* Markup (blod for instance) over line breaks @ 2013-10-13 18:49 Dror Atariah 2013-10-13 19:38 ` Marcin Borkowski 2013-10-14 5:11 ` Eric Abrahamsen 0 siblings, 2 replies; 9+ messages in thread From: Dror Atariah @ 2013-10-13 18:49 UTC (permalink / raw) To: emacs-orgmode [-- Attachment #1: Type: text/plain, Size: 618 bytes --] Dear org-moders, It might be terribly simple, but I failed to find a solution. How can I mark several words as bold (or emphasized or any similar markup), in particular if the words spans over *more then one line*? A similar problem can occur when one is pasting a long line into an org-mode buffer and then, after it is being broken into shorter lines, you try to make it bold. The documentation (http://orgmode.org/org.html#Emphasis-and-monospace) states that this kind of markup is aimed at words - so it might not support sentences and in particular long ones... Is it correct? Thanks in advance, Dror [-- Attachment #2: Type: text/html, Size: 910 bytes --] ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Markup (blod for instance) over line breaks 2013-10-13 18:49 Markup (blod for instance) over line breaks Dror Atariah @ 2013-10-13 19:38 ` Marcin Borkowski 2013-10-13 19:58 ` Dror Atariah 2013-10-14 5:11 ` Eric Abrahamsen 1 sibling, 1 reply; 9+ messages in thread From: Marcin Borkowski @ 2013-10-13 19:38 UTC (permalink / raw) To: emacs-orgmode Dnia 2013-10-13, o godz. 20:49:30 Dror Atariah <drorata@gmail.com> napisał(a): > Dear org-moders, > > It might be terribly simple, but I failed to find a solution. How can > I mark several words as bold (or emphasized or any similar markup), > in particular if the words spans over *more then one line*? > > A similar problem can occur when one is pasting a long line into an > org-mode buffer and then, after it is being broken into shorter > lines, you try to make it bold. > > The documentation > (http://orgmode.org/org.html#Emphasis-and-monospace) states that this > kind of markup is aimed at words - so it might not support sentences > and in particular long ones... Is it correct? Not really an answer, but does visual-line-mode help in your use case? > Thanks in advance, > Dror Hth, -- Marcin Borkowski http://octd.wmi.amu.edu.pl/en/Marcin_Borkowski Adam Mickiewicz University ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Markup (blod for instance) over line breaks 2013-10-13 19:38 ` Marcin Borkowski @ 2013-10-13 19:58 ` Dror Atariah 2013-10-13 20:22 ` Marcin Borkowski 0 siblings, 1 reply; 9+ messages in thread From: Dror Atariah @ 2013-10-13 19:58 UTC (permalink / raw) To: Marcin Borkowski; +Cc: Emacs-orgmode On Oct 13, 2013, at 21:38 PM, Marcin Borkowski wrote: > Dnia 2013-10-13, o godz. 20:49:30 > Dror Atariah <drorata@gmail.com> napisał(a): > >> Dear org-moders, >> >> It might be terribly simple, but I failed to find a solution. How can >> I mark several words as bold (or emphasized or any similar markup), >> in particular if the words spans over *more then one line*? >> >> A similar problem can occur when one is pasting a long line into an >> org-mode buffer and then, after it is being broken into shorter >> lines, you try to make it bold. >> >> The documentation >> (http://orgmode.org/org.html#Emphasis-and-monospace) states that this >> kind of markup is aimed at words - so it might not support sentences >> and in particular long ones... Is it correct? > > Not really an answer, but does visual-line-mode help in your use case? It does help. Doesn't org-mode has some sort of dedicated line-breaking mechanism? How would you turn it into a complete solution? Best, Dror ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Markup (blod for instance) over line breaks 2013-10-13 19:58 ` Dror Atariah @ 2013-10-13 20:22 ` Marcin Borkowski 2013-10-14 6:53 ` Dror Atariah 0 siblings, 1 reply; 9+ messages in thread From: Marcin Borkowski @ 2013-10-13 