* Code with line numbers in HTML export @ 2009-03-12 0:37 Saptarshi Guha 2009-03-12 2:29 ` Nick Dokos 0 siblings, 1 reply; 10+ messages in thread From: Saptarshi Guha @ 2009-03-12 0:37 UTC (permalink / raw) To: emacs-orgmode Hello, I assume in the BEGIN_SRC region, I cannot export the code with line numbers, however I came across this .linenr the line number in a code example Does this mean, there is some option to generate line numbers in the exported BEGIN_SRC? Thanks for your time Saptarshi Guha ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Code with line numbers in HTML export 2009-03-12 0:37 Code with line numbers in HTML export Saptarshi Guha @ 2009-03-12 2:29 ` Nick Dokos 2009-03-12 3:55 ` Saptarshi Guha 0 siblings, 1 reply; 10+ messages in thread From: Nick Dokos @ 2009-03-12 2:29 UTC (permalink / raw) To: saptarshi.guha; +Cc: emacs-orgmode Saptarshi Guha <saptarshi.guha@gmail.com> wrote: > I assume in the BEGIN_SRC region, I cannot export the code with line > numbers, however I > came across this > .linenr the line number in a code example > > Does this mean, there is some option to generate line numbers in the > exported BEGIN_SRC? > Read the section "Literal Examples" in the org manual: evaluate the following form in emacs by pressing C-x C-e after the closing parenthesis (Info-goto-node "(org)Literal Examples") or on the web http://orgmode.org/manual/Literal-examples.html#Literal-examples HTH, Nick ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Code with line numbers in HTML export 2009-03-12 2:29 ` Nick Dokos @ 2009-03-12 3:55 ` Saptarshi Guha 2009-03-12 4:25 ` Manish 2009-03-12 14:03 ` Nick Dokos 0 siblings, 2 replies; 10+ messages in thread From: Saptarshi Guha @ 2009-03-12 3:55 UTC (permalink / raw) To: nicholas.dokos; +Cc: emacs-orgmode Thank you, quite excited I tried this small org file *Title Some tex #+BEGIN_SRC emacs-lisp -n (save-excursion (goto-char (point-min)) #+END_SRC Only to get this in the html file (as copied from my browser): (save-excursion (goto-char (point-min)) The corresponding html is <p>(save-excursion (goto-char (point-min)) </p> if i remove the -n it works - the exported code is formatted but no line numbers. (org version 6.09a) Saptarshi Guha On Wed, Mar 11, 2009 at 10:29 PM, Nick Dokos <nicholas.dokos@hp.com> wrote: > Saptarshi Guha <saptarshi.guha@gmail.com> wrote: > >> I assume in the BEGIN_SRC region, I cannot export the code with line >> numbers, however I >> came across this >> .linenr the line number in a code example >> >> Does this mean, there is some option to generate line numbers in the >> exported BEGIN_SRC? >> > > Read the section "Literal Examples" in the org manual: evaluate the > following form in emacs by pressing C-x C-e after the closing parenthesis > > (Info-goto-node "(org)Literal Examples") > > or on the web > > http://orgmode.org/manual/Literal-examples.html#Literal-examples > > HTH, > Nick > > > ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Code with line numbers in HTML export 2009-03-12 3:55 ` Saptarshi Guha @ 2009-03-12 4:25 ` Manish 2009-03-12 4:28 ` Saptarshi Guha 2009-03-12 14:03 ` Nick Dokos 1 sibling, 1 reply; 10+ messages in thread From: Manish @ 2009-03-12 4:25 UTC (permalink / raw) To: saptarshi.guha; +Cc: emacs-orgmode On Thu, Mar 12, 2009 at 9:25 AM, Saptarshi Guha wrote: > Thank you, quite excited I tried this small org file > *Title > Some tex > > #+BEGIN_SRC emacs-lisp -n > (save-excursion > (goto-char (point-min)) > #+END_SRC > > Only to get this in the html file (as copied from my browser): > > (save-excursion (goto-char (point-min)) > > The corresponding html is > <p>(save-excursion > (goto-char (point-min)) > </p> > > if i remove the -n it works - the exported code is formatted but no > line numbers. > (org version 6.09a) Line numbers and references were added in 6.17. -- Manish ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Code with line numbers in HTML export 2009-03-12 4:25 ` Manish @ 2009-03-12 4:28 ` Saptarshi Guha 2009-03-12 4:41 ` Saptarshi Guha 0 siblings, 1 reply; 10+ messages in thread From: Saptarshi Guha @ 2009-03-12 4:28 UTC (permalink / raw) To: Manish; +Cc: emacs-orgmode Ok. I'll update. Thanks Saptarshi Guha On Thu, Mar 12, 2009 at 12:25 