From: "Thomas S. Dye" <tsd@tsdye.com>
To: mike.mclean@pobox.com
Cc: emacs-orgmode@gnu.org, sp_us@yahoo.com
Subject: Re: Re: A LaTeX class for Org-mode export
Date: Thu, 25 Nov 2010 20:58:43 -1000 [thread overview]
Message-ID: <CE5356A7-8794-4F77-96AD-091AEDD643B7@tsdye.com> (raw)
In-Reply-To: <4CEF3850.6030408@pobox.com>
Aloha Mike,
Inconsolata is a pretty monospace font, but it appears it isn't widely
distributed yet. Another drawback is that it doesn't have a bold face
or an italics face. Many syntax highlighting schemes use these faces
to distinguish comments, reserved words, etc., so Inconsolata is
probably not a good choice for org-article. I'll replace it in the
future, but until then a font set like Times that uses Courier as its
monospace font is probably a better way to go.
Tom
On Nov 25, 2010, at 6:32 PM, Mike McLean wrote:
> FWIW, I got past the same error by NOT including the line to add to
> latex-packages-alist in my .emacs.
>
> ;; (add-to-list 'org-export-latex-packages-alist '(("AUTO"
> "inputenc" t)))
>
> My configuration is completely different that Srinivs, too: MacOSX -
> Emacs 24.0.50.2 from source - Org mode from git (pre-release) to
> 25-November (88bd7bb).
>
>
>
>
>> Tom,
>>
>> I tried to run and produce PDF using Miktex 2.8 on Windows (Emacs
>> 23.1). I get
>> an error:
>>
>> (C:\bin\miktex-2.8\tex\latex\inconsolata\inconsolata.sty))
>>
>> ! LaTeX Error: File `nil.sty' not found.
>>
>> and the PDF is not produced. I am a newbie at trying LaTeX so don't
>> know quite
>> where to begin solving the problem. Any help is much appreciated.
>>
>> Any tips to solve this problem?
>>
>> - Srinivas
>>
>> PS. Attached is the log:
>>
>> This is pdfTeX, Version 3.1415926-1.40.10 (MiKTeX 2.8)
>> entering extended mode
>>
>> ("c:/Documents and Settings/srinivas/my documents/org-files/src/
>> article-
>> class.te
>> x"
>> LaTeX2e <2009/09/24>
>> Babel <v3.8l> and hyphenation patterns for english, dumylang,
>> nohyphenation, ge
>> rman, ngerman, german-x-2009-06-19, ngerman-x-2009-06-19, french,
>> loaded.
>> ("c:\Documents and Settings\srinivas\my documents\org-files\src\org-
>> article.cls"
>> Document Class: org-article 2010/09/19 0.2 (TSD)
>> (C:\bin\miktex-2.8\tex\latex\base\ifthen.sty)
>> (C:\bin\miktex-2.8\tex\latex\tools\calc.sty)
>> (C:\bin\miktex-2.8\tex\generic\oberdiek\ifpdf.sty)
>> (C:\bin\miktex-2.8\tex\latex\koma-script\scrartcl.cls
>> Document Class: scrartcl 2010/06/17 v3.06 KOMA-Script document class
>> (article)
>> (C:\bin\miktex-2.8\tex\latex\koma-script\scrkbase.sty
>> (C:\bin\miktex-2.8\tex\latex\koma-script\scrbase.sty
>> (C:\bin\miktex-2.8\tex\latex\graphics\keyval.sty)
>> (C:\bin\miktex-2.8\tex\latex\koma-script\scrlfile.sty
>> Package scrlfile, 2009/03/25 v3.03 KOMA-Script package (loading
>> files)
>> Copyright (C) Markus Kohm
>>
>> ))) (C:\bin\miktex-2.8\tex\latex\koma-script\tocbasic.sty)
>> (C:\bin\miktex-2.8\tex\latex\koma-script\scrsize11pt.clo)
>> (C:\bin\miktex-2.8\tex\latex\koma-script\typearea.sty
>> Package typearea, 2010/06/17 v3.06 KOMA-Script package (type area)
>> Copyright (C) Frank Neukam, 1992-1994
>> Copyright (C) Markus Kohm, 1994-
>>
>>
>> Package typearea Warning: Maybe no optimal type area settings!
