* Problem with 7.02 - org-capture-templates not set from init file
@ 2010-11-01 14:06 Jeffrey DeLeo
2010-11-01 19:48 ` Carsten Dominik
0 siblings, 1 reply; 6+ messages in thread
From: Jeffrey DeLeo @ 2010-11-01 14:06 UTC (permalink / raw)
To: emacs-orgmode
Since moving from org-version 7.01 to 7.02, the variable
"org-capture-templates", which I set in my .emacs.el in a
custom-set-variables is not being set. No error is generated, just the
variable remains nil.
Here's how I set it:
--8<---------------cut here---------------start------------->8---
'(org-capture-templates (quote (("t" "Todo" entry (file+headline "Tasks.org" "Tasks") "* TODO %?
%i
%a") ("c" "Care" entry (file+headline "Care.org" "Care Notes") "* %? %U
%i
%a") ("j" "Journal" entry (file+datetree "Journal.org") "*
%?"))))
--8<---------------cut here---------------end--------------->8---
Am I doing something funny here, or did something break?
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Problem with 7.02 - org-capture-templates not set from init file
2010-11-01 14:06 Problem with 7.02 - org-capture-templates not set from init file Jeffrey DeLeo
@ 2010-11-01 19:48 ` Carsten Dominik
2010-11-02 14:29 ` Jeffrey DeLeo
0 siblings, 1 reply; 6+ messages in thread
From: Carsten Dominik @ 2010-11-01 19:48 UTC (permalink / raw)
To: Jeffrey DeLeo; +Cc: emacs-orgmode
On Nov 1, 2010, at 3:06 PM, Jeffrey DeLeo wrote:
> Since moving from org-version 7.01 to 7.02, the variable
> "org-capture-templates", which I set in my .emacs.el in a
> custom-set-variables is not being set. No error is generated, just the
> variable remains nil.
Are you sure this is different in 7.1 and 7.2? Is the variable
nil or undefined?
The think is, the custom-set-variables only stores the intended value.
If the variable is not yet defined (i.e. org-capture.el not yet loaded),
it will wait until you load the package and then set the variable to
the customized value.
- Carsten
>
> Here's how I set it:
>
> --8<---------------cut here---------------start------------->8---
> '(org-capture-templates (quote (("t" "Todo" entry (file+headline
> "Tasks.org" "Tasks") "* TODO %?
> %i
> %a") ("c" "Care" entry (file+headline "Care.org" "Care Notes")
> "* %? %U
> %i
> %a") ("j" "Journal" entry (file+datetree "Journal.org") "*
> %?"))))
> --8<---------------cut here---------------end--------------->8---
>
> Am I doing something funny here, or did something break?
>
> _______________________________________________
> Emacs-orgmode mailing list
> Please use `Reply All' to send replies to the list.
> Emacs-orgmode@gnu.org
> http://lists.gnu.org/mailman/listinfo/emacs-orgmode
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Problem with 7.02 - org-capture-templates not set from init file
2010-11-01 19:48 ` Carsten Dominik
@ 2010-11-02 14:29 ` Jeffrey DeLeo
2010-11-02 15:30 ` Carsten Dominik
0 siblings, 1 reply; 6+ messages in thread
From: Jeffrey DeLeo @ 2010-11-02 14:29 UTC (permalink / raw)
To: emacs-orgmode
One thing I noticed that changed in org-install.el from 7.01h to 7.02 -
in 7.02 is being explicitly defined in org-install.el as nil, that
wasn't happening before.
7.01h:
;;;### (autoloads (org-capture-import-remember-templates org-capture-insert-template-here
;;;;;; org-capture) "org-capture" "lisp/org-capture.el" (19549 1164))
;;; Generated autoloads from lisp/org-capture.el
(autoload 'org-capture "org-capture" "\
Capture something.
\\<org-capture-mode-map>
This will let you select a template from `org-capture-templates', and then
file the newly captured information. The text is immediately inserted
at the target location, and an indirect buffer is shown where you can
edit it. Pressing \\[org-capture-finalize] brings you back to the previous state
of Emacs, so that you can continue your work.
