* Re: Emacs-orgmode Digest, Vol 30, Issue 39 [not found] <20080826151404.0996C2179B@mailhost.cs.tu-berlin.de> @ 2008-08-26 17:57 ` Stephan Schmitt 2008-08-26 18:08 ` Eric Schulte 0 siblings, 1 reply; 15+ messages in thread From: Stephan Schmitt @ 2008-08-26 17:57 UTC (permalink / raw) To: emacs-orgmode, Eric Schulte Eric Schulte wrote: > On Tuesday, August 26, at 14:36, Sebastian Rose wrote: > > The buffer is modified after C-M-g and emacs asks if I want to save it. > > That is certainly something to figure out. > This happens already if you press tab with the cursor located inside a table, so this is probably an org issue. Eric, did you know that Carsten provided a function called org-table-to-lisp in org-6.06b? I think with this you can refactor your code to be more modular and thus better maintainable and extensible. Regards, Stephan ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: Emacs-orgmode Digest, Vol 30, Issue 39 2008-08-26 17:57 ` Emacs-orgmode Digest, Vol 30, Issue 39 Stephan Schmitt @ 2008-08-26 18:08 ` Eric Schulte 2008-08-26 23:09 ` org-plot (generating graphs from org-mode) Eric Schulte 0 siblings, 1 reply; 15+ messages in thread From: Eric Schulte @ 2008-08-26 18:08 UTC (permalink / raw) To: Stephan Schmitt; +Cc: emacs-orgmode On Tuesday, August 26, at 19:57, Stephan Schmitt wrote: > Eric Schulte wrote: > > On Tuesday, August 26, at 14:36, Sebastian Rose wrote: > > > The buffer is modified after C-M-g and emacs asks if I want to save it. > > > > That is certainly something to figure out. > > > > This happens already if you press tab with the cursor > located inside a table, so this is probably an org issue. I had been using tab `org-cycle' in some cases to position the cursor on selected columns, so that is probably the cause. > Eric, did you know that Carsten provided a function called > org-table-to-lisp in org-6.06b? I think with this you can > refactor your code to be more modular and thus better > maintainable and extensible. I was not aware of that function. It should certainly help, both in cleaning up the code, and hopefully removing the reliance on `org-cycle'. Using `org-table-to-lisp' should also eliminate the 'Not in table data field' error that Sebastian mentioned. Thanks -- Eric > Regards, > Stephan -- schulte ^ permalink raw reply [flat|nested] 15+ messages in thread
* org-plot (generating graphs from org-mode) 2008-08-26 18:08 ` Eric Schulte @ 2008-08-26 23:09 ` Eric Schulte 2008-08-27 9:30 ` Sebastian Rose ` (2 more replies) 0 siblings, 3 replies; 15+ messages in thread From: Eric Schulte @ 2008-08-26 23:09 UTC (permalink / raw) To: Stephan Schmitt, emacs-orgmode On Tuesday, August 26, at 11:08, Eric Schulte wrote: > On Tuesday, August 26, at 19:57, Stephan Schmitt wrote: > > Eric, did you know that Carsten provided a function called > > org-table-to-lisp in org-6.06b? I think with this you can > > refactor your code to be more modular and thus better > > maintainable and extensible. I have switched over to using `org-table-to-lisp' for all table manipulation, and (at least in my environment), it seems to have made the graphing functions faster, and much more reliable (no longer do I have to run a function twice to generate a graph). I believe this should fix most of the bugs mentioned previously. Also, I have finished support for 3d graphing. The updated version is up on my git repo at http://github.com/eschulte/org-plot/tree/master or git clone git://github.com/eschulte/org-plot.git Of course if anyone has any comments, problems, or suggestions please let me know. Thanks -- Eric -- schulte ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: org-plot (generating graphs from org-mode) 2008-08-26 23:09 ` org-plot (generating graphs from org-mode) Eric Schulte @ 2008-08-27 9:30 ` Sebastian Rose 2008-08-27 15:02 ` Eric Schulte 2008-08-27 9:32 ` Sebastian Rose 