AM, Manish <mailtomanish.sharma@gmail.com> wrote: > On Thu, Mar 12, 2009 at 9:25 AM, Saptarshi Guha wrote: >> Thank you, quite excited I tried this small org file >> *Title >> Some tex >> >> #+BEGIN_SRC emacs-lisp -n >> (save-excursion >> (goto-char (point-min)) >> #+END_SRC >> >> Only to get this in the html file (as copied from my browser): >> >> (save-excursion (goto-char (point-min)) >> >> The corresponding html is >> <p>(save-excursion >> (goto-char (point-min)) >> </p> >> >> if i remove the -n it works - the exported code is formatted but no >> line numbers. >> (org version 6.09a) > > Line numbers and references were added in 6.17. > > -- > Manish > ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Code with line numbers in HTML export 2009-03-12 4:28 ` Saptarshi Guha @ 2009-03-12 4:41 ` Saptarshi Guha 2009-03-12 7:14 ` Carsten Dominik 0 siblings, 1 reply; 10+ messages in thread From: Saptarshi Guha @ 2009-03-12 4:41 UTC (permalink / raw) To: emacs-orgmode Lovely. One last question, is there a way to place the source in a table of two cols one for the col numbers and one for the code? So that the reader may easily select the code. The emacs user does not have a problem what with C-x r k (rectangle delete) and all, still it would be nice on the reader. Thanks for amazing org. Saptarshi Guha On Thu, Mar 12, 2009 at 12:28 AM, Saptarshi Guha <saptarshi.guha@gmail.com> wrote: > Ok. I'll update. > Thanks > > Saptarshi Guha > > > > On Thu, Mar 12, 2009 at 12:25 AM, Manish <mailtomanish.sharma@gmail.com> wrote: >> On Thu, Mar 12, 2009 at 9:25 AM, Saptarshi Guha wrote: >>> Thank you, quite excited I tried this small org file >>> *Title >>> Some tex >>> >>> #+BEGIN_SRC emacs-lisp -n >>> (save-excursion >>> (goto-char (point-min)) >>> #+END_SRC >>> >>> Only to get this in the html file (as copied from my browser): >>> >>> (save-excursion (goto-char (point-min)) >>> >>> The corresponding html is >>> <p>(save-excursion >>> (goto-char (point-min)) >>> </p> >>> >>> if i remove the -n it works - the exported code is formatted but no >>> line numbers. >>> (org version 6.09a) >> >> Line numbers and references were added in 6.17. >> >> -- >> Manish >> > ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Code with line numbers in HTML export 2009-03-12 4:41 ` Saptarshi Guha @ 2009-03-12 7:14 ` Carsten Dominik 2009-03-12 13:41 ` Saptarshi Guha 0 siblings, 1 reply; 10+ messages in thread From: Carsten Dominik @ 2009-03-12 7:14 UTC (permalink / raw) To: saptarshi.guha; +Cc: emacs-orgmode On Mar 12, 2009, at 5:41 AM, Saptarshi Guha wrote: > Lovely. One last question, is there a way to place the source in a > table of two cols one for the col numbers and one for the code? So > that the reader may easily select the code. > The emacs user does not have a problem what with C-x r k (rectangle > delete) and all, still it would be nice on the reader. Hi, how does one select a column in an HTML table? When I try this, it is always entire rows that are being selected, so I would not know how to make a table where this works correctly. - Carsten > > Thanks for amazing org. > Saptarshi Guha > > > > On Thu, Mar 12, 2009 at 12:28 AM, Saptarshi Guha > <saptarshi.guha@gmail.com> wrote: >> Ok. I'll update. >> Thanks >> >> Saptarshi Guha >> >> >> >> On Thu, Mar 12, 2009 at 12:25 AM, Manish <mailtomanish.sharma@gmail.com >> > wrote: >>> On Thu, Mar 12, 2009 at 9:25 AM, Saptarshi Guha wrote: >>>> Thank you, quite excited I tried this small org file >>>> *Title >>>> Some tex >>>> >>>> #+BEGIN_SRC emacs-lisp -n >>>> (save-excursion >>>> (goto-char (point-min)) >>>> #+END_SRC >>>> >>>> Only to get this in the html file (as copied from my browser): >>>> >>>> (save-excursion (goto-char (point-min)) >>>> >>>> The corresponding html is >>>> <p>(save-excursion >>>> (goto-char (point-min)) >>>> </p> >>>> >>>> if i remove the -n it works - the exported code is formatted but no >>>> line numbers. >>>> (org version 6.09a) >>> >>> Line numbers and references were added in 6.17. >>> >>> -- >>> Manish >>> >> > > > _______________________________________________ > Emacs-orgmode mailing list > Remember: use `Reply All' to send replies to the list. > Emacs-orgmode@gnu.org > http://lists.gnu.org/mailman/listinfo/emacs-orgmode ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Code with line numbers in HTML export 2009-03-12 7:14 ` Carsten Dominik @ 2009-03-12 13:41 ` Saptarshi Guha 2009-03-12 15:03 ` Sebastian Rose 0 siblings, 1 reply; 10+ messages in thread From: Saptarshi Guha @ 2009-03-12 13:41 UTC (permalink / raw) To: emacs-orgmode Hello, I got this idea from Google code. An example can be found here (chosen at random) http://code.google.com/p/compcache/source/browse/trunk/compcache.c The code is displayed as a table (albeit with lots of css markup helping it) yet the source column is selectable. Hope it helps. Thanks Saptarshi Guha On Thu, Mar 12, 2009 at 3:14 AM, Carsten Dominik <dominik@science.uva.nl> wrote: > > On Mar 12, 2009, at 5:41 AM, Saptarshi Guha wrote: > >> Lovely. One last question, is there a way to place the source in a >> table of two cols one for the col numbers and one for the code? So >> that the reader may easily select the code. >> The emacs user does not have a problem what with C-x r k (rectangle >> delete) and all, still it would be nice on the reader. > > Hi, > > how does one select a column in an HTML table? > When I try this, it is always entire rows that are being selected, > so I would not know how to make a table where this works correctly. > > - Carsten > >> >> Thanks for amazing org. >> Saptarshi Guha >> >> >> >> On Thu, Mar 12, 2009 at 12:28 AM, Saptarshi Guha >> <saptarshi.guha@gmail.com> wrote: >>> >>> Ok. I'll update. >>> Thanks >>> >>> Saptarshi Guha >>> >>> >>> >>> On Thu, Mar 12, 2009 at 12:25 AM, Manish <mailtomanish.sharma@gmail.com> >>> wrote: >>>> >>>> On Thu, Mar 12, 2009 at 9:25 AM, Saptarshi Guha wrote: >>>>> >>>>> Thank you, quite excited I tried this small org file >>>>> *Title >>>>> Some tex >>>>> >>>>> #+BEGIN_SRC emacs-lisp -n >>>>> (save-excursion >>>>> (goto-char (point-min)) >>>>> #+END_SRC >>>>> >>>>> Only to get this in the html file (as copied from my browser): >>>>> >>>>> (save-excursion (goto-char (point-min)) >>>>> >>>>> The corresponding html is >>>>> <p>(save-excursion >>>>> (goto-char (point-min)) >>>>> </p> >>>>> >>>>> if i remove the -n it works - the exported code is formatted but no >>>>> line numbers. >>>>> (org version 6.09a) >>>> >>>> Line numbers and references were added in 6.17. >>>> >>>> -- >>>> Manish >>>> >>> >> >> >> _______________________________________________ >> Emacs-orgmode mailing list >> Remember: use `Reply All' to send replies to the list. >> Emacs-orgmode@gnu.org >> http://lists.gnu.org/mailman/listinfo/emacs-orgmode > > ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Code with line numbers in HTML export 2009-03-12 13:41 ` Saptarshi Guha @ 2009-03-12 15:03 ` Sebastian Rose 0 siblings, 0 replies; 10+ messages in thread From: Sebastian Rose @ 2009-03-12 15:03 UTC (permalink / raw) To: saptarshi.guha; +Cc: emacs-orgmode It's not just putting line numbers and code into two <td> elements. Putting line-numbers and code into different columns works and is done everywhere, but in Org's this will not be bullet-proof. This depends heavily on styles use for the CSS-classes in the code and the line-numbers. If one defines bigger (or smaller) fonts for some of the classes on the code side, line-numbers and code will get out of sync. 1: line 1, normal font size only 2: line 2 contains bigger fonts 3: 4: this is line 3 of code.... Actually, it will even look worse, because the lines will be gradually get out of sync. Not sure, if it could even go out of sync when just different fonts are used. The default line-height is 1.2 em which in turn depends on the font I believe. Hence we would have to put every line number and every code line into <div> elements with a certain height. The next problem would be, that we suddenly can't copy the example _with_ line numbers anymore ;-) Saptarshi Guha <saptarshi.guha@gmail.com> writes: > Hello, > I got this idea from Google code. An example can be found here (chosen > at random) > > http://code.google.com/p/compcache/source/browse/trunk/compcache.c > > The code is displayed as a table (albeit with lots of css markup > helping it) yet the source column is selectable. Hope it helps. Perhaps this is a candidate for org-export-blocks.el or some extension