When called interactively with a \\[universal-argument] prefix argument GOTO, don't capture
anything, just go to the file/headline where the selected template
stores its notes. With a double prefix argument \\[universal-argument] \\[universal-argument], go to the last note
stored.
When called with a `C-0' (zero) prefix, insert a template at point.
Lisp programs can set KEYS to a string associated with a template in
`org-capture-templates'. In this case, interactive selection will be
bypassed.
\(fn &optional GOTO KEYS)" t nil)
7.02
;;;### (autoloads (org-capture-import-remember-templates org-capture-insert-template-here
;;;;;; org-capture org-capture-templates) "org-capture" "lisp/org-capture.el"
;;;;;; (19658 27920))
;;; Generated autoloads from lisp/org-capture.el
(defvar org-capture-templates nil "\
Templates for the creation of new entries.
Each entry is a list with the following items:
keys The keys that will select the template, as a string, characters
only, for example \"a\" for a template to be selected with a
single key, or \"bt\" for selection with two keys. When using
several keys, keys using the same prefix key must be together
in the list and preceded by a 2-element entry explaining the
prefix key, for example
(\"b\" \"Templates for marking stuff to buy\")
The \"C\" key is used by default for quick access to the
customization of the template variable. But if you want to use
that key for a template, you can.
description A short string describing the template, will be shown during
selection.
type The type of entry. Valid types are:
entry an Org-mode node, with a headline. Will be
filed as the child of the target entry or as
a top-level entry.
item a plain list item, will be placed in the
first plain list at the target
location.
checkitem a checkbox item. This differs from the
plain list item only is so far as it uses a
different default template.
table-line a new line in the first table at target location.
plain text to be inserted as it is.
target Specification of where the captured item should be placed.
In Org-mode files, targets usually define a node. Entries will
become children of this node, other types will be added to the
table or list in the body of this node.
Valid values are:
(file \"path/to/file\")
Text will be placed at the beginning or end of that file
(id \"id of existing org entry\")
File as child of this entry, or in the body of the entry
(file+headline \"path/to/file\" \"node headline\")
Fast configuration if the target heading is unique in the file
(file+olp \"path/to/file\" \"Level 1 heading\" \"Level 2\" ...)
For non-unique headings, the full path is safer
(file+regexp \"path/to/file\" \"regexp to find location\")
File to the entry matching regexp
(file+datetree \"path/to/file\")
Will create a heading in a date tree
(file+function \"path/to/file\" function-finding-location)
A function to find the right location in the file
(clock)
File to the entry that is currently being clocked
(function function-finding-location)
Most general way, write your own function to find both
file and location
template The template for creating the capture item. If you leave this
empty, an appropriate default template will be used. See below
for more details. Instead of a string, this may also be one of
(file \"/path/to/template-file\")
(function function-returning-the-template)
in order to get a template from a file, or dynamically
from a function.
The rest of the entry is a property list of additional options. Recognized
properties are:
:prepend Normally newly captured information will be appended at
the target location (last child, last table line,
last list item...). Setting this property will
change that.
:immediate-finish When set, do not offer to edit the information, just
file it away immediately. This makes sense if the
template only needs information that can be added
automatically.
:empty-lines Set this to the number of lines the should be inserted
before and after the new item. Default 0, only common
other value is 1.
:clock-in Start the clock in this item.
:clock-resume Start the interrupted clock when finishing the capture.
:unnarrowed Do not narrow the target buffer, simply show the
full buffer. Default is to narrow it so that you
only see the new stuff.
:table-line-pos Specification of the location in the table where the
new line should be inserted. It looks like \"II-3\"
which means that the new line should become the third
line before the second horizontal separator line.
:kill-buffer If the target file was not yet visited by a buffer when
capture was invoked, kill the buffer again after capture
is finalized.
