emacs-orgmode@gnu.org archives
 help / color / mirror / code / Atom feed
* Using Emacs, Org-mode and R for Research Writing in Social Sciences
@ 2014-05-12 12:57 Vikas Rawal
  2014-05-12 13:26 ` Suvayu Ali
                   ` (2 more replies)
  0 siblings, 3 replies; 26+ messages in thread
From: Vikas Rawal @ 2014-05-12 12:57 UTC (permalink / raw)
  To: org-mode mailing list

I have been using Org for writing research papers for a while, gradually improving my set up to be able to exactly produce the output I want. In this process, I have benefited greatly not only from the resources available on the Org-mode website but also from various people who generously provided solutions to my numerous queries on this mailing list. I felt that it may be of some use if I put together all the pieces and document what I was doing.

I have put the draft for comments at: https://github.com/vikasrawal/orgpaper/blob/master/orgpapers.org

It has been written keeping in mind my graduate students as examples of potential beneficiaries of the documentation. Which means that I had somewhat specific requirements in mind. Also, I have tried to write it for somebody who is not familiar with emacs/org-mode and would like to start using the system before investing time in learning the nitty-gritties. That is how I have always managed to entice my students to using free software. I give them a working setup that they can use, and slowly help them learn the insides of it. So the focus is not to provide all the possible options and different ways of customising the output but to provide a specific usable solution. 

For whatever it is worth, here it is. Pointers to any errors as well as  comments for improving it would be greatly appreciated. Also, I would be happy to contribute it to Worg, if people consider it useful.

With thanks to the Org community,

Vikas

^ permalink raw reply	[flat|nested] 26+ messages in thread

* Re: Using Emacs, Org-mode and R for Research Writing in Social Sciences
  2014-05-12 12:57 Using Emacs, Org-mode and R for Research Writing in Social Sciences Vikas Rawal
@ 2014-05-12 13:26 ` Suvayu Ali
  2014-05-12 19:36   ` Vikas Rawal
  2014-05-13 18:01 ` Eric S Fraga
  2014-05-14 14:07 ` Using Emacs, Org-mode and R for Research Writing in Social Sciences Axel Kielhorn
  2 siblings, 1 reply; 26+ messages in thread
From: Suvayu Ali @ 2014-05-12 13:26 UTC (permalink / raw)
  To: emacs-orgmode

Hi Vikas,

On Mon, May 12, 2014 at 02:57:19PM +0200, Vikas Rawal wrote:
> 
> I have put the draft for comments at: https://github.com/vikasrawal/orgpaper/blob/master/orgpapers.org

Firstly a thank you for writing it.  I gave it a quick cursory glance,
seems nice and thorough, and very appropriate for your target
audience :).

> For whatever it is worth, here it is. Pointers to any errors as well
> as comments for improving it would be greatly appreciated. Also, I
> would be happy to contribute it to Worg, if people consider it useful.

Some comments: at places it seemed a bit too verbose, e.g. when you are
introducing some idea/technique.  I think it would be nice if you could
make it a bit more concise.  I also noticed a few things in the
formatting that looked LaTeX specific; e.g. \FloatBarrier after the
table on keybindings.  If you intend to include this in Worg, I think
you should remove these.  In fact you can explicitly target html.

That's it for now :).

Cheers,

-- 
Suvayu

Open source is the future. It sets us free.

^ permalink raw reply	[flat|nested] 26+ messages in thread

* Re: Using Emacs, Org-mode and R for Research Writing in Social Sciences
  2014-05-12 13:26 ` Suvayu Ali
@ 2014-05-12 19:36   ` Vikas Rawal
  2014-05-12 21:00     ` Thomas S. Dye
  0 siblings, 1 reply; 26+ messages in thread
From: Vikas Rawal @ 2014-05-12 19:36 UTC (permalink / raw)
  To: org-mode mailing list

> 
>> For whatever it is worth, here it is. Pointers to any errors as well
>> as comments for improving it would be greatly appreciated. Also, I
>> would be happy to contribute it to Worg, if people consider it useful.
> 
> Some comments: at places it seemed a bit too verbose, e.g. when you are
> introducing some idea/technique.  I think it would be nice if you could
> make it a bit more concise.  

Did you miss “social sciences” in the title :)

Jokes apart, will try to look at the text and improve as much as I can. Specific suggestions welcome.

> I also noticed a few things in the
> formatting that looked LaTeX specific; e.g. \FloatBarrier after the
> table on keybindings.  If you intend to include this in Worg, I think
> you should remove these.  In fact you can explicitly target html.
> 

Thanks. \FloatBarrier gone. Also done a few other fixes.

Looking forward to further comments.

Best,

Vikas

^ permalink raw reply	[flat|nested] 26+ messages in thread

* Re: Using Emacs, Org-mode and R for Research Writing in Social Sciences
  2014-05-12 19:36   ` Vikas Rawal
@ 2014-05-12 21:00     ` Thomas S. Dye
  2014-05-13 17:48       ` Vikas Rawal
  0 siblings, 1 reply; 26+ messages in thread
From: Thomas S. Dye @ 2014-05-12 21:00 UTC (permalink / raw)
  To: Vikas Rawal; +Cc: org-mode mailing list

Aloha Vikas,

Very nice!

Your document overlaps and updates the LaTeX export tutorial on Worg
that I wrote for the old exporter.  Perhaps it could be revised to
replace the old export tutorial?

Just a thought.