2008-08-29 11:16 ` William Henney 2 siblings, 1 reply; 15+ messages in thread From: Sebastian Rose @ 2008-08-27 9:30 UTC (permalink / raw) To: emacs-orgmode Hi Eric, Great! This version fixes ALL the bugs I mentioned in my previous email on emacs 23 !!! I.e. - It always renders the plot after the first C-M-g - All three tables work And it's much faster indeed! Thank's, it's fantastic :-) - Sebastian Eric Schulte wrote: > On Tuesday, August 26, at 11:08, Eric Schulte wrote: > > On Tuesday, August 26, at 19:57, Stephan Schmitt wrote: > > > Eric, did you know that Carsten provided a function called > > > org-table-to-lisp in org-6.06b? I think with this you can > > > refactor your code to be more modular and thus better > > > maintainable and extensible. > > I have switched over to using `org-table-to-lisp' for all table > manipulation, and (at least in my environment), it seems to have made > the graphing functions faster, and much more reliable (no longer do I > have to run a function twice to generate a graph). > > I believe this should fix most of the bugs mentioned previously. > > Also, I have finished support for 3d graphing. The updated version is > up on my git repo at > > http://github.com/eschulte/org-plot/tree/master > > or > > git clone git://github.com/eschulte/org-plot.git > > Of course if anyone has any comments, problems, or suggestions please > let me know. > > Thanks -- Eric > ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: org-plot (generating graphs from org-mode) 2008-08-27 9:30 ` Sebastian Rose @ 2008-08-27 15:02 ` Eric Schulte 0 siblings, 0 replies; 15+ messages in thread From: Eric Schulte @ 2008-08-27 15:02 UTC (permalink / raw) To: sebastian_rose; +Cc: emacs-orgmode On Wednesday, August 27, at 11:30, Sebastian Rose wrote: > Hi Eric, > > > Great! This version fixes ALL the bugs I mentioned in my previous > email on emacs 23 !!! > Wonderful!! thanks for testing this out. -- schulte ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: org-plot (generating graphs from org-mode) 2008-08-26 23:09 ` org-plot (generating graphs from org-mode) Eric Schulte 2008-08-27 9:30 ` Sebastian Rose @ 2008-08-27 9:32 ` Sebastian Rose 2008-08-29 11:16 ` William Henney 2 siblings, 0 replies; 15+ messages in thread From: Sebastian Rose @ 2008-08-27 9:32 UTC (permalink / raw) To: emacs-orgmode Hi again, Forgot to say: buffer-modified-p problem is gone too!!! Woweeee! Eric Schulte wrote: > On Tuesday, August 26, at 11:08, Eric Schulte wrote: > > On Tuesday, August 26, at 19:57, Stephan Schmitt wrote: > > > Eric, did you know that Carsten provided a function called > > > org-table-to-lisp in org-6.06b? I think with this you can > > > refactor your code to be more modular and thus better > > > maintainable and extensible. > > I have switched over to using `org-table-to-lisp' for all table > manipulation, and (at least in my environment), it seems to have made > the graphing functions faster, and much more reliable (no longer do I > have to run a function twice to generate a graph). > > I believe this should fix most of the bugs mentioned previously. > > Also, I have finished support for 3d graphing. The updated version is > up on my git repo at > > http://github.com/eschulte/org-plot/tree/master > > or > > git clone git://github.com/eschulte/org-plot.git > > Of course if anyone has any comments, problems, or suggestions please > let me know. > > Thanks -- Eric > ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: org-plot (generating graphs from org-mode) 2008-08-26 23:09 ` org-plot (generating graphs from org-mode) Eric Schulte 2008-08-27 9:30 ` Sebastian Rose 2008-08-27 9:32 ` Sebastian Rose @ 2008-08-29 11:16 ` William Henney 2008-08-31 18:14 ` Eric Schulte 2008-09-01 0:52 ` Eric Schulte 2 siblings, 2 replies; 15+ messages in thread From: William Henney @ 2008-08-29 11:16 UTC (permalink / raw) To: Eric Schulte; +Cc: emacs-orgmode Hi Eric On Tue, Aug 26, 2008 at 6:09 PM, Eric Schulte <schulte.eric@gmail.com> wrote: > Of course if anyone has any comments, problems, or suggestions please > let me know. Org-plot is great! Thank you very much for writing this. I just found a couple of small problems, as detailed below. Cheers Will ** Bugs in org-plot *** [2008-08-28 Thu] Finding the table to plot =org-plot/goto-nearest-table= searches backward first, which means that if point is located in an options line for a following table, then it will find the previous table instead. This is usually undesired. *** [2008-08-28 Thu] Columns with multi-word text Consider the following table: #+PLOT: title:"Citas" ind:0 deps:(3) type:2d with:histograms set:"yrange [0:]" | Sede | Max cites | H-index | |-----------+-----------+---------| | Chile | 257.72 | 21.39 | | Leeds | 165.77 | 19.68 | | São Paolo | 71.00 | 11.50 | | Stockholm | 134.19 | 14.33 | | Morelia | 257.56 | 17.67 | In theory, this should plot the third column. However, the data point for São Paolo comes from the second column instead. Presumably this is because of the embedded space in "Sõo Paolo". If I replace it with a unicode non-breaking space, "São Paolo", then it works correctly. -- Dr William Henney, Centro de Radioastronomía y Astrofísica, Universidad Nacional Autónoma de México, Campus Morelia ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: org-plot (generating graphs from org-mode) 2008-08-29 11:16 ` William Henney @ 2008-08-31 18:14 ` Eric Schulte 2008-09-03 3:25 ` William Henney 2008-09-01 0:52 ` Eric Schulte 1 sibling, 1 reply; 15+ messages in thread From: Eric Schulte @ 2008-08-31 18:14 UTC (permalink / raw) To: William Henney; +Cc: emacs-orgmode Thanks for the feedback, much appreciated. A new version of org-plot is up on the git repo http://github.com/eschulte/org-plot/tree/master detailed comments below... "William Henney" <whenney@gmail.com> writes: > *** [2008-08-28 Thu] Finding the table to plot > =org-plot/goto-nearest-table= searches backward first, which means > that if point is located in an options line for a following table, > then it will find the previous table instead. This is usually > undesired. I changed this so it no longer looks backwards > *** [2008-08-28 Thu] Columns with multi-word text > Consider the following table: > > #+PLOT: title:"Citas" ind:0 deps:(3) type:2d with:histograms set:"yrange [0:]" > | Sede | Max cites | H-index | > |-----------+-----------+---------| > | Chile | 257.72 | 21.39 | > | Leeds | 165.77 | 19.68 | > | São Paolo | 71.00 | 11.50 | > | Stockholm | 134.19 | 14.33 | > | Morelia | 257.56 | 17.67 | > > In theory, this should plot the third column. However, the data > point for São Paolo comes from the second column > instead. Presumably this is because of the embedded space in "Sõo > Paolo". If I replace it with a unicode non-breaking space, > "São Paolo", then it works correctly. you're right, I am now quoting non-text columns on export which takes care of the problem you mentioned here. Also, org-plot is now using to gnuplot `xticlabel' command to use the ind columns values as labels in the case that they are text. (for an example plot your table from above with the ind:1 option). If you don't mind, I would like to add the table you sent above to the example.org file in org-plot to demonstrate this feature. Thanks -- Eric ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: org-plot (generating graphs from org-mode) 2008-08-31 18:14 ` Eric Schulte @ 2008-09-03 3:25 ` William Henney 0 siblings, 0 replies; 15+ messages in thread From: William Henney @ 2008-09-03 3:25 UTC (permalink / raw) To: Eric Schulte; +Cc: emacs-orgmode Hi Eric On Sun, Aug 31, 2008 at 1:14 PM, Eric Schulte <schulte.eric@gmail.com> wrote: > > Thanks for the feedback, much appreciated. A new version