The template defines the text to be inserted. Often this is an org-mode
entry (so the first line should start with a star) that will be filed as a
child of the target headline. It can also be freely formatted text.
Furthermore, the following %-escapes will be replaced with content:
%^{prompt} prompt the user for a string and replace this sequence with it.
A default value and a completion table ca be specified like this:
%^{prompt|default|completion2|completion3|...}
%t time stamp, date only
%T time stamp with date and time
%u, %U like the above, but inactive time stamps
%^t like %t, but prompt for date. Similarly %^T, %^u, %^U.
You may define a prompt like %^{Please specify birthday
%n user name (taken from `user-full-name')
%a annotation, normally the link created with `org-store-link'
%i initial content, copied from the active region. If %i is
indented, the entire inserted text will be indented as well.
%c current kill ring head
%x content of the X clipboard
%^C interactive selection of which kill or clip to use
%^L like %^C, but insert as link
%k title of currently clocked task
%K link to currently clocked task
%^g prompt for tags, with completion on tags in target file
%^G prompt for tags, with completion on all tags in all agenda files
%^{prop}p prompt the user for a value for property `prop'
%:keyword specific information for certain link types, see below
%[pathname] insert the contents of the file given by `pathname'
%(sexp) evaluate elisp `(sexp)' and replace with the result
%? After completing the template, position cursor here.
Apart from these general escapes, you can access information specific to the
link type that is created. For example, calling `org-capture' in emails
or gnus will record the author and the subject of the message, which you
can access with \"%:from\" and \"%:subject\", respectively. Here is a
complete list of what is recorded for each link type.
Link type | Available information
------------------------+------------------------------------------------------
bbdb | %:type %:name %:company
vm, wl, mh, mew, rmail | %:type %:subject %:message-id
| %:from %:fromname %:fromaddress
| %:to %:toname %:toaddress
| %:fromto (either \"to NAME\" or \"from NAME\")
| %:date
| %:date-timestamp (as active timestamp)
| %:date-timestamp-inactive (as inactive timestamp)
gnus | %:group, for messages also all email fields
w3, w3m | %:type %:url
info | %:type %:file %:node
calendar | %:type %:date")
(custom-autoload 'org-capture-templates "org-capture" t)
(autoload 'org-capture "org-capture" "\
Capture something.
\\<org-capture-mode-map>
This will let you select a template from `org-capture-templates', and then
file the newly captured information. The text is immediately inserted
at the target location, and an indirect buffer is shown where you can
edit it. Pressing \\[org-capture-finalize] brings you back to the previous state
of Emacs, so that you can continue your work.
When called interactively with a \\[universal-argument] prefix argument GOTO, don't capture
anything, just go to the file/headline where the selected template
stores its notes. With a double prefix argument \\[universal-argument] \\[universal-argument], go to the last note
stored.
When called with a `C-0' (zero) prefix, insert a template at point.
Lisp programs can set KEYS to a string associated with a template in
`org-capture-templates'. In this case, interactive selection will be
bypassed.
\(fn &optional GOTO KEYS)" t nil)
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Re: Problem with 7.02 - org-capture-templates not set from init file
2010-11-02 14:29 ` Jeffrey DeLeo
@ 2010-11-02 15:30 ` Carsten Dominik
2010-11-02 17:40 ` Jeffrey DeLeo
0 siblings, 1 reply; 6+ messages in thread
From: Carsten Dominik @ 2010-11-02 15:30 UTC (permalink / raw)
To: Jeffrey DeLeo; +Cc: emacs-orgmode
On Nov 2, 2010, at 3:29 PM, Jeffrey DeLeo wrote:
> One thing I noticed that changed in org-install.el from 7.01h to
> 7.02 -
> in 7.02 is being explicitly defined in org-install.el as nil, that
> wasn't happening before.
That is right. However, when org-capture gets loaded, the value will
change to the customize value - I hope.