All the best,
Tom

Vikas Rawal <vikaslists@agrarianresearch.org> writes:

>> 
>>> For whatever it is worth, here it is. Pointers to any errors as well
>>> as comments for improving it would be greatly appreciated. Also, I
>>> would be happy to contribute it to Worg, if people consider it useful.
>> 
>> Some comments: at places it seemed a bit too verbose, e.g. when you are
>> introducing some idea/technique.  I think it would be nice if you could
>> make it a bit more concise.  
>
> Did you miss “social sciences” in the title :)
>
> Jokes apart, will try to look at the text and improve as much as I
> can. Specific suggestions welcome.
>
>> I also noticed a few things in the
>> formatting that looked LaTeX specific; e.g. \FloatBarrier after the
>> table on keybindings.  If you intend to include this in Worg, I think
>> you should remove these.  In fact you can explicitly target html.
>> 
>
> Thanks. \FloatBarrier gone. Also done a few other fixes.
>
> Looking forward to further comments.
>
> Best,
>
> Vikas
>

-- 
Thomas S. Dye
http://www.tsdye.com

^ permalink raw reply	[flat|nested] 26+ messages in thread

* Re: Using Emacs, Org-mode and R for Research Writing in Social Sciences
  2014-05-12 21:00     ` Thomas S. Dye
@ 2014-05-13 17:48       ` Vikas Rawal
  2014-05-13 18:15         ` John Hendy
  2014-05-13 19:55         ` Thomas S. Dye
  0 siblings, 2 replies; 26+ messages in thread
From: Vikas Rawal @ 2014-05-13 17:48 UTC (permalink / raw)
  To: org-mode mailing list



> Aloha Vikas,
> 
> Very nice!
> 
> Your document overlaps and updates the LaTeX export tutorial on Worg
> that I wrote for the old exporter.  Perhaps it could be revised to
> replace the old export tutorial?

There is some overlap. But I think there is a considerable utility in addressing people who would need to be taken from installation of emacs to production of a full document. 

That is, people start using a workable solution, and then go to more detailed documentation to modify it to their needs and to learn rest of the stuff that you can do with Org.

I could, however, tweak it specifically for Worg depending on what is considered most appropriate for Worg. 

Vikas

^ permalink raw reply	[flat|nested] 26+ messages in thread

* Re: Using Emacs, Org-mode and R for Research Writing in Social Sciences
  2014-05-12 12:57 Using Emacs, Org-mode and R for Research Writing in Social Sciences Vikas Rawal
  2014-05-12 13:26 ` Suvayu Ali
@ 2014-05-13 18:01 ` Eric S Fraga
  2014-05-13 18:52   ` Vikas Rawal
  2014-05-14 14:07 ` Using Emacs, Org-mode and R for Research Writing in Social Sciences Axel Kielhorn
  2 siblings, 1 reply; 26+ messages in thread
From: Eric S Fraga @ 2014-05-13 18:01 UTC (permalink / raw)
  To: Vikas Rawal; +Cc: org-mode mailing list

On Monday, 12 May 2014 at 14:57, Vikas Rawal wrote:
> I have been using Org for writing research papers for a while,
> gradually improving my set up to be able to exactly produce the output
> I want. In this process, I have benefited greatly not only from the
> resources available on the Org-mode website but also from various
> people who generously provided solutions to my numerous queries on
> this mailing list. I felt that it may be of some use if I put together
> all the pieces and document what I was doing.
>
> I have put the draft for comments at: https://github.com/vikasrawal/orgpaper/blob/master/orgpapers.org

Thanks for this.  I circulated it to my research group yesterday and I
hope it convinces some to try.

From my perspective, I must say:  thank you, thank you, thank you!

You mentioning pandoc as one of the tools to use made me finally sit
down and look at it.  I am very glad I did.  Just today, I started
working on a paper that has to be in Word format in the end.  This is
always annoying but especially when the paper has mathematics in
it.  And this one does.  I learned that pandoc exports latex to odt and
docx including the conversion of equations.  I had not been aware of
this.  This is a real time saver so thank you again!

For me, org export to latex followed by pandoc to docx will be my
preferred route when I need to create Word documents (which luckily is
not that often), rather than using org's export to odt.

-- 
: Eric S Fraga (0xFFFCF67D), Emacs 24.4.50.2, Org release_8.2.6-958-g7c8559-git

^ permalink raw reply	[flat|nested] 26+ messages in thread

* Re: Using Emacs, Org-mode and R for Research Writing in Social Sciences
  2014-05-13 17:48       ` Vikas Rawal
@ 2014-05-13 18:15         ` John Hendy
  2014-05-13 18:40           ` Vikas Rawal
  2014-05-13 19:55         ` Thomas S. Dye
  1 sibling, 1 reply; 26+ messages in thread
From: John Hendy @ 2014-05-13 18:15 UTC (permalink / raw)
  To: Vikas Rawal; +Cc: org-mode mailing list

On Tue, May 13, 2014 at 12:48 PM, Vikas Rawal
<vikaslists@agrarianresearch.org> wrote:
>
>
>> Aloha Vikas,
>>
>> Very nice!
>>
>> Your document overlaps and updates the LaTeX export tutorial on Worg
>> that I wrote for the old exporter.  Perhaps it could be revised to
>> replace the old export tutorial?
>
> There is some overlap. But I think there is a considerable utility in addressing people who would need to be taken from installation of emacs to production of a full document.

My 0.02 cents on this. As someone who often leans quite far toward the
verbose/thorough end of the spectrum, I completely relate to this
sentiment. That said, I've come to believe it's sub-optimal. With this
approach, what ends up happening is:
- Multiple versions of the same information proliferate (we're
re-doing each other's work)
- Similarly, there's more information to update down the road
- While excellent/to-your-best-knowledge, the instructions you provide
might not be the best ones

Thus, I've started to believe how you approached the initial sections
(install Emacs, R, Org) are better. A sentence or two, with a link to
do the thing you're telling them to do. While it probably /won't/
happen (at least with the vast majority of those options), what if
this page changes?
- http://orgmode.org/manual/Export-settings.html

You now have to update your table of various options as well. Even
without that... I'm no longer convinced of the benefits of re-writing
existing documentation for the sake of an all-in-one information
source, unless it's a book (meant to be standalone).