>> (typearea) The maximum limit of line width is about
>> 17%
>> (typearea) larger than the heuristically detected line
>> width.
>> (typearea) You may e.g. increase DIV, decrease
>> fontsize
>> (typearea) or change the papersize.
>>
>> )) (C:\bin\miktex-2.8\tex\latex\base\fixltx2e.sty)
>> (C:\bin\miktex-2.8\tex\latex\graphics\graphicx.sty
>> (C:\bin\miktex-2.8\tex\latex\graphics\graphics.sty
>> (C:\bin\miktex-2.8\tex\latex\graphics\trig.sty)
>> (C:\bin\miktex-2.8\tex\latex\00miktex\graphics.cfg)
>> (C:\bin\miktex-2.8\tex\latex\pdftex-def\pdftex.def)))
>> (C:\bin\miktex-2.8\tex\latex\tools\longtable.sty)
>> (C:\bin\miktex-2.8\tex\latex\float\float.sty)
>> (C:\bin\miktex-2.8\tex\latex\wrapfig\wrapfig.sty)
>> (C:\bin\miktex-2.8\tex\latex\soul\soul.sty)
>> (C:\bin\miktex-2.8\tex\latex\base\fontenc.sty
>> (C:\bin\miktex-2.8\tex\latex\base\t1enc.def))
>> (C:\bin\miktex-2.8\tex\latex\base\textcomp.sty
>> (C:\bin\miktex-2.8\tex\latex\base\ts1enc.def))
>> (C:\bin\miktex-2.8\tex\latex\marvosym\marvosym.sty)
>> (C:\bin\miktex-2.8\tex\latex\wasysym\wasysym.sty)
>> (C:\bin\miktex-2.8\tex\latex\base\latexsym.sty)
>> (C:\bin\miktex-2.8\tex\latex\hyperref\hyperref.sty
>> (C:\bin\miktex-2.8\tex\generic\oberdiek\ltxcmds.sty)
>> (C:\bin\miktex-2.8\tex\generic\oberdiek\kvsetkeys.sty
>> (C:\bin\miktex-2.8\tex\generic\oberdiek\infwarerr.sty)
>> (C:\bin\miktex-2.8\tex\generic\oberdiek\etexcmds.sty))
>> (C:\bin\miktex-2.8\tex\generic\oberdiek\pdfescape.sty
>> (C:\bin\miktex-2.8\tex\generic\oberdiek\pdftexcmds.sty
>> (C:\bin\miktex-2.8\tex\generic\oberdiek\ifluatex.sty)))
>> (C:\bin\miktex-2.8\tex\generic\oberdiek\ifvtex.sty)
>> (C:\bin\miktex-2.8\tex\latex\ifxetex\ifxetex.sty)
>> (C:\bin\miktex-2.8\tex\latex\oberdiek\hycolor.sty
>> (C:\bin\miktex-2.8\tex\latex\oberdiek\xcolor-patch.sty))
>> (C:\bin\miktex-2.8\tex\latex\oberdiek\letltxmacro.sty)
>> (C:\bin\miktex-2.8\tex\latex\hyperref\pd1enc.def)
>> (C:\bin\miktex-2.8\tex\generic\oberdiek\intcalc.sty)
>> (C:\bin\miktex-2.8\tex\latex\00miktex\hyperref.cfg)
>> (C:\bin\miktex-2.8\tex\latex\oberdiek\kvoptions.sty)
>> Implicit mode ON; LaTeX internals redefined
>> (C:\bin\miktex-2.8\tex\latex\ltxmisc\url.sty)
>> (C:\bin\miktex-2.8\tex\generic\oberdiek\bitset.sty
>> (C:\bin\miktex-2.8\tex\generic\oberdiek\bigintcalc.sty))
>> (C:\bin\miktex-2.8\tex\generic\oberdiek\atbegshi.sty))
>> * hyperref using default driver hpdftex *
>> (C:\bin\miktex-2.8\tex\latex\hyperref\hpdftex.def
>> (C:\bin\miktex-2.8\tex\latex\oberdiek\atveryend.sty)
>> (C:\bin\miktex-2.8\tex\latex\oberdiek\rerunfilecheck.sty
>> (C:\bin\miktex-2.8\tex\generic\oberdiek\uniquecounter.sty)))
>> (C:\bin\miktex-2.8\tex\latex\paralist\paralist.sty)
>> (C:\bin\miktex-2.8\tex\latex\microtype\microtype.sty
