* Build issue with latest git version - org-crypt.el
@ 2009-09-16 18:46 Mark Elston
2009-09-16 21:39 ` Peter Jones
0 siblings, 1 reply; 7+ messages in thread
From: Mark Elston @ 2009-09-16 18:46 UTC (permalink / raw)
To: Org Mode List
Not so much a problem as an unexpected issue.
I read Eric's message about updating org-asymptote.el today
and thought I would get the latest to get this fix. When I
went through the process of building I found it failed at the
org-crypt file since I didn't have epg.el on my system.
I found a copy of this file and thought I would try it and
see if that fixed the problem. Alas, no. It is part of a
bigger package - epa.
So I found this and tried to build/install it. Oops. it
requires gpg to be installed to build it.
Fortunately, this is distributed with pre-compiled binaries
for Windows so installing it and modifying makefiles was
pretty simple to build epa. I got that installed and
modified the makefile for org-mode so it can be found and
I am back up and running.
I also managed to do the same thing by deleting the org-crypt.el
line from the LISPF entry in the makefile. Either would work for
me since I don't expect to use org-crypt regularly. I went
through the above steps because I thought I might actually try
to play around with it for a while and see if it was of any
use to me.
However, for those who won't be using org-crypt as a normal
part of their daily operation it is probably simpler to make
the build/installation of org-crypt optional. That way the
normal maintenance for those who do "simple" things stays,
uh, simple.
Mark
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Build issue with latest git version - org-crypt.el
2009-09-16 18:46 Build issue with latest git version - org-crypt.el Mark Elston
@ 2009-09-16 21:39 ` Peter Jones
2009-09-16 23:14 ` Carsten Dominik
0 siblings, 1 reply; 7+ messages in thread
From: Peter Jones @ 2009-09-16 21:39 UTC (permalink / raw)
To: emacs-orgmode
Mark Elston <m_elston@comcast.net> writes:
> However, for those who won't be using org-crypt as a normal
> part of their daily operation it is probably simpler to make
> the build/installation of org-crypt optional. That way the
> normal maintenance for those who do "simple" things stays,
> uh, simple.
I also think that org-crypt should be optional, or at least put in the
contrib directory. I didn't realize it was going to cause build issues.
That said, here is a patch for the Makefile so I could build the latest
org-mode:
diff --git a/Makefile b/Makefile
index f1b541b..085951d 100644
--- a/Makefile
+++ b/Makefile
@@ -30,6 +30,7 @@ infodir = $(prefix)/share/info
BATCH=$(EMACS) -batch -q -no-site-file -eval \
"(progn (add-to-list (quote load-path) \"$(lispdir)\") \
+ (add-to-list (quote load-path) \"$(lispdir)/epg\") \
(add-to-list (quote load-path) (expand-file-name \"./lisp/\")))"
# Specify the byte-compiler for compiling org-mode files
--
Peter Jones - 303-219-0226
pmade inc. - http://pmade.com
^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: Re: Build issue with latest git version - org-crypt.el
2009-09-16 21:39 ` Peter Jones
@ 2009-09-16 23:14 ` Carsten Dominik
2009-09-16 23:25 ` Mark Elston
2009-09-17 6:19 ` Ian Barton
0 siblings, 2 replies; 7+ messages in thread
From: Carsten Dominik @ 2009-09-16 23:14 UTC (permalink / raw)
To: Peter Jones; +Cc: emacs-orgmode
On Sep 16, 2009, at 10:39 PM, Peter Jones wrote:
> Mark Elston <m_elston@comcast.net> writes:
>> However, for those who won't be using org-crypt as a normal
>> part of their daily operation it is probably simpler to make
>> the build/installation of org-crypt optional. That way the
>> normal maintenance for those who do "simple" things stays,
>> uh, simple.
>
> I also think that org-crypt should be optional, or at least put in the
> contrib directory. I didn't realize it was going to cause build
> issues.