It seems safer/efficient to focus on making modular documentation that
is the definitive *best*/*right* way (and *best* explained) to do
something, and then to link to that prolifically.

This feels horrible to write, as your document looks awesome. You did
ask for feedback, and things migrated toward this area, so I wanted to
flesh out why I think one might steer toward one approach vs. another.

That said, as long as it isn't incorrect... more documentation is
still almost always better to increase the probability of finding the
right hit on Google, so thanks a ton for your contribution and effort
to help others.


Best regards,
John

>
> That is, people start using a workable solution, and then go to more detailed documentation to modify it to their needs and to learn rest of the stuff that you can do with Org.
>
> I could, however, tweak it specifically for Worg depending on what is considered most appropriate for Worg.
>
> Vikas
>
>

^ permalink raw reply	[flat|nested] 26+ messages in thread

* Re: Using Emacs, Org-mode and R for Research Writing in Social Sciences
  2014-05-13 18:15         ` John Hendy
@ 2014-05-13 18:40           ` Vikas Rawal
  2014-05-14 14:19             ` Suvayu Ali
  0 siblings, 1 reply; 26+ messages in thread
From: Vikas Rawal @ 2014-05-13 18:40 UTC (permalink / raw)
  To: John Hendy; +Cc: org-mode mailing list

> 
> It seems safer/efficient to focus on making modular documentation that
> is the definitive *best*/*right* way (and *best* explained) to do
> something, and then to link to that prolifically.
> 

Your points are very valid and expressed convincingly. 

Writing this document was a result of, first and foremost, a personal urge to write it, and secondly, in view of very specific use cases (my graduate students, to whom I wanted to provide a one-stop shop, before they explore rest of the stuff).

That said, your arguments that it is not optimal to include such a document as part of documentation on orgmode.org is perhaps right. I can see that maintaining modular non-repetitive content is easier. Long-term maintenance of documentation should be an important concern for something that is under heavy development. 

Unless others feel differently, I would let the document float around the cyberspace, on my personal website and on github, for anyone to discover and use.

Thanks for your very reasonable comments. 

Vikas

^ permalink raw reply	[flat|nested] 26+ messages in thread

* Re: Using Emacs, Org-mode and R for Research Writing in Social Sciences
  2014-05-13 18:01 ` Eric S Fraga
@ 2014-05-13 18:52   ` Vikas Rawal
  2014-05-14  3:38     ` Using Emacs, Org-mode and R for Research Writing in Social Sciencess Ken Mankoff
  0 siblings, 1 reply; 26+ messages in thread
From: Vikas Rawal @ 2014-05-13 18:52 UTC (permalink / raw)
  To: Eric S Fraga, org-mode mailing list

> 
> You mentioning pandoc as one of the tools to use made me finally sit
> down and look at it.  I am very glad I did.  Just today, I started
> working on a paper that has to be in Word format in the end.  This is
> always annoying but especially when the paper has mathematics in
> it.

I have been totally addicted to Org-mode, and find it absurd to write in Word. On the other hand, none of my collaborators use LaTeX or Org. For a long time, I produced PDFs, circulated them, and then in the end, when others had to work on the document, bit my lip and converted it painfully to Word, manually fixing all LaTeX-specific stuff.

Pandoc is a treat and clearly the way to go, at least until development of odt exporter catches up. 

Am glad you found the document useful. If you have any feedback from your group, particularly on parts that you would think need improvement, do share them with me.

Vikas

^ permalink raw reply	[flat|nested] 26+ messages in thread

* Re: Using Emacs, Org-mode and R for Research Writing in Social Sciences
  2014-05-13 17:48       ` Vikas Rawal
  2014-05-13 18:15         ` John Hendy
@ 2014-05-13 19:55         ` Thomas S. Dye
  1 sibling, 0 replies; 26+ messages in thread
From: Thomas S. Dye @ 2014-05-13 19:55 UTC (permalink / raw)
  To: Vikas Rawal; +Cc: org-mode mailing list

Aloha Vikas,

Vikas Rawal <vikaslists@agrarianresearch.org> writes:

> There is some overlap. But I think there is a considerable utility in
> addressing people who would need to be taken from installation of
> emacs to production of a full document.

I'm in complete agreement here and hope you didn't read some criticism
into my earlier comment.

I write similar documents for my work group, but mine aren't as helpful
and clear as yours is.

All the best,
Tom

-- 
Thomas S. Dye
http://www.tsdye.com

^ permalink raw reply	[flat|nested] 26+ messages in thread

* Re: Using Emacs, Org-mode and R for Research Writing in Social Sciencess
  2014-05-13 18:52   ` Vikas Rawal
@ 2014-05-14  3:38     ` Ken Mankoff
  2014-05-14  7:00       ` Vikas Rawal
  0 siblings, 1 reply; 26+ messages in thread
From: Ken Mankoff @ 2014-05-14  3:38 UTC (permalink / raw)
  To: Vikas Rawal; +Cc: org-mode mailing list

Hi Vikas

On 2014-05-13 at 12:52, Vikas Rawal <vikaslists@agrarianresearch.org> wrote:
>> 
>> You mentioning pandoc as one of the tools to use made me finally sit
>> down and look at it.  I am very glad I did.  Just today, I started
>> working on a paper that has to be in Word format in the end.  This is
>> always annoying but especially when the paper has mathematics in it.
>
> I have been totally addicted to Org-mode, and find it absurd to write
> in Word. On the other hand, none of my collaborators use LaTeX or
> Org. For a long time, I produced PDFs, circulated them, and then in
> the end, when others had to work on the document, bit my lip and
> converted it painfully to Word, manually fixing all LaTeX-specific
> stuff.
>
> Pandoc is a treat and clearly the way to go, at least until
> development of odt exporter catches up.

Your post gave me hope that Org -> LaTeX -> docx (via pandoc) would work
for me. It does not. The equations do not show up, among many other
issues.