20:22 UTC (permalink / raw) To: Dror Atariah Dnia 2013-10-13, o godz. 21:58:20 Dror Atariah <drorata@gmail.com> napisał(a): > > On Oct 13, 2013, at 21:38 PM, Marcin Borkowski wrote: > > > Dnia 2013-10-13, o godz. 20:49:30 > > Dror Atariah <drorata@gmail.com> napisał(a): > > > >> Dear org-moders, > >> > >> It might be terribly simple, but I failed to find a solution. How > >> can I mark several words as bold (or emphasized or any similar > >> markup), in particular if the words spans over *more then one > >> line*? > >> > >> A similar problem can occur when one is pasting a long line into an > >> org-mode buffer and then, after it is being broken into shorter > >> lines, you try to make it bold. > >> > >> The documentation > >> (http://orgmode.org/org.html#Emphasis-and-monospace) states that > >> this kind of markup is aimed at words - so it might not support > >> sentences and in particular long ones... Is it correct? > > > > Not really an answer, but does visual-line-mode help in your use > > case? > It does help. Doesn't org-mode has some sort of dedicated > line-breaking mechanism? How would you turn it into a complete > solution? Not that I know of. Basically, "lines" may be /visual/ (i.e., broken by the display engine at spaces etc., but the whole paragraph is one long line in the file) or /physical/ (i.e., with newline characters at the end of each line). In Emacs, you an use M-q to "fill" a paragraph (more or less, convert from visual to physical lines), and something along the lines of C-u 9 9 9 9 9 C-x f M-q to "unfill" a paragraph. (There are also "unfill" functions (quod google), though they are not part of stock Emacs.) There is an ongoing discussion on which is better, too long to repeat any of the arguments here. For a LaTeX-centric approach, see e.g. http://tex.stackexchange.com/questions/4376/good-strategy-for-line-breaks-with-paragraphs-of-latex-source (note that Emacs's longline-mode was a predecessor of visual-line-mode). And indeed, bold/italic spanning more than a few words might not be a good idea. And in cases it is, it's problably better to define a specialized "environment" (in LaTeX lingo) - like one for theorems (which are often typeset in italics). > Best, > Dror Best, -- Marcin Borkowski http://octd.wmi.amu.edu.pl/en/Marcin_Borkowski Adam Mickiewicz University ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Markup (blod for instance) over line breaks 2013-10-13 20:22 ` Marcin Borkowski @ 2013-10-14 6:53 ` Dror Atariah 2013-10-14 20:14 ` Marcin Borkowski 0 siblings, 1 reply; 9+ messages in thread From: Dror Atariah @ 2013-10-14 6:53 UTC (permalink / raw) To: Marcin Borkowski; +Cc: Emacs-orgmode On Oct 13, 2013, at 22:22 PM, Marcin Borkowski wrote: > Dnia 2013-10-13, o godz. 21:58:20 > Dror Atariah <drorata@gmail.com> napisał(a): > >> >> On Oct 13, 2013, at 21:38 PM, Marcin Borkowski wrote: >> >>> Dnia 2013-10-13, o godz. 20:49:30 >>> Dror Atariah <drorata@gmail.com> napisał(a): >>> >>>> Dear org-moders, >>>> >>>> It might be terribly simple, but I failed to find a solution. How >>>> can I mark several words as bold (or emphasized or any similar >>>> markup), in particular if the words spans over *more then one >>>> line*? >>>> >>>> A similar problem can occur when one is pasting a long line into an >>>> org-mode buffer and then, after it is being broken into shorter >>>> lines, you try to make it bold. >>>> >>>> The documentation >>>> (http://orgmode.org/org.html#Emphasis-and-monospace) states that >>>> this kind of markup is aimed at words - so it might not support >>>> sentences and in particular long ones... Is it correct? >>> >>> Not really an answer, but does visual-line-mode help in your use >>> case? >> It does help. Doesn't org-mode has some sort of dedicated >> line-breaking mechanism? How would you turn it into a complete >> solution? > > Not that I know