From: Christian Moe <mail@christianmoe.com>
To: Org Mode <emacs-orgmode@gnu.org>
Subject: Re: [ANN] BREAKING CHANGE -- removing #+BABEL file-wide property lines
Date: Fri, 21 Oct 2011 13:17:30 +0200 [thread overview]
Message-ID: <4EA154CA.4020003@christianmoe.com> (raw)
In-Reply-To: <CAGhLh6HYrFN6PFTnBza90QHp7AWEcH+OiWas_ZDJhauDAFtXxQ@mail.gmail.com>
On 10/21/11 12:59 PM, Rainer M Krug wrote:
> So, using your above mentioned example, after the first PROPERTY line,
> euro=1.3795 and SALESTAX not set, while after the second one
> salestax=.15, and euro is unset? That would be quite bad.
That's what I'd expected, but actually, euro is set and salestax is
not. Apparently subsequent PROPERTY lines are ignored if they try to
set an already existing property.
> To clarify: before, we could use #+BABEL and #PROPERTY to do similar
> things. Now the whole #+BABEL has been removed, and only the
> functionality from #+PROPERTY is left - correct?
That's my understanding. And #+PROPERTY offers equivalent
functionality in almost every way, but not, as far as I can
understand, in this corner case.
Christian
next prev parent reply other threads:[~2011-10-21 11:14 UTC|newest]
Thread overview: 132+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-10-20 19:43 [ANN] BREAKING CHANGE -- removing #+BABEL file-wide property lines Eric Schulte
2011-10-20 20:06 ` Nick Dokos
2011-10-20 20:12 ` Eric Schulte
2011-10-20 20:51 ` Nick Dokos
2011-10-20 21:04 ` Sebastien Vauban
2011-10-20 21:50 ` [RFC] Standardized code block keywords Eric Schulte
2011-10-21 1:52 ` Thomas S. Dye
2011-10-21 2:57 ` Nick Dokos
2011-10-21 7:26 ` Christian Moe
2011-10-21 16:12 ` Eric Schulte
2011-10-21 19:10 ` Thomas S. Dye
2011-10-23 12:20 ` Daniel Bausch
2011-10-23 16:09 ` Thomas S. Dye
2011-10-24 5:49 ` Daniel Bausch
2011-10-21 8:17 ` Sebastien Vauban
2011-10-21 16:17 ` Eric Schulte
2011-10-21 17:37 ` Sebastien Vauban
[not found] ` <CAGhLh6GXg6nMZ-xdu-EP=YRx7Pznrme2Yq1S0vdc6Yq0tPMxFg@mail.gmail.com>
2011-10-25 6:59 ` Rainer M Krug
2011-10-21 16:08 ` Eric Schulte
2011-10-21 16:05 ` Eric Schulte
2011-10-21 18:02 ` Thomas S. Dye
2011-10-22 15:19 ` Eric Schulte
2011-10-21 7:43 ` Torsten Wagner
2011-10-21 8:27 ` Sebastien Vauban
2011-10-21 16:25 ` Eric Schulte
2011-10-21 16:24 ` Eric Schulte
2011-10-21 17:41 ` Sebastien Vauban
2011-10-24 1:06 ` Torsten Wagner
2011-10-25 6:44 ` Rainer M Krug
2011-10-25 7:24 ` Jambunathan K
2011-10-25 8:21 ` Sebastien Vauban
2011-10-21 12:22 ` Nicolas Goaziou
2011-10-21 16:27 ` Eric Schulte
2011-10-21 17:48 ` Eric Schulte
2011-10-21 19:24 ` Viktor Rosenfeld
2011-10-23 12:42 ` Daniel Bausch
2011-10-24 7:37 ` Eric S Fraga
2011-10-24 14:39 ` Darlan Cavalcante Moreira
2011-10-24 7:47 ` Sebastien Vauban
2011-10-25 1:30 ` Eric Schulte
2011-10-25 7:14 ` Daniel Bausch
2011-10-25 8:14 ` Sebastien Vauban
2011-10-25 14:44 ` Eric Schulte
2011-10-25 15:38 ` Christian Moe
2011-10-25 15:42 ` Nick Dokos
2011-10-25 16:28 ` Martyn Jago
2011-10-25 16:49 ` Eric Schulte
2011-10-25 17:21 ` Nick Dokos
2011-10-26 5:58 ` Daniel Bausch
2011-10-26 13:10 ` Giovanni Ridolfi
2011-10-26 14:41 ` Daniel Bausch
2011-10-26 15:04 ` Nick Dokos
2011-10-27 5:25 ` Daniel Bausch
2011-10-28 16:49 ` Eric Schulte
2011-10-28 18:31 ` Eric Schulte
2011-10-28 18:40 ` Nick Dokos