Greetings
- Carsten
>
> 7.01h:
> ;;;### (autoloads (org-capture-import-remember-templates org-capture-
> insert-template-here
> ;;;;;; org-capture) "org-capture" "lisp/org-capture.el" (19549 1164))
> ;;; Generated autoloads from lisp/org-capture.el
>
> (autoload 'org-capture "org-capture" "\
> Capture something.
> \\<org-capture-mode-map>
> This will let you select a template from `org-capture-templates',
> and then
> file the newly captured information. The text is immediately inserted
> at the target location, and an indirect buffer is shown where you can
> edit it. Pressing \\[org-capture-finalize] brings you back to the
> previous state
> of Emacs, so that you can continue your work.
>
> When called interactively with a \\[universal-argument] prefix
> argument GOTO, don't capture
> anything, just go to the file/headline where the selected template
> stores its notes. With a double prefix argument \\[universal-
> argument] \\[universal-argument], go to the last note
> stored.
>
> When called with a `C-0' (zero) prefix, insert a template at point.
>
> Lisp programs can set KEYS to a string associated with a template in
> `org-capture-templates'. In this case, interactive selection will be
> bypassed.
>
> \(fn &optional GOTO KEYS)" t nil)
>
> 7.02
> ;;;### (autoloads (org-capture-import-remember-templates org-capture-
> insert-template-here
> ;;;;;; org-capture org-capture-templates) "org-capture" "lisp/org-
> capture.el"
> ;;;;;; (19658 27920))
> ;;; Generated autoloads from lisp/org-capture.el
>
> (defvar org-capture-templates nil "\
> Templates for the creation of new entries.
>
> Each entry is a list with the following items:
>
> keys The keys that will select the template, as a string,
> characters
> only, for example \"a\" for a template to be selected
> with a
> single key, or \"bt\" for selection with two keys.
> When using
> several keys, keys using the same prefix key must be
> together
> in the list and preceded by a 2-element entry
> explaining the
> prefix key, for example
>
> (\"b\" \"Templates for marking stuff to buy\")
>
> The \"C\" key is used by default for quick access to the
> customization of the template variable. But if you
> want to use
> that key for a template, you can.
>
> description A short string describing the template, will be shown
> during
> selection.
>
> type The type of entry. Valid types are:
> entry an Org-mode node, with a headline. Will be
> filed as the child of the target entry or
> as
> a top-level entry.
> item a plain list item, will be placed in the
> first plain list at the target
> location.
> checkitem a checkbox item. This differs from the
> plain list item only is so far as it uses a
> different default template.
> table-line a new line in the first table at target
> location.
> plain text to be inserted as it is.
>
> target Specification of where the captured item should be
> placed.
> In Org-mode files, targets usually define a node.
> Entries will
> become children of this node, other types will be added
> to the
> table or list in the body of this node.
>
> Valid values are:
>
> (file \"path/to/file\")
> Text will be placed at the beginning or end of that
> file
>
> (id \"id of existing org entry\")
> File as child of this entry, or in the body of the
> entry
>
> (file+headline \"path/to/file\" \"node headline\")
> Fast configuration if the target heading is unique
> in the file
>
> (file+olp \"path/to/file\" \"Level 1 heading\" \"Level
> 2\" ...)
> For non-unique headings, the full path is safer
>
> (file+regexp \"path/to/file\" \"regexp to find location
> \")
> File to the entry matching regexp
>
> (file+datetree \"path/to/file\")
> Will create a heading in a date tree
>
> (file+function \"path/to/file\" function-finding-
> location)
> A function to find the right location in the file
>
> (clock)
> File to the entry that is currently being clocked
>
> (function function-finding-location)
> Most general way, write your own function to find both
> file and location
>
> template The template for creating the capture item. If you
> leave this
> empty, an appropriate default template will be used.
> See below
> for more details. Instead of a string, this may also
> be one of
>
> (file \"/path/to/template-file\")
> (function function-returning-the-template)
>
> in order to get a template from a file, or dynamically
> from a function.
>
> The rest of the entry is a property list of additional options.