of. Basically, "lines" may be /visual/ (i.e., broken by > the display engine at spaces etc., but the whole paragraph is one long > line in the file) or /physical/ (i.e., with newline characters at the > end of each line). In Emacs, you an use M-q to "fill" a paragraph > (more or less, convert from visual to physical lines), and something > along the lines of C-u 9 9 9 9 9 C-x f M-q to "unfill" a paragraph. > (There are also "unfill" functions (quod google), though they are not > part of stock Emacs.) > > There is an ongoing discussion on which is better, too long to repeat > any of the arguments here. For a LaTeX-centric approach, see e.g. > http://tex.stackexchange.com/questions/4376/good-strategy-for-line-breaks-with-paragraphs-of-latex-source > (note that Emacs's longline-mode was a predecessor of visual-line-mode). In this case I suppose I will revert to visual-line-mode, just like I have in my LaTeX buffers. > And indeed, bold/italic spanning more than a few words might not be a > good idea. And in cases it is, it's problably better to define a > specialized "environment" (in LaTeX lingo) - like one for theorems > (which are often typeset in italics). What is the org-mode's equivalent of LaTeX's environment? That COULD be very helpful. Thanks, Dror ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Markup (blod for instance) over line breaks 2013-10-14 6:53 ` Dror Atariah @ 2013-10-14 20:14 ` Marcin Borkowski 0 siblings, 0 replies; 9+ messages in thread From: Marcin Borkowski @ 2013-10-14 20:14 UTC (permalink / raw) To: emacs-orgmode Dnia 2013-10-14, o godz. 08:53:49 Dror Atariah <drorata@gmail.com> napisał(a): > > And indeed, bold/italic spanning more than a few words might not be > > a good idea. And in cases it is, it's problably better to define a > > specialized "environment" (in LaTeX lingo) - like one for theorems > > (which are often typeset in italics). > What is the org-mode's equivalent of LaTeX's environment? That COULD > be very helpful. AFAIR, you can say just \begin{theorem} blah, blah \end{theorem} Of course, if you export to HTML or anything non-LaTeX-y, you're toast. There are all these #+BEGIN... ... #+END... things, but I don't know how to define new ones like these. > Thanks, > Dror Best, -- Marcin Borkowski http://octd.wmi.amu.edu.pl/en/Marcin_Borkowski Adam Mickiewicz University ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Markup (blod for instance) over line breaks 2013-10-13 18:49 Markup (blod for instance) over line breaks Dror Atariah 2013-10-13 19:38 ` Marcin Borkowski @ 2013-10-14 5:11 ` Eric Abrahamsen 2013-10-14 6:55 ` Dror Atariah 1 sibling, 1 reply; 9+ messages in thread From: Eric Abrahamsen @ 2013-10-14 5:11 UTC (permalink / raw) To: emacs-orgmode Dror Atariah <drorata@gmail.com> writes: > Dear org-moders, > > It might be terribly simple, but I failed to find a solution. How can > I mark several words as bold (or emphasized or any similar markup), > in particular if the words spans over *more then one line*? > > A similar problem can occur when one is pasting a long line into an > org-mode buffer and then, after it is being broken into shorter > lines, you try to make it bold. > > The documentation (http://orgmode.org/org.html#Emphasis-and-monospace > ) states that this kind of markup is aimed at words - so it might not > support sentences and in particula r long ones... Is it correct? > > Thanks in advance, > Dror I use autofill mode, and then change the value of `org-emphasis-regexp-components'. That variable is a list, the fifth element of which says how many newlines the emphasis markers will allow. I set it to three: (setf (nth 4 org-emphasis-regexp-components) 3) Hope that helps, Eric ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Markup (blod for instance) over line breaks 2013-10-14 5:11 ` Eric Abrahamsen @ 2013-10-14 6:55 ` Dror Atariah 2013-10-14 