I'm using Org 8.2.6, pandoc 1.12.3, Pages.app on OS X 10.9 and Word 2011
(v. 14.2.0).

I use pandoc like this:

pandoc -f latex -t docx test.tex -o test.docx

I see Org has exported my "W m^{-2}" as "W m$^{\text{-2}}$", which is
not what I would expect in LaTeX. In OS X Pages.app viewing the docx
this appears as "W m". In Word it shows up either as just "-2" or "W
m-2". In Word, the Math shows up with each character as a box (the math
is just missing in Pages). In Word the figures are missing (they appear
in Pages).

Can you clarify your Org -> LaTeX -> Docx workflow? It would be nice to
be able to do this.

Thanks,

  -k.

^ permalink raw reply	[flat|nested] 26+ messages in thread

* Re: Using Emacs, Org-mode and R for Research Writing in Social Sciencess
  2014-05-14  3:38     ` Using Emacs, Org-mode and R for Research Writing in Social Sciencess Ken Mankoff
@ 2014-05-14  7:00       ` Vikas Rawal
  2014-05-14  9:02         ` Christopher Witte
  2014-05-14 13:23         ` Ken Mankoff
  0 siblings, 2 replies; 26+ messages in thread
From: Vikas Rawal @ 2014-05-14  7:00 UTC (permalink / raw)
  To: Ken Mankoff; +Cc: org-mode mailing list

> 
> pandoc -f latex -t docx test.tex -o test.docx
> 
> I see Org has exported my "W m^{-2}" as "W m$^{\text{-2}}$", which is
> not what I would expect in LaTeX. In OS X Pages.app viewing the docx
> this appears as "W m". In Word it shows up either as just "-2" or "W
> m-2". In Word, the Math shows up with each character as a box (the math
> is just missing in Pages). In Word the figures are missing (they appear
> in Pages).
> 


First, you should differentiate between whether the problem is in Org->LaTeX conversion, or in LaTeX->Docx conversion. 

From what you describe above, the problem seems to be in Org->LaTeX conversion. 

For me, $W m^{-2}$ in Org produces correct LaTeX markup, and I get a good docx using Pandoc.

Vikas

^ permalink raw reply	[flat|nested] 26+ messages in thread

* Re: Using Emacs, Org-mode and R for Research Writing in Social Sciencess
  2014-05-14  7:00       ` Vikas Rawal
@ 2014-05-14  9:02         ` Christopher Witte
  2014-05-14 10:15           ` Vikas Rawal
  2014-05-14 13:23         ` Ken Mankoff
  1 sibling, 1 reply; 26+ messages in thread
From: Christopher Witte @ 2014-05-14  9:02 UTC (permalink / raw)
  To: org-mode mailing list

[-- Attachment #1: Type: text/plain, Size: 1058 bytes --]

The latest version of Pandoc can now also read in org mode files
http://johnmacfarlane.net/pandoc/releases.html#pandoc-1.12.4-07-may-2014
So perhaps the conversion of Org->Latex is no longer needed.

Chris.


On 14 May 2014 09:00, Vikas Rawal <vikaslists@agrarianresearch.org> wrote:

> >
> > pandoc -f latex -t docx test.tex -o test.docx
> >
> > I see Org has exported my "W m^{-2}" as "W m$^{\text{-2}}$", which is
> > not what I would expect in LaTeX. In OS X Pages.app viewing the docx
> > this appears as "W m". In Word it shows up either as just "-2" or "W
> > m-2". In Word, the Math shows up with each character as a box (the math
> > is just missing in Pages). In Word the figures are missing (they appear
> > in Pages).
> >
>
>
> First, you should differentiate between whether the problem is in
> Org->LaTeX conversion, or in LaTeX->Docx conversion.
>
> From what you describe above, the problem seems to be in Org->LaTeX
> conversion.
>
> For me, $W m^{-2}$ in Org produces correct LaTeX markup, and I get a good
> docx using Pandoc.
>
> Vikas
>

[-- Attachment #2: Type: text/html, Size: 1716 bytes --]

^ permalink raw reply	[flat|nested] 26+ messages in thread

* Re: Using Emacs, Org-mode and R for Research Writing in Social Sciencess
  2014-05-14  9:02         ` Christopher Witte
@ 2014-05-14 10:15           ` Vikas Rawal
  0 siblings, 0 replies; 26+ messages in thread
From: Vikas Rawal @ 2014-05-14 10:15 UTC (permalink / raw)
  To: Christopher Witte; +Cc: org-mode mailing list

[-- Attachment #1: Type: text/plain, Size: 465 bytes --]



> The latest version of Pandoc can now also read in org mode files http://johnmacfarlane.net/pandoc/releases.html#pandoc-1.12.4-07-may-2014
> So perhaps the conversion of Org->Latex is no longer needed.
> 

This is very new. As of now, direct Org->docx conversion does not taken into account any LaTeX-specific markup you may have in your Org file. Also, biblatex citations are not supported.

If you go Org->LaTeX->docx, it all works fine.

Vikas



[-- Attachment #2: Type: text/html, Size: 979 bytes --]

^ permalink raw reply	[flat|nested] 26+ messages in thread

* Re: Using Emacs, Org-mode and R for Research Writing in Social Sciencess
  2014-05-14  7:00       ` Vikas Rawal
  2014-05-14  9:02         ` Christopher Witte
@ 2014-05-14 13:23         ` Ken Mankoff
  2014-05-14 13:27           ` Vikas Rawal
  2014-05-14 13:27           ` Vikas Rawal
  1 sibling, 2 replies; 26+ messages in thread
From: Ken Mankoff @ 2014-05-14 13:23 UTC (permalink / raw)
  To: Vikas Rawal; +Cc: org-mode mailing list


On 2014-05-14 at 01:00, Vikas Rawal <vikaslists@agrarianresearch.org> wrote:
>> 
>> pandoc -f latex -t docx test.tex -o test.docx
>> 
>> I see Org has exported my "W m^{-2}" as "W m$^{\text{-2}}$", which is
>> not what I would expect in LaTeX. In OS X Pages.app viewing the docx
>> this appears as "W m". In Word it shows up either as just "-2" or "W
>> m-2". In Word, the Math shows up with each character as a box (the math
>> is just missing in Pages). In Word the figures are missing (they appear
>> in Pages).
>> 
>
> First, you should differentiate between whether the problem is in
> Org->LaTeX conversion, or in LaTeX->Docx conversion.
>
> From what you describe above, the problem seems to be in Org->LaTeX conversion. 
>
> For me, $W m^{-2}$ in Org produces correct LaTeX markup, and I get a good docx using Pandoc.

