* omitting done TODOs from custom agenda @ 2010-09-13 9:52 Eric Abrahamsen 2010-09-13 18:42 ` Matt Lundin 0 siblings, 1 reply; 6+ messages in thread From: Eric Abrahamsen @ 2010-09-13 9:52 UTC (permalink / raw) To: emacs-orgmode I'm having a bit of confusion: I've created my own TODO sequences with org-todo-keywords, in this case (sequence "CONTACT(n)" "REPLY(r)" "|" "CONTACTED(e@)"). Then I've got a custom agenda defined using org-agenda-custom-commands, where there's a weekly view on top and some TODO items below. When I start this agenda view, and mark one of the TODO items as CONTACTED, it doesn't disappear from the agenda view. It's very clearly marked as done in the original org file, but it stays in agenda. I've looked at all the extra variables for a custom agenda command, and there doesn't seem to be one that say "don't show completed items". These items are part of a tag-todo statment, where the selecting regexp is a tag, not a particular todo keyword, so I wouldn't think I've done anything to force it to display these todo keywords. Any advice on this? I'm running Org-mode version 7.01trans (release_7.01h.493.gece2), on Emacs 24. Any advice appreciated! Eric ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: omitting done TODOs from custom agenda 2010-09-13 9:52 omitting done TODOs from custom agenda Eric Abrahamsen @ 2010-09-13 18:42 ` Matt Lundin 2010-09-14 0:54 ` Eric Abrahamsen 2010-09-14 5:07 ` Eric Abrahamsen 0 siblings, 2 replies; 6+ messages in thread From: Matt Lundin @ 2010-09-13 18:42 UTC (permalink / raw) To: Eric Abrahamsen; +Cc: emacs-orgmode Eric Abrahamsen <eric@ericabrahamsen.net> writes: > I'm having a bit of confusion: I've created my own TODO sequences with > org-todo-keywords, in this case (sequence "CONTACT(n)" "REPLY(r)" "|" > "CONTACTED(e@)"). Then I've got a custom agenda defined using > org-agenda-custom-commands, where there's a weekly view on top and some > TODO items below. When I start this agenda view, and mark one of the > TODO items as CONTACTED, it doesn't disappear from the agenda view. It's > very clearly marked as done in the original org file, but it stays in > agenda. I've looked at all the extra variables for a custom agenda > command, and there doesn't seem to be one that say "don't show completed > items". A simple question: Are you refreshing the agenda after marking the item done (i.e., CONTACTED)? Similarly, do the inactive items (i.e., CONTACTED) remain when you invoke the agenda view the again. Inactive todos do not disappear from the agenda until it is refreshed (r). > These items are part of a tag-todo statment, where the selecting regexp > is a tag, not a particular todo keyword, so I wouldn't think I've done > anything to force it to display these todo keywords. Would you mind sharing your custom agenda command? Best, Matt ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: omitting done TODOs from custom agenda 2010-09-13 18:42 ` Matt Lundin @ 2010-09-14 0:54 ` Eric Abrahamsen 2010-09-15 5:07 ` Eric Abrahamsen 2010-09-14 5:07 ` Eric Abrahamsen 1 sibling, 1 reply; 6+ messages in thread From: Eric Abrahamsen @ 2010-09-14 0:54 UTC (permalink / raw) To: Matt Lundin; +Cc: emacs-orgmode On Tue, Sep 14 2010, Matt Lundin wrote: > Eric Abrahamsen <eric@ericabrahamsen.net> writes: > >> I'm having a bit of confusion: I've created my own TODO sequences with >> org-todo-keywords, in this case (sequence "CONTACT(n)" "REPLY(r)" "|" >> "CONTACTED(e@)"). Then I've got a custom agenda defined using >> org-agenda-custom-commands, where there's a weekly view on top and some >> TODO items below. When I start this agenda view, and mark one of the >> TODO items as CONTACTED, it doesn't disappear from the agenda view. It's >> very clearly marked as done in the original org file, but it stays in >> agenda. I've looked at all the extra variables for a custom agenda >> command, and there doesn't seem to be one that say "don't show completed >> items". > > A simple question: Are you refreshing the agenda after marking the item > done (i.e., CONTACTED)? Similarly, do the inactive items (i.e., > CONTACTED) remain when you invoke the agenda view the again. > > Inactive todos do not disappear from the agenda until it is refreshed > (r). Hi Matt, Yup, I am refreshing the agenda with r, or usually g. In the agenda, when I first mark the item as done, the text of the heading turns green, but when I next refresh, the text turns back to black. These completed todos are still there even if I close the agenda and re-invoke it. > >> These items are part of a tag-todo statment, where the selecting regexp >> is a tag, not a