D) in Emacs 24.0.90.1
: using Org-mode version 7.7 (release_7.7.452.g767f5)
next prev parent reply other threads:[~2011-10-24 9:48 UTC|newest]
Thread overview: 132+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-10-20 19:43 [ANN] BREAKING CHANGE -- removing #+BABEL file-wide property lines Eric Schulte
2011-10-20 20:06 ` Nick Dokos
2011-10-20 20:12 ` Eric Schulte
2011-10-20 20:51 ` Nick Dokos
2011-10-20 21:04 ` Sebastien Vauban
2011-10-20 21:50 ` [RFC] Standardized code block keywords Eric Schulte
2011-10-21 1:52 ` Thomas S. Dye
2011-10-21 2:57 ` Nick Dokos
2011-10-21 7:26 ` Christian Moe
2011-10-21 16:12 ` Eric Schulte
2011-10-21 19:10 ` Thomas S. Dye
2011-10-23 12:20 ` Daniel Bausch
2011-10-23 16:09 ` Thomas S. Dye
2011-10-24 5:49 ` Daniel Bausch
2011-10-21 8:17 ` Sebastien Vauban
2011-10-21 16:17 ` Eric Schulte
2011-10-21 17:37 ` Sebastien Vauban
[not found] ` <CAGhLh6GXg6nMZ-xdu-EP=YRx7Pznrme2Yq1S0vdc6Yq0tPMxFg@mail.gmail.com>
2011-10-25 6:59 ` Rainer M Krug
2011-10-21 16:08 ` Eric Schulte
2011-10-21 16:05 ` Eric Schulte
2011-10-21 18:02 ` Thomas S. Dye
2011-10-22 15:19 ` Eric Schulte
2011-10-21 7:43 ` Torsten Wagner
2011-10-21 8:27 ` Sebastien Vauban
2011-10-21 16:25 ` Eric Schulte
2011-10-21 16:24 ` Eric Schulte
2011-10-21 17:41 ` Sebastien Vauban
2011-10-24 1:06 ` Torsten Wagner
2011-10-25 6:44 ` Rainer M Krug
2011-10-25 7:24 ` Jambunathan K
2011-10-25 8:21 ` Sebastien Vauban
2011-10-21 12:22 ` Nicolas Goaziou
2011-10-21 16:27 ` Eric Schulte
2011-10-21 17:48 ` Eric Schulte
2011-10-21 19:24 ` Viktor Rosenfeld
2011-10-23 12:42 ` Daniel Bausch
2011-10-24 7:37 ` Eric S Fraga [this message]
2011-10-24 14:39 ` Darlan Cavalcante Moreira
2011-10-24 7:47 ` Sebastien Vauban
2011-10-25 1:30 ` Eric Schulte
2011-10-25 7:14 ` Daniel Bausch
2011-10-25 8:14 ` Sebastien Vauban
2011-10-25 14:44 ` Eric Schulte
2011-10-25 15:38 ` Christian Moe
2011-10-25 15:42 ` Nick Dokos
2011-10-25 16:28 ` Martyn Jago
2011-10-25 16:49 ` Eric Schulte
2011-10-25 17:21 ` Nick Dokos
2011-10-26 5:58 ` Daniel Bausch
2011-10-26 13:10 ` Giovanni Ridolfi
2011-10-26 14:41 ` Daniel Bausch
2011-10-26 15:04 ` Nick Dokos
2011-10-27 5:25 ` Daniel Bausch
2011-10-28 16:49 ` Eric Schulte
2011-10-28 18:31 ` Eric Schulte
2011-10-28 18:40 ` Nick Dokos
2011-10-28 18:52 ` Eric Schulte
2011-10-28 23:22 ` Nick Dokos
2011-10-28 23:39 ` Thomas S. Dye
2011-10-29 2:18 ` Nick Dokos
2011-10-31 7:25 ` Daniel Bausch
2011-10-31 19:01 ` Eric Schulte
2011-11-01 6:34 ` C-c C-c not working at end of #+end_src line (was: [RFC] Standardized code block keywords) Daniel Bausch
2011-10-25 14:17 ` [RFC] Standardized code block keywords Eric Schulte
2011-10-26 5:41 ` Daniel Bausch
2011-10-26 6:17 ` Thomas S. Dye
2011-10-26 12:16 ` Eric Schulte
2011-10-21 18:14 ` Thorsten