Yes that equation problem seems to be due to me and Org->LaTeX.

But elsewhere I have

\begin{equation}
x=42
\end{equation}

in Org, which looks just like that in LaTeX, and that appears as just
strange little extended ASCII boxes in MS Word.

  -k.

^ permalink raw reply	[flat|nested] 26+ messages in thread

* Re: Using Emacs, Org-mode and R for Research Writing in Social Sciencess
  2014-05-14 13:23         ` Ken Mankoff
@ 2014-05-14 13:27           ` Vikas Rawal
  2014-05-14 13:27           ` Vikas Rawal
  1 sibling, 0 replies; 26+ messages in thread
From: Vikas Rawal @ 2014-05-14 13:27 UTC (permalink / raw)
  To: Ken Mankoff; +Cc: org-mode mailing list

> 
> But elsewhere I have
> 
> \begin{equation}
> x=42
> \end{equation}
> 
> in Org, which looks just like that in LaTeX, and that appears as just
> strange little extended ASCII boxes in MS Word.
> 

I am on the latest version of Pandoc, and this works fine for me. 

Am sending you a sample off-list.

Vikas

^ permalink raw reply	[flat|nested] 26+ messages in thread

* Re: Using Emacs, Org-mode and R for Research Writing in Social Sciencess
  2014-05-14 13:23         ` Ken Mankoff
  2014-05-14 13:27           ` Vikas Rawal
@ 2014-05-14 13:27           ` Vikas Rawal
  1 sibling, 0 replies; 26+ messages in thread
From: Vikas Rawal @ 2014-05-14 13:27 UTC (permalink / raw)
  To: Ken Mankoff; +Cc: org-mode mailing list

> 
> But elsewhere I have
> 
> \begin{equation}
> x=42
> \end{equation}
> 
> in Org, which looks just like that in LaTeX, and that appears as just
> strange little extended ASCII boxes in MS Word.
> 

I am on the latest version of Pandoc, and this works fine for me. 

Am sending you a sample off-list.

Vikas

^ permalink raw reply	[flat|nested] 26+ messages in thread

* Re: Using Emacs, Org-mode and R for Research Writing in Social Sciences
  2014-05-12 12:57 Using Emacs, Org-mode and R for Research Writing in Social Sciences Vikas Rawal
  2014-05-12 13:26 ` Suvayu Ali
  2014-05-13 18:01 ` Eric S Fraga
@ 2014-05-14 14:07 ` Axel Kielhorn
  2014-05-14 16:51   ` Vikas Rawal
  2 siblings, 1 reply; 26+ messages in thread
From: Axel Kielhorn @ 2014-05-14 14:07 UTC (permalink / raw)
  To: Org-Mode Mailing List


Am 12.05.2014 um 14:57 schrieb Vikas Rawal <vikaslists@agrarianresearch.org>:

> I have been using Org for writing research papers for a while, gradually improving my set up to be able to exactly produce the output I want. In this process, I have benefited greatly not only from the resources available on the Org-mode website but also from various people who generously provided solutions to my numerous queries on this mailing list. I felt that it may be of some use if I put together all the pieces and document what I was doing.
> 
> I have put the draft for comments at: https://github.com/vikasrawal/orgpaper/blob/master/orgpapers.org

This looks like a workflow I may like.

A few comments:

I tried to export the .org to Latex and failed because it needed
tabulary and threeparttable.

They are used if you use vikas-general.org but as far as i understood the document that is just recommended.

I added the line 
#+LaTeX_HEADER: \usepackage{tabulary,threeparttable}
to the document.

Another problem I had are the URLs in the section titles.
They cause problems when running the tex file a second time.

Runaway argument?
{R \(` `\045\BOOKMARK [2][-]{subsection.2.4}{Pandoc}{section.2}\BOOKMARK \ETC.
! File ended while scanning use of \@@BOOKMARK.
<inserted text> 
                \par 

You may want to move the URLs from the section title to the body.

You are using straight (") quotation marks in org and the LaTeX export has straight quotation marks. Is there a way to convert them to “” or \enquote?

You are using

: #+LaTeX_CLASS_OPTIONS: [garamond]

which results in

\documentclass[garamond]{article}

But garamond is not a valid option for article.

I use this instead
#+Latex_HEADER: \usepackage{tgschola}

I tried ebgaramont, but that font does not contain TS1 support.

Now I have a printable version of your document and will have a closer look.

Greetings
Axel

^ permalink raw reply	[flat|nested] 26+ messages in thread

* Re: Using Emacs, Org-mode and R for Research Writing in Social Sciences
  2014-05-13 18:40           ` Vikas Rawal
@ 2014-05-14 14:19             ` Suvayu Ali
  2014-05-14 16:02               ` Vikas Rawal
  0 siblings, 1 reply; 26+ messages in thread
From: Suvayu Ali @ 2014-05-14 14:19 UTC (permalink / raw)
  To: emacs-orgmode

Hi Vikas,

On Tue, May 13, 2014 at 08:40:13PM +0200, Vikas Rawal wrote:
> > 
> > It seems safer/efficient to focus on making modular documentation that
> > is the definitive *best*/*right* way (and *best* explained) to do
> > something, and then to link to that prolifically.
> > 
> 
> Your points are very valid and expressed convincingly. 
> 
> Writing this document was a result of, first and foremost, a personal urge to write it, and secondly, in view of very specific use cases (my graduate students, to whom I wanted to provide a one-stop shop, before they explore rest of the stuff).
> 
> That said, your arguments that it is not optimal to include such a document as part of documentation on orgmode.org is perhaps right. I can see that maintaining modular non-repetitive content is easier. Long-term maintenance of documentation should be an important concern for something that is under heavy development. 
> 
> Unless others feel differently, I would let the document float around the cyberspace, on my personal website and on github, for anyone to discover and use.