based on it? Regards, Sebastian > Thanks > Saptarshi Guha > > > > On Thu, Mar 12, 2009 at 3:14 AM, Carsten Dominik <dominik@science.uva.nl> wrote: >> >> On Mar 12, 2009, at 5:41 AM, Saptarshi Guha wrote: >> >>> Lovely. One last question, is there a way to place the source in a >>> table of two cols one for the col numbers and one for the code? So >>> that the reader may easily select the code. >>> The emacs user does not have a problem what with C-x r k (rectangle >>> delete) and all, still it would be nice on the reader. >> >> Hi, >> >> how does one select a column in an HTML table? >> When I try this, it is always entire rows that are being selected, >> so I would not know how to make a table where this works correctly. >> >> - Carsten >> >>> >>> Thanks for amazing org. >>> Saptarshi Guha >>> >>> >>> >>> On Thu, Mar 12, 2009 at 12:28 AM, Saptarshi Guha >>> <saptarshi.guha@gmail.com> wrote: >>>> >>>> Ok. I'll update. >>>> Thanks >>>> >>>> Saptarshi Guha >>>> >>>> >>>> >>>> On Thu, Mar 12, 2009 at 12:25 AM, Manish <mailtomanish.sharma@gmail.com> >>>> wrote: >>>>> >>>>> On Thu, Mar 12, 2009 at 9:25 AM, Saptarshi Guha wrote: >>>>>> >>>>>> Thank you, quite excited I tried this small org file >>>>>> *Title >>>>>> Some tex >>>>>> >>>>>> #+BEGIN_SRC emacs-lisp -n >>>>>> (save-excursion >>>>>> (goto-char (point-min)) >>>>>> #+END_SRC >>>>>> >>>>>> Only to get this in the html file (as copied from my browser): >>>>>> >>>>>> (save-excursion (goto-char (point-min)) >>>>>> >>>>>> The corresponding html is >>>>>> <p>(save-excursion >>>>>> (goto-char (point-min)) >>>>>> </p> >>>>>> >>>>>> if i remove the -n it works - the exported code is formatted but no >>>>>> line numbers. >>>>>> (org version 6.09a) >>>>> >>>>> Line numbers and references were added in 6.17. >>>>> >>>>> -- >>>>> Manish >>>>> >>>> >>> >>> >>> _______________________________________________ >>> Emacs-orgmode mailing list >>> Remember: use `Reply All' to send replies to the list. >>> Emacs-orgmode@gnu.org >>> http://lists.gnu.org/mailman/listinfo/emacs-orgmode >> >> > > > _______________________________________________ > Emacs-orgmode mailing list > Remember: use `Reply All' to send replies to the list. > Emacs-orgmode@gnu.org > http://lists.gnu.org/mailman/listinfo/emacs-orgmode > -- Sebastian Rose, EMMA STIL - mediendesign, Niemeyerstr.6, 30449 Hannover Tel.: +49 (0)511 - 36 58 472 Fax: +49 (0)1805 - 233633 - 11044 mobil: +49 (0)173 - 83 93 417 Email: s.rose@emma-stil.de, sebastian_rose@gmx.de Http: www.emma-stil.de ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Code with line numbers in HTML export 2009-03-12 3:55 ` Saptarshi Guha 2009-03-12 4:25 ` Manish @ 2009-03-12 14:03 ` Nick Dokos 1 sibling, 0 replies; 10+ messages in thread From: Nick Dokos @ 2009-03-12 14:03 UTC (permalink / raw) To: saptarshi.guha; +Cc: emacs-orgmode Saptarshi Guha <saptarshi.guha@gmail.com> wrote: > Thank you, quite excited I tried this small org file > *Title > Some tex > > #+BEGIN_SRC emacs-lisp -n > (save-excursion > (goto-char (point-min)) > #+END_SRC > > Only to get this in the html file (as copied from my browser): > > (save-excursion (goto-char (point-min)) > > The corresponding html is > <p>(save-excursion > (goto-char (point-min)) > </p> > > if i remove the -n it works - the exported code is formatted but no > line numbers. > (org version 6.09a) I don't know when -n was added, but I use Org-mode version 6.24 and it worked for me (I did have a transient htmlize error about an unknown face, but it went away on its own - I have no idea how). Try upgrading. Nick ^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2009-03-12 15:00 UTC | newest] Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2009-03-12 0:37 Code with line numbers in HTML export Saptarshi Guha 2009-03-12 2:29 ` Nick Dokos 2009-03-12 3:55 ` Saptarshi Guha 2009-03-12 4:25 ` Manish 2009-03-12 4:28 ` Saptarshi Guha 2009-03-12 4:41 ` Saptarshi Guha 2009-03-12 7:14 ` Carsten Dominik 2009-03-12 13:41 ` Saptarshi Guha 2009-03-12 15:03 ` Sebastian Rose 2009-03-12 14:03 ` Nick Dokos
Code repositories for project(s) associated with this public inbox https://git.savannah.gnu.org/cgit/emacs/org-mode.git This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).