8:19 ` Eric Abrahamsen 0 siblings, 1 reply; 9+ messages in thread From: Dror Atariah @ 2013-10-14 6:55 UTC (permalink / raw) To: Eric Abrahamsen; +Cc: emacs-orgmode On Oct 14, 2013, at 07:11 AM, Eric Abrahamsen wrote: > Dror Atariah <drorata@gmail.com> writes: > >> Dear org-moders, >> >> It might be terribly simple, but I failed to find a solution. How can >> I mark several words as bold (or emphasized or any similar markup), >> in particular if the words spans over *more then one line*? >> >> A similar problem can occur when one is pasting a long line into an >> org-mode buffer and then, after it is being broken into shorter >> lines, you try to make it bold. >> >> The documentation (http://orgmode.org/org.html#Emphasis-and-monospace >> ) states that this kind of markup is aimed at words - so it might not >> support sentences and in particula r long ones... Is it correct? >> >> Thanks in advance, >> Dror > > I use autofill mode, and then change the value of > `org-emphasis-regexp-components'. That variable is a list, the fifth > element of which says how many newlines the emphasis markers will allow. > I set it to three: > > (setf (nth 4 org-emphasis-regexp-components) 3) Thanks for the tip. It somehow didn't help. I did "M-x org-reload" after setting this, but it didn't help spanning the italic in my case over several lines. Cheers, Dror ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Markup (blod for instance) over line breaks 2013-10-14 6:55 ` Dror Atariah @ 2013-10-14 8:19 ` Eric Abrahamsen 0 siblings, 0 replies; 9+ messages in thread From: Eric Abrahamsen @ 2013-10-14 8:19 UTC (permalink / raw) To: emacs-orgmode Dror Atariah <drorata@gmail.com> writes: > On Oct 14, 2013, at 07:11 AM, Eric Abrahamsen wrote: > >> Dror Atariah <drorata@gmail.com> writes: >> >>> Dear org-moders, >>> >>> It might be terribly simple, but I failed to find a solution. How can >>> I mark several words as bold (or emphasized or any similar markup), >>> in particular if the words spans over *more then one line*? >>> >>> A similar problem can occur when one is pasting a long line into an >>> org-mode buffer and then, after it is being broken into shorter >>> lines, you try to make it bold. >>> >>> The documentation (http://orgmode.org/org.html#Emphasis-and-monospace >>> ) states that this kind of markup is aimed at words - so it might not >>> support sentences and in particula r long ones... Is it correct? >>> >>> Thanks in advance, >>> Dror >> >> I use autofill mode, and then change the value of >> `org-emphasis-regexp-components'. That variable is a list, the fifth >> element of which says how many newlines the emphasis markers will allow. >> I set it to three: >> >> (setf (nth 4 org-emphasis-regexp-components) 3) > Thanks for the tip. It somehow didn't help. I did "M-x org-reload" after setting this, but it didn't help spanning the italic in my case over several lines. Hmm. I do find it sometimes needs to be "poked" a few times to really take -- sometimes reloading org more than once, or calling "org-mode" in a buffer that's already org-mode. Often hitting M-q to refill the paragraph is enough to do the trick. It won't show the italic over even a single line break? E ^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2013-10-14 20:14 UTC | newest] Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2013-10-13 18:49 Markup (blod for instance) over line breaks Dror Atariah 2013-10-13 19:38 ` Marcin Borkowski 2013-10-13 19:58 ` Dror Atariah 2013-10-13 20:22 ` Marcin Borkowski 2013-10-14 6:53 ` Dror Atariah 2013-10-14 20:14 ` Marcin Borkowski 2013-10-14 5:11 ` Eric Abrahamsen 2013-10-14 6:55 ` Dror Atariah 2013-10-14 8:19 ` Eric Abrahamsen
Code repositories for project(s) associated with this public inbox https://git.savannah.gnu.org/cgit/emacs/org-mode.git This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).