of org-plot is > up on the git repo http://github.com/eschulte/org-plot/tree/master > I can confirm that the new version fixes both the problems that I reported. Furthermore, the new option to use a column of text labels for the x-axis is wonderful. Thanks! > If you don't mind, I would like to add the > table you sent above to the example.org file in org-plot to demonstrate > this feature. > Yes, by all means, go ahead. I've run into a couple more minor problems that might be worth looking into if you have the time. **** Writing plot to file Two issues here: 1. The suffix of the output file must exactly match the name of a gnuplot terminal type. Thus file:"foo.jpeg" works, but file:"foo.jpg" doesn't. Similarly, one needs to use ".postscript" instead of ".ps". 2. Some terminals seem to work, but some don't (there is no error message and the ouput file is created, but it is empty): - Works :: jpeg, png, svg, postscript, mp - Fails :: pdf (OK, this seems to be the only one - weird) **** Non-ascii characters in strings These tend not to work. However, the results vary according to the output terminal in use, so I suspect that this may be due to bugs in gnuplot. My version is : G N U P L O T: : Version 4.2 patchlevel 3 : last modified Mar 2008 : System: Darwin 9.4.0 One strange thing is that, even if the .org file is utf8, the graphics file seems to get written as latin-1. Cheers Will -- Dr William Henney, Centro de Radioastronomía y Astrofísica, Universidad Nacional Autónoma de México, Campus Morelia ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: org-plot (generating graphs from org-mode) 2008-08-29 11:16 ` William Henney 2008-08-31 18:14 ` Eric Schulte @ 2008-09-01 0:52 ` Eric Schulte 2008-09-01 19:45 ` Seweryn Kokot 1 sibling, 1 reply; 15+ messages in thread From: Eric Schulte @ 2008-09-01 0:52 UTC (permalink / raw) To: William Henney; +Cc: emacs-orgmode Thanks for the feedback, much appreciated. A new version of org-plot is up on the git repo http://github.com/eschulte/org-plot/tree/master detailed comments below... "William Henney" <whenney@gmail.com> writes: > *** [2008-08-28 Thu] Finding the table to plot > =org-plot/goto-nearest-table= searches backward first, which means > that if point is located in an options line for a following table, > then it will find the previous table instead. This is usually > undesired. I changed this so it no longer looks backwards > *** [2008-08-28 Thu] Columns with multi-word text > Consider the following table: > > #+PLOT: title:"Citas" ind:0 deps:(3) type:2d with:histograms set:"yrange [0:]" > | Sede | Max cites | H-index | > |-----------+-----------+---------| > | Chile | 257.72 | 21.39 | > | Leeds | 165.77 | 19.68 | > | São Paolo | 71.00 | 11.50 | > | Stockholm | 134.19 | 14.33 | > | Morelia | 257.56 | 17.67 | > > In theory, this should plot the third column. However, the data > point for São Paolo comes from the second column > instead. Presumably this is because of the embedded space in "Sõo > Paolo". If I replace it with a unicode non-breaking space, > "São Paolo", then it works correctly. you're right, I am now quoting non-text columns on export which takes care of the problem you mentioned here. Also, org-plot is now using to gnuplot `xticlabel' command to use the `ind' column's values as labels in the case that they are text. (to demonstrate, plot your table from above with the ind:1 option). If you don't mind, I would like to add the table you sent above to the example.org file in org-plot to demonstrate this feature. Thanks -- Eric ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: org-plot (generating graphs from org-mode) 2008-09-01 0:52 ` Eric Schulte @ 2008-09-01 19:45 ` Seweryn Kokot 2008-09-01 20:17 ` Eric Schulte 0 siblings, 1 reply; 15+ messages in thread From: Seweryn Kokot @ 2008-09-01 19:45 UTC (permalink / raw) To: emacs-orgmode