2011-10-28 18:52 ` Eric Schulte
2011-10-28 23:22 ` Nick Dokos
2011-10-28 23:39 ` Thomas S. Dye
2011-10-29 2:18 ` Nick Dokos
2011-10-31 7:25 ` Daniel Bausch
2011-10-31 19:01 ` Eric Schulte
2011-11-01 6:34 ` C-c C-c not working at end of #+end_src line (was: [RFC] Standardized code block keywords) Daniel Bausch
2011-10-25 14:17 ` [RFC] Standardized code block keywords Eric Schulte
2011-10-26 5:41 ` Daniel Bausch
2011-10-26 6:17 ` Thomas S. Dye
2011-10-26 12:16 ` Eric Schulte
2011-10-21 18:14 ` Thorsten
2011-10-20 21:34 ` [ANN] BREAKING CHANGE -- removing #+BABEL file-wide property lines Eric Schulte
2011-10-20 21:44 ` suvayu ali
2011-10-20 21:52 ` Eric Schulte
2011-10-20 22:23 ` Suvayu Ali
2011-10-20 21:47 ` Sebastien Vauban
2011-10-20 21:54 ` Eric Schulte
2011-10-20 21:57 ` Nick Dokos
2011-10-20 21:48 ` Nick Dokos
2011-10-20 21:57 ` Eric Schulte
2011-10-20 22:08 ` Nick Dokos
2011-10-20 22:18 ` Eric Schulte
2011-10-21 7:28 ` Sebastien Vauban
2011-10-21 8:14 ` Christian Moe
2011-10-21 9:12 ` Rainer M Krug
2011-10-21 10:47 ` Christian Moe
2011-10-21 10:59 ` Rainer M Krug
2011-10-21 11:17 ` Christian Moe [this message]
2011-10-21 11:18 ` Rainer M Krug
2011-10-21 17:37 ` Eric Schulte
2011-10-21 18:09 ` Nick Dokos
2011-10-22 15:25 ` Eric Schulte
2011-10-21 18:35 ` Rainer M Krug
2011-10-21 18:40 ` Rainer M Krug
2011-10-22 7:58 ` Christian Moe
2011-10-24 9:44 ` Rainer M Krug
2011-10-22 15:52 ` Eric Schulte
2011-10-22 19:07 ` Christian Moe
2011-10-24 10:10 ` Rainer M Krug
2011-10-24 11:37 ` Christian Moe
2011-10-24 12:11 ` Sebastien Vauban
2011-10-24 12:38 ` Christian Moe
2011-10-24 15:07 ` Nicolas Goaziou
2011-10-24 9:50 ` Rainer M Krug
2011-10-25 9:35 ` Sebastien Vauban
2011-10-25 10:06 ` Rainer M Krug
2011-10-25 10:31 ` Sebastien Vauban
2011-10-25 11:47 ` Rainer M Krug
2011-10-25 14:13 ` Eric Schulte
2011-10-26 14:00 ` Sebastien Vauban
2011-10-26 15:20 ` Eric Schulte
2011-10-22 15:26 ` Eric Schulte
2011-10-21 20:24 ` Christian Moe
2011-10-21 21:05 ` Darlan Cavalcante Moreira
2011-10-22 7:08 ` Sebastien Vauban
2011-10-22 15:53 ` Eric Schulte
2011-10-24 18:07 ` Darlan Cavalcante Moreira
2011-10-31 18:53 ` Eric Schulte
2011-10-31 20:18 ` Samuel Wales
[not found] ` <87obwwkia5.fsf@gmail.com>
[not found] ` <CAJcAo8scJXx=3s0f_FDAJXFKW2uh5gFTHwgDRbM6xXohr5ZPzQ@mail.gmail.com>
2011-10-31 22:22 ` Samuel Wales
2011-11-01 1:28 ` Eric Schulte
2011-11-01 14:26 ` Nick Dokos
2011-11-01 15:02 ` Nick Dokos
2011-11-01 15:17 ` Eric Schulte
2011-11-02 11:12 ` Rainer M Krug
2011-11-02 12:18 ` Nicolas Goaziou
2011-11-02 14:16 ` Rainer M Krug
2011-11-03 18:40 ` Eric Schulte
2011-11-03 18:51 ` Jambunathan K
2011-11-04 9:15 ` Rainer M Krug
2011-11-02 12:57 ` Brian Wightman
2011-11-02 14:18 ` Rainer M Krug
2011-11-03 1:29 ` Bastien
2011-10-20 21:27 ` Christian Moe
2011-10-20 21:32 ` Nick Dokos
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
List information: https://www.orgmode.org/
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4EA154CA.4020003@christianmoe.com \
--to=mail@christianmoe.com \
--cc=emacs-orgmode@gnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
Code repositories for project(s) associated with this public inbox
https://git.savannah.gnu.org/cgit/emacs/org-mode.git
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).