>
> That said, here is a patch for the Makefile so I could build the
> latest
> org-mode:
>
> diff --git a/Makefile b/Makefile
> index f1b541b..085951d 100644
> --- a/Makefile
> +++ b/Makefile
> @@ -30,6 +30,7 @@ infodir = $(prefix)/share/info
>
> BATCH=$(EMACS) -batch -q -no-site-file -
> eval \
> "(progn (add-to-list (quote load-path) \"$(lispdir)\") \
> + (add-to-list (quote load-path) \"$(lispdir)/epg\") \
> (add-to-list (quote load-path) (expand-file-name \"./lisp/\")))"
>
> # Specify the byte-compiler for compiling org-mode files
epg is not part of older versions of Emacs, look like mark is using
Emacs 22?
I have changed org-crypt.el so that it will compile without loading epg.
So an error will only happen if anyone actually uses it.
- Carsten
>
> --
> Peter Jones - 303-219-0226
> pmade inc. - http://pmade.com
>
>
>
> _______________________________________________
> Emacs-orgmode mailing list
> Remember: use `Reply All' to send replies to the list.
> Emacs-orgmode@gnu.org
> http://lists.gnu.org/mailman/listinfo/emacs-orgmode
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Re: Build issue with latest git version - org-crypt.el
2009-09-16 23:14 ` Carsten Dominik
@ 2009-09-16 23:25 ` Mark Elston
2009-09-17 6:19 ` Ian Barton
1 sibling, 0 replies; 7+ messages in thread
From: Mark Elston @ 2009-09-16 23:25 UTC (permalink / raw)
To: emacs-orgmode
Carsten Dominik wrote:
>
> epg is not part of older versions of Emacs, look like mark is using
> Emacs 22?
Yeah. 22.3.1. I tried 23 some time ago and had problems with some
of the packages I used routinely (I forget which ones right now). So
I gave it up. It was also a real hassle maintaining two separate
personal 'site-lisp' hierarchies...
Maybe its time to try it again.
> I have changed org-crypt.el so that it will compile without loading epg.
> So an error will only happen if anyone actually uses it.
Thanks.
Mark
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Re: Build issue with latest git version - org-crypt.el
2009-09-16 23:14 ` Carsten Dominik
2009-09-16 23:25 ` Mark Elston
@ 2009-09-17 6:19 ` Ian Barton
2009-09-17 6:59 ` Carsten Dominik
1 sibling, 1 reply; 7+ messages in thread
From: Ian Barton @ 2009-09-17 6:19 UTC (permalink / raw)
Cc: emacs-orgmode
>> Mark Elston <m_elston@comcast.net> writes:
>>> However, for those who won't be using org-crypt as a normal
>>> part of their daily operation it is probably simpler to make
>>> the build/installation of org-crypt optional. That way the
>>> normal maintenance for those who do "simple" things stays,
>>> uh, simple.
>>
>> I also think that org-crypt should be optional, or at least put in the
>> contrib directory. I didn't realize it was going to cause build issues.
>>
>> That said, here is a patch for the Makefile so I could build the latest
>> org-mode:
>>
>> diff --git a/Makefile b/Makefile
>> index f1b541b..085951d 100644
>> --- a/Makefile
>> +++ b/Makefile
>> @@ -30,6 +30,7 @@ infodir = $(prefix)/share/info
>>
>> BATCH=$(EMACS) -batch -q -no-site-file
>> -eval \
>> "(progn (add-to-list (quote load-path) \"$(lispdir)\") \
>> + (add-to-list (quote load-path) \"$(lispdir)/epg\") \
>> (add-to-list (quote load-path) (expand-file-name \"./lisp/\")))"
>>
>> # Specify the byte-compiler for compiling org-mode files
>
> epg is not part of older versions of Emacs, look like mark is using
> Emacs 22?
> I have changed org-crypt.el so that it will compile without loading epg.
> So an error will only happen if anyone actually uses it.