>> (C:\bin\miktex-2.8\tex\latex\microtype\microtype.cfg))
>> (C:\bin\miktex-2.8\tex\latex\listings\listings.sty
>> (C:\bin\miktex-2.8\tex\latex\listings\lstmisc.sty)
>> (C:\bin\miktex-2.8\tex\latex\listings\listings.cfg))
>> (C:\bin\miktex-2.8\tex\latex\graphics\color.sty
>> (C:\bin\miktex-2.8\tex\latex\00miktex\color.cfg))
>> (C:\bin\miktex-2.8\tex\latex\base\fontenc.sty
>> (C:\bin\miktex-2.8\tex\latex\base\t1enc.def))
>> (C:\bin\miktex-2.8\tex\latex\mathdesign\mathdesign.sty
>> (C:\bin\miktex-2.8\tex\latex\mathdesign\mdput\mdput.cfg)
>> (C:\bin\miktex-2.8\tex\latex\mathdesign\mdput\mdput.sty
>> (C:\bin\miktex-2.8\tex\latex\mathdesign\mdfont.def)
>> (C:\bin\miktex-2.8\tex\latex\mathdesign\mdsffont.def)
>> (C:\bin\miktex-2.8\tex\latex\mathdesign\mdttfont.def)
>> (C:\bin\miktex-2.8\tex\latex\mathdesign\mdput\t1mdput.fd))
>> (C:\bin\miktex-2.8\tex\latex\base\fontenc.sty
>> (C:\bin\miktex-2.8\tex\latex\base\t1enc.def)))
>> (C:\bin\miktex-2.8\tex\latex\bera\berasans.sty)
>> (C:\bin\miktex-2.8\tex\latex\inconsolata\inconsolata.sty))
>>
>> ! LaTeX Error: File `nil.sty' not found.
>>
>> Type X to quit or <RETURN> to proceed,
>> or enter new name. (Default extension: sty)
>>
>> Enter file name:
>> ! Emergency stop.
>> <read *>
>>
>> l.6 \providecommand
>> {\alert}[1]{\textbf{#1}}
>>
>> ! ==> Fatal error occurred, no output PDF file produced!
>> Transcript written on article-class.log.
>
>
> _______________________________________________
> Emacs-orgmode mailing list
> Please use `Reply All' to send replies to the list.
> Emacs-orgmode@gnu.org
> http://lists.gnu.org/mailman/listinfo/emacs-orgmode
next prev parent reply other threads:[~2010-11-26 6:59 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-11-26 4:32 A LaTeX class for Org-mode export Mike McLean
2010-11-26 6:58 ` Thomas S. Dye [this message]
-- strict thread matches above, loose matches on Subject: below --
2010-09-22 23:26 Srinivas Pavani
2010-09-23 14:52 ` Thomas S. Dye
2010-09-14 20:37 Thomas S. Dye
2010-09-14 21:36 ` Scot Becker
2010-09-14 23:28 ` Thomas S. Dye
2010-09-22 2:44 ` Srinivas
2010-09-22 3:35 ` Thomas S. Dye
2010-09-22 4:44 ` Srinivas Pavani
2010-09-22 5:31 ` Thomas S. Dye
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
List information: https://www.orgmode.org/
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CE5356A7-8794-4F77-96AD-091AEDD643B7@tsdye.com \
--to=tsd@tsdye.com \
--cc=emacs-orgmode@gnu.org \
--cc=mike.mclean@pobox.com \
--cc=sp_us@yahoo.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
Code repositories for project(s) associated with this public inbox
https://git.savannah.gnu.org/cgit/emacs/org-mode.git
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).