particular todo keyword, so I wouldn't think I've done >> anything to force it to display these todo keywords. > > Would you mind sharing your custom agenda command? Of course: '(org-agenda-custom-commands (quote (("c" "Agenda plus contacts" ((agenda "" nil) (tags-todo "TODO=\"CONTACT\"" nil) (tags-todo "TODO=\"REPLY\"" nil)) nil nil) ("g" "Get It Louder" ((agenda "" nil) (tags-todo "Gil" nil)) nil)))) The problem occurs in both my "Agenda plus contacts" and "Get It Louder", so maybe it's something with my custom todos? (org-todo-keywords (quote ((sequence "TODO(t)" "WAITING(w@)" "|" "DONE(d)" "CANCELLED(c@)") (sequence "CONTACT(n)" "REPLY(r)" "|" "CONTACTED(e@)")))) But I don't see how that could be interpreted as anything but CONTACTED = done... Thanks! > > Best, > Matt ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: omitting done TODOs from custom agenda 2010-09-14 0:54 ` Eric Abrahamsen @ 2010-09-15 5:07 ` Eric Abrahamsen 2010-09-16 4:42 ` Matt Lundin 0 siblings, 1 reply; 6+ messages in thread From: Eric Abrahamsen @ 2010-09-15 5:07 UTC (permalink / raw) To: emacs-orgmode On Tue, Sep 14 2010, Eric Abrahamsen wrote: > On Tue, Sep 14 2010, Matt Lundin wrote: > >> Eric Abrahamsen <eric@ericabrahamsen.net> writes: >> >>> I'm having a bit of confusion: I've created my own TODO sequences with >>> org-todo-keywords, in this case (sequence "CONTACT(n)" "REPLY(r)" "|" >>> "CONTACTED(e@)"). Then I've got a custom agenda defined using >>> org-agenda-custom-commands, where there's a weekly view on top and some >>> TODO items below. When I start this agenda view, and mark one of the >>> TODO items as CONTACTED, it doesn't disappear from the agenda view. It's >>> very clearly marked as done in the original org file, but it stays in >>> agenda. I've looked at all the extra variables for a custom agenda >>> command, and there doesn't seem to be one that say "don't show completed >>> items". >> >> A simple question: Are you refreshing the agenda after marking the item >> done (i.e., CONTACTED)? Similarly, do the inactive items (i.e., >> CONTACTED) remain when you invoke the agenda view the again. >> >> Inactive todos do not disappear from the agenda until it is refreshed >> (r). > > Hi Matt, > > Yup, I am refreshing the agenda with r, or usually g. In the agenda, > when I first mark the item as done, the text of the heading turns green, > but when I next refresh, the text turns back to black. These completed > todos are still there even if I close the agenda and re-invoke it. > >> >>> These items are part of a tag-todo statment, where the selecting regexp >>> is a tag, not a particular todo keyword, so I wouldn't think I've done >>> anything to force it to display these todo keywords. >> >> Would you mind sharing your custom agenda command? > > Of course: > > '(org-agenda-custom-commands (quote (("c" "Agenda plus contacts" > ((agenda "" nil) (tags-todo "TODO=\"CONTACT\"" nil) (tags-todo > "TODO=\"REPLY\"" nil)) nil nil) ("g" "Get It Louder" ((agenda "" nil) > (tags-todo "Gil" nil)) nil)))) > > The problem occurs in both my "Agenda plus contacts" and "Get It > Louder", so maybe it's something with my custom todos? > > (org-todo-keywords (quote ((sequence "TODO(t)" "WAITING(w@)" "|" > "DONE(d)" "CANCELLED(c@)") (sequence "CONTACT(n)" "REPLY(r)" "|" > "CONTACTED(e@)")))) Looks like the problem here was that CONTACT is a substring of CONTACTED—whatever function decides if a todo keyword is pending or completed apparently just reads the string until it finds the first match (?). I changed it to SENT and everything worked fine. Dunno if that's worth considering a bug, but it's certainly surprising behavior. E > > But I don't see how that could be interpreted as anything but CONTACTED > = done... > > Thanks! > >> >> Best, >> Matt > > _______________________________________________ > Emacs-orgmode mailing list > Please use `Reply All' to send replies to the list. > Emacs-orgmode@gnu.org > http://lists.gnu.org/mailman/listinfo/emacs-orgmode ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: omitting done TODOs from custom agenda 2010-09-15 5:07 ` Eric Abrahamsen @ 2010-09-16 4:42 ` Matt Lundin 0 siblings, 0 replies; 6+ messages in thread From: Matt Lundin @ 2010-09-16 4:42 UTC (permalink / raw) To: Eric Abrahamsen; +Cc: emacs-orgmode Eric Abrahamsen <eric@ericabrahamsen.net> writes: > On Tue, Sep 14 2010, Eric Abrahamsen wrote: > >> On Tue, Sep 14 2010, Matt Lundin wrote: >> >>> Eric Abrahamsen <eric@ericabrahamsen.net> writes: >>> >>>> I'm having a bit of confusion: I've created my own TODO sequences with >>>> org-todo-keywords, in this case (sequence "CONTACT(n)" "REPLY(r)" "|" >>>> "CONTACTED(e@)"). Then I've got a custom agenda defined using >>>> org-agenda-custom-commands, where there's a weekly view on top and some >>>> TODO items below. When I start this agenda view, and mark one of the >>>> TODO items as CONTACTED, it doesn't disappear from the agenda view. It's >>>> very clearly marked as done in the original org file, but it stays in >>>> agenda. I've looked at all the extra variables for a custom agenda >>>> command, and there doesn't seem to be one that say "don't show completed >>>> items". >>> >>> Would you mind sharing your custom agenda command? >> >> '(org-agenda-custom-commands (quote (("c" "Agenda plus contacts" >> ((agenda "" nil) (tags-todo "TODO=\"CONTACT\"" nil) (tags-todo >> "TODO=\"REPLY\"" nil)) nil nil) ("g" "Get It Louder" ((agenda "" nil) >> (tags-todo "Gil" nil)) nil)))) > > Looks like the problem here was that CONTACT is a substring of > CONTACTED—whatever function decides if a todo keyword is pending or > completed apparently just reads the string until it finds the first > match (?). I changed it to SENT and everything worked fine. Dunno if > that's worth considering a bug, but it's certainly surprising behavior. I'd agree. The tags-todo search does seem to search for all instances of the substring (CONTACT) rather than the word alone. This seems to be inconsistent with the behavior of the tags match. E.g., in the following sample: --8<---------------cut here---------------start------------->8--- ** Testing *** CONTACT Call so and so *** CONTACTED Call Mr. Potato Head *** TODO The quick brown fox :comp: *** DONE jumped over the lazy dog :computer: --8<---------------cut here---------------end--------------->8--- C-c a M "comp" pulls up only "The quick brown fox," whereas C-c a M TODO="CONTACT" or C-c a M /CONTACT pull up both todos containing that substring. For the time being, have you considered using the todo search instead of tags-todo? That works correctly on my machine. E.g., --8<---------------cut here---------------start------------->8--- (setq org-agenda-custom-commands '(("c" "Agenda plus contacts" ((agenda "") (todo "CONTACT") (todo "REPLY"))))) --8<---------------cut here---------------end--------------->8--- Best, Matt ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: omitting done TODOs from custom agenda 2010-09-13 18:42 ` Matt Lundin 2010-09-14 0:54 ` Eric Abrahamsen @ 2010-09-14 5:07 ` Eric Abrahamsen 1 sibling, 0 replies; 6+ messages in thread From: Eric Abrahamsen @ 2010-09-14 5:07 UTC (permalink / raw) To: Matt Lundin; +Cc: emacs-orgmode On Tue, Sep 14 2010, Matt Lundin wrote: > Eric Abrahamsen <eric@ericabrahamsen.net> writes: > >> I'm having a bit of confusion: I've created my own TODO sequences with >> org-todo-keywords, in this case (sequence "CONTACT(n)" "REPLY(r)" "|" >> "CONTACTED(e@)"). Then I've got a custom agenda defined using >> org-agenda-custom-commands, where there's a weekly view on top and some >> TODO items below. When I start this agenda view, and mark one of the >> TODO items as CONTACTED, it doesn't disappear from the agenda view. It's >> very clearly marked as done in the original org file, but it stays in >> agenda. I've looked at all the extra variables for a custom agenda >> command, and there doesn't seem to be one that say "don't show completed >> items". > > A simple question: Are you refreshing the agenda after marking the item > done (i.e., CONTACTED)? Similarly, do the inactive items (i.e., > CONTACTED) remain when you invoke the agenda view the again. > > Inactive todos do not disappear from the agenda until it is refreshed > (r). I should add that the regular todo series still works properly, (TODO --> DONE gets removed from the agenda), so it must be something to do with my custom todo keywords... > >> These items are part of a tag-todo statment, where the selecting regexp >> is a tag, not a particular todo keyword, so I wouldn't think I've done >> anything to force it to display these todo keywords. > > Would you mind sharing your custom agenda command? > > Best, > Matt ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2010-09-16 4:42 UTC | newest] Thread overview: 6+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2010-09-13 9:52 omitting done TODOs from custom agenda Eric Abrahamsen 2010-09-13 18:42 ` Matt Lundin 2010-09-14 0:54 ` Eric Abrahamsen 2010-09-15 5:07 ` Eric Abrahamsen 2010-09-16 4:42 ` Matt Lundin 2010-09-14 5:07 ` Eric Abrahamsen
Code repositories for project(s) associated with this public inbox https://git.savannah.gnu.org/cgit/emacs/org-mode.git This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).