I hate a good resource getting lost in the Internet.  So I would like to
suggest you make a shorter version for Worg, just focusing on the
"producing a complete document part": R, ESS, pandoc, and all.

Of course that requires more of your time and effort.  So how about
using Worg as it is meant to be, copy paste the relevant sections into
worg and collaboratively trim it down to shape?

If people think that is a good idea, I could give this a first shot
sometime next week.

Cheers,

-- 
Suvayu

Open source is the future. It sets us free.

^ permalink raw reply	[flat|nested] 26+ messages in thread

* Re: Using Emacs, Org-mode and R for Research Writing in Social Sciences
  2014-05-14 14:19             ` Suvayu Ali
@ 2014-05-14 16:02               ` Vikas Rawal
  0 siblings, 0 replies; 26+ messages in thread
From: Vikas Rawal @ 2014-05-14 16:02 UTC (permalink / raw)
  To: Suvayu Ali; +Cc: org-mode mailing list

>> 
>> Unless others feel differently, I would let the document float around the cyberspace, on my personal website and on github, for anyone to discover and use.
> 
> I hate a good resource getting lost in the Internet.  So I would like to
> suggest you make a shorter version for Worg, just focusing on the
> "producing a complete document part": R, ESS, pandoc, and all.
> 
> Of course that requires more of your time and effort.  So how about
> using Worg as it is meant to be, copy paste the relevant sections into
> worg and collaboratively trim it down to shape?
> If people think that is a good idea, I could give this a first shot
> sometime next week.
> 

It would be wonderful if you could. At least some people seem to think it is useful to have a guide of this kind.  If so, improving it together should be the way to go.

Vikas

^ permalink raw reply	[flat|nested] 26+ messages in thread

* Re: Using Emacs, Org-mode and R for Research Writing in Social Sciences
  2014-05-14 14:07 ` Using Emacs, Org-mode and R for Research Writing in Social Sciences Axel Kielhorn
@ 2014-05-14 16:51   ` Vikas Rawal
  2014-05-14 18:39     ` Axel Kielhorn
  0 siblings, 1 reply; 26+ messages in thread
From: Vikas Rawal @ 2014-05-14 16:51 UTC (permalink / raw)
  To: Axel Kielhorn, org-mode mailing list


Thank you Axel for taking the time to test it. I look forward to more comments as you look at it. You comments are very useful.

> 
> I tried to export the .org to Latex and failed because it needed
> tabulary and threeparttable.
> 
> They are used if you use vikas-general.org but as far as i understood the document that is just recommended.
> 
> I added the line 
> #+LaTeX_HEADER: \usepackage{tabulary,threeparttable}
> to the document.
> 

vikas-general.org (I already dislike my name being on that file) specifies these as part of org-latex-default-package-list, so both tabulary and threeparttable should get included by default.

I removed explicit inclusion of these packages from this document and the instructions, because I wanted to reduce the work in terms of setting things up.

> Another problem I had are the URLs in the section titles.
> They cause problems when running the tex file a second time.
> 
> Runaway argument?
> {R \(` `\045\BOOKMARK [2][-]{subsection.2.4}{Pandoc}{section.2}\BOOKMARK \ETC.
> ! File ended while scanning use of \@@BOOKMARK.
> <inserted text> 
>                \par 
> 
> You may want to move the URLs from the section title to the body.
> 

I thought I had fixed this. But will check again.

> You are using straight (") quotation marks in org and the LaTeX export has straight quotation marks. Is there a way to convert them to “” or \enquote?
> 

Should use 
(setq org-export-with-smart-quotes t)

Will add that to the revised abcd-general.org


> You are using
> 
> : #+LaTeX_CLASS_OPTIONS: [garamond]
> 
> which results in
> 
> \documentclass[garamond]{article}
> 
> But garamond is not a valid option for article.
> 

This is where I got this from

http://orgmode.org/worg/org-contrib/babel/examples/article-class.html#sec-4-3-2

I think it requires mathdesign to be loaded. But I will check.

Vikas

^ permalink raw reply	[flat|nested] 26+ messages in thread

* Re: Using Emacs, Org-mode and R for Research Writing in Social Sciences
  2014-05-14 16:51   ` Vikas Rawal
@ 2014-05-14 18:39     ` Axel Kielhorn
  2014-05-15  4:49       ` Vikas Rawal
  0 siblings, 1 reply; 26+ messages in thread
From: Axel Kielhorn @ 2014-05-14 18:39 UTC (permalink / raw)
  To: Org-Mode Mailing List


Am 14.05.2014 um 18:51 schrieb Vikas Rawal <vikaslists@agrarianresearch.org>:

> 
> Thank you Axel for taking the time to test it. I look forward to more comments as you look at it. You comments are very useful.

I'm new to Emacs, but know LaTeX and Pandoc.
I have a lot of beginner’s questions.
(Configuring emacs is quite difficult: should I use
- custom-set-variable
- starter-kit
- raw elisp in .emacs
)

In your document you are using alt instead of meta.
Not everyone uses alt for meta (especially on the Mac where alt (option) is used to access unusual characters).