>
I am still getting this problem with the latest git version:
emacs -batch -q -no-site-file -eval "(progn (add-to-list (quote
load-path) \"~/.emacs-lisp/org\") (add-to-list (quote load-path)
(expand-file-name \"./lisp/\")))" -f batch-byte-compile lisp/org-crypt.el
In toplevel form:
lisp/org-crypt.el:69:1:Error: Cannot open load file: epg
make: *** [lisp/org-crypt.elc] Error 1
I have both emacs 22 and emacs 23 (the Ubuntu packages installed). I
removed the easypg package for emacs 22 because it conflicts with the
built in support for gpg in emacs 23.
I assume my problem is caused by having both emacs 22 and 23 installed.
Ian.
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Re: Build issue with latest git version - org-crypt.el
2009-09-17 6:19 ` Ian Barton
@ 2009-09-17 6:59 ` Carsten Dominik
2009-09-17 7:14 ` Ian Barton
0 siblings, 1 reply; 7+ messages in thread
From: Carsten Dominik @ 2009-09-17 6:59 UTC (permalink / raw)
To: lists; +Cc: emacs-orgmode
I forgot to push, did it now...
- Carsten
On Sep 17, 2009, at 7:19 AM, Ian Barton wrote:
>
>>> Mark Elston <m_elston@comcast.net> writes:
>>>> However, for those who won't be using org-crypt as a normal
>>>> part of their daily operation it is probably simpler to make
>>>> the build/installation of org-crypt optional. That way the
>>>> normal maintenance for those who do "simple" things stays,
>>>> uh, simple.
>>>
>>> I also think that org-crypt should be optional, or at least put in
>>> the
>>> contrib directory. I didn't realize it was going to cause build
>>> issues.
>>>
>>> That said, here is a patch for the Makefile so I could build the
>>> latest
>>> org-mode:
>>>
>>> diff --git a/Makefile b/Makefile
>>> index f1b541b..085951d 100644
>>> --- a/Makefile
>>> +++ b/Makefile
>>> @@ -30,6 +30,7 @@ infodir = $(prefix)/share/info
>>>
>>> BATCH=$(EMACS) -batch -q -no-site-file -
>>> eval \
>>> "(progn (add-to-list (quote load-path) \"$(lispdir)\") \
>>> + (add-to-list (quote load-path) \"$(lispdir)/epg\") \
>>> (add-to-list (quote load-path) (expand-file-name \"./lisp/
>>> \")))"
>>>
>>> # Specify the byte-compiler for compiling org-mode files
>> epg is not part of older versions of Emacs, look like mark is using
>> Emacs 22?
>> I have changed org-crypt.el so that it will compile without loading
>> epg.
>> So an error will only happen if anyone actually uses it.
>
> I am still getting this problem with the latest git version:
>
> emacs -batch -q -no-site-file -eval "(progn (add-to-list (quote load-
> path) \"~/.emacs-lisp/org\") (add-to-list (quote load-path) (expand-
> file-name \"./lisp/\")))" -f batch-byte-compile lisp/org-crypt.el
>
> In toplevel form:
> lisp/org-crypt.el:69:1:Error: Cannot open load file: epg
> make: *** [lisp/org-crypt.elc] Error 1
>
> I have both emacs 22 and emacs 23 (the Ubuntu packages installed). I
> removed the easypg package for emacs 22 because it conflicts with
> the built in support for gpg in emacs 23.
>
> I assume my problem is caused by having both emacs 22 and 23
> installed.
>
> Ian.
>
>
> _______________________________________________
> Emacs-orgmode mailing list
> Remember: use `Reply All' to send replies to the list.
> Emacs-orgmode@gnu.org
> http://lists.gnu.org/mailman/listinfo/emacs-orgmode
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2009-09-17 7:50 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2009-09-16 18:46 Build issue with latest git version - org-crypt.el Mark Elston
2009-09-16 21:39 ` Peter Jones
2009-09-16 23:14 ` Carsten Dominik
2009-09-16 23:25 ` Mark Elston
2009-09-17 6:19 ` Ian Barton
2009-09-17 6:59 ` Carsten Dominik
2009-09-17 7:14 ` Ian Barton
Code repositories for project(s) associated with this public inbox
https://git.savannah.gnu.org/cgit/emacs/org-mode.git
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).