> Recognized
> properties are:
>
> :prepend Normally newly captured information will be
> appended at
> the target location (last child, last table line,
> last list item...). Setting this property will
> change that.
>
> :immediate-finish When set, do not offer to edit the information,
> just
> file it away immediately. This makes sense if
> the
> template only needs information that can be added
> automatically.
>
> :empty-lines Set this to the number of lines the should be
> inserted
> before and after the new item. Default 0, only
> common
> other value is 1.
>
> :clock-in Start the clock in this item.
>
> :clock-resume Start the interrupted clock when finishing the
> capture.
>
> :unnarrowed Do not narrow the target buffer, simply show the
> full buffer. Default is to narrow it so that you
> only see the new stuff.
>
> :table-line-pos Specification of the location in the table
> where the
> new line should be inserted. It looks like
> \"II-3\"
> which means that the new line should become the
> third
> line before the second horizontal separator line.
>
> :kill-buffer If the target file was not yet visited by a
> buffer when
> capture was invoked, kill the buffer again
> after capture
> is finalized.
>
> The template defines the text to be inserted. Often this is an org-
> mode
> entry (so the first line should start with a star) that will be
> filed as a
> child of the target headline. It can also be freely formatted text.
> Furthermore, the following %-escapes will be replaced with content:
>
> %^{prompt} prompt the user for a string and replace this sequence
> with it.
> A default value and a completion table ca be specified
> like this:
> %^{prompt|default|completion2|completion3|...}
> %t time stamp, date only
> %T time stamp with date and time
> %u, %U like the above, but inactive time stamps
> %^t like %t, but prompt for date. Similarly %^T, %^u, %^U.
> You may define a prompt like %^{Please specify birthday
> %n user name (taken from `user-full-name')
> %a annotation, normally the link created with `org-store-
> link'
> %i initial content, copied from the active region. If %i
> is
> indented, the entire inserted text will be indented as
> well.
> %c current kill ring head
> %x content of the X clipboard
> %^C interactive selection of which kill or clip to use
> %^L like %^C, but insert as link
> %k title of currently clocked task
> %K link to currently clocked task
> %^g prompt for tags, with completion on tags in target file
> %^G prompt for tags, with completion on all tags in all
> agenda files
> %^{prop}p prompt the user for a value for property `prop'
> %:keyword specific information for certain link types, see below
> %[pathname] insert the contents of the file given by `pathname'
> %(sexp) evaluate elisp `(sexp)' and replace with the result
>
> %? After completing the template, position cursor here.
>
> Apart from these general escapes, you can access information
> specific to the
> link type that is created. For example, calling `org-capture' in
> emails
> or gnus will record the author and the subject of the message, which
> you
> can access with \"%:from\" and \"%:subject\", respectively. Here is a
> complete list of what is recorded for each link type.
>
> Link type | Available information
> ------------------------
> +------------------------------------------------------
> bbdb | %:type %:name %:company
> vm, wl, mh, mew, rmail | %:type %:subject %:message-id
> | %:from %:fromname %:fromaddress
> | %:to %:toname %:toaddress
> | %:fromto (either \"to NAME\" or \"from
> NAME\")
> | %:date
> | %:date-timestamp (as active timestamp)
> | %:date-timestamp-inactive (as inactive
> timestamp)
> gnus | %:group, for messages also all email fields
> w3, w3m | %:type %:url
> info | %:type %:file %:node
> calendar | %:type %:date")
>
> (custom-autoload 'org-capture-templates "org-capture" t)
>
> (autoload 'org-capture "org-capture" "\
> Capture something.
> \\<org-capture-mode-map>
> This will let you select a template from `org-capture-templates',
> and then
> file the newly captured information. The text is immediately inserted
> at the target location, and an indirect buffer is shown where you can
> edit it. Pressing \\[org-capture-finalize] brings you back to the
> previous state
> of Emacs, so that you can continue your work.