>> I tried to export the .org to Latex and failed because it needed
>> tabulary and threeparttable.
>> 
>> They are used if you use vikas-general.org but as far as i understood the document that is just recommended.
>> 
>> I added the line 
>> #+LaTeX_HEADER: \usepackage{tabulary,threeparttable}
>> to the document.
>> 
> 
> vikas-general.org (I already dislike my name being on that file)

How about

config.org ?
config-example.org ?

And ask the user to copy it to $USER.org 

> I removed explicit inclusion of these packages from this document and the instructions, because I wanted to reduce the work in terms of setting things up.

You achieved the opposite.
Now a user *has* to enable the config file.
Otherwise it would be clear that additional packages may be needed which may not be part of a minimal TeX Live installation.


>> You are using
>> 
>> : #+LaTeX_CLASS_OPTIONS: [garamond]
>> 
>> which results in
>> 
>> \documentclass[garamond]{article}
>> 
>> But garamond is not a valid option for article.
>> 
> 
> This is where I got this from
> 
> http://orgmode.org/worg/org-contrib/babel/examples/article-class.html#sec-4-3-2
> 
> I think it requires mathdesign to be loaded. But I will check.

Yes, and some additional LaTeX coding.

I'll wait for the next release and have a closer look.

Axel

^ permalink raw reply	[flat|nested] 26+ messages in thread

* Re: Using Emacs, Org-mode and R for Research Writing in Social Sciences
  2014-05-14 18:39     ` Axel Kielhorn
@ 2014-05-15  4:49       ` Vikas Rawal
  2014-05-15  8:18         ` Axel Kielhorn
  2014-05-15 11:57         ` Axel Kielhorn
  0 siblings, 2 replies; 26+ messages in thread
From: Vikas Rawal @ 2014-05-15  4:49 UTC (permalink / raw)
  To: Axel Kielhorn; +Cc: org-mode mailing list

> 
>> 
>> Thank you Axel for taking the time to test it. I look forward to more comments as you look at it. You comments are very useful.
> 
> I'm new to Emacs, but know LaTeX and Pandoc.
> I have a lot of beginner’s questions.
> (Configuring emacs is quite difficult: should I use
> - custom-set-variable
> - starter-kit
> - raw elisp in .emacs
> )
> 

You could use either. 

I think starter-kit is a good choice. You will be up and running in no time. Just put it in place. 

If you are using the starter kit, you should create a sub-directory inside .emacs.d with your username. Any .org file or .el file you keep inside will be evaluated when you start emacs. 

If you put my config file in that sub-directory, you are good to go as far as my basic set up goes.

In addition, you could have your personal config files for whatever additional you want.

This is not necessarily “optimal”, but it will be quick and clean. As you learn, you can customise to make it optimal to your needs.

> In your document you are using alt instead of meta.
> Not everyone uses alt for meta (especially on the Mac where alt (option) is used to access unusual characters).
> 
>>> I tried to export the .org to Latex and failed because it needed
>>> tabulary and threeparttable.
>>> 
>>> They are used if you use vikas-general.org but as far as i understood the document that is just recommended.
>>> 
>>> I added the line 
>>> #+LaTeX_HEADER: \usepackage{tabulary,threeparttable}
>>> to the document.
>>> 
>> 
>> vikas-general.org (I already dislike my name being on that file)
> 
> How about
> 
> config.org ?
> config-example.org ?
> And ask the user to copy it to $USER.org 
> 

Yes, one of these, I guess. I want to leave $user.org for additional personal configurations that the person may want to do.

>> I removed explicit inclusion of these packages from this document and the instructions, because I wanted to reduce the work in terms of setting things up.
> 
> You achieved the opposite.
> Now a user *has* to enable the config file.
> Otherwise it would be clear that additional packages may be needed which may not be part of a minimal TeX Live installation.
> 

May be I should specify the packages that are being called, so the user can make sure those are installed or modify the config file. But I prefer the basic set of LaTeX packages being called by default rather than being added in every file.

Vikas

^ permalink raw reply	[flat|nested] 26+ messages in thread

* Re: Using Emacs, Org-mode and R for Research Writing in Social Sciences
  2014-05-15  4:49       ` Vikas Rawal
@ 2014-05-15  8:18         ` Axel Kielhorn
  2014-05-15  8:38           ` Vikas Rawal
  2014-05-15 11:57         ` Axel Kielhorn
  1 sibling, 1 reply; 26+ messages in thread
From: Axel Kielhorn @ 2014-05-15  8:18 UTC (permalink / raw)
  To: Org-Mode Mailing List


Am 15.05.2014 um 06:49 schrieb Vikas Rawal <vikaslists@agrarianresearch.org>:

>>> I removed explicit inclusion of these packages from this document and the instructions, because I wanted to reduce the work in terms of setting things up.
>> 
>> You achieved the opposite.
>> Now a user *has* to enable the config file.
>> Otherwise it would be clear that additional packages may be needed which may not be part of a minimal TeX Live installation.
>> 
> 
> May be I should specify the packages that are being called, so the user can make sure those are installed or modify the config file. But I prefer the basic set of LaTeX packages being called by default rather than being added in every file.

This will be a problem when one of your collaborators doesn't use your config files.
There are many packages for tabular/table environments.
Having them in the document gives a strong hint that there is something different that may collide with the packages another user prefers. (No-one can agree on a basic set of LaTeX packages:-)

If you keep them in the configuration file, the user has to extract the relevant information 

(setq org-latex-default-packages-alist …)

from your configuration and add it to their configuration file.

You can always supply a template file with all the relevant
+LaTeX_HEADER 
definitions.