Hi Eric, I just want to ask if it is necessary to redefine 'debug' function in org-plot.el? Because when I put the following lines into .emacs file: (require 'org-plot) (add-hook 'org-mode-hook (lambda () (local-set-key (kbd "\M-\C-g") 'org-plot/gnuplot))) whenever I invoke an error, instead of getting *Backtrace* buffer I get a strange message in the echo line. -- regards, Seweryn Kokot ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: Re: org-plot (generating graphs from org-mode) 2008-09-01 19:45 ` Seweryn Kokot @ 2008-09-01 20:17 ` Eric Schulte 0 siblings, 0 replies; 15+ messages in thread From: Eric Schulte @ 2008-09-01 20:17 UTC (permalink / raw) To: Seweryn Kokot; +Cc: emacs-orgmode oh, not at all, I was using it for convenience during my own debugging, and didn't realize I was overwriting an existing function. Please feel free to remove the `debug' definition from org-plot.el (I will remove it from the version in my git repo right now). Thanks -- Eric ^ permalink raw reply [flat|nested] 15+ messages in thread
* org-plot (generating graphs from org-mode) @ 2008-08-26 1:53 Eric Schulte 2008-09-02 18:08 ` Thomas Baumann 0 siblings, 1 reply; 15+ messages in thread From: Eric Schulte @ 2008-08-26 1:53 UTC (permalink / raw) To: Org-mode Hi, org-plot enables generation of graphs from data stored in org tables (maybe eventually elsewhere in org files). It is available on github at http://github.com/eschulte/org-plot/tree/master or with git clone git://github.com/eschulte/org-plot.git Included with org-plot.el is an example.org file which should quickly show off it's features, options and abilities. While this is not completed, it is functional, and I figure better to get early feedback then wait until it's all polished. Please give it a look and let me know what you think. Thanks -- Eric ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: org-plot (generating graphs from org-mode) 2008-08-26 1:53 Eric Schulte @ 2008-09-02 18:08 ` Thomas Baumann 2008-09-02 21:26 ` JBash 0 siblings, 1 reply; 15+ messages in thread From: Thomas Baumann @ 2008-09-02 18:08 UTC (permalink / raw) To: emacs-orgmode Awesome, thanks. Thomas ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: Re: org-plot (generating graphs from org-mode) 2008-09-02 18:08 ` Thomas Baumann @ 2008-09-02 21:26 ` JBash 2008-09-03 7:03 ` Carsten Dominik 0 siblings, 1 reply; 15+ messages in thread From: JBash @ 2008-09-02 21:26 UTC (permalink / raw) To: emacs-orgmode [-- Attachment #1.1: Type: text/plain, Size: 1151 bytes --] In trying the example, I'm getting a message saying a function definition (org-table-to-lisp) is void. I've been using org-mode for a few months, but I'm not at all familiar with lisp. I just today pulled the files (org-plot.el and example.org) from http://github.com/eschulte/org-plot/tree/master. Can someone help? Thanks, Jerry Using emacs 22.2.1; gnuplot 4.2 patchlevel 2; debian lenny OVERVIEW CHILDREN Loading /home/jlb/dl1/eschulte-org-plot-e30c71abadada20558d11610943c3d8f42fc4258/org-plot.el (source)...done (progn (add-to-list 'load-path "./") (load "org-plot.el")) => t (local-set-key "\M-\C-g" 'org-plot/gnuplot) => org-plot/gnuplot Loading /home/jlb/emacs/org-mode/lisp/org-table.el (source)...done let*: Symbol's function definition is void: org-table-to-lisp [8 times] call-interactively: End of buffer On Tue, Sep 2, 2008 at 2:08 PM, Thomas Baumann <dtbaumann@yahoo.de> wrote: > Awesome, thanks. > > Thomas > > > > _______________________________________________ > Emacs-orgmode mailing list > Remember: use `Reply All' to send replies to the list. > Emacs-orgmode@gnu.org > http://lists.gnu.org/mailman/listinfo/emacs-orgmode > [-- Attachment #1.2: Type: text/html, Size: 1878 bytes --] [-- Attachment #2: Type: text/plain, Size: 204 bytes --] _______________________________________________ Emacs-orgmode mailing list