>
> When called interactively with a \\[universal-argument] prefix
> argument GOTO, don't capture
> anything, just go to the file/headline where the selected template
> stores its notes. With a double prefix argument \\[universal-
> argument] \\[universal-argument], go to the last note
> stored.
>
> When called with a `C-0' (zero) prefix, insert a template at point.
>
> Lisp programs can set KEYS to a string associated with a template in
> `org-capture-templates'. In this case, interactive selection will be
> bypassed.
>
> \(fn &optional GOTO KEYS)" t nil)
>
> _______________________________________________
> Emacs-orgmode mailing list
> Please use `Reply All' to send replies to the list.
> Emacs-orgmode@gnu.org
> http://lists.gnu.org/mailman/listinfo/emacs-orgmode
- Carsten
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Problem with 7.02 - org-capture-templates not set from init file
2010-11-02 15:30 ` Carsten Dominik
@ 2010-11-02 17:40 ` Jeffrey DeLeo
2010-11-02 21:12 ` Anupam Sengupta
0 siblings, 1 reply; 6+ messages in thread
From: Jeffrey DeLeo @ 2010-11-02 17:40 UTC (permalink / raw)
To: emacs-orgmode
OK, I found the problem. In my emacs init file, further down I had:
(require 'gnus-load) ;; for dev gnus
(require 'message)
(require 'bbdb)
(require 'org-install)
(require 'org-icalendar)
(require 'org-mobile)
...
Removing these requires results in working org and not stomping on
org-capture-templates.
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Problem with 7.02 - org-capture-templates not set from init file
2010-11-02 17:40 ` Jeffrey DeLeo
@ 2010-11-02 21:12 ` Anupam Sengupta
0 siblings, 0 replies; 6+ messages in thread
From: Anupam Sengupta @ 2010-11-02 21:12 UTC (permalink / raw)
To: Jeffrey DeLeo; +Cc: emacs-orgmode
>>>>> Jeffrey DeLeo <jeff.deleo@rigpa.org> writes:
> OK, I found the problem. In my emacs init file, further down I
> had: (require 'gnus-load) ;; for dev gnus (require 'message)
> (require 'bbdb) (require 'org-install) (require 'org-icalendar)
> (require 'org-mobile) ...
> Removing these requires results in working org and not stomping on
> org-capture-templates.
I am somewhat confused here. Why would removal of the `require'
statements fix the problem? Should we not *have* (require 'org-install)
in order to have the latest org-mode be activated and loaded?
Actually, I am having the same problem here after upgrading to 7.02.
Hitting C-cc does run `org-capture' correctly, but the value of
`org-capture-templates' (which was set using the customize interface,
and has been saved to a separate emacs-custom.el file) does not have the
set value.
Using C-h v on `org-capture-templates', I get:
,----
| org-capture-templates is a variable defined in `org-capture.el'.
| Its value is nil
|
| Documentation:
| Templates for the creation of new entries.
`----
Specifically, the value of this variable remains as `nil', and
attempting to view the value via `customize-variable' returns a state of
"CHANGED outside Customize". However, the actual value is empty.
,----
| Org Capture Templates:
| INS
| State: CHANGED outside Customize; operating on it here may be unreliable.
| Templates for the creation of new entries.
`----
I am running GNU Emacs 23.2.50 and org-version does confirm org-7.02.
BTW, whats with the org-7.3 on http://orgmode.org?
Regards,
--
Anupam Sengupta
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2010-11-02 21:13 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-11-01 14:06 Problem with 7.02 - org-capture-templates not set from init file Jeffrey DeLeo
2010-11-01 19:48 ` Carsten Dominik
2010-11-02 14:29 ` Jeffrey DeLeo
2010-11-02 15:30 ` Carsten Dominik
2010-11-02 17:40 ` Jeffrey DeLeo
2010-11-02 21:12 ` Anupam Sengupta
Code repositories for project(s) associated with this public inbox
https://git.savannah.gnu.org/cgit/emacs/org-mode.git
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).