You can even have lines like

#+LaTeX_HEADER: \usepackage{tabulary}   % provides column specification LCRJ
#+LaTeX_HEADER: \usepackage{threeparttable} % A table with cation and notes
#+LaTeX_HEADER: \renewcommand{\TPTminimum}{\linewidth} % configure threeparttable
#+Latex_HEADER: %\usepackage{tgschola}  % enable to use the Schola font
#+Latex_HEADER: %\usepackage{tgbonum}	% enable to use the Bonum font
#+Latex_HEADER: %\usepackage{tgpagella} % enable to use the Pagella font
#+Latex_HEADER: \usepackage[urw-garamond]{mathdesign} \linespread{1.0609}

and let the user decide which to use instead of hiding this in an option which requires modifications of the latex exporter.

(My Latex template has several pages of commented preamble. I activate only what I need but I have everything available, including common usage examples.)

But in the end this is your decision, you know what works best for your users and I know how to modify the configuration to suit my needs.

Axel

^ permalink raw reply	[flat|nested] 26+ messages in thread

* Re: Using Emacs, Org-mode and R for Research Writing in Social Sciences
  2014-05-15  8:18         ` Axel Kielhorn
@ 2014-05-15  8:38           ` Vikas Rawal
  0 siblings, 0 replies; 26+ messages in thread
From: Vikas Rawal @ 2014-05-15  8:38 UTC (permalink / raw)
  To: Axel Kielhorn; +Cc: org-mode mailing list

>>> 
>> 
>> May be I should specify the packages that are being called, so the user can make sure those are installed or modify the config file. But I prefer the basic set of LaTeX packages being called by default rather than being added in every file.
> 
> This will be a problem when one of your collaborators doesn't use your config files.
> There are many packages for tabular/table environments.
> Having them in the document gives a strong hint that there is something different that may collide with the packages another user prefers. (No-one can agree on a basic set of LaTeX packages:-)
> 
> If you keep them in the configuration file, the user has to extract the relevant information 
> 
> (setq org-latex-default-packages-alist …)
> 
> from your configuration and add it to their configuration file.
> 
> You can always supply a template file with all the relevant
> +LaTeX_HEADER 
> definitions.
> 
> You can even have lines like
> 
> #+LaTeX_HEADER: \usepackage{tabulary}   % provides column specification LCRJ
> #+LaTeX_HEADER: \usepackage{threeparttable} % A table with cation and notes
> #+LaTeX_HEADER: \renewcommand{\TPTminimum}{\linewidth} % configure threeparttable
> #+Latex_HEADER: %\usepackage{tgschola}  % enable to use the Schola font
> #+Latex_HEADER: %\usepackage{tgbonum}	% enable to use the Bonum font
> #+Latex_HEADER: %\usepackage{tgpagella} % enable to use the Pagella font
> #+Latex_HEADER: \usepackage[urw-garamond]{mathdesign} \linespread{1.0609}

This may be a better solution. We could even provide a separate file with sample lines that need to go at the top, which can be modified if needed, to be called in using #+INCLUDE: into a document.

Since Suvayu has offered to have a go at modifying the document for Worg, I would wait for him to do what he thinks may be best. 

Vikas

^ permalink raw reply	[flat|nested] 26+ messages in thread

* Re: Using Emacs, Org-mode and R for Research Writing in Social Sciences
  2014-05-15  4:49       ` Vikas Rawal
  2014-05-15  8:18         ` Axel Kielhorn
@ 2014-05-15 11:57         ` Axel Kielhorn
  1 sibling, 0 replies; 26+ messages in thread
From: Axel Kielhorn @ 2014-05-15 11:57 UTC (permalink / raw)
  To: Org-Mode Mailing List


Am 15.05.2014 um 06:49 schrieb Vikas Rawal <vikaslists@agrarianresearch.org>:

> 
> I think starter-kit is a good choice. You will be up and running in no time. Just put it in place. 
> 

Well, time moves differently around here.
Since I use Aquamacs it took me over a day to get it working.

A google sear gave me:

The starter kit is designed to be used with GNU Emacs. Version 24 or later is required, and the current released version (24.3) is recommended. It will not work with Aquamacs without modification.

Seriously? That it?
No "Here are the necessary modifications"?

It seems to work now.
I write a separate article to describe what I did.

Axel

^ permalink raw reply	[flat|nested] 26+ messages in thread

end of thread, other threads:[~2014-05-15 11:58 UTC | newest]

Thread overview: 26+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-05-12 12:57 Using Emacs, Org-mode and R for Research Writing in Social Sciences Vikas Rawal
2014-05-12 13:26 ` Suvayu Ali
2014-05-12 19:36   ` Vikas Rawal
2014-05-12 21:00     ` Thomas S. Dye
2014-05-13 17:48       ` Vikas Rawal
2014-05-13 18:15         ` John Hendy
2014-05-13 18:40           ` Vikas Rawal
2014-05-14 14:19             ` Suvayu Ali
2014-05-14 16:02               ` Vikas Rawal
2014-05-13 19:55         ` Thomas S. Dye
2014-05-13 18:01 ` Eric S Fraga
2014-05-13 18:52   ` Vikas Rawal
2014-05-14  3:38     ` Using Emacs, Org-mode and R for Research Writing in Social Sciencess Ken Mankoff
2014-05-14  7:00       ` Vikas Rawal
2014-05-14  9:02         ` Christopher Witte
2014-05-14 10:15           ` Vikas Rawal
2014-05-14 13:23         ` Ken Mankoff
2014-05-14 13:27           ` Vikas Rawal
2014-05-14 13:27           ` Vikas Rawal
2014-05-14 14:07 ` Using Emacs, Org-mode and R for Research Writing in Social Sciences Axel Kielhorn
2014-05-14 16:51   ` Vikas Rawal
2014-05-14 18:39     ` Axel Kielhorn
2014-05-15  4:49       ` Vikas Rawal
2014-05-15  8:18         ` Axel Kielhorn
2014-05-15  8:38           ` Vikas Rawal
2014-05-15 11:57         ` Axel Kielhorn

Code repositories for project(s) associated with this public inbox

	https://git.savannah.gnu.org/cgit/emacs/org-mode.git

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).