Remember: use `Reply All' to send replies to the list. Emacs-orgmode@gnu.org http://lists.gnu.org/mailman/listinfo/emacs-orgmode ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: Re: org-plot (generating graphs from org-mode) 2008-09-02 21:26 ` JBash @ 2008-09-03 7:03 ` Carsten Dominik 2008-09-03 14:26 ` Eric Schulte 0 siblings, 1 reply; 15+ messages in thread From: Carsten Dominik @ 2008-09-03 7:03 UTC (permalink / raw) To: JBash; +Cc: emacs-orgmode [-- Attachment #1.1: Type: text/plain, Size: 1531 bytes --] On Sep 2, 2008, at 11:26 PM, JBash wrote: > In trying the example, I'm getting a message saying a function > definition (org-table-to-lisp) is void. > I've been using org-mode for a few months, but I'm not at all > familiar with lisp. > I just today pulled the files (org-plot.el and example.org) from http://github.com/eschulte/org-plot/tree/master > . > Can someone help? org-plot.el needs to do (require 'org-table) - Carsten > > > Thanks, > Jerry > > Using emacs 22.2.1; gnuplot 4.2 patchlevel 2; debian lenny > > OVERVIEW > CHILDREN > Loading /home/jlb/dl1/eschulte-org-plot- > e30c71abadada20558d11610943c3d8f42fc4258/org-plot.el (source)...done > (progn (add-to-list 'load-path "./") (load "org-plot.el")) => t > (local-set-key "\M-\C-g" 'org-plot/gnuplot) => org-plot/gnuplot > Loading /home/jlb/emacs/org-mode/lisp/org-table.el (source)...done > let*: Symbol's function definition is void: org-table-to-lisp [8 > times] > call-interactively: End of buffer > > > On Tue, Sep 2, 2008 at 2:08 PM, Thomas Baumann <dtbaumann@yahoo.de> > wrote: > Awesome, thanks. > > Thomas > > > > _______________________________________________ > Emacs-orgmode mailing list > Remember: use `Reply All' to send replies to the list. > Emacs-orgmode@gnu.org > http://lists.gnu.org/mailman/listinfo/emacs-orgmode > > _______________________________________________ > Emacs-orgmode mailing list > Remember: use `Reply All' to send replies to the list. > Emacs-orgmode@gnu.org > http://lists.gnu.org/mailman/listinfo/emacs-orgmode [-- Attachment #1.2: Type: text/html, Size: 2590 bytes --] [-- Attachment #2: Type: text/plain, Size: 204 bytes --] _______________________________________________ Emacs-orgmode mailing list Remember: use `Reply All' to send replies to the list. Emacs-orgmode@gnu.org http://lists.gnu.org/mailman/listinfo/emacs-orgmode ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: Re: org-plot (generating graphs from org-mode) 2008-09-03 7:03 ` Carsten Dominik @ 2008-09-03 14:26 ` Eric Schulte 0 siblings, 0 replies; 15+ messages in thread From: Eric Schulte @ 2008-09-03 14:26 UTC (permalink / raw) To: Carsten Dominik; +Cc: emacs-orgmode Carsten Dominik <dominik@science.uva.nl> writes: > > org-plot.el needs to do (require 'org-table) > Thanks, I applied this change to the git repo ^ permalink raw reply [flat|nested] 15+ messages in thread
end of thread, other threads:[~2008-09-03 14:26 UTC | newest]
Thread overview: 15+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <20080826151404.0996C2179B@mailhost.cs.tu-berlin.de>
2008-08-26 17:57 ` Emacs-orgmode Digest, Vol 30, Issue 39 Stephan Schmitt
2008-08-26 18:08 ` Eric Schulte
2008-08-26 23:09 ` org-plot (generating graphs from org-mode) Eric Schulte
2008-08-27 9:30 ` Sebastian Rose
2008-08-27 15:02 ` Eric Schulte
2008-08-27 9:32 ` Sebastian Rose
2008-08-29 11:16 ` William Henney
2008-08-31 18:14 ` Eric Schulte
2008-09-03 3:25 ` William Henney
2008-09-01 0:52 ` Eric Schulte
2008-09-01 19:45 ` Seweryn Kokot
2008-09-01 20:17 ` Eric Schulte
2008-08-26 1:53 Eric Schulte
2008-09-02 18:08 ` Thomas Baumann
2008-09-02 21:26 ` JBash
2008-09-03 7:03 ` Carsten Dominik
2008-09-03 14:26 ` Eric Schulte
Code repositories for project(s) associated with this public inbox https://git.savannah.gnu.org/cgit/emacs/org-mode.git This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).