2011-10-20 21:34 ` [ANN] BREAKING CHANGE -- removing #+BABEL file-wide property lines Eric Schulte
2011-10-20 21:44 ` suvayu ali
2011-10-20 21:52 ` Eric Schulte
2011-10-20 22:23 ` Suvayu Ali
2011-10-20 21:47 ` Sebastien Vauban
2011-10-20 21:54 ` Eric Schulte
2011-10-20 21:57 ` Nick Dokos
2011-10-20 21:48 ` Nick Dokos
2011-10-20 21:57 ` Eric Schulte
2011-10-20 22:08 ` Nick Dokos
2011-10-20 22:18 ` Eric Schulte
2011-10-21 7:28 ` Sebastien Vauban
2011-10-21 8:14 ` Christian Moe
2011-10-21 9:12 ` Rainer M Krug
2011-10-21 10:47 ` Christian Moe
2011-10-21 10:59 ` Rainer M Krug
2011-10-21 11:17 ` Christian Moe
2011-10-21 11:18 ` Rainer M Krug
2011-10-21 17:37 ` Eric Schulte
2011-10-21 18:09 ` Nick Dokos
2011-10-22 15:25 ` Eric Schulte
2011-10-21 18:35 ` Rainer M Krug
2011-10-21 18:40 ` Rainer M Krug
2011-10-22 7:58 ` Christian Moe
2011-10-24 9:44 ` Rainer M Krug
2011-10-22 15:52 ` Eric Schulte
2011-10-22 19:07 ` Christian Moe
2011-10-24 10:10 ` Rainer M Krug
2011-10-24 11:37 ` Christian Moe
2011-10-24 12:11 ` Sebastien Vauban
2011-10-24 12:38 ` Christian Moe
2011-10-24 15:07 ` Nicolas Goaziou
2011-10-24 9:50 ` Rainer M Krug
2011-10-25 9:35 ` Sebastien Vauban
2011-10-25 10:06 ` Rainer M Krug
2011-10-25 10:31 ` Sebastien Vauban
2011-10-25 11:47 ` Rainer M Krug
2011-10-25 14:13 ` Eric Schulte
2011-10-26 14:00 ` Sebastien Vauban
2011-10-26 15:20 ` Eric Schulte
2011-10-22 15:26 ` Eric Schulte
2011-10-21 20:24 ` Christian Moe
2011-10-21 21:05 ` Darlan Cavalcante Moreira
2011-10-22 7:08 ` Sebastien Vauban
2011-10-22 15:53 ` Eric Schulte
2011-10-24 18:07 ` Darlan Cavalcante Moreira
2011-10-31 18:53 ` Eric Schulte
2011-10-31 20:18 ` Samuel Wales
[not found] ` <87obwwkia5.fsf@gmail.com>
[not found] ` <CAJcAo8scJXx=3s0f_FDAJXFKW2uh5gFTHwgDRbM6xXohr5ZPzQ@mail.gmail.com>
2011-10-31 22:22 ` Samuel Wales
2011-11-01 1:28 ` Eric Schulte
2011-11-01 14:26 ` Nick Dokos
2011-11-01 15:02 ` Nick Dokos
2011-11-01 15:17 ` Eric Schulte
2011-11-02 11:12 ` Rainer M Krug
2011-11-02 12:18 ` Nicolas Goaziou
2011-11-02 14:16 ` Rainer M Krug
2011-11-03 18:40 ` Eric Schulte
2011-11-03 18:51 ` Jambunathan K
2011-11-04 9:15 ` Rainer M Krug
2011-11-02 12:57 ` Brian Wightman
2011-11-02 14:18 ` Rainer M Krug
2011-11-03 1:29 ` Bastien
2011-10-20 21:27 ` Christian Moe
2011-10-20 21:32 ` Nick Dokos
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
List information: https://www.orgmode.org/
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87sjmiq1qu.fsf@ucl.ac.uk \
--to=e.fraga@ucl.ac.uk \
--cc=DanielBausch@gmx.de \
--cc=emacs-orgmode@gnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
Code repositories for project(s) associated with this public inbox
https://git.savannah.gnu.org/cgit/emacs/org-mode.git
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).